Download or read book Microstructural and Constitutive Behavior of Superplastic Titanium Alloy Ti 6Al 4V written by Craig Harold Johnson and published by . This book was released on 1994 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microstructural Evolution of Commercial Purity Ti and Superplasticity of Ti 6Al 4V Alloy Processed by Equal Channel Angular Extrusion written by and published by . This book was released on 2006 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project focused on deformation processing, microstructural development, and mechanical properties of Ti and Ti-6Al-4V alloys. Specific tasks included: (1) Study superplastic deformation of a Ti-6Al-4V alloy that have been processed by equal channel angular extrusion and relate the deformation mechanism to the enhancement of superplasticity, and (2) Examine the effect of strain path for Ti fabricated by equal channel angular extrusion and uniaxial compression, with a special focus on the improved mechanical properties of the deformed Ti. As a part of the report, two papers were published in Materials Science and Engineering A (vol. A410-411, 2005, 156-159) and Metallurgical and Materials Transactions A (vol.37, 2006, 381-391). The work was begun under AOARD 034023, "Microstructure development of ultrafine grained Ti and superplasticity of Ti-6Al-4V alloy." Most of that effort was devoted to Ti-6Al-4V alloy. Much progress has been made over the more than two years of effort. We propose to complete our studies by studying, in detail, deformation mechanisms for the enhanced superplasticity in the ultrafine grained Ti-6Al-4V alloy with a special focus on the role of non-equilibrium grain boundaries.
Download or read book Characterization of the Superplastic Behavior of the Two Phase Ti 6A1 4V Alloy written by Michael Lloyd Meier and published by . This book was released on 1986 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Superplastic Forming Diffusion Bonding Technology of Titanium Alloys written by Zhiqiang Li and published by Springer Nature. This book was released on 2023-10-26 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive illustration to the superplastic forming/diffusion bonding (SPF/DB) technology developed over decades of research on titanium alloys, process modeling, and its application. SPF/DB technology plays key roles in building aviation components with complicated structures, with highly beneficial effects when well designed. With the ever-increasing demand on components with multiple layers, there is an urgent need for an updated assessment of traditional and modern SPF/DB processing methods. Success critically depends on making the most practical and effective choice of SPF/DB method for a given application. The book introduces titanium and titanium alloys, SPF/DB processing and its modeling, and applications for building typical single or multiple layer(s) structures. Particular attention is paid to illustrating the microstructure evolution during SPF/DB processes. The information for making technical decisions about optimal choice of measurement and evaluation methods is also given in the book. Each chapter follows a focused and pragmatic format. Fully illustrated throughout, the book presents the state of the art in SPF/DB technology in a manner that makes it useful for engineers to improve the established forming processes and quality of components. This book is an essential reading material for industrial practitioners, academic researchers and postgraduates.
Download or read book Titanium Alloys at Elevated Temperature written by Mike R. Winstone and published by CRC Press. This book was released on 2001 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the fourth in a series of international conferences on the Microstructure of High Temperature Materials and the first to exclusively focus on the microstructure and properties of titanium alloys. Papers demonstrating the exploitation of these alloys in a wide range of commercial high temperature applications from the automotive to the aerospace industries were presented.
Download or read book Superplasticity in Advanced Materials ICSAM 2018 written by Goroh Itoh and published by Trans Tech Publications Ltd. This book was released on 2018-07-20 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes selected and peer reviewed papers presented at the 13th International Conference on Superplasticity in Advanced Materials (ICSAM 2018), August 19-22, 2018, St. Petersburg, Russia. We hope this collection will be interesting and useful for many specialists whose scientific and engineering activity is related to the area of superplastic materials, research of the mechanisms of superplasticity and superplastic processing technologies.
Download or read book Proceedings of the 13th World Conference on Titanium written by Vasisht Venkatesh and published by John Wiley & Sons. This book was released on 2016-04-26 with total page 4024 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the Proceedings of the 13th World Conference on Titanium.
Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.
Download or read book Understanding Flow Behavior and Microstructure Evolution During Thermomechanical Processing of Mill Annealed Ti 6Al 4V Titanium Alloy written by Jyoti S. Jha and published by . This book was released on 2018 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloy in the mill-annealed condition has a significant store of energy because it is not fully recrystallized and the grains possess a very high dislocation density. It is well established that the extent of softening mechanisms like dynamic recrystallization/recovery (DRX/DRV) are dependent on the stored energy during hot deformation. In this case, stored energy in the prior worked material may facilitate the softening. The hot deformation behavior of mill-annealed Ti-6Al-4V is studied by hot compression tests in the temperature range of 750C950C and strain rate (?, , ?, , , , , , ) range of 0.00110 s -1 for 60 % deformation. The true stress-strain curve of the compression tests exhibits the variation in flow stress ( ? ) characteristics in a wide range of temperature and strain rate (T, ,, ?, , ?, , , , , , ). The activation energy calculated from the phenomenological constitutive equation is significantly higher than the self-diffusion activation energy, which suggests DRX as the main softening process. However, ? -> ? phase transformation below the ? -transition temperature during hot deformation substantiates the occurrence of a mechanism other than DRX. In the lower temperature regime T (850C), softening is caused by the DRX process at a lower deformation rate ?, ?, , , , , (
Download or read book Micromechanics of Transformation Superplasticity in Ti 6Al 4V TiBw Composites written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Transformation superplasticity is a deformation mechanism induced by thermally-cycling a polymorphic material through the phase transformation range while simultaneously applying an external biasing stress. Unlike microstructural superplasticity, which requires a fine, equiaxed grain structure, this mechanism can be applied to coarse-grained alloys and composites. In this article, we review our research on transformation superplasticity of Ti-6Al-4V/TiB-whisker reinforced composites, during thermal cycling through the titanium [alpha]/[beta] transformation range. The composites exhibit Newtonian flow and superplastic extension under these conditions. We describe the constitutive behavior of composites containing 0, 5 and 10 vol% reinforcing whiskers, and consider the effects of load transfer from matrix to whisker on superplastic deformation using existing rheological models. Additionally, strain hardening due to gradual whisker alignment is observed, and rationalized in terms of increased load transfer for aligned whiskers.
Download or read book Titanium Alloys written by W Sha and published by Elsevier. This book was released on 2009-04-29 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given their growing importance in the aerospace, automotive, sports and medical sectors, modelling the microstructure and properties of titanium and its alloys is a vital part of research into the development of new applications. This is the first time a book has been dedicated to modelling techniques for titanium.Part one discusses experimental techniques such as microscopy, synchrotron radiation X-ray diffraction and differential scanning calorimetry. Part two reviews physical modelling methods including thermodynamic modelling, the Johnson-Mehl-Avrami method, finite element modelling, the phase-field method, the cellular automata method, crystallographic and fracture behaviour of titanium aluminide and atomistic simulations of interfaces and dislocations relevant to TiAl. Part three covers neural network models and Part four examines surface engineering products. These include surface nitriding: phase composition, microstructure, mechanical properties, morphology and corrosion; nitriding: modelling of hardness profiles and kinetics; and aluminising: fabrication of Ti coatings by mechanical alloying.With its distinguished authors, Titanium alloys: Modelling of microstructure, properties and applications is a standard reference for industry and researchers concerned with titanium modelling, as well as users of titanium, titanium alloys and titanium aluminide in the aerospace, automotive, sports and medical implant sectors. - Comprehensively assesses modelling techniques for titanium, including experimental techniques such as microscopy and differential scanning calorimetry - Reviews physical modelling methods including thermodynamic modelling and finite element modelling - Examines surface engineering products with specific chapters focused on surface nitriding and aluminising
Download or read book Flow Behavior and Microstructural Evolution During Superplastic Deformation of AA8090 Aluminum lithium Alloy written by Wenjie Fan and published by . This book was released on 1998 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microstructure and Mechanical Properties of Titanium Alloys written by Artur Shugurov and published by Mdpi AG. This book was released on 2021-10-26 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium and its alloys are widely used engineering materials within the aerospace, automotive, energy and chemical industries. Their unique combination of high strength-to-weight ratio, strong resistance to creep, excellent corrosion resistance, and low heat conductivity makes them suitable for a wide range of applications. A large variety of microstructures, including lamellar, martensite, equiaxed globular and bimodal (duplex) microstructures can be obtained in titanium alloys depending on the thermomechanical processing routes. Despite a large amount of work in the field of investigation of microstructure evolution and mechanical properties of titanium alloys, detailed studies of the effect of their microstructure on the mechanical behavior are still necessary because of ever-increasing demands for structural materials to optimize their properties for different applications by varying processing parameters and resulting microstructures. This Special Issue is focused on various aspects of microstructure evolution in titanium alloy samples obtained using traditional and additive technologies and subjected to different processing techniques as well as on the relation between their microstructure and mechanical behavior. The presented original articles cover the areas of preparation and experimental characterization of titanium alloys as well as computer simulation of their mechanical behavior under different loading conditions.
Download or read book Superplasticity of Alloys Intermetallides and Ceramics written by Oscar A. Kaibyshev and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superplasticity is shown to be a universal phenomenon in materials ranging from metals and intermetallics to ceramics. Superplastic deformation facilitates the production of materials with specifically chosen properties. This is illustrated using the examples of Mg-, Al-, and Ti-based commercial alloys, steels, and superalloys. Some of the strenghts of this book are: the broad range of materials studied, the reduction of scientific results to a form suitable for the practitioner, a profound physical analysis of the phenomenon, a new approach to superplastic treatment as a kind of strain-heat treatment, the presentation of new data on superplastic flow and on production techniques of micro- and submicrocrystalline structures.
Download or read book Superplasticity in Metals and Ceramics written by T. G. Nieh and published by Cambridge University Press. This book was released on 1997-01-23 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes advances in the field of superplasticity, the ability of certain materials to undergo very large tensile strains. This phenomenon has increasing commercial applications, but also presents a fascinating scientific challenge in attempts to understand the physical mechanisms that underpin it. The authors emphasize the materials aspects of superplasticity. Beginning with a brief history of the phenomenon, they describe the two major types of superplasticity-- fine-structure and internal-stress superplasticity-- and discuss their operative mechanisms. They also present microstructural factors controlling the ductility and fracture in superplastic materials. Observations of superplasticity in metals (including aluminum, magnesium, iron, titanium and nickel), ceramics (including monoliths and composites), intermetallics (including iron, nickel, and titanium base), and laminates are thoroughly described. This is a valuable text for graduate students and researchers in materials science and engineering.
Download or read book Superplastic Deformation Properties of Ti 6A1 4V written by M. A. Zaccone and published by . This book was released on 1990 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Superplasticity in Advanced Materials written by José María Cabrera Marrero and published by Materials Research Forum LLC. This book was released on 2023-09-01 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents practical and theoretical works on superplasticity in metals and ceramics, on deformation mechanisms, on processes to obtain large ultrafine-grained structures, on advanced characterization techniques, and on hot deformation of advanced materials. Key papers focus on (1) processing of metallic alloys for achieving exceptional superplastic properties, (2) high-pressure sliding (HPS) processes, (3) in-situ neutron and synchrotron methods, and (4) ultra-severe plastic deformation. Keywords: Superplasticity, Superfunctionality, High-pressure Sliding, High-pressure Torsion, Precise Forming, Numerical Simulation, Aeronautical Parts, Near-unconstrained Superplastic Parts, Low-temperature Superplasticity, Friction Stir Processing, Microstructure Evolution, Corrosion Properties, Duplex Stainless Steel, Grain Boundary Sliding, Laminated Materials, Asymmetric Hot Rolling, Uniaxial Hot Pressing, Diffusion Bonding.
