Download or read book Biopolymers Miscellaneous Biopolymers and Biodegradation of Synthetic Polymers written by A. Steinbüchel and published by Wiley-Blackwell. This book was released on 2001 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first part of this volume focuses on biosynthesis, metabolism, biodegradation, functions, properties and applications of miscellaneous polymers, such as hemozoin, thymine-containing styrene polymers, polythioesters, polyphosphate, polyhydroxymethionine, polyketides, and natural polyacetals. The second part then goes on to treat the biodegradation of a wide range of synthetic polymers, e.g. substituted cellulose nylon polycarbonate polyvinyl alcohol polyurethanes polystyrenes polyethylene polyanhydrides

Download or read book Biopolymers Reuse Recycling and Disposal written by Michael Niaounakis and published by William Andrew. This book was released on 2013-06-20 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopolymers Reuse, Recycling and Disposal is the first book covering all aspects of biopolymer waste management and post-usage scenarios, embracing existing technologies, applications, and the behavior of biopolymers in various waste streams. The book investigates the benefits and weaknesses, social, economic and environmental impacts, and regulatory aspects of each technology. It covers different types of recycling and degradation, as well as life cycle analysis, all supported by case studies, literature references, and detailed information about global patents. Patents in particular—comprising 80% of published technical literature in this emerging field, widely scattered, and often available in Japanese only—are a key source of information. Dr. Niaounakis draws on disciplines such as polymer science, management, biology and microbiology, organic chemistry, environmental chemistry, and patent law to produce a reference guide for engineers, scientists and other professionals involved in the development and production of biopolymers, waste management, and recycling. This information is also valuable for regulators, patent attorneys and academics working in this field. - Explores techniques and technologies involved in managing biopolymers in the waste stream, including recycling and upcycling - Provides waste management and recycling professionals the knowledge they need to plan for the exponential growth in biopolymer waste - Helps engineers and product designers fully consider the end-of-life aspects of their environmentally sustainable 'green' products and solutions

Download or read book Carraher s Polymer Chemistry Eighth Edition written by Charles E. Carraher Jr. and published by CRC Press. This book was released on 2010-10-13 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated to reflect a growing focus on green chemistry in the scientific community and in compliance with the American Chemical Society’s Committee on Professional Training guidelines, Carraher’s Polymer Chemistry, Eighth Edition integrates the core areas that contribute to the growth of polymer science. It supplies the basic understanding of polymers essential to the training of science, biomedical, and engineering students. New in the Eighth Edition: Updating of analytical, physical, and special characterization techniques Increased emphasis on carbon nanotubes, tapes and glues, butyl rubber, polystyrene, polypropylene, polyethylene, poly(ethylene glycols), shear-thickening fluids, photo-chemistry and photophysics, dental materials, and aramids New sections on copolymers, including fluoroelastomers, nitrile rubbers, acrylonitrile-butadiene-styrene terpolymers, and EPDM rubber New units on spliceosomes, asphalt, and fly ash and aluminosilicates Larger focus on the molecular behavior of materials, including nano-scale behavior, nanotechnology, and nanomaterials Continuing to provide a user-friendly approach to the world of polymeric materials, the book allows students to integrate their chemical knowledge and establish a connection between fundamental and applied chemical information. It contains all of the elements of an introductory text with synthesis, property, application, and characterization. Special sections in each chapter contain definitions, learning objectives, questions, and additional reading, with case studies woven into the text fabric. Symbols, trade names, websites, and other useful ancillaries appear in the appendices to supplement the text.

Download or read book Carraher s Polymer Chemistry written by Charles E. Carraher Jr. and published by CRC Press. This book was released on 2017-10-12 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carraher's Polymer Chemistry, Tenth Edition integrates the core areas of polymer science. Along with updating of each chapter, newly added content reflects the growing applications in Biochemistry, Biomaterials, and Sustainable Industries. Providing a user-friendly approach to the world of polymeric materials, the book allows students to integrate their chemical knowledge and establish a connection between fundamental and applied chemical information. It contains all of the elements of an introductory text with synthesis, property, application, and characterization. Special sections in each chapter contain definitions, learning objectives, questions, case studies and additional reading.

Download or read book Introduction to Polymer Chemistry Third Edition written by Charles E. Carraher Jr. and published by CRC Press. This book was released on 2012-12-04 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuing the tradition of its previous editions, the third edition of Introduction to Polymer Chemistry provides a well-rounded presentation of the principles and applications of natural, synthetic, inorganic, and organic polymers. With an emphasis on the environment and green chemistry and materials, this third edition offers detailed coverage of natural and synthetic giant molecules, inorganic and organic polymers, biomacromolecules, elastomers, adhesives, coatings, fibers, plastics, blends, caulks, composites, and ceramics. Using simple fundamentals, the book demonstrates how the basic principles of one polymer group can be applied to all of the other groups. It covers reactivities, synthesis and polymerization reactions, techniques for characterization and analysis, energy absorption and thermal conductivity, physical and optical properties, and practical applications. This edition addresses environmental concerns and green polymeric materials, including biodegradable polymers and microorganisms for synthesizing materials. Case studies woven within the text illustrate various developments and the societal and scientific contexts in which these changes occurred. Now including new material on environmental science, Introduction to Polymer Chemistry, Third Edition remains the premier book for understanding the behavior of polymers. Building on undergraduate work in foundational courses, the text fulfills the American Chemical Society Committee on Professional Training (ACS CPT) in-depth course requirement.

Download or read book Introduction to Polymer Chemistry written by Charles E. Carraher Jr. and published by CRC Press. This book was released on 2012-12-17 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuing the tradition of its previous editions, the third edition of Introduction to Polymer Chemistry provides a well-rounded presentation of the principles and applications of natural, synthetic, inorganic, and organic polymers. With an emphasis on the environment and green chemistry and materials, this third edition offers detailed coverage of natural and synthetic giant molecules, inorganic and organic polymers, biomacromolecules, elastomers, adhesives, coatings, fibers, plastics, blends, caulks, composites, and ceramics. Using simple fundamentals, the book demonstrates how the basic principles of one polymer group can be applied to all of the other groups. It covers reactivities, synthesis and polymerization reactions, techniques for characterization and analysis, energy absorption and thermal conductivity, physical and optical properties, and practical applications. This edition addresses environmental concerns and green polymeric materials, including biodegradable polymers and microorganisms for synthesizing materials. Case studies woven within the text illustrate various developments and the societal and scientific contexts in which these changes occurred. Now including new material on environmental science, Introduction to Polymer Chemistry, Third Edition remains the premier book for understanding the behavior of polymers. Building on undergraduate work in foundational courses, the text fulfills the American Chemical Society Committee on Professional Training (ACS CPT) in-depth course requirement.

Download or read book Introduction to Polymer Chemistry Fourth Edition written by Charles E. Carraher Jr. and published by CRC Press. This book was released on 2017-01-06 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Polymer Chemistry provides undergraduate students with a much-needed, well-rounded presentation of the principles and applications of natural, synthetic, inorganic, and organic polymers. With an emphasis on the environment and green chemistry and materials, this fourth edition continues to provide detailed coverage of natural and synthetic giant molecules, inorganic and organic polymers, elastomers, adhesives, coatings, fibers, plastics, blends, caulks, composites, and ceramics. Building on undergraduate work in foundational courses, the text fulfills the American Chemical Society Committee on Professional Training (ACS CPT) in-depth course requirement

Download or read book Introduction to Polymer Chemistry Second Edition written by Charles E. Carraher Jr. and published by CRC Press. This book was released on 2011-07-08 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the first polymer book to receive the CHOICE Outstanding Academic Title distinction (2007), Introduction to Polymer Chemistry provided undergraduate students with a much-needed, well-rounded presentation of the principles and applications of natural, synthetic, inorganic, and organic polymers. With an emphasis on the environment and green chemistry and materials, this second edition continues that tradition, offering detailed coverage of natural and synthetic giant molecules, inorganic and organic polymers, elastomers, adhesives, coatings, fibers, plastics, blends, caulks, composites, and ceramics. Using simple fundamentals, the author shows how the basic principles of one polymer group can be applied to all of the other groups. He covers synthesis and polymerization reactions, reactivities, techniques for characterization and analysis, energy absorption and thermal conductivity, physical and optical properties, and practical applications. This edition also addresses environmental concerns and green polymeric materials, including biodegradable polymers and microorganisms for synthesizing materials. Brief case studies are woven within the text as historical accounts to illustrate various developments and the societal and scientific contexts in which these changes occurred. Introduction to Polymer Chemistry, Second Edition remains the premier text for understanding the behavior of polymers while offering new material on environmental science. Building on undergraduate work in foundational courses, the text fulfills the American Chemical Society Committee on Professional Training (ACS CPT) in-depth course requirement. It also provides a test bank with upon qualifying course adoption.

Download or read book Plastics and the Environment written by Anthony L. Andrady and published by John Wiley & Sons. This book was released on 2003-02-20 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics offer a variety of environmental benefits. However, their production, applications, and disposal present many environmental concerns. Plastics and the Environment provides state-of-the-art technical and research information on the complex relationship between the plastic and polymer industry and the environment, focusing on the sustainability, environmental impact, and cost—benefit tradeoffs associated with different technologies. Bringing together the field’s leading researchers, Anthony Andrady’s innovative collection not only covers how plastics affect the environment, but also how environmental factors affect plastics. The relative benefits of recycling, resource recovery, and energy recovery are also discussed in detail. The first of the book’s four sections represents a basic introduction to the key subject matter of plastics and the environment; the second explores several pertinent applications of plastics with environmental implications–packaging, paints and coatings, textiles, and agricultural film use. The third section discusses the behavior of plastics in some of the environments in which they are typically used, such as the outdoors, in biotic environments, or in fires. The final section consists of chapters on recycling and thermal treatment of plastics waste. Chapters include: Commodity Polymers Plastics in Transportation Biodegradation of Common Polymers Thermal Treatment of Polymer Waste Incineration of Plastics The contributors also focus on the effectiveness of recent technologies in mitigating environmental impacts, particularly those for managing plastics in the solid waste stream. Plastic and design engineers, polymer chemists, material scientists, and ecologists will find Plastics and the Environment to be a vital resource to this critical industry.

Download or read book Carraher s Polymer Chemistry Ninth Edition written by Charles E. Carraher Jr. and published by CRC Press. This book was released on 2016-04-19 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most of the advancements in communication, computers, medicine, and air and water purity are linked to macromolecules and a fundamental understanding of the principles that govern their behavior. These fundamentals are explored in Carraher's Polymer Chemistry, Ninth Edition. Continuing the tradition of previous volumes, the latest edition provides a well-rounded presentation of the principles and applications of polymers. With an emphasis on the environment and green chemistry and materials, this edition offers detailed coverage of natural and synthetic giant molecules, inorganic and organic polymers, biomacromolecules, elastomers, adhesives, coatings, fibers, plastics, blends, caulks, composites, and ceramics. Using simple fundamentals, this book demonstrates how the basic principles of one polymer group can be applied to all of the other groups. It covers reactivities, synthesis and polymerization reactions, techniques for characterization and analysis, energy absorption and thermal conductivity, physical and optical properties, and practical applications. This edition includes updated techniques, new sections on a number of copolymers, expanded emphasis on nanotechnology and nanomaterials, and increased coverage of topics including carbon nanotubes, tapes and glues, photochemistry, and more. With topics presented so students can understand polymer science even if certain parts of the text are skipped, this book is suitable as an undergraduate as well as an introductory graduate-level text. The author begins most chapters with theory followed by application, and generally addresses the most critical topics first. He provides all of the elements of an introductory text, covering synthesis, properties, applications, and characterization. This user-friendly book also contains definitions, learning objectives, questions, and additional reading in each chapter.

Download or read book Introduction to Nanoscience written by Gabor L. Hornyak and published by CRC Press. This book was released on 2008-05-15 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tomorrow's nanoscientist will have a truly interdisciplinary and nano-centric education, rather than, for example, a degree in chemistry with a specialization in nanoscience. For this to happen, the field needs a truly focused and dedicated textbook. This full-color masterwork is such a textbook. It introduces the nanoscale along with the societal

Download or read book Silicon Based Polymers and Materials written by Jerzy J. Chruściel and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-03-07 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon based materials and polymers are made of silicon containing polymers, mainly macromolecular siloxanes (silicones). This book covers the different kinds of siliconbased polymers: silicones, silsesquioxanes (POSS), and silicon-based copolymers. Other silicon containig polymers: polycarbosilanes, polysilazanes, siloxane-organic copolymers, silicon derived high-tech ceramics: silicon carbide and oxycarbide, silicon nitride, etc. have also a very important practical meaning and a hudge number of practical applications. These materials make up products in a variety of industries and products, including technical and medical applicatons. Polycrystalline silicon is the basic material for large scale photovoltaic (PV) applications as solar cells. Technical applications of crystalline (c-Si) and amorphous (a-Si) silicon (fully inorganic materials), silicon nanowires are still quickly growing, especially in the fi eld of microelectronics, optoelectronics, photonics. and photovoltaics, catalysts, and different electronic devices (e.g. sensors, thermoelectric devices). This book is ideal for researchers and as such covers the industrial perspective of using each class of silicon based materials. Discusses silanes, silane coupling agents (SCA), silica, silicates, silane modified fillers, silsesquioxanes, silicones, and other silicon polymers and copolymers for practical applications as polymeric materials and very useful ingredients in materials science.

Download or read book Handbook of Biodegradable Polymers written by Catia Bastioli and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-03-09 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook covers characteristics, processability and application areas of biodegradable polymers, with key polymer family groups discussed. It explores the role of biodegradable polymers in different waste management practices including anaerobic digestion, and considers topics such as the different types of biorefineries for renewable monomers used in producing the building blocks for biodegradable polymers.

Download or read book Introduction to Nanoscience and Nanotechnology written by Gabor L. Hornyak and published by CRC Press. This book was released on 2008-12-22 with total page 1791 pages. Available in PDF, EPUB and Kindle. Book excerpt: The maturation of nanotechnology has revealed it to be a unique and distinct discipline rather than a specialization within a larger field. Its textbook cannot afford to be a chemistry, physics, or engineering text focused on nano. It must be an integrated, multidisciplinary, and specifically nano textbook. The archetype of the modern nano textbook

Download or read book Powders and Fibers written by Michel Nardin and published by CRC Press. This book was released on 2006-12-21 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: New analytical methods have provided further insight into the structure, surface characteristics, and chemistries of increasingly small particles. However, current literature offers information on only a limited number of powders being investigated. Written by renowned scientists in the field, Powders and Fibers: Interfacial Science and Application

Download or read book Biodegradable Polymers for Industrial Applications written by Robin Smith and published by Elsevier. This book was released on 2005-05-06 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vast majority of plastic products are made from petroleum-based synthetic polymers that do not degrade in a landfill or in a compost-like environment. Therefore, the disposal of these products poses a serious environmental problem. An environmentally-conscious alternative is to design/synthesize polymers that are biodegradable.Biodegradable polymers for industrial applications introduces the subject by outlining the classification and development of biodegradable polymers. Materials available for the production of biodegradable polymers are explored. Polymers derived from sugars, natural fibres, renewable forest resources, poly(lactic acid) and protein-nanoparticle composites are looked at in detail in this section. The properties and mechanisms of degradation are looked at, prefacing the subject with a chapter on current standards. The final part explores opportunities for industrial applications, with chapters on packing, agriculture and biodegradable polycaprolactone foams in supercritical carbon dioxide.Biodegradable polymers for industrial applications explores the fundamental concepts concerning the development of biodegradable polymers, degradable polymers from sustainable sources, degradation and properties and industrial applications. It is an authoritative book that is invaluable for academics, researchers and policy makers in the industry. - Reviews the importance and industrial use of biodegradable polymers and degradable polymers from sustainable sources - An invaluable resource for both academics and industry - Edited by a leading authority in the field with contributions from a worldwide team of experts

Download or read book Tissue Engineering written by John P. Fisher and published by CRC Press. This book was released on 2012-12-11 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tissue engineering research continues to captivate the interest of researchers and the general public alike. Popular media outlets like The New York Times, Time, and Wired continue to engage a wide audience and foster excitement for the field as regenerative medicine inches toward becoming a clinical reality. Putting the numerous advances in the field into a broad context, Tissue Engineering: Principles and Practices explores current thoughts on the development of engineered tissues. With contributions from experts and pioneers, this book begins with coverage of the fundamentals, details the supporting technology, and then elucidates their applications in tissue engineering. It explores strategic directions, nanobiomaterials, biomimetics, gene therapy, cell engineering, and more. The chapters then explore the applications of these technologies in areas such as bone engineering, cartilage tissue, dental tissue, vascular engineering, and neural engineering. A comprehensive overview of major research topics in tissue engineering, the book: Examines the properties of stem cells, primary cells, growth factors, and extracellular matrix as well as their impact on the development of tissue-engineered devices Focuses upon those strategies typically incorporated into tissue-engineered devices or utilized in their development, including scaffolds, nanocomposites, bioreactors, drug delivery systems, and gene therapy techniques Presents synthetic tissues and organs that are currently under development for regenerative medicine applications The contributing authors are a diverse group with backgrounds in academia, clinical medicine, and industry. Furthermore, this book includes contributions from Europe, Asia, and North America, helping to broaden the views on the development and application of tissue-engineered devices. The book provides a useful reference for courses devoted to tissue engineering fundamentals and those laboratories developing tissue-engineered devices for regenerative medicine therapy.