Download or read book Microstructure and Mechanical Properties of a Fine Grained AZ91 Magnesium Alloy Prepared by Multi Pass Friction Stir Processing written by and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Magnesium Technology 2020 written by J. Brian Jordon and published by Springer Nature. This book was released on 2020-01-22 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2020 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; and structural applications. In addition, there is coverage of new and emerging applications.
Download or read book Friction Stir Processing of Magnesium Alloys written by Gaurav Bhargava and published by . This book was released on 2009 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Magnesium alloys have been fast catching up their attention in applications where both lightweight and exceptional strength is desired. But magnesium alloys suffer formability issues which limit their use to cast applications when designing complicated shapes. Friction stir processing (FSP) is technique for, imparting a fine-grained, homogeneous microstructure by which both strength and ductility can be enhanced. The results from the first part of present work showed that AZ31 alloy when employed the use of FSP, yielded significant strength and ductility gains but on the cost of anisotropy. The cause of anisotropy was investigated to be correlated to texture evolution during FSP. In the second part, the friction stir lap welding of two different magnesium alloys AZ91 to AM30 has been investigated. The study was aimed to investigate the best tool geometry to yield widest range of defect free parameters along with high strength in welded region. The objective of deciding the best tool geometry was achieved by utilizing hardness profiling of welded regions as well as using process maps for various tool designs. The weld strength of defect free runs was evaluated through mechanical tests; lap shear test and tensile test. The effect of post weld treatment on strength properties was also considered"--Abstract, leaf iv.
Download or read book Magnesium Technology 2011 written by Wim H. Sillekens and published by John Wiley & Sons. This book was released on 2011-04-12 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, which takes place every year at the TMS Annual Meeting & Exhibition, is one of the largest yearly gatherings of magnesium specialists in the world. Papers are presented in all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2011 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, you'll find coverage of new and emerging applications in such areas as biomedicine and hydrogen storage.
Download or read book Microstructure and Mechanical Properties of ECAP Processed AZ91 and AZ80 Magnesium Alloys written by Chuan Wei Chung and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Magnesium written by Karl U. Kainer and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for light-weight materials, especially in the automobile industry, created renewed interest in innovative applications of magnesium materials. This demand has resulted in increased research and development activity in companies and research institutes in order to achieve an improved property profile and better choice of alloy systems. Here, development trends and application potential in different fields like the automotive industry and communication technology are discussed in an interdisciplinary framework.
Download or read book THERMEC 2011 written by Tara Chandra and published by . This book was released on 2012 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Special Issues on Magnesium Alloys written by Waldemar Alfredo Monteiro and published by BoD – Books on Demand. This book was released on 2011-09-12 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium is the lightest of all the metals and the sixth most abundant on Earth. Magnesium is ductile and the most machinable of all the metals. Magnesium alloy developments have traditionally been driven by requirements for lightweight materials to operate under increasingly demanding conditions (magnesium alloy castings, wrought products, powder metallurgy components, office equipment, nuclear applications, flares, sacrificial anodes for the protection of other metals, flash photography and tools). The biggest potential market for magnesium alloys is in the automotive industry. In recent years new magnesium alloys have demonstrated a superior corrosion resistance for aerospace and specialty applications. Considering the information above, special issues on magnesium alloys are exposed in this book: casting technology; surface modification of some special Mg alloys; protective carbon coatings on magnesium alloys; fatigue cracking behaviors of cast magnesium alloys and also, magnesium alloys biocompatibility as degradable implant materials.
Download or read book Surface Engineering by Friction Assisted Processes written by B. Ratna Sunil and published by CRC Press. This book was released on 2019-10-08 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is a comprehensive resource that compiles extensive descriptions of friction stir processing, fabrication of surface metal matrix composites, and friction surfacing into one volume. The book is separated into four sections, beginning with a discussion of surface tailoring of metals by friction stir processing. This first section delves into the basics of friction stir processing (FSP), incorporating illustrations to explain the supporting mechanisms of this process. This section culminates with the introduction of potential applications of FSP in the manufacturing industry and obstacles that may arise when implemented. The following two sections explore and discuss surface metal matrix composites by friction stir processing and surface engineering by friction surfacing. They provide a thorough explanation of the material systems involved in the respective processes and discuss in detail the mechanisms behind each. The book, which closes with a comprehensive discussion of recent developments in friction-assisted processes and their functionality, offers a unique compilation of information on these increasingly prominent developments in the field of surface engineering. This volume organizes the information in a manner that is both easily accessible and comprehensible, utilizing visuals such as figures, tables, and photographs to enhance readers’ understanding. Key features: • Explores a multitude of topics within the field of surface engineering at length • Summarizes and explores the mechanical foundation of friction stir processing, fabrication of surface metal matrix composites, and friction surfacing • Incorporates figures and tables to aid in illustrating the concepts discussed • Offers potential applications and discusses future benefits of specific elements pertaining to surface engineering
Download or read book Magnesium Technology 2012 written by Suveen Mathaudhu and published by Springer. This book was released on 2016-12-19 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, which takes place every year at the TMS Annual Meeting & Exhibition, is one of the largest yearly gatherings of magnesium specialists in the world. Papers are presented in all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2011 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, you'll find coverage of new and emerging applications in such areas as biomedicine and hydrogen storage.
Download or read book The Production of Fine Grained Magnesium Alloys Through Thermomechanical Processing for the Optimization of Microstructural and Mechanical Properties written by John Paul Young and published by . This book was released on 2015 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: The low density and high strength to weight ratio of magnesium alloys makes them ideal candidates to replace many of the heavier steel and aluminum alloys currently used in the automotive and other industries. Although cast magnesium alloys components have a long history of use in the automotive industry, the integration of wrought magnesium alloys components has been hindered by a number of factors. Grain refinement through thermomechanical processing offers a possible solution to many of the inherent problems associated with magnesium alloys. This work explores the development of several thermomechanical processing techniques and investigates their impact on the microstructural and mechanical properties of magnesium alloys. In addition to traditional thermomechanical processing, this work includes the development of new severe plastic deformation techniques for the production of fine grain magnesium plate and pipe and develops a procedure by which the thermal microstructural stability of severely plastically deformed microstructures can be assessed.
Download or read book Magnesium Alloys for Biomedical Applications written by Deepak Kumar and published by CRC Press. This book was released on 2024-04-26 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium alloys have enormous potential for use in biomedical implants. Magnesium Alloys for Biomedical Applications delves into recent advances and prospects for implementation and provides scientific insights into current issues posed by Mg alloy materials. It provides an overview of research on their mechanical and tribological characteristics, corrosion tendencies, and biological characteristics, with a particular emphasis on biomedical implants. Details the fundamentals of Mg alloys as well as necessary surface modifications of Mg alloys for biomedical use. Discusses emerging Mg alloys and their composites. Covers mechanical, tribological, and chemical properties, as well as fatigue and corrosion. Highlights emerging manufacturing methods and advancements in new alloy design, composite manufacturing, unique structure design, surface modification, and recyclability. Helps readers identify appropriate Mg-based materials for their applications and select optimal improvement methods. Summarizes current challenges and suggests a roadmap for future research. Aimed at researchers in materials and biomedical engineering, this book explores the many breakthroughs achieved with these materials and where the field should concentrate to ensure the development of safe and reliable Mg alloy-based implants.
Download or read book Advances in Manufacturing Engineering written by Mithilesh K. Dikshit and published by Springer Nature. This book was released on with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Magnesium Alloys written by Frank Czerwinski and published by BoD – Books on Demand. This book was released on 2011-01-14 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientists and engineers for decades searched to utilize magnesium, known of its low density, for light-weighting in many industrial sectors. This book provides a broad review of recent global developments in theory and practice of modern magnesium alloys. It covers fundamental aspects of alloy strengthening, recrystallization, details of microstructure and a unique role of grain refinement. The theory is linked with elements of alloy design and specific properties, including fatigue and creep resistance. Also technologies of alloy formation and processing, such as sheet rolling, semi-solid forming, welding and joining are considered. An opportunity of creation the metal matrix composite based on magnesium matrix is described along with carbon nanotubes as an effective reinforcement. A mixture of science and technology makes this book very useful for professionals from academia and industry.
Download or read book New Features on Magnesium Alloys written by Waldemar Alfredo Monteiro and published by BoD – Books on Demand. This book was released on 2012-07-11 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium alloys have been attractive to designers due to their low density (two thirds that of aluminium), the sixth most abundant on earth, is ductile and the most machinable of all the metals. This has been a major factor in the widespread use of magnesium alloy castings and wrought products, powder metallurgy components, sacrificial anodes for the protection of other metals, tools. The present book, "New Features on Magnesium Alloys", gives us an overview in some special areas of magnesium alloys concerning technological applications and eco-friendly requirements. Each chapter brings us a new facet relating to the magnesium alloy application: magnesium alloys quasicrystals used to magnesium alloys reinforcement; rare earth metals as alloying components in magnesium implants for orthopaedic applications; magnesium alloys surface treatment by applying physical vapor deposition processes; casting magnesium alloys subjected to laser treatment; ductility enhancement on special magnesium alloys; welding and joining processing of magnesium alloys; transport application of magnesium and its alloys.
Download or read book Magnesium and Its Alloys written by Leszek A. Dobrzanski and published by CRC Press. This book was released on 2019-08-01 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium and Its Alloys: Technology and Applications covers a wide scope of topics related to magnesium science and engineering, from manufacturing and production to finishing and applications. This handbook contains thirteen chapters, each contributed by experts in their respective fields, and presents a broad spectrum of new information on pure magnesium, magnesium alloys, and magnesium matrix MgMCs composites. It covers such topics as computational thermodynamics, modern Mg-alloys with enhanced creep or fatigue properties, cutting-edge approaches to melt treating (grain refinement, micro-alloying, and the resulting solidification and growth), coatings, surface engineering, environmental protection (recycling and green energy storage and production), as well as biomedical applications. Aimed at researchers, professionals, and graduate students, the book conveys comprehensive and cutting-edge knowledge on magnesium alloys. It is especially useful to those in the fields of materials engineering, mechanical engineering, manufacturing engineering, and metallurgy.
Download or read book Corrosion of Magnesium Alloys written by G L Song and published by Woodhead Publishing. This book was released on 2011-03-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of magnesium alloys is increasing in a range of applications, and their popularity is growing wherever lightweight materials are needed. This book provides a comprehensive account of the corrosion of magnesium alloys. It covers not only the corrosion performances and mechanisms of Mg alloys in conventional environments, such as sodium chloride solutions, but also looks at their corrosion behaviours in special media, like engine coolants and simulated body fluids. Part one covers fundamentals such as the corrosion electrochemistry, activity and passivity of magnesium and its alloys. Part two then considers the metallurgical effect in relation to the corrosion of magnesium alloys, including the role of micro-structure and earth-rare elements, the corrosion behaviour of magnesium-based bulk metallic glasses, and the corrosion of innovative magnesium alloys. Part three goes on to describe environmental influences on the corrosion of magnesium alloys, such as atmospheric corrosion, stress corrosion cracking, creep and fatigue behaviour, and galvanic corrosion. Finally, part four is concerned with various means of protecting magnesium alloys against corrosion through the use of aluminium electrodeposition, conversion and electrophoretic coatings, and anodisation. With its distinguished editor and team of contributors, this book is an invaluable resource for metallurgists, engineers and designers working with magnesium and its alloys, as well as professionals in the aerospace and automotive industries.
