Download or read book Millimeter Wave mmWave Communications written by Manuel García Sanchez and published by MDPI. This book was released on 2020-03-25 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: The millimeter-wave frequency band (30–300 GHz) is considered a potential candidate to host very high data rate communications. First used for high capacity radio links and then for broadband indoor wireless networks, the interest in this frequency band has increased as it is proposed to accommodate future 5G mobile communication systems. The large bandwidth available will enable a number of new uses for 5G. In addition, due to the large propagation attenuation, this frequency band may provide some additional advantages regarding frequency reuse and communication security. However, a number of issues have to be addressed to make mm-wave communications viable. This book collects a number of contributions that present solutions to these challenges.
Download or read book Millimeter Wave Wireless Communications written by Theodore S. Rappaport and published by Pearson Education. This book was released on 2015 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Definitive, Comprehensive Guide to Cutting-Edge Millimeter Wave Wireless Design “This is a great book on mmWave systems that covers many aspects of the technology targeted for beginners all the way to the advanced users. The authors are some of the most credible scholars I know of who are well respected by the industry. I highly recommend studying this book in detail.” —Ali Sadri, Ph.D., Sr. Director, Intel Corporation, MCG mmWave Standards and Advanced Technologies Millimeter wave (mmWave) is today's breakthrough frontier for emerging wireless mobile cellular networks, wireless local area networks, personal area networks, and vehicular communications. In the near future, mmWave products, systems, theories, and devices will come together to deliver mobile data rates thousands of times faster than today's existing cellular and WiFi networks. In Millimeter Wave Wireless Communications, four of the field's pioneers draw on their immense experience as researchers, entrepreneurs, inventors, and consultants, empowering engineers at all levels to succeed with mmWave. They deliver exceptionally clear and useful guidance for newcomers, as well as the first complete desk reference for design experts. The authors explain mmWave signal propagation, mmWave circuit design, antenna designs, communication theory, and current standards (including IEEE 802.15.3c, Wireless HD, and ECMA/WiMedia). They cover comprehensive mmWave wireless design issues, for 60 GHz and other mmWave bands, from channel to antenna to receiver, introducing emerging design techniques that will be invaluable for research engineers in both industry and academia. Topics include Fundamentals: communication theory, channel propagation, circuits, antennas, architectures, capabilities, and applications Digital communication: baseband signal/channel models, modulation, equalization, error control coding, multiple input multiple output (MIMO) principles, and hardware architectures Radio wave propagation characteristics: indoor and outdoor applications Antennas/antenna arrays, including on-chip and in-package antennas, fabrication, and packaging Analog circuit design: mmWave transistors, fabrication, and transceiver design approaches Baseband circuit design: multi–gigabit-per-second, high-fidelity DAC and ADC converters Physical layer: algorithmic choices, design considerations, and impairment solutions; and how to overcome clipping, quantization, and nonlinearity Higher-layer design: beam adaptation protocols, relaying, multimedia transmission, and multiband considerations 60 GHz standardization: IEEE 802.15.3c for WPAN, Wireless HD, ECMA-387, IEEE 802.11ad, Wireless Gigabit Alliance (WiGig)
Download or read book Millimeter Wave Waveguides written by Dmitri Lioubtchenko and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: Millimeter-Wave Waveguides is a monograph devoted to open waveguides for millimeter wave applications. In the first chapters, general waveguide theory is presented (with the emphasis on millimeter wave applications). Next, the book systematically describes the results of both theoretical and experimental studies of rectangular dielectric rod waveguides with high dielectric permittivities. Simple and accurate methods for propagation constant calculations for isotropic as well as anisotropic dielectric waveguides are described. Both analytical and numerical approaches are covered. Different types of transitions have been simulated in order to find optimal configurations as well as optimal dimensions of dielectric waveguides for the frequency band of 75-110 GHz. Simple and effective design is presented. The experimental studies of dielectric waveguides show that Sapphire waveguide can be utilized for this frequency band as a very low-loss waveguide. Design of antennas with low return loss based on dielectric waveguides is also described.
Download or read book Infrared and Millimeter Waves written by Kenneth Button and published by Elsevier. This book was released on 2012-12-02 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared and Millimeter Waves, Volume 1: Sources of Radiation explores modern sources of radiation available for use in the far-infrared and near-millimeter wavelength range of the spectrum. This book describes the operating principles and comparative performances of all three types of device: electron tubes, solid state devices, and optically pumped lasers. This volume is comprised of seven chapters; the first of which reviews the developments in the design and construction of high-power, high-efficiency millimeter sources and in the nonlinear theory for cyclotron masers. The second chapter deals with IMPATT devices for millimeter-wave power generation, with emphasis on device physics design considerations as well as cw and pulsed operations of IMPATT oscillators and amplifiers at millimeter frequencies. The chapters that follow focus on optically pumped lasers, backward wave oscillators, the Ledatron, and infrared and submillimeter-wave waveguides. This book concludes with a discussion on free electron lasers based on stimulated scattering from relativistic electron beams. An original reformulation of stimulated scattering theory that attempts to encompass all previous treatments is described and compared with available experimental data. This text also presents a semi-qualitative analysis of nonlinear saturation. This book will appeal to scientists and professional engineers.
Download or read book Millimeter Wave Circuits for 5G and Radar written by Gernot Hueber and published by Cambridge University Press. This book was released on 2019-06-20 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the concepts, architectures, components, tools, and techniques needed to design millimeter-wave circuits for current and emerging wireless system applications. Focusing on applications in 5G, connectivity, radar, and more, leading experts in radio frequency integrated circuit (RFIC) design provide a comprehensive treatment of cutting-edge physical-layer technologies for radio frequency (RF) transceivers - specifically RF, analog, mixed-signal, and digital circuits and architectures. The full design chain is covered, from system design requirements through to building blocks, transceivers, and process technology. Gain insight into the key novelties of 5G through authoritative chapters on massive MIMO and phased arrays, and learn about the very latest technology developments, such as FinFET logic process technology for RF and millimeter-wave applications. This is an essential reading and an excellent reference for high-frequency circuit designers in both academia and industry.
Download or read book Infrared and Millimeter Waves V4 written by Kenneth J. Button and published by Elsevier. This book was released on 2014-04-08 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared and Millimeter Waves is a series of books that compiles the work of several authors, with each volume focusing on certain aspects of infrared and millimeter waves, such as sources of radiation, instrumentation, and millimeter systems. This book concerns itself with millimeter systems. Comprised of seven chapters, this book discusses several systems that involve the use of millimeter waves, such as radars and missile guidance systems. The first chapter provides a comprehensive overview of millimeter waves, while the succeeding chapter discusses several technologies that involve millimeter systems, such as radar, missile guidance, and imaging systems. This book will be of great use to researchers and professionals whose work involves infrared and millimeter waves.
Download or read book Handbook of RF Microwave and Millimeter wave Components written by Leonid A. Belov and published by Artech House. This book was released on 2012 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique and comprehensive resource offers you a detailed treatment of the operations principles, key parameters, and specific characteristics of active and passive RF, microwave, and millimeter-wave components. The book covers both linear and nonlinear components that are used in a wide range of application areas, from communications and information sciences, to avionics, space, and military engineering. This practical book presents descriptions and clear examples and of the best materials and products used in the field, including laminates, prepregs, substrates; microstrip, coaxial and waveguide transmission lines; fixed and rotating connectors; matching and adjusting elements; frequency filters; phase shifters; and ferrite gates and circulators. Moreover, the book offers you in-depth discussions on microwave switches and matrices, including MEMS technology, solid state and vacuum amplifiers, mixers, modulators and demodulators, and oscillation sources. You also find coverage of the stable frequency synthesizer structure and sources of modulated or noisy signals. Greatly adding to the usefulness of this volume is the inclusion of more than 700 Internet addresses of manufacturers from across the globe.
Download or read book Infrared and Millimeter Waves V11 written by Kenneth J. Button and published by Elsevier. This book was released on 1984-12-28 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared and Millimeter Waves, Volume 11: Millimeter Components and Techniques, Part III compiles the work of several authors while focusing on certain aspects of infrared and millimeter waves, such as sources of radiation, instrumentation, and millimeter systems. This volume covers millimeter components and techniques. The first chapter is a review of indium phosphide and gallium arsenide transferred-electron devices, while the next chapter covers nonradiative dielectric waveguide. Chapter 3 discusses groove guide for short millimetric waveguide systems. This book then tackles the application of oversized cavities for millimeter-wave spectroscopy, and Chapter 5 discusses powerful gyrotrons. Chapter 6 covers some perspectives on operating frequency increase in gyrotrons; Chapter 7 covers phase noise and AM noise measurement in the frequency domain. The last chapter discusses the basic design considerations for free-electron lasers driven by electron beams from rf. This book will be of great use to researchers or professionals whose work involves infrared and millimeter waves.
Download or read book Modern Millimeter wave Technologies written by Tasuku Teshirogi and published by IOS Press. This book was released on 2001 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text covers the study of millimeter-waves from the basics to the state-of-the-art devices and application systems.
Download or read book Infrared and Millimeter Waves V12 written by Kenneth J. Button and published by Elsevier. This book was released on 1984-12-28 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared and Millimeter Waves, Volume 12: Electromagnetic Waves in Matter, Part II compiles the work of several authors while focusing on certain aspects of infrared and millimeter waves, such as sources of radiation, instrumentation, and millimeter systems. This volume covers electromagnetic waves in matter. Consist of six chapters, this book deals first with the millimeter-wave dielectric properties of materials, and then discusses low-frequency vibrations in long-chain molecules and polymers by far-infrared spectroscopy. The third chapter covers infrared magnetooptical spectroscopy in semiconductors and magnetic materials in high pulsed magnetic fields. Chapter 4 discusses spectral thermal infrared emission of the terrestrial atmosphere. Chapter 5 investigates frequency tuning and efficiency enhancement of high-power far-infrared lasers, while the last chapter discusses far-infrared laser scanner for high-voltage cable inspection. This book will be of great use to researchers or professionals whose work involves infrared and millimeter waves.
Download or read book Infrared and Millimeter Waves V5 written by Kenneth J. Button and published by Elsevier. This book was released on 1982-04-28 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared and Millimeter Waves is a series of books that compiles the work of several authors, with each volume focusing on certain aspects of infrared and millimeter waves, such as sources of radiation, instrumentation, and millimeter systems. This book is the first of a two-part volume that covers the coherent sources and applications of infrared and millimeter waves. The first chapter discusses sources and applications, while the second chapter provides a comprehensive discussion about spectroscopy of molecules by far-infrared laser emission. This is followed by a discussion of stark spectroscopy and frequency tuning in optically pumped far-infrared molecular lasers. Measured performance of gyrotron oscillators and amplifiers is also covered. This book will be of great use to researchers and professionals whose work involves infrared and millimeter waves.
Download or read book Infrared and Millimeter Waves V9 written by Kenneth J. Button and published by Elsevier. This book was released on 1983-01-01 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared and Millimeter Waves, Volume 9: Millimeter Components and Techniques, Part I compiles the work of several authors while focusing on certain aspects of infrared and millimeter waves, such as sources of radiation, instrumentation, and millimeter systems. This volume deals with millimeter components and techniques. Chapter 1 covers millimeter wave communications, and then the succeeding chapter discusses a comparative study of millimeter waves and transmission lines. This book then tackles dielectric waveguide electrooptic devices, as well as millimeter-wave propagation and remote sensing of the atmosphere, which are covered in Chapter 4. The fifth chapter presents the technology of large radio telescopes for millimeter and submillimeter. The next chapter explains a gyrotron study program, and the last chapter discusses multimode analysis of quasi-optical gyrotrons and gyroklystrons. This book will be of great use for researchers or professionals whose work involves infrared and millimeter waves.
Download or read book Infrared and Millimeter Waves V15 written by Kenneth J. Button and published by Elsevier. This book was released on 1986-01-01 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared and Millimeter Waves, Volume 15: Millimeter Components and Techniques, Part VI is concerned with millimeter-wave guided propagation and integrated circuits. This book covers low-noise receiver technology for near-millimeter wavelengths; dielectric image-line antennas; EHF satellite communications (SATCOM) terminal antennas; and semiconductor antennas for millimeter-wave integrated circuits. A scanning airborne radiometer for 30 and 90 GHz and a self-oscillating mixer are also described. This monograph is comprised of six chapters and begins with a discussion on the design of low-noise receivers, with emphasis on problems encountered at near-millimeter wavelengths. Optimization of the material parameters and device topology for both Schottky-barrier diodes and superconducting mixer elements are considered. Some representative examples of state-of-the-art mixers and receivers, designed to operate at frequencies of 100-1000 GHz, are given in order to illustrate the way in which practical, high-performance millimeter-wave devices can be constructed. The following chapters focus on a scanning airborne radiometer for 30 and 90 GHz; a self-oscillating mixer; dielectric image-line antennas; and EHF SATCOM terminal antennas. The final chapter is devoted to semiconductor dipole antennas for millimeter-wave sensors, with particular reference to the basic concepts leading to the development of semiconductor dipoles. A theoretical formulation for tubular semiconductor dipoles is outlined and numerical results are presented to assess their characteristics. This text will be a valuable resource for physicists and electronics and electrical engineers.
Download or read book Infrared and Millimeter Waves V14 written by Kenneth J. Button and published by Elsevier. This book was released on 1985-11-28 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared and Millimeter Waves, Volume 14: Millimeter Components and Techniques, Part V is concerned with millimeter-wave guided propagation and integrated circuits. In addition to millimeter-wave planar integrated circuits and subsystems, this book covers transducer configurations and integrated-circuit techniques, antenna arrays, optoelectronic devices, and tunable gyrotrons. Millimeter-wave gallium arsenide (GaAs) IMPATT diodes are also discussed. This monograph is comprised of six chapters and begins with a description of millimeter-wave integrated-circuit transducers, focusing on various designs and trade-offs and providing hardware examples. The next chapter deals with millimeter-wave planar integrated circuits based on three transmission media: microstrip lines, suspended strip lines, and fin lines. Various transmission media and substrates are first considered, followed by design considerations and performances of several integrated-circuit components, including mixers, IMPATT oscillators, frequency multipliers, switches, filters, couplers, and ferrite devices. A few selected subsystems are also discussed. The following chapters look at planar millimeter-wave antenna arrays; optoelectronic devices for millimeter waves; and the state of the art in GaAs IMPATT diode technology for both cw and pulsed modes of operation. The final chapter is devoted to the gyrotron or electron cyclotron resonance maser. This text will be a useful resource for physicists and electronics and electrical engineers.
Download or read book Infrared and Millimeter Waves written by Kenneth J. Button and published by Elsevier. This book was released on 2014-02-06 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared and Millimeter Waves
Download or read book Infrared and Millimeter Waves V10 written by Kenneth J. Button and published by Elsevier. This book was released on 1983-01-01 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared and Millimeter Waves V10
Download or read book Infrared and Millimeter Waves V8 written by Kenneth J. Button and published by Elsevier. This book was released on 1983-01-01 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared and Millimeter Waves, Volume 8: Electromagnetic Waves in Matter, Part I compiles the work of several authors while focusing on certain aspects of infrared and millimeter waves, such as sources of radiation, instrumentation, and millimeter systems. This volume discusses electromagnetic waves in matter. The first chapter covers the properties of the dielectric materials, which is then followed by a discussion of far-infrared spectroscopy on high polymers. Chapter 3 tackles submillimeter solid-state physics, and Chapter 4 reviews the theory of infrared and far-infrared free-carrier behavior in semiconductors. The improvements in pyroelectric detectors are then reviewed. The sixth chapter discusses cyclotron and Zeeman transitions in photoexcited semiconductors at far infrared, while the seventh chapter discusses high temperature infrared reflectivity spectroscopy. Chapter 8 covers millimeter and submillimeter waves' interaction with giant atoms. The last chapter is about spectroscopy of InAs-GaSb layered structures. This book will be of great use to researchers or professionals whose work involves infrared and millimeter waves.