Download or read book Mixed Signal Embedded Systems Design written by Edward H. Currie and published by Springer Nature. This book was released on 2021-11-27 with total page 891 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook introduces readers to mixed-signal, embedded design and provides, in one place, much of the basic information to engage in serious mixed-signal design using Cypress' PSoC. Designing with PSoC technology can be a challenging undertaking, especially for the novice. This book brings together a wealth of information gathered from a large number of sources and combines it with the fundamentals of mixed-signal, embedded design, making the PSoC learning curve ascent much less difficult. The book covers, sensors, digital logic, analog components, PSoC peripherals and building blocks in considerable detail, and each chapter includes illustrative examples, exercises, and an extensive bibliography.

Download or read book Introduction to Mixed Signal Embedded Design written by Alex Doboli and published by Springer Science & Business Media. This book was released on 2010-12-17 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is written for junior/senior undergraduate and first-year graduate students in the electrical and computer engineering departments. Using PSoC mixed-signal array design, the authors define the characteristics of embedd design, embedded mixed-signal architectures, and top-down design. Optimized implementations of these designs are included to illustrate the theory. Exercises are provided at the end of each chapter for practice. Topics covered include the hardware and software used to implement analog and digital interfaces, various filter structures, amplifiers and other signal-conditioning circuits, pulse-width modulators, timers, and data structures for handling multiple similar peripheral devices. The practical exercises contained in the companion laboratory manual, which was co-authored by Cypress Staff Applications Engineer Dave Van Ess, are also based on PSoC. PSoC's integrated microcontroller, highly configurable analog/digital peripherals, and a full set of development tools make it an ideal learning tool for developing mixed-signal embedded design skills.

Download or read book Extreme Low Power Mixed Signal IC Design written by Armin Tajalli and published by Springer Science & Business Media. This book was released on 2010-09-14 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design exibility and power consumption in addition to the cost, have always been the most important issues in design of integrated circuits (ICs), and are the main concerns of this research, as well. Energy Consumptions: Power dissipation (P ) and energy consumption are - diss pecially importantwhen there is a limited amountof power budgetor limited source of energy. Very common examples are portable systems where the battery life time depends on system power consumption. Many different techniques have been - veloped to reduce or manage the circuit power consumption in this type of systems. Ultra-low power (ULP) applications are another examples where power dissipation is the primary design issue. In such applications, the power budget is so restricted that very special circuit and system level design techniquesare needed to satisfy the requirements. Circuits employed in applications such as wireless sensor networks (WSN), wearable battery powered systems [1], and implantable circuits for biol- ical applications need to consume very low amount of power such that the entire system can survive for a very long time without the need for changingor recharging battery[2–4]. Using newpowersupplytechniquessuchas energyharvesting[5]and printable batteries [6], is another reason for reducing power dissipation. Devel- ing special design techniques for implementing low power circuits [7–9], as well as dynamic power management (DPM) schemes [10] are the two main approaches to control the system power consumption. Design Flexibility: Design exibility is the other important issue in modern in- grated systems.

Download or read book Mixed signal and DSP Design Techniques written by Analog Devices, inc and published by Newnes. This book was released on 2003-01-02 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sampled Data Systems - ADCs for DSP Applications - DACs for DSP Applications - Fast Fourier Transforms - Digital Filters - DSP Hardware - Interfacing to DSPs - DSP Applications - Hardware Design Techniques.

Download or read book Embedded System Design written by Peter Marwedel and published by Springer Science & Business Media. This book was released on 2010-11-16 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until the late 1980s, information processing was associated with large mainframe computers and huge tape drives. During the 1990s, this trend shifted toward information processing with personal computers, or PCs. The trend toward miniaturization continues and in the future the majority of information processing systems will be small mobile computers, many of which will be embedded into larger products and interfaced to the physical environment. Hence, these kinds of systems are called embedded systems. Embedded systems together with their physical environment are called cyber-physical systems. Examples include systems such as transportation and fabrication equipment. It is expected that the total market volume of embedded systems will be significantly larger than that of traditional information processing systems such as PCs and mainframes. Embedded systems share a number of common characteristics. For example, they must be dependable, efficient, meet real-time constraints and require customized user interfaces (instead of generic keyboard and mouse interfaces). Therefore, it makes sense to consider common principles of embedded system design. Embedded System Design starts with an introduction into the area and a survey of specification models and languages for embedded and cyber-physical systems. It provides a brief overview of hardware devices used for such systems and presents the essentials of system software for embedded systems, like real-time operating systems. The book also discusses evaluation and validation techniques for embedded systems. Furthermore, the book presents an overview of techniques for mapping applications to execution platforms. Due to the importance of resource efficiency, the book also contains a selected set of optimization techniques for embedded systems, including special compilation techniques. The book closes with a brief survey on testing. Embedded System Design can be used as a text book for courses on embedded systems and as a source which provides pointers to relevant material in the area for PhD students and teachers. It assumes a basic knowledge of information processing hardware and software. Courseware related to this book is available at http://ls12-www.cs.tu-dortmund.de/~marwedel.

Download or read book Mixed Signal Methodology Guide written by Jess Chen and published by Lulu.com. This book was released on 2012 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, the Mixed-signal Methodology Guide: Advanced Methodology for AMS IP and SoC Design, Verification, and Implementation provides a broad overview of the design, verification and implementation methodologies required for today's mixed-signal designs. The book covers mixed-signal design trends and challenges, abstraction of analog using behavioral models, assertion-based metric-driven verification methodology applied on analog and mixed-signal and verification of low power intent in mixed-signal design. It also describes methodology for physical implementation in context of concurrent mixed-signal design and for handling advanced node physical effects. The book contains many practical examples of models and techniques. The authors believe it should serve as a reference to many analog, digital and mixed-signal designers, verification, physical implementation engineers and managers in their pursuit of information for a better methodology required to address the challenges of modern mixed-signal design.

Download or read book DSP Software Development Techniques for Embedded and Real Time Systems written by Robert Oshana and published by Elsevier. This book was released on 2006-01-09 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's embedded and real-time systems contain a mix of processor types: off-the-shelf microcontrollers, digital signal processors (DSPs), and custom processors. The decreasing cost of DSPs has made these sophisticated chips very attractive for a number of embedded and real-time applications, including automotive, telecommunications, medical imaging, and many others—including even some games and home appliances. However, developing embedded and real-time DSP applications is a complex task influenced by many parameters and issues. DSP Software Development Techniques for Embedded and Real-Time Systems is an introduction to DSP software development for embedded and real-time developers giving details on how to use digital signal processors efficiently in embedded and real-time systems. The book covers software and firmware design principles, from processor architectures and basic theory to the selection of appropriate languages and basic algorithms. The reader will find practical guidelines, diagrammed techniques, tool descriptions, and code templates for developing and optimizing DSP software and firmware. The book also covers integrating and testing DSP systems as well as managing the DSP development effort. - Digital signal processors (DSPs) are the future of microchips! - Includes practical guidelines, diagrammed techniques, tool descriptions, and code templates to aid in the development and optimization of DSP software and firmware

Download or read book Nanoelectronic Mixed Signal System Design written by Saraju Mohanty and published by McGraw Hill Professional. This book was released on 2015-02-20 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering both the classical and emerging nanoelectronic technologies being used in mixed-signal design, this book addresses digital, analog, and memory components. Winner of the Association of American Publishers' 2016 PROSE Award in the Textbook/Physical Sciences & Mathematics category. Nanoelectronic Mixed-Signal System Design offers professionals and students a unified perspective on the science, engineering, and technology behind nanoelectronics system design. Written by the director of the NanoSystem Design Laboratory at the University of North Texas, this comprehensive guide provides a large-scale picture of the design and manufacturing aspects of nanoelectronic-based systems. It features dual coverage of mixed-signal circuit and system design, rather than just digital or analog-only. Key topics such as process variations, power dissipation, and security aspects of electronic system design are discussed. Top-down analysis of all stages--from design to manufacturing Coverage of current and developing nanoelectronic technologies--not just nano-CMOS Describes the basics of nanoelectronic technology and the structure of popular electronic systems Reveals the techniques required for design excellence and manufacturability

Download or read book Embedded Microcontroller Interfacing written by Gourab Sen Gupta and published by Springer Science & Business Media. This book was released on 2010-07-15 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mixed-Signal Embedded Microcontrollers are commonly used in integrating analog components needed to control non-digital electronic systems. They are used in automatically controlled devices and products, such as automobile engine control systems, wireless remote controllers, office machines, home appliances, power tools, and toys. Microcontrollers make it economical to digitally control even more devices and processes by reducing the size and cost, compared to a design that uses a separate microprocessor, memory, and input/output devices. In many undergraduate and post-graduate courses, teaching of mixed-signal microcontrollers and their use for project work has become compulsory. Students face a lot of difficulties when they have to interface a microcontroller with the electronics they deal with. This book addresses some issues of interfacing the microcontrollers and describes some project implementations with the Silicon Lab C8051F020 mixed–signal microcontroller. The intended readers are college and university students specializing in electronics, computer systems engineering, electrical and electronics engineering; researchers involved with electronics based system, practitioners, technicians and in general anybody interested in microcontrollers based projects.

Download or read book Introduction to Embedded Systems Second Edition written by Edward Ashford Lee and published by MIT Press. This book was released on 2017-01-06 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the engineering principles of embedded systems, with a focus on modeling, design, and analysis of cyber-physical systems. The most visible use of computers and software is processing information for human consumption. The vast majority of computers in use, however, are much less visible. They run the engine, brakes, seatbelts, airbag, and audio system in your car. They digitally encode your voice and construct a radio signal to send it from your cell phone to a base station. They command robots on a factory floor, power generation in a power plant, processes in a chemical plant, and traffic lights in a city. These less visible computers are called embedded systems, and the software they run is called embedded software. The principal challenges in designing and analyzing embedded systems stem from their interaction with physical processes. This book takes a cyber-physical approach to embedded systems, introducing the engineering concepts underlying embedded systems as a technology and as a subject of study. The focus is on modeling, design, and analysis of cyber-physical systems, which integrate computation, networking, and physical processes. The second edition offers two new chapters, several new exercises, and other improvements. The book can be used as a textbook at the advanced undergraduate or introductory graduate level and as a professional reference for practicing engineers and computer scientists. Readers should have some familiarity with machine structures, computer programming, basic discrete mathematics and algorithms, and signals and systems.

Download or read book DSP Based Testing of Analog and Mixed Signal Circuits written by Matthew Mahoney and published by John Wiley & Sons. This book was released on 1987-05-11 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Answers the commonly asked questions about how digital signal processing-based machines work and what role DSP plays in the process. It shows you how DSP performs in real-test situations and uses mathematical concepts rather than derivations. The text addresses difficult test problems and their solutions resulting from the union of automatic test equipment (ATE) and DSP. The author establishes a philosophy of DSP-based testing describing how to think, how to approach a problem, how to create a solution, and how to determine if it really works properly.

Download or read book CMOS MIXED SIGNAL CIRCUIT DESIGN written by R. Jacob Baker and published by John Wiley & Sons. This book was released on 2008-06 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special Features: · Written by the author of the best-seller, CMOS: Circuit Design, Layout, and Simulation· Fills a hole in the technical literature for an advanced-tutorial book on mixed-signal circuit design from a circuit designer's point of view· Presents more advance topics, and will be an excellent companion to the first volume About The Book: This book will fill a hole in the technical literature for an advanced-tutorial book on mixed-signal circuit design. There are no competitors in this area. Mixed-signal design is performed in industry by a select few gurus . The techniques can be found in hard-to-digest technical papers.

Download or read book Embedded Systems Design Using the TI MSP430 Series written by Chris Nagy and published by Elsevier. This book was released on 2003-10-17 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn about designing, programming, and developing with the popular new Texas Instruments family of microcontrollers, the MSP430 series with this new book from Chris Nagy. This product line is experiencing explosive growth due to its low-power consumption and powerful features, but very little design and application information is available other than what is offered by the manufacturer. The book fills a gap in the technical literature for embedded systems engineers by offering a more complete combination of technical data, example code, and descriptive prose than is available from the manufacturer reference information, and is useful to both professionals and hobbyists.Intended for embedded engineers who are new to the embedded field, or for the thousands of engineers who have experience with other microcontrollers (such as PICs, 8051s, or Motorola HC0x devices) but are new to the MSP430 line, Chris Nagy offers a thorough and practical description of the device features, gives development guidelines, and provides design examples. Code examples are used in virtually every chapter and online. The book is divided into three sections: the first section provides detailed descriptions of the devices themselves; the second describes hardware/firmware development for the devices; the third is designed to incorporate information from the first two, and provide guidelines and examples of designs. - Get up-to-speed on the TI MSP430 product family's features and idiosyncrasies - A 'hand-holding' reference to help get started on designs

Download or read book Digital Design of Signal Processing Systems written by Shoab Ahmed Khan and published by John Wiley & Sons. This book was released on 2011-07-28 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Design of Signal Processing Systems discusses a spectrum of architectures and methods for effective implementation of algorithms in hardware (HW). Encompassing all facets of the subject this book includes conversion of algorithms from floating-point to fixed-point format, parallel architectures for basic computational blocks, Verilog Hardware Description Language (HDL), SystemVerilog and coding guidelines for synthesis. The book also covers system level design of Multi Processor System on Chip (MPSoC); a consideration of different design methodologies including Network on Chip (NoC) and Kahn Process Network (KPN) based connectivity among processing elements. A special emphasis is placed on implementing streaming applications like a digital communication system in HW. Several novel architectures for implementing commonly used algorithms in signal processing are also revealed. With a comprehensive coverage of topics the book provides an appropriate mix of examples to illustrate the design methodology. Key Features: A practical guide to designing efficient digital systems, covering the complete spectrum of digital design from a digital signal processing perspective Provides a full account of HW building blocks and their architectures, while also elaborating effective use of embedded computational resources such as multipliers, adders and memories in FPGAs Covers a system level architecture using NoC and KPN for streaming applications, giving examples of structuring MATLAB code and its easy mapping in HW for these applications Explains state machine based and Micro-Program architectures with comprehensive case studies for mapping complex applications The techniques and examples discussed in this book are used in the award winning products from the Center for Advanced Research in Engineering (CARE). Software Defined Radio, 10 Gigabit VoIP monitoring system and Digital Surveillance equipment has respectively won APICTA (Asia Pacific Information and Communication Alliance) awards in 2010 for their unique and effective designs.

Download or read book Embedded Systems Design with Special Arithmetic and Number Systems written by Amir Sabbagh Molahosseini and published by Springer. This book was released on 2017-03-20 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to alternative approaches to designing efficient embedded systems using unconventional number systems. The authors describe various systems that can be used for designing efficient embedded and application-specific processors, such as Residue Number System, Logarithmic Number System, Redundant Binary Number System Double-Base Number System, Decimal Floating Point Number System and Continuous Valued Number System. Readers will learn the strategies and trade-offs of using unconventional number systems in application-specific processors and be able to apply and design appropriate arithmetic operations from these number systems to boost the performance of digital systems.

Download or read book The Designer s Guide to Verilog AMS written by Ken Kundert and published by Springer Science & Business Media. This book was released on 2005-12-19 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Verilog Hardware Description Language (Verilog-HDL) has long been the most popular language for describing complex digital hardware. It started life as a prop- etary language but was donated by Cadence Design Systems to the design community to serve as the basis of an open standard. That standard was formalized in 1995 by the IEEE in standard 1364-1995. About that same time a group named Analog Verilog International formed with the intent of proposing extensions to Verilog to support analog and mixed-signal simulation. The first fruits of the labor of that group became available in 1996 when the language definition of Verilog-A was released. Verilog-A was not intended to work directly with Verilog-HDL. Rather it was a language with Similar syntax and related semantics that was intended to model analog systems and be compatible with SPICE-class circuit simulation engines. The first implementation of Verilog-A soon followed: a version from Cadence that ran on their Spectre circuit simulator. As more implementations of Verilog-A became available, the group defining the a- log and mixed-signal extensions to Verilog continued their work, releasing the defi- tion of Verilog-AMS in 2000. Verilog-AMS combines both Verilog-HDL and Verilog-A, and adds additional mixed-signal constructs, providing a hardware description language suitable for analog, digital, and mixed-signal systems. Again, Cadence was first to release an implementation of this new language, in a product named AMS Designer that combines their Verilog and Spectre simulation engines.

Download or read book The Design Warrior s Guide to FPGAs written by Clive Maxfield and published by Elsevier. This book was released on 2004-06-16 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Field Programmable Gate Arrays (FPGAs) are devices that provide a fast, low-cost way for embedded system designers to customize products and deliver new versions with upgraded features, because they can handle very complicated functions, and be reconfigured an infinite number of times. In addition to introducing the various architectural features available in the latest generation of FPGAs, The Design Warrior's Guide to FPGAs also covers different design tools and flows.This book covers information ranging from schematic-driven entry, through traditional HDL/RTL-based simulation and logic synthesis, all the way up to the current state-of-the-art in pure C/C++ design capture and synthesis technology. Also discussed are specialist areas such as mixed hardward/software and DSP-based design flows, along with innovative new devices such as field programmable node arrays (FPNAs). Clive "Max" Maxfield is a bestselling author and engineer with a large following in the electronic design automation (EDA)and embedded systems industry. In this comprehensive book, he covers all the issues of interest to designers working with, or contemplating a move to, FPGAs in their product designs. While other books cover fragments of FPGA technology or applications this is the first to focus exclusively and comprehensively on FPGA use for embedded systems. - First book to focus exclusively and comprehensively on FPGA use in embedded designs - World-renowned best-selling author - Will help engineers get familiar and succeed with this new technology by providing much-needed advice on choosing the right FPGA for any design project