Download or read book Microwave Processing of Ceramics and Ceramic Composites Using a Single mode Microwave Cavity written by Ki-Yong Lee and published by . This book was released on 1998 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microwave Processing of Ceramics at Northwestern University written by D. Lynn Johnson and published by . This book was released on 1992 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic rods have been sintered in cold wall single mode microwave cavities under a variety of conditions, including microwave heating and plasma heating. High sintering rates, high density and fine grain sizes were achieved for Beta-alumina and A12O3-TiC composites under favorable conditions. Thermal run-away often was observed in alumina during microwave heating if the heating rate was more than a few degrees per second. On the other hand, microwave plasma sintering of alumina was accomplished at very high heating rates (100 K/s).

Download or read book Processing and Properties of Advanced Ceramics and Composites VII written by Morsi M. Mahmoud and published by John Wiley & Sons. This book was released on 2015-10-05 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 40 papers from the following 10 Materials Science and Technology (MS&T'14) symposia: Rustum Roy Memorial Symposium: Processing and Performance of Materials Using Microwaves, Electric and Magnetic Fields, Ultrasound, Lasers, and Mechanical Work Advances in Dielectric Materials and Electronic Devices Innovative Processing and Synthesis of Ceramics, Glasses and Composites Advances in Ceramic Matrix Composites Sintering and Related Powder Processing Science and Technology Advanced Materials for Harsh Environments Thermal Protection Materials and Systems Advanced Solution Based Processing for Ceramic Materials Controlled Synthesis, Processing, and Applications of Structure and Functional Nanomaterials Surface Protection for Enhanced Materials Performance

Download or read book Microwave Chemical and Materials Processing written by Satoshi Horikoshi and published by Springer. This book was released on 2017-11-28 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principal aim of this book is to introduce chemists through a tutorial approach to the use of microwaves by examining several experiments of microwave chemistry and materials processing. It will subsequently enable chemists to fashion their own experiments in microwave chemistry or materials processing. Microwave heating has become a popular methodology in introducing thermal energy in chemical reactions and material processing in laboratory-scale experiments. Several research cases where microwave heating has been used in a wide range of fields have been reported, including organic synthesis, polymers, nanomaterials, biomaterials, and ceramic sintering, among others. In most cases, microwave equipment is used as a simple heat source. Therefore the principal benefits of microwave radiation have seldom been taken advantage of. One reason is the necessity to understand the nature of electromagnetism, microwave engineering, and thermodynamics. However, it is difficult for a chemist to appreciate these in a short time, so they act as barriers for the chemist who might take an interest in the use of microwave radiation. This book helps to overcome these barriers by using figures and diagrams instead of equations as much as possible.

Download or read book Microwave Processing of Materials written by National Research Council and published by National Academies Press. This book was released on 1994-02-01 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwaves can be effectively used in the processing of industrial materials under a wide range of conditions. However, microwave processing is complex and multidisciplinary in nature, and a high degree of technical knowledge is needed to determine how, when, and where the technology can be most profitably utilized. This book assesses the potential of microwave technology for industrial applications, reviews the latest equipment and processing methods, and identifies both the gaps in understanding of microwave processing technology and the promising development opportunities that take advantage of this new technology's unique performance characteristics.

Download or read book Advances in Joining of Ceramics written by Charles A. Lewinsohn and published by John Wiley & Sons. This book was released on 2012-04-11 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Joining remains an enabling technology in several key areas related to the use of ceramics. Development of ceramic materials for electronic, biomedical, power generation, and many other fields continues at a rapid pace. Joining of ceramics is a critical issue in the integration of ceramic components in engineering design. This book includes reviews on the state-of-the-art in ceramic joining, new joining materials and methods, and modeling joint behavior and properties. Proceedings of the symposium held at the 104th Annual Meeting of The American Ceramic Society, April 28-May1, 2002 in Missouri; Ceramic Transactions, Volume 138

Download or read book Application of Microwave Processing to Simultaneous Sintering and Joining of Ceramics written by X. D. Yu and published by . This book was released on 1992 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simultaneous sintering and joining of ceramics, often referred to as green state joining, is used in producing structural and electronic composites as well as complex-shaped ceramic components. In this paper, a novel idea of using microwave energy to simultaneously sinter and join ceramics is proposed. Alumina green samples are fired and joined in a single mode microwave heating device. Scanning Electron Microscope and Scanning Acoustic Microscope are used to evaluate joining interface. Experimental results show that, because microwaves offer rapid and uniform heating, fast densification and excellent joining can be achieved.

Download or read book Ceramics and Composites Processing Methods written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2012-04-17 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the latest processing and fabrication methods There is increasing interest in the application of advanced ceramic materials in diverse areas such as transportation, energy, environmental protection and remediation, communications, health, and aerospace. This book guides readers through a broad selection of key processing techniques for ceramics and their composites, enabling them to manufacture ceramic products and components with the properties needed for various industrial applications. With chapters contributed by internationally recognized experts in the field of ceramics, the book includes traditional fabrication routes as well as new and emerging approaches in order to meet the increasing demand for more reliable ceramic materials. Ceramics and Composites Processing Methods is divided into three sections: * Densification, covering the fundamentals and practice of sintering, pulsed electric current sintering, and viscous phase silicate processing * Chemical Methods, examining colloidal methods, sol-gel, gel casting, polymer processing, chemical vapor deposition, chemical vapor infiltration, reactive melt infiltration, and combustion synthesis * Physical Methods, including directional solidification, solid free-form fabrication, microwave processing, electrophoretic deposition, and plasma spraying Each chapter focuses on a particular processing method or approach. Collectively, these chapters offer readers comprehensive, state-of-the-science information on the many approaches, techniques, and methods for the processing and fabrication of advanced ceramics and ceramic composites. With its coverage of the latest processing methods, Ceramics and Composites Processing Methods is recommended for researchers and students in ceramics, materials science, structural materials, biomedical engineering, and nanotechnology.

Download or read book Composite Materials Processing Using Microwave Heating Technology written by Manoj Kumar Singh and published by Springer Nature. This book was released on with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microwave Processing of Ceramics at the University of Utah Description of Activities and Summary of Progress written by M. F. Iskander and published by . This book was released on 1992 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: An interdisciplinary effort to address certain modeling, measurements, and characterization aspects of microwave processing of ceramics was initiated at the University of Utah almost a year ago. The FDTD method was used to model EM power deposition patterns in single-mode cavities, some microwave sintering experiments were conducted in a multimode cavity and using SiC rods as process stimulus, and a wide variety of dielectric and thermophysical properties were measured on microwave and conventionally sintered samples. This paper summarizes these efforts and presents initial results.

Download or read book Processing and Properties of Advanced Ceramics and Composites VII written by Morsi M. Mahmoud and published by John Wiley & Sons. This book was released on 2015-10-06 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 40 papers from the following 10 Materials Science and Technology (MS&T'14) symposia: Rustum Roy Memorial Symposium: Processing and Performance of Materials Using Microwaves, Electric and Magnetic Fields, Ultrasound, Lasers, and Mechanical Work Advances in Dielectric Materials and Electronic Devices Innovative Processing and Synthesis of Ceramics, Glasses and Composites Advances in Ceramic Matrix Composites Sintering and Related Powder Processing Science and Technology Advanced Materials for Harsh Environments Thermal Protection Materials and Systems Advanced Solution Based Processing for Ceramic Materials Controlled Synthesis, Processing, and Applications of Structure and Functional Nanomaterials Surface Protection for Enhanced Materials Performance

Download or read book Journal of Advanced Materials written by and published by . This book was released on 2003 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 16th Annual Conference on Composites and Advanced Ceramic Materials Part 2 of 2 Volume 13 Issue 9 10 written by John B. Wachtman and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.

Download or read book Microwave Assisted Organic Synthesis written by Jason Tierney and published by John Wiley & Sons. This book was released on 2009-02-12 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first reports on the application of microwaves in organicsynthesis date back to 1986, but it was not until the recentintroduction of specifically designed and constructed equipment,which countered the safety and reproducibility concerns, thatsynthetic application of microwaves has become established as alaboratory technique. Microwave assisted synthesis is now beingadopted in many industrial and academic laboratories to takeadvantage of the novel chemistry that can be carried out using avariety of organic reaction types. This book demonstrates the underlying principles of microwavedielectric heating and, by reference to a range of organic reactiontypes, it's effective use in synthetic organic chemistry. Toillustrate the impact microwave assisted organic synthesis can haveon chemical research, case studies drawn mainly from thepharmaceutical industry are presented.

Download or read book Industrial Microwave Heating written by A. C. Metaxas and published by IET. This book was released on 1983 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a broad coverage of the theory and practice of industrial microwave heating. It introduces the physical processes behind dipolar and conductivity loss mechanisms and follows with a thorough presentation of dielectric property data of many industrial materials as a function of the moisture content, temperature and frequency, focussing on the interpretation of such data as regards the suitabiliy for processing these materials with microwave energy. The basic equations which govern the power dissipation, attenuation, phase constant, penetration depth and skin depth are derived from first principles while the transport equations of heat, mass and pressure are qualitatively described, giving particular emphasis to the physical mechanisms behind high frequency drying. The book provides established procedures backed by theoretical formulations for the design of industrial travelling wave and multimode applicators. It also provides extensive coverage of single mode fundamental or higher order resonant cavities and outlines a number of atypical applicator structures. It describes the essential features of processing with microwaves under vacuum and presents a brief introduction to the mechanisms which lead to gas breakdown. It stresses the need for a degree of hybridisation with other electrical or conventional heating systems and discusses a few such schemes. The book outlines a number of systems for limiting leakage from on-line industrial microwave systems and concludes with an extensive discussion of successful industrial applications.

Download or read book Processing and Properties of Advanced Ceramics and Composites IV written by J. P. Singh and published by John Wiley & Sons. This book was released on 2012-09-28 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributed papers from the 2011 Materials Science and Technology symposia, this is a useful one-stop resource for understanding the most important issues in the processing and properties of advanced ceramics and composites. Logically organized and carefully selected, the articles cover the themes of the symposia: Innovative Processing and Synthesis of Ceramics, Glasses and Composites; Advances in Ceramic Matrix Composites; Solution-Based Processing of Materials; and Microwave Processing of Materials. A must for academics in mechanical and chemical engineering, materials and or ceramics, and chemistry.

Download or read book Joining of Ceramic Materials Using Spin on Interlayer written by Jong-Gi Lee and published by . This book was released on 2000 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: