Download or read book Microstructure and Properties of Thermally Sprayed Functionally Graded Coatings for Polymeric Substrates written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-20 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of polymer matrix composites (PMCs) in the gas flow path of advanced turbine engines offers significant benefits for aircraft engine performance but their useful lifetime is limited by their poor erosion resistance. High velocity oxy-fuel (HVOF) sprayed polymer/cermet functionally graded (FGM) coatings are being investigated as a method to address this technology gap by providing erosion and oxidation protection to polymer matrix composites. The FGM coating structures are based on a polyimide matrix filled with varying volume fractions of WC-Co. The graded coating architecture was produced using a combination of internal and external feedstock injection, via two computer-controlled powder feeders and controlled substrate preheating. Porosity, coating thickness and volume fraction of the WC-Co filler retained in the coatings were determined using standard metallographic techniques and computer image analysis. The pull-off strength (often referred to as the adhesive strength) of the coatings was evaluated according to the ASTM D 4541 standard test method, which measured the greatest normal tensile force that the coating could withstand. Adhesive/cohesive strengths were determined for three different types of coating structures and compared based on the maximum indicated load and the surface area loaded. The nature and locus of the fractures were characterized according to the percent of adhesive and/or cohesive failure, and the tested interfaces and layers involved were analyzed by Scanning Electron Microscopy. Ivosevic, M. and Knight, R. and Kalidindi, S. R. and Palmese, G. R. and Sutter, J. K. Glenn Research Center NASA/TM-2003-212119, E-13771, NAS 1.15:212119
Download or read book Microstructure and Properties of Thermally Sprayed Functionally Graded Coatings for Polymeric Substrates written by and published by . This book was released on 2003 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book MICROSTRUCTURE AND PROPERTIES OF THERMALLY SPRAYED FUNCTIONALLY GRADED COATINGS FOR POLYMERIC SUBSTRATES NASA TM 2003 212119 NATIONAL written by United States. National Aeronautics and Space Administration and published by . This book was released on 2003* with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Spray 2004 written by and published by ASM International. This book was released on 2004-01-01 with total page 1150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume representing the second International Thermal Spray Conference (May 2004, Osaka, Japan) contains 232 papers and 93 poster presentations. Arrangement is in sections on applications, characterization methods for coating properties, coating technologies for vehicle engines, cold spray, consumables for thermal spraying, corrosion protection, economics and quality, HVOF processes and materials, innovative equipment and process technology, modeling and simulation, nanostructured materials, photocatalytic materials, process diagnostics, protective coatings against wear and erosion, and thermal barrier coatings. No index is provided, but the included CD- ROM presumably contains the contents in a searchable format. Annotation :2004 Book News, Inc., Portland, OR (booknews.com).
Download or read book Functionally Graded Materials FGMs written by Pulak M. Pandey and published by CRC Press. This book was released on 2021-09-14 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: The science and study of functionally graded materials (FGMs) have intrigued researchers over the last few decades. Their application has the capability to produce parts with unmatched properties which are virtually impossible to obtain via conventional material routes. This book addresses various FGM aspects and provides a relevant, high-quality, and comprehensive data source. The book covers trends, process classification on various bases, physical processes involved, structure, properties, applications, advantages, and limitations. Emerging trends in the field are discussed in detail and advancements are thoroughly reviewed and presented to broaden the spectrum of FGM applications. This reference book will be of interest to scholars, researchers, academicians, industry practitioners, government labs, libraries, and anyone interested in the area of materials engineering.
Download or read book Development of Thermally Sprayed Functionally Graded Coatings for Polymer Matrix Composites written by Milan Ivos̆ević and published by . This book was released on 2003 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Spray Fundamentals written by Pierre L. Fauchais and published by Springer Science & Business Media. This book was released on 2014-01-24 with total page 1587 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with the fundamentals necessary for understanding thermal spray technology. Coverage includes in-depth discussions of various thermal spray processes, feedstock materials, particle-jet interactions, and associated yet very critical topics: diagnostics, current and emerging applications, surface science, and pre and post-treatment. This book will serve as an invaluable resource as a textbook for graduate courses in the field and as an exhaustive reference for professionals involved in thermal spray technology.
Download or read book Thermal Sprayed Coatings and their Tribological Performances written by Roy, Manish and published by IGI Global. This book was released on 2015-01-31 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal spraying is a dynamic process and a rapidly changing field which is used in a variety of industries to solve a number of challenging problems including performance enhancement and extending the life of industrial components which are subjected to wear corrosion. Thermal Sprayed Coatings and their Tribological Performances showcases the latest research surrounding the development and use of thermal spraying techniques as well as the benefits of using thermal sprayed coatings in the industrial sector. Focusing on practical solutions that can be applied to real-world settings, this publication is ideally designed for academicians, upper-level students, as well as engineers and operations managers across industries.
Download or read book Thermal Spray Coatings Materials Techniques Applications written by Santosh Kumar and published by Bentham Science Publishers. This book was released on 2024-07-30 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book explores the techniques, materials, and real-world applications of thermal spray coatings across various industries, including power generation, aerospace, medical, and automotive sectors. Readers will learn about the basic science and engineering aspects of thermal spray technology, its historical developments, and the diverse range of materials used, from metallic to ceramic materials, and nano-crystallization materials. Distinct thermal spray techniques are explained (flame spray, detonation-gun spray, high-velocity oxy-fuel spray, electric arc spray, plasma spray and cold spray). Chapters on advanced topics also give an understanding of crucial material properties such as high temperature corrosion, oxidation, erosion or wear resistance, and biocompatibility. Key features - Contributions from materials science experts with references for each topic - Gives a comprehensive overview of materials and distinct spray techniques used in thermal coatings - Dedicated chapters for applications of thermal coatings in different industries - Covers recent trends and new advances such as surface modification techniques to improve functionality and performance This book is intended as a resource for an in-depth understanding of the fundamentals and applications of thermal spray coatings for students, professionals and researchers in materials science and chemical engineering disciplines.
Download or read book Optimal Substrate Preheating Model for Thermal Spray Deposition of Thermosets Onto Polymer Matrix Composites written by and published by . This book was released on 2003 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Spray Fundamentals written by Maher I. Boulos and published by Springer Nature. This book was released on 2021-10-19 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully revised, industry-standard resource offers practical details on every aspect of the fundamentals necessary for understanding thermal spray technology, from powder all the way to the final part. The second edition is presented in a reader-friendly format that is split into four parts. Part I presents a review of thermal spray coating and its position in the broad field of surface modification technologies. Highlights of combustion and thermal plasmas are given with an expanded treatment of in-flight plasma-particle interactions. The second and third parts deal respectively with an updated presentation of thermal spray technologies and coating formation, including solution and suspension plasma spraying. The last part of the book includes a comparative analysis of different thermal spray processes, which is essential for the optimal selection of the appropriate thermal spray process in a given application. Coverage of system integration has been expanded with the addition of a detailed discussion of online instrumentation and process diagnostics and numerous examples of industrial scale spray booth designs. Attention is also given to coating finishing and health and safety issues. An extensive review is presented of thermal spray applications grouped in terms of process objectives and present use in different industrial sectors. This book will serve as an invaluable resource as a textbook for graduate courses in the field and as an exhaustive reference for professionals involved in the thermal spray field.
Download or read book Additive Manufacturing written by Juan Pou and published by Elsevier. This book was released on 2021-05-21 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing explains the background theory, working principles, technical specifications, and latest developments in a wide range of additive manufacturing techniques. Topics addressed include treatments of manufactured parts, surface characterization, and the effects of surface treatments on mechanical behavior. Many different perspectives are covered, including design aspects, technologies, materials and sustainability. Experts in both academia and industry contribute to this comprehensive guide, combining theoretical developments with practical improvements from R&D. This unique guide allows readers to compare the characteristics of different processes, understand how they work, and provide parameters for their effective implementation. This book is part of a four-volume set entitled Handbooks in Advanced Manufacturing. Other titles in the set include Advanced Machining and Finishing, Advanced Welding and Deformation, and Sustainable Manufacturing Processes. - Provides theory, operational parameters, and latest developments in 20 different additive manufacturing processes - Includes contributions from experts in industry and academia with a wide range of disciplinary backgrounds, providing a comprehensive survey of this diverse and influential subject - Includes case studies of innovative additive manufacturing practices from industry
Download or read book Production Properties and Applications of High Temperature Coatings written by Pakseresht, Amir Hossein and published by IGI Global. This book was released on 2018-01-12 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat resistant layers are meant to withstand high temperatures while also protecting against all types of corrosion and oxidation. Therefore, the micro-structure and behavior of such layers is essential in understanding the functionality of these materials in order to make improvements. Production, Properties, and Applications of High Temperature Coatings is a critical academic publication which examines the methods of creation, characteristics, and behavior of materials used in heat resistant layers. Featuring coverage on a wide range of topics such as, thermal spray methods, sol-gel coatings, and surface nanoengineering, this book is geared toward students, academicians, engineers, and researchers seeking relevant research on the methodology and materials for producing effective heat resistant layers.
Download or read book Metal Polymer Coatings on Light Alloys written by Anil Kumar and published by Self Publisher. This book was released on 2023-09-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Metal Polymer Coatings on Light Alloys" is a comprehensive guide written by Jerin K. Pancrecious that explores the various aspects of metal polymer coatings and their application on light alloys. The book discusses the different coating techniques, properties, performance, and evaluation methods of metal polymer coatings on aluminum, magnesium, titanium, zinc, nickel, copper, and iron alloys. The author examines the importance of surface treatment and coating deposition, and their impact on coating properties such as adhesion, microstructure, thickness, porosity, roughness, friction, hardness, toughness, and durability. Polymer materials, including their matrix and chemistry, are also discussed in detail. The book covers various types of coatings, such as nanocomposite coatings, multilayer coatings, functionally graded coatings, plasma spraying, thermal spray coatings, PVD coatings, CVD coatings, sol-gel coatings, self-assembly coatings, and smart coatings. The book also delves into the environmental effects of metal polymer coatings and their industrial applications. The author explains how metal polymer coatings provide corrosion and wear resistance to light alloys, improving their durability and lifespan. This book is a valuable resource for researchers, engineers, and practitioners who work with metal polymer coatings and light alloys. It provides insights into the design, optimization, and manufacturing of metal polymer coatings on light alloys for various applications.
Download or read book Surface Coating and Modification of Metallic Biomaterials written by Cuie Wen and published by Woodhead Publishing. This book was released on 2015-03-31 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite advances in alternative materials, metals are still the biomaterial of choice for a number of clinical applications such as dental, orthopedic and cardiac implants. However, there are a number of intrinsic problems associated with implanting metal in the biological environment, such as wear, corrosion, biocompatibility and toxicity, which must be addressed. Modern technology has enabled scientists to modify metal surfaces or apply special coatings to metals to improve their performance safety. Surface Coating and Modification of Metallic Biomaterials will discuss the most important modification techniques and coatings for metals, first covering the fundamentals of metals as a biomaterial and then exploring surface modification techniques and coatings. - An expansive overview of surface modification techniques for biomedical use - In-depth exploration of issues arising from metal biomaterial use - Includes examples of applications in a clinical setting
Download or read book Microstructure and Mechanical Properties of Ceramic and Metallic Thermal Spray Coatings written by Ondrej Racek and published by . This book was released on 2005 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Thermal Spray Technology written by Joseph R. Davis and published by ASM International. This book was released on 2004-01-01 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference covers principles, processes, types of coatings, applications, performance, and testing and analysis of thermal spray technology. It will serve as an introduction and guide for those new to thermal spray, and as a reference for specifiers and users of thermal spray coatings and thermal spray experts. Coverage encompasses basics of th
