Download or read book Mode III Fatigue Crack Growth Under Combined Torsional and Axial Loading written by FA. McClintock and published by . This book was released on 1985 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: An investigation has been made into the propagation of fatigue cracks in Mode III (anti-plane shear) in circumferentially notched cylindrical specimens subjected to cyclic torsion with and without small superimposed static tension loading. Studies were performed in a range of low-alloy steels of yield strengths varying from 310 to 1625 MN/m2, with the objective of characterizing both constant amplitude and variable amplitude Mode III crack growth behavior. Rates of fatigue crack propagation in Mode III were found to be characterized uniquely by the Mode III cyclic crack tip displacement (?CTDIII) or the plastic strain intensity range (??III) for elastic/plastic and fully plastic conditions, only if allowance was made for friction, rubbing, and interlocking between sliding crack surfaces (crack surface interference) through superposition of small axial loads. Such Mode III crack advance is envisaged in terms of Mode II shear coalescence of microcracks initiated at inclusions in the immediate vicinity of, and parallel to, the main crack front, consistent with micromechanical modelling studies incorporating either instantaneous crack tip displacement or damage accumulation arguments. The application of such models to the prediction of Mode III fatigue crack propagation behavior under both constant amplitude and simple variable amplitude loading spectra is briefly reviewed.

Download or read book Basic Questions in Fatigue written by Jeffrey T. Fong and published by ASTM International. This book was released on 1988 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multiaxial Fatigue written by Keith John Miller and published by ASTM International. This book was released on 1985 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multiaxial Fatigue and Deformation written by Sreeramesh Kalluri and published by ASTM International. This book was released on 2000 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers from a May 1999 symposium, describing state-of-the-art multiaxial testing techniques and analytical methods for characterizing fatigue and deformation behaviors of engineering materials. Papers are classified into sections on multiaxial strength of materials, multiaxial deformation,

Download or read book Combined Mode Low Cycle Fatigue Crack Growth Under Torsional Loading written by WW. Wilkening and published by . This book was released on 1988 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: Faults or other disturbances in an electrical distribution system can potentially feed back to the turbine-generator and produce large-amplitude torsional oscillations in the turbine-generator shaft. These transient torques, in combination with gravity-induced and misalignment-induced bending stresses in the shaft, can give rise to significant combined-mode fatigue crack growth phenomena. Prediction of the fatigue damage or of the growth rate of existing flaws under these complex loading conditions has been the subject of numerous investigations in the past. The work described here focuses upon the development of a correlation of the experimentally measured combined-mode fatigue crack growth rate (FCGR) with a suitable fracture mechanics characterizing parameter.

Download or read book Multiaxial Fatigue written by Darrell Socie and published by SAE International. This book was released on 1999-12-15 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides practicing engineers, researchers, and students with a working knowledge of the fatigue design process and models under multiaxial states of stress and strain. Readers are introduced to the important considerations of multiaxial fatigue that differentiate it from uniaxial fatigue.

Download or read book Mixed mode Crack Behavior written by Keith John Miller and published by ASTM International. This book was released on 1999 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Comprehensive Structural Integrity Cyclic loading and fatigue written by I. Milne and published by Elsevier. This book was released on 2003 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Fatigue Science and Technology written by C. Moura Branco and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 982 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the edited version of lectures and selected research contributions presented at the NATO ADVANCED STUDY INSTITUTE on ADVANCES IN FATIGUE SCIENCE AND TECHNOLOGY. held in Alvor. Portugal, 4th to 15th of April 1988. and organized by CEMUL - Center of Mechanics and Materials of The Technical University of Lisbon. The Institute was attended by 101 participants, including 15 lecturers. from 14 countries. The participants were leading scientists and engineers from universities, research institutions and industry. and also Ph.D~ students. Some participants presented papers during the Institute reporting the state-of-art of their research projects. All the sessions wel'e very active and quite extensive discussions on scientific aspects took place during the Institute. The Advanced Study Institute provided a forum for interaction among eminent scientists and engineers. from different schools of thought and young researchers. The Institute addressed the foundations and current state of the art of essential aspects related to fatigue science and technology, namely: Short Cracks, Metallurgical Aspects, Environmental Fatigue, Threshold Behaviour, Notch Behaviour. Creep and Fatigue Interactions at High Temperature, Multiaxial Fatigue, Low Cycle Fatigue, Methodology of Fatigue Testing, Variable Amplitude Fatigue, Fatigue of Advanced Materials. Elastic-Plastic Fatigue, and several engineering applications such as welded joints, energy systems, offshore structures, automotive industry, machine and engine components. This book is organized in three parts: Part I: Fundamentals of Fatigue Part II: Engineering Applications Part III: Research Contributions The research contributions covered most of the areas referred above.

Download or read book Mathematical and Computational Analyses of Cracking Formation written by Yoichi Sumi and published by Springer. This book was released on 2014-06-11 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about the pattern formation and the evolution of crack propagation in engineering materials and structures, bridging mathematical analyses of cracks based on singular integral equations, to computational simulation of engineering design. The first two parts of this book focus on elasticity and fracture and provide the basis for discussions on fracture morphology and its numerical simulation, which may lead to a simulation-based fracture control in engineering structures. Several design concepts are discussed for the prevention of fatigue and fracture in engineering structures, including safe-life design, fail-safe design, damage tolerant design. After starting with basic elasticity and fracture theories in parts one and two, this book focuses on the fracture morphology that develops due to the propagation of brittle cracks or fatigue cracks. In part three, the mathematical analysis of a curved crack is precisely described, based on the perturbation method. The stability theory of interactive cracks propagating in brittle solids may help readers to understand the formation of a fractal-like cracking patterns in brittle solids, while the stability theory of crack paths helps to identify the straight versus sharply curved or sometimes wavy crack paths observed in brittle solids. In part four, the numerical simulation method of a system of multiple cracks is introduced by means of the finite element method, which may be used for the better implementation of fracture control in engineering structures. This book is part of a series on “Mathematics for Industry” and will appeal to structural engineers seeking to understand the basic backgrounds of analyses, but also to mathematicians with an interest in how such mathematical solutions are evaluated in industrial applications.

Download or read book Fracture Mechanics written by Walter G. Reuter and published by ASTM International. This book was released on 1995 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multiaxial Fatigue and Fracture written by E. Macha and published by Elsevier. This book was released on 1999-09-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 18 papers selected from 90 presented at the Fifth International Conference on Biaxial/Multiaxial Fatigue and Fracture held in Cracow, Poland 8-12 September 1997. The papers in this book deal with theoretical, computational and experimental aspects of the multiaxial fatigue and fracture of engineering materials and structures. The papers are divided into the following four categories: 1. Proportional cyclic loading 2. Non-proportional cyclic loading 3. Variable amplitude and random loading 4. Crack growthMost papers in this publication talk about the behaviour of constructional materials and elements of machines under non-proportional loading and under variable amplitude and random loading, which are more realistic load histories met in industrial practice. Variable amplitude loading under cyclic load with basic frequency and random loading under load with a continuous band of frequency is classified here. This book gives a review of the latest world success and directions of investigations on multiaxial fatigue and fracture. More and more often publications are results of the co-operation of researchers from different laboratories and countries. Seven out of eighteen papers included here were worked out by international authors teams. This is a symptom of the times, when science and investigations know no borders.

Download or read book Nonlinear Fracture Mechanics Time dependent fracture written by Ashok Saxena and published by ASTM International. This book was released on 1988 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Micromechanisms of Fracture and Fatigue written by Jaroslav Pokluda and published by Springer Science & Business Media. This book was released on 2010-05-27 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromechanisms of Fracture and Fatigue forms the culmination of 20 years of research in the field of fatigue and fracture. It discusses a range of topics and comments on the state of the art for each. The first part is devoted to models of deformation and fracture of perfect crystals. Using various atomistic methods, the theoretical strength of solids under simple and complex loading is calculated for a wide range of elements and compounds, and compared with experimental data. The connection between the onset of local plasticity in nanoindentation tests and the ideal shear strength is analysed using a multi-scale approach. Moreover, the nature of intrinsic brittleness or ductility of perfect crystal lattices is demonstrated by the coupling of atomistic and mesoscopic approaches, and compared with brittle/ductile behaviour of engineering materials. The second part addresses extrinsic sources of fracture toughness of engineering materials, related to their microstructure and microstructurally-induced crack tortuosity. Micromechanisms of ductile fracture are also described, in relation to the fracture strain of materials. Results of multilevel modelling, including statistical aspects of microstructure, are used to explain remarkable phenomena discovered in experiments. In the third part of the book, basic micromechanisms of fatigue cracks propagation under uniaxial and multiaxial loading are discussed on the basis of the unified mesoscopic model of crack tip shielding and closure, taking both microstructure and statistical effects into account. Applications to failure analysis are also outlined, and an attempt is made to distinguish intrinsic and extrinsic sources of materials resistance to fracture. Micromechanisms of Fracture and Fatigue provides scientists, researchers and postgraduate students with not only a deep insight into basic micromechanisms of fracture behaviour of materials, but also a number of engineering applications.

Download or read book Proceedings of the Air Force Conference on Fatigue and Fracture of Aircraft Structures and Materials written by Air Force Flight Dynamics Laboratory (U.S.) and published by . This book was released on 1971 with total page 924 pages. Available in PDF, EPUB and Kindle. Book excerpt: The document is comprised of papers presented at the Air Force Conference on Fatigue of Aircraft Structures and Materials, sponsored by the Air Force Flight Dynamics Laboratory (AFFDL) and the Air Force Materials Laboratory (AFML), Air Force Systems Command. The purpose of the Conference was to discuss technological advancements in fatigue and fracture theory. The Conference was comprised of ten technical sessions (including two panel discussions) entitled 'The Role of Materials in Structures'; 'Fundamentals I + II'; 'Criteria'; 'Fracture I + II'; 'Phenomena I + II'; 'Analysis'; 'Design and Service Experience'. A total of fifty-six technical papers were presented.

Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Small Fatigue Cracks written by K.S. Ravichandran and published by Elsevier. This book was released on 1999-09-30 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the fully peer-reviewed papers presented at the Third Engineering Foundation Conference on Small Fatigue Cracks, held under the chairmanship of K.S. Ravichandran and Y. Murakami during December 6-11, 1998, at the Turtle Bay Hilton, Oahu, Hawaii. This book presents a state-of-the-art description of the mechanics, mechanisms and applications of small fatigue cracks by most of the world's leading experts in this field. Topics ranging from the mechanisms of crack initiation, small crack behavior in metallic, intermetallic, ceramic and composite materials, experimental measurement, mechanistic and theoretical models, to the role of small cracks in fretting fatigue and the application of small crack results to the aging aircraft and high-cycle fatigue problems, are covered.