Download or read book Proceedings of the 12th International Conference on Computer Engineering and Networks written by Qi Liu and published by Springer Nature. This book was released on 2022-10-19 with total page 1506 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference proceeding is a collection of the papers accepted by the CENet2022 – the 12th International Conference on Computer Engineering and Networks held on November 4-7, 2022 in Haikou, China. The topics focus but are not limited to Internet of Things and Smart Systems, Artificial Intelligence and Applications, Communication System Detection, Analysis and Application, and Medical Engineering and Information Systems. Each part can be used as an excellent reference by industry practitioners, university faculties, research fellows and undergraduates as well as graduate students who need to build a knowledge base of the most current advances and state-of-practice in the topics covered by this conference proceedings. This will enable them to produce, maintain, and manage systems with high levels of trustworthiness and complexity.

Download or read book 3D Stacked Chips written by Ibrahim (Abe) M. Elfadel and published by Springer. This book was released on 2016-05-11 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains for readers how 3D chip stacks promise to increase the level of on-chip integration, and to design new heterogeneous semiconductor devices that combine chips of different integration technologies (incl. sensors) in a single package of the smallest possible size. The authors focus on heterogeneous 3D integration, addressing some of the most important challenges in this emerging technology, including contactless, optics-based, and carbon-nanotube-based 3D integration, as well as signal-integrity and thermal management issues in copper-based 3D integration. Coverage also includes the 3D heterogeneous integration of power sources, photonic devices, and non-volatile memories based on new materials systems.

Download or read book Analysis and Simulation of Electrical and Computer Systems written by Damian Mazur and published by Springer. This book was released on 2017-10-20 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses selected topics in electrical engineering, electronics and mechatronics that have posed serious challenges for both the scientific and engineering communities in recent years. The topics covered range from mathematical models of electrical and electronic components and systems, to simulation tools implemented for their analysis and further developments; and from multidisciplinary optimization, signal processing methods and numerical results, to control and diagnostic techniques. By bridging theory and practice in the modeling, design and optimization of electrical, electromechanical and electronic systems, and by adopting a multidisciplinary perspective, the book provides researchers and practitioners with timely and extensive information on the state of the art in the field — and a source of new, exciting ideas for further developments and collaborations. The book presents selected results of the XIII Scientific Conference on Selected Issues of Electrical Engineering and Electronics (WZEE 2016), held on May 04–08, 2016, in Rzeszów, Poland. The Conference was organized by the Rzeszów Division of Polish Association of Theoretical and Applied Electrical Engineering (PTETiS) in cooperation with the Faculty of Electrical and Computer Engineering of the Rzeszów University of Technology.

Download or read book Information Systems Architecture and Technology Proceedings of 39th International Conference on Information Systems Architecture and Technology ISAT 2018 written by Jerzy Świątek and published by Springer. This book was released on 2018-08-27 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume set of books highlights major advances in the development of concepts and techniques in the area of new technologies and architectures of contemporary information systems. Further, it helps readers solve specific research and analytical problems and glean useful knowledge and business value from the data. Each chapter provides an analysis of a specific technical problem, followed by a numerical analysis, simulation and implementation of the solution to the real-life problem. Managing an organisation, especially in today’s rapidly changing circumstances, is a very complex process. Increased competition in the marketplace, especially as a result of the massive and successful entry of foreign businesses into domestic markets, changes in consumer behaviour, and broader access to new technologies and information, calls for organisational restructuring and the introduction and modification of management methods using the latest advances in science. This situation has prompted many decision-making bodies to introduce computer modelling of organisation management systems. The three books present the peer-reviewed proceedings of the 39th International Conference “Information Systems Architecture and Technology” (ISAT), held on September 16–18, 2018 in Nysa, Poland. The conference was organised by the Computer Science and Management Systems Departments, Faculty of Computer Science and Management, Wroclaw University of Technology and Sciences and University of Applied Sciences in Nysa, Poland. The papers have been grouped into three major parts: Part I—discusses topics including but not limited to Artificial Intelligence Methods, Knowledge Discovery and Data Mining, Big Data, Knowledge Based Management, Internet of Things, Cloud Computing and High Performance Computing, Distributed Computer Systems, Content Delivery Networks, and Service Oriented Computing. Part II—addresses topics including but not limited to System Modelling for Control, Recognition and Decision Support, Mathematical Modelling in Computer System Design, Service Oriented Systems and Cloud Computing, and Complex Process Modelling. Part III—focuses on topics including but not limited to Knowledge Based Management, Modelling of Financial and Investment Decisions, Modelling of Managerial Decisions, Production Systems Management and Maintenance, Risk Management, Small Business Management, and Theories and Models of Innovation.

Download or read book VLSI Design and Test written by Anirban Sengupta and published by Springer. This book was released on 2019-08-17 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 23st International Symposium on VLSI Design and Test, VDAT 2019, held in Indore, India, in July 2019. The 63 full papers were carefully reviewed and selected from 199 submissions. The papers are organized in topical sections named: analog and mixed signal design; computing architecture and security; hardware design and optimization; low power VLSI and memory design; device modelling; and hardware implementation.

Download or read book Parasitic Substrate Coupling in High Voltage Integrated Circuits written by Pietro Buccella and published by Springer. This book was released on 2018-03-14 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a new approach to model and predict substrate parasitic failures in integrated circuits with standard circuit design tools. The injection of majority and minority carriers in the substrate is a recurring problem in smart power ICs containing high voltage, high current switching devices besides sensitive control, protection and signal processing circuits. The injection of parasitic charges leads to the activation of substrate bipolar transistors. This book explores how these events can be evaluated for a wide range of circuit topologies. To this purpose, new generalized devices implemented in Verilog-A are used to model the substrate with standard circuit simulators. This approach was able to predict for the first time the activation of a latch-up in real circuits through post-layout SPICE simulation analysis. Discusses substrate modeling and circuit-level simulation of parasitic bipolar device coupling effects in integrated circuits; Includes circuit back-annotation of the parasitic lateral n-p-n and vertical p-n-p bipolar transistors in the substrate; Uses Spice for simulation and characterization of parasitic bipolar transistors, latch-up of the parasitic p-n-p-n structure, and electrostatic discharge (ESD) protection devices; Offers design guidelines to reduce couplings by adding specific protections.

Download or read book Information Technology in Biomedicine written by Ewa Pietka and published by Springer Nature. This book was released on 2020-09-02 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid and continuous growth in the amount of available medical information and the variety of multimodal content has created demand for a fast and reliable technology capable of processing data and delivering results in a user-friendly manner, whenever and wherever the information is needed. Multimodal acquisition systems, AI-powered applications, and biocybernetic support for medical procedures, physiotherapy and prevention have opened up exciting new avenues in terms of optimizing the healthcare system for the benefit of patients. This book presents a comprehensive study on the latest advances in medical data science and gathers carefully selected articles written by respected experts on information technology. Pursuing an interdisciplinary approach and addressing both theoretical and applied aspects, it chiefly focuses on: Artificial Intelligence Image Analysis Sound and Motion in Physiotherapy and Physioprevention Modeling and Simulation Medical Data Analysis Given its scope, the book offers a valuable reference tool for all scientists who deal with problems of designing and implementing information processing tools employed in systems that assist in patient diagnosis and treatment, as well as students who want to learn more about the latest innovations in quantitative medical data analysis, data mining, and artificial intelligence.

Download or read book Design of Low Power and Low Area Passive Sigma Delta Modulators for Audio Applications written by David Fouto and published by Springer. This book was released on 2017-05-28 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the study, design, modulation, optimization and implementation of low power, passive DT-ΣΔMs for use in audio applications. The high gain and bandwidth amplifier normally used for integration in ΣΔ modulation, is replaced by passive, switched-capacitor branches working under the Ultra Incomplete Settling (UIS) condition, leading to a reduction of the consumed power. The authors describe a design process that uses high level models and an optimization process based in genetic algorithms to achieve the desired performance.

Download or read book Wideband CMOS Receivers written by Miguel D. Fernandes and published by Springer. This book was released on 2015-07-10 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates how to design a wideband receiver operating in current mode, in which the noise and non-linearity are reduced, implemented in a low cost single chip, using standard CMOS technology. The authors present a solution to remove the transimpedance amplifier (TIA) block and connect directly the mixer’s output to a passive second-order continuous-time Σ∆ analog to digital converter (ADC), which operates in current-mode. These techniques enable the reduction of area, power consumption, and cost in modern CMOS receivers.

Download or read book Inverter Based Circuit Design Techniques for Low Supply Voltages written by Rakesh Kumar Palani and published by Springer. This book was released on 2016-10-14 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes intuitive analog design approaches using digital inverters, providing filter architectures and circuit techniques enabling high performance analog circuit design. The authors provide process, supply voltage and temperature (PVT) variation-tolerant design techniques for inverter based circuits. They also discuss various analog design techniques for lower technology nodes and lower power supply, which can be used for designing high performance systems-on-chip.

Download or read book Computational Statistics and Mathematical Modeling Methods in Intelligent Systems written by Radek Silhavy and published by Springer Nature. This book was released on 2019-09-19 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents real-world problems and exploratory research in computational statistics, mathematical modeling, artificial intelligence and software engineering in the context of the intelligent systems. This book constitutes the refereed proceedings of the 3rd Computational Methods in Systems and Software 2019 (CoMeSySo 2019), a groundbreaking online conference that provides an international forum for discussing the latest high-quality research results.

Download or read book Algorithms and Architectures for Parallel Processing written by Meikang Qiu and published by Springer Nature. This book was released on 2020-09-29 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume set LNCS 12452, 12453, and 12454 constitutes the proceedings of the 20th International Conference on Algorithms and Architectures for Parallel Processing, ICA3PP 2020, in New York City, NY, USA, in October 2020. The total of 142 full papers and 5 short papers included in this proceedings volumes was carefully reviewed and selected from 495 submissions. ICA3PP is covering the many dimensions of parallel algorithms and architectures, encompassing fundamental theoretical approaches, practical experimental projects, and commercial components and systems. As applications of computing systems have permeated in every aspects of daily life, the power of computing system has become increasingly critical. This conference provides a forum for academics and practitioners from countries around the world to exchange ideas for improving the efficiency, performance, reliability, security and interoperability of computing systems and applications. ICA3PP 2020 focus on two broad areas of parallel and distributed computing, i.e. architectures, algorithms and networks, and systems and applications.

Download or read book Information Security and Cryptology ICISC 2020 written by Deukjo Hong and published by Springer Nature. This book was released on 2021-02-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes selected papers from the 23rd International Conference on Information Security and Cryptology, ICISC 2020, held in Seoul, South Korea, in December 2020. Due to the COVID-19, the confere was held online. The total of 15 papers presented in this volume were carefully reviewed and selected from 51 submissions. The aim of this conference was to provide an international forum for the latest results of research, development, and applications within the field of information security and cryptology.

Download or read book Design of Reconfigurable Logic Controllers written by Andrei Karatkevich and published by Springer. This book was released on 2015-12-23 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the original concepts and modern techniques for specification, synthesis, optimisation and implementation of parallel logical control devices. It deals with essential problems of reconfigurable control systems like dependability, modularity and portability. Reconfigurable systems require a wider variety of design and verification options than the application-specific integrated circuits. The book presents a comprehensive selection of possible design techniques. The diversity of the modelling approaches covers Petri nets, state machines and activity diagrams. The preferences of the presented optimization and synthesis methods are not limited to increasing of the efficiency of resource use. One of the biggest advantages of the presented methods is the platform independence, the FPGA devices and single board computers are some of the examples of possible platforms. These issues and problems are illustrated with practical cases of complete control systems. If you expect a new look at the reconfigurable systems designing process or need ideas for improving the quality of the project, this book is a good choice.g process or need ideas for improving the quality of the project, this book is a good choice.

Download or read book Enabling Technologies for Very Large Scale Synaptic Electronics written by Themis Prodromakis and published by Frontiers Media SA. This book was released on 2018-07-05 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: An important part of the colossal effort associated with the understanding of the brain involves using electronics hardware technology in order to reproduce biological behavior in ‘silico’. The idea revolves around leveraging decades of experience in the electronics industry as well as new biological findings that are employed towards reproducing key behaviors of fundamental elements of the brain (notably neurons and synapses) at far greater speed-scale products than any software-only implementation can achieve for the given level of modelling detail. So far, the field of neuromorphic engineering has proven itself as a major source of innovation towards the ‘silicon brain’ goal, with the methods employed by its community largely focused on circuit design (analogue, digital and mixed signal) and standard, commercial, Complementary Metal-Oxide Silicon (CMOS) technology as the preferred `tools of choice’ when trying to simulate or emulate biological behavior. However, alongside the circuit-oriented sector of the community there exists another community developing new electronic technologies with the express aim of creating advanced devices, beyond the capabilities of CMOS, that can intrinsically simulate neuron- or synapse-like behavior. A notable example concerns nanoelectronic devices responding to well-defined input signals by suitably changing their internal state (‘weight’), thereby exhibiting `synapse-like’ plasticity. This is in stark contrast to circuit-oriented approaches where the `synaptic weight’ variable has to be first stored, typically as charge on a capacitor or digitally, and then appropriately changed via complicated circuitry. The shift of very much complexity from circuitry to devices could potentially be a major enabling factor for very-large scale `synaptic electronics’, particularly if the new devices can be operated at much lower power budgets than their corresponding 'traditional' circuit replacements. To bring this promise to fruition, synergy between the well-established practices of the circuit-oriented approach and the vastness of possibilities opened by the advent of novel nanoelectronic devices with rich internal dynamics is absolutely essential and will create the opportunity for radical innovation in both fields. The result of such synergy can be of potentially staggering impact to the progress of our efforts to both simulate the brain and ultimately understand it. In this Research Topic, we wish to provide an overview of what constitutes state-of-the-art in terms of enabling technologies for very large scale synaptic electronics, with particular stress on innovative nanoelectronic devices and circuit/system design techniques that can facilitate the development of very large scale brain-inspired electronic systems

Download or read book Computer Vision and Graphics written by Leszek J. Chmielewski and published by Springer. This book was released on 2014-09-02 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the International Conference on Computer Vision and Graphics, ICCVG 2014, held in Warsaw, Poland, in September 2014. The 81 full papers presented were carefully reviewed and selected from various submissions. They cover various important aspects of computer vision and graphics.

Download or read book Cloud Security written by Brij B. Gupta and published by CRC Press. This book was released on 2021-05-25 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cloud computing is an indispensable part of the modern Information and Communication Technology (ICT) systems. Cloud computing services have proven to be of significant importance, and promote quickly deployable and scalable IT solutions with reduced infrastructure costs. However, utilization of cloud also raises concerns such as security, privacy, latency, and governance, that keep it from turning into the predominant option for critical frameworks. As such, there is an urgent need to identify these concerns and to address them. Cloud Security: Concepts, Applications and Perspectives is a comprehensive work with substantial technical details for introducing the state-of-the-art research and development on various approaches for security and privacy of cloud services; novel attacks on cloud services; cloud forensics; novel defenses for cloud service attacks; and cloud security analysis. It discusses the present techniques and methodologies, and provides a wide range of examples and illustrations to effectively show the concepts, applications, and perspectives of security in cloud computing. This highly informative book will prepare readers to exercise better protection by understanding the motivation of attackers and to deal with them to mitigate the situation. In addition, it covers future research directions in the domain. This book is suitable for professionals in the field, researchers, students who are want to carry out research in the field of computer and cloud security, faculty members across universities, and software developers engaged in software development in the field.