Download or read book Microstructure Property Optimization in Metallic Glasses written by Baran Sarac and published by Springer. This book was released on 2015-03-12 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis consists of an in-depth study of investigating microstructure-property relationships in bulk metallic glasses using a novel quantitative approach by which influence of the second phase features on mechanical properties can be independently and systematically analyzed. The author evaluates and optimizes the elastic and plastic deformation, as well as the overall toughness of cellular honeycombs under in-plane compression and porous heterostructures under uniaxial tension. The study reveals three major deformation zones in cellular metallic glass structures, where deformation changes from collective buckling showing non-linear elasticity to localized failure exhibiting a brittle-like deformation, and finally to global sudden failure with negligible plasticity as the length to thickness ratio of the ligaments increases. The author found that spacing and size of the pores, the pore configuration within the matrix, and the overall width of the sample determines the extent of deformation, where the optimized values are attained for pore diameter to spacing ratio of one with AB type pore stacking.
Download or read book Bulk Metallic Glasses written by C. Suryanarayana and published by CRC Press. This book was released on 2017-11-22 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the fast pace of research in the field, the Second Edition of Bulk Metallic Glasses has been thoroughly updated and remains essential reading on the subject. It incorporates major advances in glass forming ability, corrosion behavior, and mechanical properties. Several of the newly proposed criteria to predict the glass-forming ability of alloys have been discussed. All other areas covered in this book have been updated, with special emphasis on topics where significant advances have occurred. These include processing of hierarchical surface structures and synthesis of nanophase composites using the chemical behavior of bulk metallic glasses and the development of novel bulk metallic glasses with high-strength and high-ductility and superelastic behavior. New topics such as high-entropy bulk metallic glasses, nanoporous alloys, novel nanocrystalline alloys, and soft magnetic glassy alloys with high saturation magnetization have also been discussed. Novel applications, such as metallic glassy screw bolts, surface coatings, hyperthermia glasses, ultra-thin mirrors and pressure sensors, mobile phone casing, and degradable biomedical materials, are described. Authored by the world’s foremost experts on bulk metallic glasses, this new edition endures as an indispensable reference and continues to be a one-stop resource on all aspects of bulk metallic glasses.
Download or read book Metallic Glasses written by Keith K.C. Chan and published by MDPI. This book was released on 2018-07-02 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Metallic Glasses" that was published in Metals
Download or read book Nanomaterials and Devices Processing and Applications written by S. Ray and published by Trans Tech Publications Ltd. This book was released on 2009-04-01 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of this special collection was the applied aspects of nano-materials; with almost all of the papers presented discussing experimental research.
Download or read book Metallic Glasses written by Hu Huang and published by BoD – Books on Demand. This book was released on 2018-09-19 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic glasses are very promising engineering and functional materials due to their unique mechanical, chemical, and physical properties, attracting increasing attention from both scientific and industrial communities. However, their practical applications are greatly hindered due to three main problems: dimensional limit, poor tension plasticity, and difficulty in machining and shaping. Therefore, further investigation of these issues is urgently required. This book provides readers with recent achievements and developments in the properties and processing of metallic glasses, including mainly thermoplastic forming of metallic glasses (Chapter 2), atomic-level simulation of mechanical deformation of metallic glasses (Chapter 3), metallic glass matrix composites (Chapter 4), and tribo-electrochemical applications of metallic glasses (Chapters 5 and 6).
Download or read book Bulk Metallic Glasses and Their Composites written by Muhammad Musaddique Ali Rafique and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-09-20 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a comprehensive state-of-the-art review on the topic of bulk metallic glass matrix composites and understanding of mechanisms of development of composite microstructure. It discusses mechanisms of formation and toughening both during conventional casting routes and additive manufacturing. The second edition encompasses new studies and highlights advancement in mechanical properties, characterization, processing and applications.
Download or read book Methods and Applications of Autonomous Experimentation written by Marcus Noack and published by CRC Press. This book was released on 2023-12-14 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: · Provides a holistic and practical guide to autonomous experimentation · Combines insights from theorists, machine-learning engineers and applied scientists to dispel common myths and misconceptions surrounding autonomous experimentation. · Incorporates practitioners’ first-hand experience
Download or read book Physical Metallurgy written by David E. Laughlin and published by Newnes. This book was released on 2014-07-24 with total page 2963 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fifth edition of the highly regarded family of titles that first published in 1965 is now a three-volume set and over 3,000 pages. All chapters have been revised and expanded, either by the fourth edition authors alone or jointly with new co-authors. Chapters have been added on the physical metallurgy of light alloys, the physical metallurgy of titanium alloys, atom probe field ion microscopy, computational metallurgy, and orientational imaging microscopy. The books incorporate the latest experimental research results and theoretical insights. Several thousand citations to the research and review literature are included. - Exhaustively synthesizes the pertinent, contemporary developments within physical metallurgy so scientists have authoritative information at their fingertips - Replaces existing articles and monographs with a single, complete solution - Enables metallurgists to predict changes and create novel alloys and processes
Download or read book Amorphous Metallic Alloys written by BURTON and published by Elsevier. This book was released on 2013-10-22 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amorphous Metallic Alloys covers the preparation and properties of alloys produced by rapid quenching from the molten state. This book focuses on three technologically important classes of magnetic amorphous alloy—transition metal-metalloid (TM-M) alloys, rare earth-transition metal (RE-TM) alloys, and transition metal-zirconium or hafnium alloys (TM-Zr-Hf). The melt-quenched transition metal-metalloid and transition metal-zirconium type alloys are also emphasized. This text likewise explains in detail how amorphous atomic structure affects magnetic, mechanical, chemical, corrosion, and electrical characteristics. Other topics include glass forming ability in metallic materials, scattering theory of amorphous metals, dynamics of inhomogeneous plastic flow, and powder production processes. This publication is intended for students and researchers conducting work on amorphous metallic alloys.
Download or read book Complex Metallic Alloys written by Jean-Marie Dubois and published by John Wiley & Sons. This book was released on 2010-12-13 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering fundamental research as well as real-world applications, this first book on CMAs at an introductory level treats everything from atomistic details to surface processing. Comprehensive, self-contained chapters provide readers with the latest knowledge on the most salient features of the topic, selected in terms of their relevance to potential technological applications. Edited by one of the most distinguished authorities on quasicrystals and this most important of their subclasses, the contributions elucidate aspects of CMAs from a particular viewpoint: physical and chemical characteristics in the sub-nanometer regime, mesoscale phenomena, preparation and processing of thin films, and large-scale engineering properties. The whole is rounded off by a look at the commercial potential of CMA-based applications. For PhD students and lecturers alike.
Download or read book Dynamical Heterogeneities in Glasses Colloids and Granular Media written by Ludovic Berthier and published by OUP Oxford. This book was released on 2011-07-14 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most of the solid materials we use in everyday life, from plastics to cosmetic gels exist under a non-crystalline, amorphous form: they are glasses. Yet, we are still seeking a fundamental explanation as to what glasses really are and to why they form. In this book, we survey the most recent theoretical and experimental research dealing with glassy physics, from molecular to colloidal glasses and granular media. Leading experts in this field present broad and original perspectives on one of the deepest mysteries of condensed matter physics, with an emphasis on the key role played by heterogeneities in the dynamics of glassiness.
Download or read book High Entropy Alloys written by Michael C. Gao and published by Springer. This book was released on 2016-04-27 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and comprehensive description of high-entropy alloys (HEAs). The authors summarize key properties of HEAs from the perspective of both fundamental understanding and applications, which are supported by in-depth analyses. The book also contains computational modeling in tackling HEAs, which help elucidate the formation mechanisms and properties of HEAs from various length and time scales.
Download or read book Protective Thin Coatings Technology written by Sam Zhang and published by CRC Press. This book was released on 2021-08-09 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hard or protective coatings are widely used in conventional and modern industries and will continue to play a key role in future manufacturing, especially in the micro and nano areas. Protective Thin Coatings Technology highlights the developments and advances in the preparation, characterization, and applications of protective micro-/nanoscaled films and coatings. This book Covers technologies for sputtering of flexible hard nanocoatings, deposition of solid lubricating films, and multilayer transition metal nitrides Describes integrated nanomechanical characterization of hard coatings, corrosion and tribo-corrosion of hard coatings, and high entropy alloy films and coatings Investigates thin films and coatings for high-temperature applications, nanocomposite coatings on magnesium alloys, and the correlation between coating properties and industrial applications Features various aspects of hard coatings, covering advanced sputtering technologies, structural characterizations, and simulations, as well as applications This first volume in the two-volume set, Protective Thin Coatings and Functional Thin Films Technology, will benefit industry professionals and researchers working in areas related to semiconductors, optoelectronics, plasma technology, solid-state energy storages, and 5G, as well as advanced students studying electrical, mechanical, chemical, and material engineering.
Download or read book Mechanical Properties of Nanocrystalline Materials written by James C. M. Li and published by CRC Press. This book was released on 2011-09-02 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concentrates on both understanding and development of nanocrystalline materials. The original relation that connects grain size and strength, known as the Hall-Petch relation, is studied in the nanometer grain size region. The breakdown of such a relation is a challenge. Why and how to overcome it? Is the dislocation mechanism still operating when the grain size is very small, approaching the amorphous limit? How do we go from the microstructure information to the continuum description of the mechanical properties?
Download or read book Architectured Materials in Nature and Engineering written by Yuri Estrin and published by Springer. This book was released on 2019-03-27 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with a group of architectured materials. These are hybrid materials in which the constituents (even strongly dissimilar ones) are combined in a given topology and geometry to provide otherwise conflicting properties. The hybridization presented in the book occurs at various levels - from the molecular to the macroscopic (say, sub-centimeter) ones. This monograph represents a collection of programmatic chapters, defining archimats and summarizing the results obtained by using the geometry-inspired materials design. The area of architectured or geometry-inspired materials has reached a certain level of maturity and visibility for a comprehensive presentation in book form. It is written by a group of authors who are active researchers working on various aspects of architectured materials. Through its 14 chapters, the book provides definitions and descriptions of the archetypes of architectured materials and addresses the various techniques in which they can be designed, optimized, and manufactured. It covers a broad realm of archimats, from the ones occurring in nature to those that have been engineered, and discusses a range of their possible applications. The book provides inspiring and scientifically profound, yet entertaining, reading for the materials science community and beyond.
Download or read book Complex Concentrated Alloys CCAs written by Sundeep Mukherjee and published by MDPI. This book was released on 2020-11-04 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of several unique articles on the current state of research on complex concentrated alloys, as well as their compelling future opportunities in wide ranging applications. Complex concentrated alloys consist of multiple principal elements and represent a new paradigm in structural alloy design. They show a range of exceptional properties that are unachievable in conventional alloys, including high strength–ductility combination, resistance to oxidation, corrosion/wear resistance, and excellent high-temperature properties. The research articles, reviews, and perspectives are intended to provide a wholistic view of this multidisciplinary subject of interest to scientists and engineers.
Download or read book Research in British Universities Polytechnics and Colleges written by and published by . This book was released on 1984 with total page 1068 pages. Available in PDF, EPUB and Kindle. Book excerpt:
