Download or read book Parallel Computing Fundamentals Applications and New Directions written by E.H. D'Hollander and published by Elsevier. This book was released on 1998-07-22 with total page 765 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gives an overview of the state-of-the-art with respect to the development of all types of parallel computers and their application to a wide range of problem areas. The international conference on parallel computing ParCo97 (Parallel Computing 97) was held in Bonn, Germany from 19 to 22 September 1997. The first conference in this biannual series was held in 1983 in Berlin. Further conferences were held in Leiden (The Netherlands), London (UK), Grenoble (France) and Gent (Belgium). From the outset the aim with the ParCo (Parallel Computing) conferences was to promote the application of parallel computers to solve real life problems. In the case of ParCo97 a new milestone was reached in that more than half of the papers and posters presented were concerned with application aspects. This fact reflects the coming of age of parallel computing. Some 200 papers were submitted to the Program Committee by authors from all over the world. The final programme consisted of four invited papers, 71 contributed scientific/industrial papers and 45 posters. In addition a panel discussion on Parallel Computing and the Evolution of Cyberspace was held. During and after the conference all final contributions were refereed. Only those papers and posters accepted during this final screening process are included in this volume. The practical emphasis of the conference was accentuated by an industrial exhibition where companies demonstrated the newest developments in parallel processing equipment and software. Speakers from participating companies presented papers in industrial sessions in which new developments in parallel computing were reported.

Download or read book The Computer Engineering Handbook written by Vojin G. Oklobdzija and published by CRC Press. This book was released on 2001-12-26 with total page 1409 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is arguably no field in greater need of a comprehensive handbook than computer engineering. The unparalleled rate of technological advancement, the explosion of computer applications, and the now-in-progress migration to a wireless world have made it difficult for engineers to keep up with all the developments in specialties outside their own

Download or read book On line Error Detection and Fast Recover Techniques for Dependable Embedded Processors written by Matthias Pflanz and published by Springer Science & Business Media. This book was released on 2002-02-27 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a new approach to on-line observation and concurrent checking of processors by refining and improving known techniques and introducing new ideas. The proposed on-line error detection and fast recover techniques support and complement other established methods. In combination with other on-line observation priniciples and with a combined hardware-software test, these techniques are used to fulfill a complete self-check scheme for an embedded processor.

Download or read book Formal Equivalence Checking and Design Debugging written by Shi-Yu Huang and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Formal Equivalence Checking and Design Debugging covers two major topics in design verification: logic equivalence checking and design debugging. The first part of the book reviews the design problems that require logic equivalence checking and describes the underlying technologies that are used to solve them. Some novel approaches to the problems of verifying design revisions after intensive sequential transformations such as retiming are described in detail. The second part of the book gives a thorough survey of previous and recent literature on design error diagnosis and design error correction. This part also provides an in-depth analysis of the algorithms used in two logic debugging software programs, ErrorTracer and AutoFix, developed by the authors. From the Foreword: `With the adoption of the static sign-off approach to verifying circuit implementations the application-specific integrated circuit (ASIC) industry will experience the first radical methodological revolution since the adoption of logic synthesis. Equivalence checking is one of the two critical elements of this methodological revolution. This book is timely for either the designer seeking to better understand the mechanics of equivalence checking or for the CAD researcher who wishes to investigate well-motivated research problems such as equivalence checking of retimed designs or error diagnosis in sequential circuits.' Kurt Keutzer, University of California, Berkeley

Download or read book Proceedings written by and published by . This book was released on 1995 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Euro DAC 95 European Design Automation Conference with Euro VHDL written by and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1995 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book EURO DAC written by and published by . This book was released on 1995 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Index to IEEE Publications written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1996 with total page 1212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues for 1973- cover the entire IEEE technical literature.

Download or read book Applied Science Technology Index written by and published by . This book was released on 1996 with total page 1720 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bibliographic Index written by and published by . This book was released on 1997 with total page 1176 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multiphysics Simulation by Design for Electrical Machines Power Electronics and Drives written by Marius Rosu and published by John Wiley & Sons. This book was released on 2017-12-18 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents applied theory and advanced simulation techniques for electric machines and drives This book combines the knowledge of experts from both academia and the software industry to present theories of multiphysics simulation by design for electrical machines, power electronics, and drives. The comprehensive design approach described within supports new applications required by technologies sustaining high drive efficiency. The highlighted framework considers the electric machine at the heart of the entire electric drive. The book also emphasizes the simulation by design concept—a concept that frames the entire highlighted design methodology, which is described and illustrated by various advanced simulation technologies. Multiphysics Simulation by Design for Electrical Machines, Power Electronics and Drives begins with the basics of electrical machine design and manufacturing tolerances. It also discusses fundamental aspects of the state of the art design process and includes examples from industrial practice. It explains FEM-based analysis techniques for electrical machine design—providing details on how it can be employed in ANSYS Maxwell software. In addition, the book covers advanced magnetic material modeling capabilities employed in numerical computation; thermal analysis; automated optimization for electric machines; and power electronics and drive systems. This valuable resource: Delivers the multi-physics know-how based on practical electric machine design methodologies Provides an extensive overview of electric machine design optimization and its integration with power electronics and drives Incorporates case studies from industrial practice and research and development projects Multiphysics Simulation by Design for Electrical Machines, Power Electronics and Drives is an incredibly helpful book for design engineers, application and system engineers, and technical professionals. It will also benefit graduate engineering students with a strong interest in electric machines and drives.

Download or read book The Analysis of Directional Time Series Applications to Wind Speed and Direction written by Jens Breckling and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given a series of wind speeds and directions from the port of Fremantle the aim of this monograph is to detect general weather patterns and seasonal characteristics. To separate the daily land and sea breeze cycle and other short-term disturbances from the general wind, the series is divided into a daily and a longer term, synoptic component. The latter is related to the atmospheric pressure field, while the former is studied in order i) to isolate particular short-term events such as calms, storms and oscillating winds, and ii) to determine the land and sea breeze cycle which dominates the weather pattern for most of the year. All these patterns are described in detail and are related to the synoptic component of the data. Two time series models for directional data and a new measure of angular association are introduced to provide the basis for certain parts of the analysis.

Download or read book Laser Assisted Microtechnology written by Simeon M. Metev and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser-Assisted Microtechnology deals with laser applications to a wide variety of problems in microelectronic design and fabrication. It covers micromachining of thin films, microprocessing of materials, maskless laser micropatterning and laser-assisted synthesis of thin-film systems. The monograph describes fundamental aspects and practical details of the technological processes as well as the optimum conditions for their realization.

Download or read book Cracking Digital VLSI Verification Interview written by Robin Garg and published by . This book was released on 2016-03-13 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: How should I prepare for a Digital VLSI Verification Interview? What all topics do I need to know before I turn up for an interview? What all concepts do I need to brush up? What all resources do I have at my disposal for preparation? What does an Interviewer expect in an Interview? These are few questions almost all individuals ponder upon before an interview. If you have these questions in your mind, your search ends here as keeping these questions in their minds, authors have written this book that will act as a golden reference for candidates preparing for Digital VLSI Verification Interviews. Aim of this book is to enable the readers practice and grasp important concepts that are applicable to Digital VLSI Verification domain (and Interviews) through Question and Answer approach. To achieve this aim, authors have not restricted themselves just to the answer. While answering the questions in this book, authors have taken utmost care to explain underlying fundamentals and concepts. This book consists of 500+ questions covering wide range of topics that test fundamental concepts through problem statements (a common interview practice which the authors have seen over last several years). These questions and problem statements are spread across nine chapters and each chapter consists of questions to help readers brush-up, test, and hone fundamental concepts that form basis of Digital VLSI Verification. The scope of this book however, goes beyond technical concepts. Behavioral skills also form a critical part of working culture of any company. Hence, this book consists of a section that lists down behavioral interview questions as well. Topics covered in this book:1. Digital Logic Design (Number Systems, Gates, Combinational, Sequential Circuits, State Machines, and other Design problems)2. Computer Architecture (Processor Architecture, Caches, Memory Systems)3. Programming (Basics, OOP, UNIX/Linux, C/C++, Perl)4. Hardware Description Languages (Verilog, SystemVerilog)5. Fundamentals of Verification (Verification Basics, Strategies, and Thinking problems)6. Verification Methodologies (UVM, Formal, Power, Clocking, Coverage, Assertions)7. Version Control Systems (CVS, GIT, SVN)8. Logical Reasoning/Puzzles (Related to Digital Logic, General Reasoning, Lateral Thinking)9. Non Technical and Behavioral Questions (Most commonly asked)In addition to technical and behavioral part, this book touches upon a typical interview process and gives a glimpse of latest interview trends. It also lists some general tips and Best-Known-Methods to enable the readers follow correct preparation approach from day-1 of their preparations. Knowing what an Interviewer looks for in an interviewee is always an icing on the cake as it helps a person prepare accordingly. Hence, authors of this book spoke to few leaders in the semiconductor industry and asked their personal views on "What do they look for while Interviewing candidates and how do they usually arrive at a decision if a candidate should be hired?". These leaders have been working in the industry from many-many years now and they have interviewed lots of candidates over past several years. Hear directly from these leaders as to what they look for in candidates before hiring them. Enjoy reading this book. Authors are open to your feedback. Please do provide your valuable comments, ratings, and reviews.

Download or read book The CA3 Region of the Hippocampus How is it What is it for How does it do it written by Enrico Cherubini and published by Frontiers Media SA. This book was released on 2015-08-19 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CA3 hippocampal region receives information from the entorhinal cortex either directly from the perforant path or indirectly from the dentate gyrus via the mossy fibers (MFs). According to their specific targets (principal/mossy cells or interneurons), MFs terminate with large boutons or small filopodial extensions, respectively. MF-CA3 synapses are characterized by a low probability of release and pronounced frequency-dependent facilitation. In addition MF terminals are endowed with mGluRs that regulate their own release. We will describe the intrinsic membrane properties of pyramidal cells, which can sometimes fire in bursts, together with the geometry of their dendritic arborization. The single layer of pyramidal cells is quite distinct from the six-layered neocortical arrangement. The resulting aligned dendrites provides the substrate for laminated excitatory inputs. They also underlie a precise, diversity of inhibitory control which we will also describe in detail. The CA3 region has an especially rich internal connectivity, with recurrent excitatory and inhibitory loops. In recent years both in vivo and in vitro studies have allowed to better understand functional properties of the CA3 auto-associative network and its role in information processing. This circuit is implicated in encoding spatial representations and episodic memories. It generates physiological population synchronies, including gamma, theta and sharp-waves that are presumed to associate firing in selected assemblies of cells in different behavioral conditions. The CA3 region is susceptible to neurodegeneration during aging and after stresses such as infection or injury. Loss of some CA3 neurones has striking effects on mossy fiber inputs and can facilitate the generation of pathologic synchrony within the CA3 micro-circuit. The aim of this special topic is to bring together experts on the cellular and molecular mechanisms regulating the wiring properties of the CA3 hippocampal microcircuit in both physiological and pathological conditions, synaptic plasticity, behavior and cognition.We will particularly emphasize the dual glutamatergic and GABAergic phenotype of MF-CA3 synapses at early developmental stages and the steps that regulate the integration of newly generated neurons into the adult dentate gyrus-CA3 circuit.

Download or read book Digital and Analogue Instrumentation written by Nihal Kularatna and published by IET. This book was released on 2003 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: A substantial update of his earlier IEE book, Modern Electronic Test and Measuring Instruments, the author provides a state-of-the art review of modern families of digital instruments. For each family he covers internal design, use and applications, highlighting their advantages and limitations from a practical application viewpoint.The book also treats new digital instrument families such as DSOs, Arbitrary Function Generators, FFT analysers and many other common systems used by the test engineers, designers and research scientists.

Download or read book Handbook of Brewing written by Hans Michael Eßlinger and published by John Wiley & Sons. This book was released on 2009-04-22 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive reference combines the technological know-how from five centuries of industrial-scale brewing to meet the needs of a global economy. The editor and authors draw on the expertise gained in the world's most competitive beer market (Germany), where many of the current technologies were first introduced. Following a look at the history of beer brewing, the book goes on to discuss raw materials, fermentation, maturation and storage, filtration and stabilization, special production methods and beermix beverages. Further chapters investigate the properties and quality of beer, flavor stability, analysis and quality control, microbiology and certification, as well as physiology and toxicology. Such modern aspects as automation, energy and environmental protection are also considered. Regional processes and specialties are addressed throughout the entire book, making this a truly global resource on brewing.