Download or read book Model Based Requirements Engineering written by Jon Holt and published by IET. This book was released on 2011-11-10 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a hands-on introduction to model-based requirements engineering and management by describing a set of views that form the basis for the approach. These views take into account each individual requirement in terms of its description, but then also provide each requirement with meaning by putting it into the correct 'context'. A requirement that has been put into a context is known as a 'use case' and may be based upon either stakeholders or levels of hierarchy in a system. Each use case must then be analysed and validated by defining a combination of scenarios and formal mathematical and logic-based proofs that provide the rigour required for safety-critical and mission-critical systems.
Download or read book Environment Modeling Based Requirements Engineering for Software Intensive Systems written by Zhi Jin and published by Morgan Kaufmann. This book was released on 2017-12-05 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environment Modeling-Based Requirements Engineering for Software Intensive Systems provides a new and promising approach for engineering the requirements of software-intensive systems, presenting a systematic, promising approach to identifying, clarifying, modeling, deriving, and validating the requirements of software-intensive systems from well-modeled environment simulations. In addition, the book presents a new view of software capability, i.e. the effect-based software capability in terms of environment modeling. Provides novel and systematic methodologies for engineering the requirements of software-intensive systems Describes ontologies and easily-understandable notations for modeling software-intensive systems Analyzes the functional and non-functional requirements based on the properties of the software surroundings Provides an essential, practical guide and formalization tools for the task of identifying the requirements of software-intensive systems Gives system analysts and requirements engineers insight into how to recognize and structure the problems of developing software-intensive systems
Download or read book Practical Model Based Systems Engineering written by Jose L. Fernandez and published by Artech House. This book was released on 2019-07-31 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive resource provides systems engineers and practitioners with the analytic, design and modeling tools of the Model-Based Systems Engineering (MBSE) methodology of Integrated Systems Engineering (ISE) and Pipelines of Processes in Object Oriented Architectures (PPOOA) methodology. This methodology integrates model based systems and software engineering approaches for the development of complex products, including aerospace, robotics and energy domains applications. Readers learn how to synthesize physical architectures using design heuristics and trade-off analysis. The book provides information about how to identify, classify and specify the system requirements of a new product or service. Using Systems Modeling Language (SysML) constructs, readers will be able to apply ISE & PPOOA methodology in the engineering activities of their own systems.
Download or read book Requirements Engineering written by Elizabeth Hull and published by Springer Science & Business Media. This book was released on 2010-10-05 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for those who want to develop their knowledge of requirements engineering process, whether practitioners or students. Using the latest research and driven by practical experience from industry, Requirements Engineering gives useful hints to practitioners on how to write and structure requirements. It explains the importance of Systems Engineering and the creation of effective solutions to problems. It describes the underlying representations used in system modeling and introduces the UML2, and considers the relationship between requirements and modeling. Covering a generic multi-layer requirements process, the book discusses the key elements of effective requirements management. The latest version of DOORS (Version 7) - a software tool which serves as an enabler of a requirements management process - is also introduced to the reader here. Additional material and links are available at: http://www.requirementsengineering.info
Download or read book SysML for Systems Engineering written by Jon Holt and published by Institution of Engineering and Technology. This book was released on 2019-01-11 with total page 881 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systems Modelling Language (SysML) is a tailored version of the unified modelling language (UML) that meets the needs of today's systems engineering professionals and engineers. It supports the specification, analysis, design, verification and validation of a broad range of systems and systems-of-systems, including hardware, software, information, personnel, procedures, and facilities in a graphical notation. SysML for Systems Engineering: A model-based approach provides a comprehensive overview on how to implement SysML and Model-based Systems Engineering (MBSE) in an organisation in order to model real projects effectively and efficiently. Topics covered include approach and concepts; SysML notation; diagramming guidelines; process and requirements modelling with MBSE; architectures and architectural frameworks with MBSE; value chain modelling; deploying MBSE; the benefits of MBSE; the 'people', the 'process' and the 'tool'; model structure and management; and model maturity. A detailed case study is included to illustrate the key concepts. Fully updated and revised to reflect the latest version of the standard (SysML 1.5, released in May 2017), this new edition also includes new chapters on the benefits of MBSE, model management, model maturity and value chain modelling.
Download or read book Smart Product Engineering written by Michael Abramovici and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 1009 pages. Available in PDF, EPUB and Kindle. Book excerpt: The collection of papers in this book comprises the proceedings of the 23rd CIRP Design Conference held between March 11th and March 13th 2013 at the Ruhr-Universität Bochum in Germany. The event was organized in cooperation with the German Academic Society for Product Development – WiGeP. The focus of the conference was on »Smart Product Engineering«, covering two major aspects of modern product creation: the development of intelligent (“smart”) products as well as the new (“smart”) approach of engineering, explicitly taking into account consistent systems integration. Throughout the 97 papers contained in these proceedings, a range of topics are covered, amongst them the different facets and aspects of what makes a product or an engineering solution “smart”. In addition, the conference papers investigate new ways of engineering for production planning and collaboration towards Smart Product Engineering. The publications provide a solid insight into the pressing issues of modern digital product creation facing increasing challenges in a rapidly changing industrial environment. They also give implicit advice how a “smart” product or engineering solution (processes, methods and tools) needs to be designed and implemented in order to become successful.
Download or read book Software Systems Requirements Engineering In Practice written by Brian Berenbach and published by McGraw Hill Professional. This book was released on 2009-03-03 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proven Software & Systems Requirements Engineering Techniques "Requirements engineering is a discipline used primarily for large and complex applications. It is more formal than normal methods of gathering requirements, and this formality is needed for many large applications. The authors are experienced requirements engineers, and this book is a good compendium of sound advice based on practical experience." --Capers Jones, Chief Scientist Emeritus, Software Productivity Research Deliver feature-rich products faster, cheaper, and more reliably using state-of-the-art SSRE methods and modeling procedures. Written by global experts, Software & Systems Requirements Engineering: In Practice explains how to effectively manage project objectives and user needs across the entire development lifecycle. Gather functional and quality attribute requirements, work with models, perform system tests, and verify compliance. You will also learn how to mitigate risks, avoid requirements creep, and sidestep the pitfalls associated with large, complex projects. Define and prioritize customer expectations using taxonomies Elicit and analyze functional and quality attribute requirements Develop artifact models, meta-models, and prototypes Manage platform and product line development requirements Derive and generate test cases from UML activity diagrams Deploy validation, verification, and rapid development procedures Handle RE for globally distributed software and system development projects Perform hazard analysis, risk assessment, and threat modeling
Download or read book Effective Model Based Systems Engineering written by John M. Borky and published by Springer. This book was released on 2018-09-08 with total page 779 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents a proven, mature Model-Based Systems Engineering (MBSE) methodology that has delivered success in a wide range of system and enterprise programs. The authors introduce MBSE as the state of the practice in the vital Systems Engineering discipline that manages complexity and integrates technologies and design approaches to achieve effective, affordable, and balanced system solutions to the needs of a customer organization and its personnel. The book begins with a summary of the background and nature of MBSE. It summarizes the theory behind Object-Oriented Design applied to complex system architectures. It then walks through the phases of the MBSE methodology, using system examples to illustrate key points. Subsequent chapters broaden the application of MBSE in Service-Oriented Architectures (SOA), real-time systems, cybersecurity, networked enterprises, system simulations, and prototyping. The vital subject of system and architecture governance completes the discussion. The book features exercises at the end of each chapter intended to help readers/students focus on key points, as well as extensive appendices that furnish additional detail in particular areas. The self-contained text is ideal for students in a range of courses in systems architecture and MBSE as well as for practitioners seeking a highly practical presentation of MBSE principles and techniques.
Download or read book Process for System Architecture and Requirements Engineering written by Derek Hatley and published by Addison-Wesley. This book was released on 2013-08-02 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the digital version of the printed book (Copyright © 2000). Derek Hatley and Imtiaz Pirbhai—authors of Strategies for Real-Time System Specification—join with influential consultant Peter Hruschka to present a much anticipated update to their widely implemented Hatley/Pirbhai methods. Process for System Architecture and Requirements Engineering introduces a new approach that is particularly useful for multidisciplinary system development: It applies equally well to all technologies and thereby provides a common language for developers in widely differing disciplines. The Hatley-Pirbhai-Hruschka approach (H/H/P) has another important feature: the coexistence of the requirements and architecture methods and of the corresponding models they produce. These two models are kept separate, but the approach fully records their ongoing and changing interrelationships. This feature is missing from virtually all other system and software development methods and from CASE tools that only automate the requirements model. System managers, system architects, system engineers, and managers and engineers in all of the diverse engineering technologies will benefit from this comprehensive, pragmatic text. In addition to its models of requirements and architecture and of the development process itself, the book uses in-depth case studies of a hospital monitoring system and of a multidisciplinary groundwater analysis system to illustrate the principles. Compatibility Between the H/H/P Methods and the UML: The Hatley/Pirbhai architecture and requirements methods—described in Strategies for Real-Time System Specification—have been widely used for almost two decades in system and software development. Now known as the Hatley/Hruschka/Pirbhai (H/H/P) methods, they have always been compatible with object-oriented software techniques, such as the UML, by defining architectural elements as classes, objects, messages, inheritance relationships, and so on. In Process for System Architecture and Requirements Engineering, that compatibility is made more specific through the addition of message diagrams, inheritance diagrams, and new notations that go with them. In addition, state charts, while never excluded, are now specifically included as a representation of sequential machines. These additions make definition of the system/software boundary even more straightforward, while retaining the clear separation of requirements and design at the system levels that is a hallmark of the H/H/P methods—not shared by most OO techniques. Once the transition to software is made, the developer is free to continue using the H/H/P methods, or to use the UML or any other software-specific technique.
Download or read book Requirements Engineering written by Axel van Lamsweerde and published by Wiley Global Education. This book was released on 2014-09-23 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a disciplined approach to the engineering of high-quality requirements. The approach covers the entire requirements lifecycle and integrates state-of-the-art techniques for requirements elicitation, evaluation, specification, analysis, and evolution. Modeling plays a central role in this approach. Rich, requirements-specific models provide a common interface to the various RE activities. Such models capture the multiple facets of the system-as-is and the system-to-be, comprising both software and environment components. The book puts a strong emphasis on systematic, replicable techniques for requirements engineering.
Download or read book Foundations for Model based Systems Engineering written by Jon Holt and published by IET. This book was released on 2016-05-31 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The practice of Model-Based Systems Engineering (MBSE) is becoming more widely adopted in industry, academia and commerce; as the use of modelling matures in the real world, so the need increases for more guidance on how to model effectively and efficiently. This practical book describes a number of systems-level "patterns" that may be applied using the systems modelling language SysML for the development of any number of different applications and as the foundations for a system model. This is a companion volume to both SysML for Systems Engineering: A Model-Based Approach and Model-based Requirements Engineering, both published by the IET. Whereas the previous volumes presented the case for modelling and provided an indepth overview of SysML, this book focuses on a set of "patterns" as the basis of an MBSE model and their use in today's systems engineering community. Topics covered include an introduction to MBSE concepts, ontology and frameworks; what is a pattern?; interface definition pattern; traceability pattern; test case pattern; epoch/measurement pattern; life cycle pattern; evidence pattern; description pattern; context pattern; analysis risk pattern; requirements engineering - ACRE; system of systems requirements - SoS-ACRE; process modelling - '7 views'; competency modelling; life cycle management; project information modelling; model maturity levels; technology readiness levels; defi ning the patterns; using patterns for model assessment, model definition, and model retro-fitting. Foundations for Model-Based Systems Engineering is essential reading for researchers and students of systems modelling in academia, as well as systems engineers, requirements engineers, software engineers, systems managers, requirements managers, and systems modelers in industry.
Download or read book Design Requirements Engineering A Ten Year Perspective written by Kalle Lyytinen and published by Springer Science & Business Media. This book was released on 2009-01-20 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its inception in 1968, software engineering has undergone numerous changes. In the early years, software development was organized using the waterfall model, where the focus of requirements engineering was on a frozen requirements document, which formed the basis of the subsequent design and implementation process. Since then, a lot has changed: software has to be developed faster, in larger and distributed teams, for pervasive as well as large-scale applications, with more flexibility, and with ongoing maintenance and quick release cycles. What do these ongoing developments and changes imply for the future of requirements engineering and software design? Now is the time to rethink the role of requirements and design for software intensive systems in transportation, life sciences, banking, e-government and other areas. Past assumptions need to be questioned, research and education need to be rethought. This book is based on the Design Requirements Workshop, held June 3-6, 2007, in Cleveland, OH, USA, where leading researchers met to assess the current state of affairs and define new directions. The papers included were carefully reviewed and selected to give an overview of the current state of the art as well as an outlook on probable future challenges and priorities. After a general introduction to the workshop and the related NSF-funded project, the contributions are organized in topical sections on fundamental concepts of design; evolution and the fluidity of design; quality and value-based requirements; requirements intertwining; and adapting requirements practices in different domains.
Download or read book Requirements Engineering written by Elizabeth Hull and published by Springer Science & Business Media. This book was released on 2005-12-06 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for those who want to develop their knowledge of requirements engineering process, whether practitioners or students. Using the latest research and driven by practical experience from industry, Requirements Engineering gives useful hints to practitioners on how to write and structure requirements. It explains the importance of Systems Engineering and the creation of effective solutions to problems. It describes the underlying representations used in system modeling and introduces the UML2, and considers the relationship between requirements and modeling. Covering a generic multi-layer requirements process, the book discusses the key elements of effective requirements management. The latest version of DOORS (Version 7) - a software tool which serves as an enabler of a requirements management process - is also introduced to the reader here. Additional material and links are available at: http://www.requirementsengineering.info
Download or read book Systems Engineering for Automotive Powertrain Development written by Hannes Hick and published by Springer. This book was released on 2021-02-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the last century, the automotive industry has been dominated by internal combustion engines. Their flexibility of application, driving range, performance and sporty characteristics has resulted in several generations of this technology and has formed generations of engineers. But that is not the end of the story. Stricter legislation and increased environmental awareness have resulted in the development of new powertrain technologies in addition and parallel to the highly optimized internal combustion engine. Hybrid powertrains systems, pure battery electric systems and fuel cell systems, in conjunction with a diverse range of applications, have increased the spectrum of powertrain technologies. Furthermore, automated driving together with intelligent and highly connected systems are changing the way to get from A to B. Not only is the interaction of all these new technologies challenging, but also several different disciplines have to collaborate intensively in order for new powertrain systems to be successfully developed. These new technologies and the resulting challenges lead to an increase in system complexity. Approaches such as systems engineering are necessary to manage this complexity. To show how systems engineering manages the increasing complexity of modern powertrain systems, by providing processes, methods, organizational aspects and tools, this book has been structured into five parts. Starting with Challenges for Powertrain Development, which describes automotive-related challenges at different levels of the system hierarchy and from different point of views. The book then continues with the core part, Systems Engineering, in which all the basics of systems engineering, model-based systems engineering, and their related processes, methods, tools, and organizational matters are described. A special focus is placed on important standards and the human factor. The third part, Automotive Powertrain Systems Engineering Approach, puts the fundamentals of systems engineering into practice by adding the automotive context. This part focuses on system development and also considers the interactions to hardware and software development. Several approaches and methods are presented based on systems engineering philosophy. Part four, Powertrain Development Case Studies, adds the practical point of view by providing a range of case studies on powertrain system level and on powertrain element level and discusses the development of hybrid powertrain, internal combustion engines, e-drives, transmissions, batteries and fuel cell systems. Two case studies on a vehicle level are also presented. The final part, Outlook, considers the development of systems engineering itself with particular focus on information communication technologies. Even though this book covers systems engineering from an automotive perspective, many of the challenges, fundamental principles, conclusions and outlooks can be applied to other domains too. Therefore, this book is not only relevant for automotive engineers and students, but also for specialists in scientific and industrial positions in other domains and anyone who has to cope with the challenge of successfully developing complex systems with a large number of collaborating disciplines.
Download or read book System Requirements Engineering written by Jean-Yves Bron and published by John Wiley & Sons. This book was released on 2020-07-16 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Primer for Model Based Systems Engineering written by David Long and published by Lulu.com. This book was released on 2012-03-09 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This primer addresses the basic concepts of model-based systems engineering. It covers the Model, Language, Behavior, Process, Architecture, and Verification and Validation. It is a call to consider the foundational principles behind those concepts. It is not designed to present novel insights into MBSE so much as to provide a guided tour of the touchstones of systems design. It is a guide to the new MBSE acolyte and a reminder to the experienced practitioner. It is our hope that you find this primer valuable. We welcome your comments and suggestions about improving it. Much of what we have learned about how it should be organized and presented has come from thoughtful contributions from the readers of the 1st edition.
Download or read book Model based Requirements Engineering for Multifunctional Systems written by Andreas Vogelsang and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: