Download or read book Microrobotics and Microsystem Fabrication written by Armin Sulzmann and published by SPIE-International Society for Optical Engineering. This book was released on 1998 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mobile Microrobotics written by Metin Sitti and published by MIT Press. This book was released on 2017-06-16 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first textbook on micron-scale mobile robotics, introducing the fundamentals of design, analysis, fabrication, and control, and drawing on case studies of existing approaches. Progress in micro- and nano-scale science and technology has created a demand for new microsystems for high-impact applications in healthcare, biotechnology, manufacturing, and mobile sensor networks. The new robotics field of microrobotics has emerged to extend our interactions and explorations to sub-millimeter scales. This is the first textbook on micron-scale mobile robotics, introducing the fundamentals of design, analysis, fabrication, and control, and drawing on case studies of existing approaches. The book covers the scaling laws that can be used to determine the dominant forces and effects at the micron scale; models forces acting on microrobots, including surface forces, friction, and viscous drag; and describes such possible microfabrication techniques as photo-lithography, bulk micromachining, and deep reactive ion etching. It presents on-board and remote sensing methods, noting that remote sensors are currently more feasible; studies possible on-board microactuators; discusses self-propulsion methods that use self-generated local gradients and fields or biological cells in liquid environments; and describes remote microrobot actuation methods for use in limited spaces such as inside the human body. It covers possible on-board powering methods, indispensable in future medical and other applications; locomotion methods for robots on surfaces, in liquids, in air, and on fluid-air interfaces; and the challenges of microrobot localization and control, in particular multi-robot control methods for magnetic microrobots. Finally, the book addresses current and future applications, including noninvasive medical diagnosis and treatment, environmental remediation, and scientific tools.
Download or read book Microsystem Technology and Microrobotics written by Sergej Fatikow and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microsystem technology (MST) integrates very small (up to a few nanometers) mechanical, electronic, optical, and other components on a substrate to construct functional devices. These devices are used as intelligent sensors, actuators, and controllers for medical, automotive, household and many other purposes. This book is a basic introduction to MST for students, engineers, and scientists. It is the first of its kind to cover MST in its entirety. It gives a comprehensive treatment of all important parts of MST such as microfabrication technologies, microactuators, microsensors, development and testing of microsystems, and information processing in microsystems. It surveys products built to date and experimental products and gives a comprehensive view of all developments leading to MST devices and robots.
Download or read book Micromanufacturing Engineering and Technology written by Yi Qin and published by William Andrew. This book was released on 2010-07-02 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromanufacturing Engineering and Technology presents applicable knowledge of technology, equipment and applications, and the core economic issues of micromanufacturing for anyone with a basic understanding of manufacturing, material, or product engineering. It explains micro-engineering issues (design, systems, materials, market and industrial development), technologies, facilities, organization, competitiveness, and innovation with an analysis of future potential. The machining, forming, and joining of miniature / micro-products are all covered in depth, covering: grinding/milling, laser applications, and photo chemical etching; embossing (hot & UV), injection molding and forming (bulk, sheet, hydro, laser); mechanical assembly, laser joining, soldering, and packaging. - Presents case studies, material and design considerations, working principles, process configurations, and information on tools, equipment, parameters and control - Explains the many facets of recently emerging additive / hybrid technologies and systems, incl: photo-electric-forming, liga, surface treatment, and thin film fabrication - Outlines system engineering issues pertaining to handling, metrology, testing, integration and software - Explains widely used micro parts in bio / medical industry, information technology and automotive engineering - Covers technologies in high demand, such as: micro-mechanical-cutting, lasermachining, micro-forming, micro-EDM, micro-joining, photo-chemical-etching, photo-electro-forming, and micro-packaging
Download or read book Automated Nanohandling by Microrobots written by Sergej Fatikow and published by Springer Science & Business Media. This book was released on 2008 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to robot-based nanohandling. It presents work on the development of a versatile microrobot-based nanohandling robot station inside a scanning electron microscope (SEM). Those unfamiliar with the subject will find the text, which is complemented throughout by the extensive use of illustrations, clear and simple to understand. The author has published two books and numerous papers in the field, and holds more than 50 patents.
Download or read book Design and Manufacturing of Active Microsystems written by Stephanus Büttgenbach and published by Springer Science & Business Media. This book was released on 2011-03-04 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the design and manufacturing of microsystems as well as necessary key technologies developed within the Collaborative Research Center 516. The research efforts of this collaboration are focused on active micro systems which are based on the electromagnetic actuator principle. The travel of the investigated actuator systems is on the order of several millimeters. The total construction size of the actuator is on the range of several centimeters whereas essential structures being several micrometers. The methods and the production technologies that are investigated on the basis of various research models incorporate the fundamental process chains of microsystems.
Download or read book Precision Assembly Technologies for Mini and Micro Products written by Svetan Ratchev and published by Springer Science & Business Media. This book was released on 2006-01-19 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: These contributions to the 3rd IPAS'2006 seminar are grouped in 6 sections. Part 1 reviews new techniques for handling and feeding micro parts. Micro-robotics and robot applications for micro assembly are discussed in Part 2. An overview of different design and planning applications for microassembly is provided in Part 3. Part 4 covers reconfigurable and modular micro assembly systems and control applications. The economic aspects of microassembly including new business models are discussed in Part 5 while Part 6 presents specific technical solutions and microassembly applications.
Download or read book Microrobotics written by Yves Bellouard and published by CRC Press. This book was released on 2009-11-04 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: From conception to realization, Microrobotics: Methods and Applications covers all aspects of miniaturized systems that physically interact and manipulate objects at the microscale. It provides a solid understanding of this multidisciplinary field, which combines areas of materials science, mechanical engineering, and applied physics. Requiring no
Download or read book Micro Manufacturing Technologies and Their Applications written by Irene Fassi and published by Springer. This book was released on 2017-01-31 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in-depth theoretical and practical information on recent advances in micro-manufacturing technologies and processes, covering such topics as micro-injection moulding, micro-cutting, micro-EDM, micro-assembly, micro-additive manufacturing, moulded interconnected devices, and microscale metrology. It is designed to provide complementary material for the related e-learning platform on micro-manufacturing developed within the framework of the Leonardo da Vinci project 2013-3748/542424: MIMAN-T: Micro-Manufacturing Training System for SMEs. The book is mainly addressed to technicians and prospective professionals in the sector and will serve as an easily usable tool to facilitate the translation of micro-manufacturing technologies into tangible industrial benefits. Numerous examples are included to assist readers in learning and implementing the described technologies. In addition, an individual chapter is devoted to technological foresight, addressing market analysis and business models for micro-manufacturers.
Download or read book Microrobotics and Microassembly written by and published by . This book was released on 2001 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nano and Micro Electromechanical Systems written by Sergey Edward Lyshevski and published by CRC Press. This book was released on 2018-10-03 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Society is approaching and advancing nano- and microtechnology from various angles of science and engineering. The need for further fundamental, applied, and experimental research is matched by the demand for quality references that capture the multidisciplinary and multifaceted nature of the science. Presenting cutting-edge information that is applicable to many fields, Nano- and Micro-Electromechanical Systems: Fundamentals of Nano and Microengineering, Second Edition builds the theoretical foundation for understanding, modeling, controlling, simulating, and designing nano- and microsystems. The book focuses on the fundamentals of nano- and microengineering and nano- and microtechnology. It emphasizes the multidisciplinary principles of NEMS and MEMS and practical applications of the basic theory in engineering practice and technology development. Significantly revised to reflect both fundamental and technological aspects, this second edition introduces the concepts, methods, techniques, and technologies needed to solve a wide variety of problems related to high-performance nano- and microsystems. The book is written in a textbook style and now includes homework problems, examples, and reference lists in every chapter, as well as a separate solutions manual. It is designed to satisfy the growing demands of undergraduate and graduate students, researchers, and professionals in the fields of nano- and microengineering, and to enable them to contribute to the nanotechnology revolution.
Download or read book Robotics written by Oliver Brock and published by MIT Press. This book was released on 2009 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: State-of-the-art robotics research on such topics as manipulation, motion planning, micro-robotics, distributed systems, autonomous navigation, and mapping. Robotics: Science and Systems IV spans a wide spectrum of robotics, bringing together researchers working on the foundations of robotics, robotics applications, and analysis of robotics systems. This volume presents the proceedings of the fourth annual Robotics: Science and Systems conference, held in 2008 at the Swiss Federal Institute of Technology in Zurich. The papers presented cover a range of topics, including computer vision, mapping, terrain identification, distributed systems, localization, manipulation, collision avoidance, multibody dynamics, obstacle detection, microrobotic systems, pursuit-evasion, grasping and manipulation, tracking, spatial kinematics, machine learning, and sensor networks as well as such applications as autonomous driving and design of manipulators for use in functional-MRI. The conference and its proceedings reflect not only the tremendous growth of robotics as a discipline but also the desire in the robotics community for a flagship event at which the best of the research in the field can be presented.
Download or read book Capillary Forces in Microassembly written by Pierre Lambert and published by Springer Science & Business Media. This book was released on 2007-08-29 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Capillary Forces in Microassembly discusses the use of capillary forces as a gripping principle in microscale assembly. Clearly written and well-organized, this text brings together physical concepts at the microscale with practical applications in micromanipulation. Throughout this work, the reader will find a review of the existing gripping principles, elements to model capillary forces as well as descriptions of the simulation and experimental test bench developed to study the design parameters. Using well-known concepts from surface science (such as surface tension, capillary effects, wettability, and contact angles) as inputs to mechanical models, the amount of effort required to handle micro-components is then predicted. Researchers and engineers involved in micromanipulation and precision assembly will find this a highly useful reference for microassembly system design and analysis.
Download or read book Manufacturing Modelling Management and Control 2004 written by George Chryssolouris and published by Elsevier. This book was released on 2006-02-03 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micro and Nanomanipulation Tools written by Yu Sun and published by John Wiley & Sons. This book was released on 2015-08-24 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combining robotics with nanotechnology, this ready reference summarizes the fundamentals and emerging applications in this fascinating research field. This is the first book to introduce tools specifically designed and made for manipulating micro- and nanometer-sized objects, and presents such examples as semiconductor packaging and clinical diagnostics as well as surgery. The first part discusses various topics of on-chip and device-based micro- and nanomanipulation, including the use of acoustic, magnetic, optical or dielectrophoretic fields, while surface-driven and high-speed microfluidic manipulation for biophysical applications are also covered. In the second part of the book, the main focus is on microrobotic tools. Alongside magnetic micromanipulators, bacteria and untethered, chapters also discuss silicon nano- and integrated optical tweezers. The book closes with a number of chapters on nanomanipulation using AFM and nanocoils under optical and electron microscopes. Exciting images from the tiniest robotic systems at the nano-level are used to illustrate the examples throughout the work. A must-have book for readers with a background ranging from engineering to nanotechnology.
Download or read book Smart Materials Based Actuators at the Micro Nano Scale written by Micky Rakotondrabe and published by Springer Science & Business Media. This book was released on 2013-06-28 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Materials-Based Actuators at the Micro/Nano-Scale: Characterization, Control, and Applications gives a state of the art of emerging techniques to the characterization and control of actuators based on smart materials working at the micro/nano scale. The book aims to characterize some commonly used structures based on piezoelectric and electroactive polymeric actuators and also focuses on various and emerging techniques employed to control them. This book also includes two of the most emerging topics and applications: nanorobotics and cells micro/nano-manipulation.
Download or read book AMST 05 Advanced Manufacturing Systems and Technology written by Elso Kuljanic and published by Springer Science & Business Media. This book was released on 2007-03-23 with total page 791 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing a product is not difficult, the difficulty consists in manufacturing a product of high quality, at a low cost and rapidly. Drastic technological advances are changing global markets very rapidly. In such conditions the ability to compete successfully must be based on innovative ideas and new products which has to be of high quality yet low in price. One way to achieve these objecti ves would be through massive investments in research of computer based technology and by applying the approaches presented in this book. The First International Conference on Advanced Manufacturing Systems and Technology AMST87 was held in Opatija (Croatia) in October 1987. The Second International Conference on Advanced Manufacturing Systems and Technology AMSV90 was held in Trento (Italy) in lune 1990. The Third, Fourth, Fifth and Sixth Conferences on Advanced Manufacturing Systems and Technology were all held in Udine (Italy) as follows: AMST93 in April 1993, AMST96 in September 1996, AMST99 in June 1999 and AMST02 in June 2002.
