Download or read book MicroMechatronics written by Kenji Uchino and published by CRC Press. This book was released on 2003-04-25 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference reveals the most significant technologies, procedures, and trends in the design and application of actuator devices for micromechatronic systems. It addresses critical design and manufacturing concepts, as well as challenges in the modeling and regulation of electromechanical losses and heat generation in actuator devices. Accompanied by a CD-ROM demonstrating examples of finite-element modeling and previously developed and commercially available actuators, Micromechatronics provides insight into the future of this evolving field, and considers recent developments in micropositioning technology and displacement transducer, motor, and ultrasonic motor applications.
Download or read book Micromechatronics written by Victor Giurgiutiu and published by CRC Press. This book was released on 2016-04-19 with total page 948 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on recent developments in engineering science, enabling hardware, advanced technologies, and software, Micromechatronics: Modeling, Analysis, and Design with MATLAB, Second Edition provides clear, comprehensive coverage of mechatronic and electromechanical systems. It applies cornerstone fundamentals to the design of electromechanical syst
Download or read book MicroMechatronics Second Edition written by Kenji Uchino and published by CRC Press. This book was released on 2019-07-19 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: After Uchino’s introduction of a new terminology, ‘Micromechatronics’ in 1979 for describing the application area of ‘piezoelectric actuators’, the rapid advances in semiconductor chip technology have led to a new terminology MEMS (micro-electro-mechanical-system) or even NEMS (nano-electro-mechanicalsystem) to describe mainly thin film sensor/actuator devices, a narrower area of micromechatronics coverage. New technologies, product developments and commercialization are providing the necessity of this major revision. In particular, the progresses in high power transducers, loss mechanisms in smart materials, energy harvesting and computer simulations are significant. New technologies, product developments and commercialization are providing the updating requirement for the book contents, in parallel to the deletion of old contents. Various educational/instructional example problems have been accumulated, which were integrated in the new edition in order to facilitate the self-learning for the students, and the quiz/problem creation for the instructors. Heavily revised topics from the previous edition include: high power transducers, loss mechanisms in smart materials, energy harvesting and computer simulations New technologies, product developments and commercialization helped shape the updated contents of this book where all chapters have been updated and revised. This textbook is intended for graduate students and industrial engineers studying or working in the fields of electronic materials, control system engineering, optical communications, precision machinery, and robotics. The text is designed primarily for a graduate course with the equivalent of thirty 75-minute lectures; however, it is also suitable for self-study by individuals wishing to extend their knowledge in the field.
Download or read book FEM and Micromechatronics with ATILA Software written by Kenji Uchino and published by CRC Press. This book was released on 2018-10-03 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Students preparing to work with mechatronics, particularly with highly precise and smart actuators, face the challenge of designing and analyzing devices without formal and practical guidance in computer techniques. Finally there is a textbook that is as practical as it is authoritative: Kenji Uchino's FEM and Micromechatronics with ATILA Software. Ideal for Today's Computer-Based Curricula Every aspect of this book reflects its focus on being easy to use, easy to teach from, and above all, easy to implement. The first half of the text outlines the theory needed to develop and design smart actuators and transducers, while the second half walks students step-by-step through the software implementation using seven extensive examples. Even the book's lay-flat binding makes it easy for students to follow the text while working simultaneously at a computer. The companion CD-ROM supplies a free educational version of ATILA-Light. Unified Coverage for Integrated Technologies Covering the myriad challenges posed by smart transducers, the author introduces the fundamentals of piezoelectric and magnetostrictive devices, practical materials, device designs, drive and control techniques, and typical applications. Numerous problems and examples give students ample opportunity to put the concepts into practice. Outlining a complete treatment in 30 convenient 75 minute lessons, FEM and Micromechatronics with ATILA Software is a unique classroom text that students will continue to use throughout their entire careers.
Download or read book Case Studies in Micromechatronics written by Stephanus Büttgenbach and published by Springer Nature. This book was released on 2020-05-15 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book “Case Studies in Micromechatronics – From Systems to Process” offers prominent sample applications of micromechatronic systems and the enabling fabrication technologies. The chosen examples represent five main fields of application: consumer electronics (pressure sensor), mobility and navigation (acceleration sensor), handling technology and automation (micro gripper), laboratory diagnostics (point of care system), and biomedical technology (smart skin). These five sample systems are made from different materials requiring a large variety of modern fabrication methods and design rules, which are explained in detail. As a result, an inverted introduction “from prominent applications to base technologies” is provided. Examples of applications are selected to offer a broad overview of the development environment of micromechatronic systems including established as well as cutting-edge microfabrication technologies.
Download or read book Sensors Nanoscience Biomedical Engineering and Instruments written by Richard C. Dorf and published by CRC Press. This book was released on 2018-10-03 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: In two editions spanning more than a decade, The Electrical Engineering Handbook stands as the definitive reference to the multidisciplinary field of electrical engineering. Our knowledge continues to grow, and so does the Handbook. For the third edition, it has expanded into a set of six books carefully focused on a specialized area or field of study. Each book represents a concise yet definitive collection of key concepts, models, and equations in its respective domain, thoughtfully gathered for convenient access. Sensors, Nanoscience, Biomedical Engineering, and Instruments provides thorough coverage of sensors, materials and nanoscience, instruments and measurements, and biomedical systems and devices, including all of the basic information required to thoroughly understand each area. It explores the emerging fields of sensors, nanotechnologies, and biological effects. Each article includes defining terms, references, and sources of further information. Encompassing the work of the world’s foremost experts in their respective specialties, Sensors, Nanoscience, Biomedical Engineering, and Instruments features the latest developments, the broadest scope of coverage, and new material on multisensor data fusion and MEMS and NEMS.
Download or read book The Electrical Engineering Handbook Six Volume Set written by Richard C. Dorf and published by CRC Press. This book was released on 2018-12-14 with total page 3672 pages. Available in PDF, EPUB and Kindle. Book excerpt: In two editions spanning more than a decade, The Electrical Engineering Handbook stands as the definitive reference to the multidisciplinary field of electrical engineering. Our knowledge continues to grow, and so does the Handbook. For the third edition, it has grown into a set of six books carefully focused on specialized areas or fields of study. Each one represents a concise yet definitive collection of key concepts, models, and equations in its respective domain, thoughtfully gathered for convenient access. Combined, they constitute the most comprehensive, authoritative resource available. Circuits, Signals, and Speech and Image Processing presents all of the basic information related to electric circuits and components, analysis of circuits, the use of the Laplace transform, as well as signal, speech, and image processing using filters and algorithms. It also examines emerging areas such as text to speech synthesis, real-time processing, and embedded signal processing. Electronics, Power Electronics, Optoelectronics, Microwaves, Electromagnetics, and Radar delves into the fields of electronics, integrated circuits, power electronics, optoelectronics, electromagnetics, light waves, and radar, supplying all of the basic information required for a deep understanding of each area. It also devotes a section to electrical effects and devices and explores the emerging fields of microlithography and power electronics. Sensors, Nanoscience, Biomedical Engineering, and Instruments provides thorough coverage of sensors, materials and nanoscience, instruments and measurements, and biomedical systems and devices, including all of the basic information required to thoroughly understand each area. It explores the emerging fields of sensors, nanotechnologies, and biological effects. Broadcasting and Optical Communication Technology explores communications, information theory, and devices, covering all of the basic information needed for a thorough understanding of these areas. It also examines the emerging areas of adaptive estimation and optical communication. Computers, Software Engineering, and Digital Devices examines digital and logical devices, displays, testing, software, and computers, presenting the fundamental concepts needed to ensure a thorough understanding of each field. It treats the emerging fields of programmable logic, hardware description languages, and parallel computing in detail. Systems, Controls, Embedded Systems, Energy, and Machines explores in detail the fields of energy devices, machines, and systems as well as control systems. It provides all of the fundamental concepts needed for thorough, in-depth understanding of each area and devotes special attention to the emerging area of embedded systems. Encompassing the work of the world's foremost experts in their respective specialties, The Electrical Engineering Handbook, Third Edition remains the most convenient, reliable source of information available. This edition features the latest developments, the broadest scope of coverage, and new material on nanotechnologies, fuel cells, embedded systems, and biometrics. The engineering community has relied on the Handbook for more than twelve years, and it will continue to be a platform to launch the next wave of advancements. The Handbook's latest incarnation features a protective slipcase, which helps you stay organized without overwhelming your bookshelf. It is an attractive addition to any collection, and will help keep each volume of the Handbook as fresh as your latest research.
Download or read book Proceedings of the International Symposium on Micromechatronics and Human Science written by and published by . This book was released on 2003 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micro Nanosystems and Systems on Chips written by Alina Voda and published by John Wiley & Sons. This book was released on 2013-05-10 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro- and nanosystems represent an area of major scientific and technological opportunity and challenge, with actual and potential applications in almost all fields of human activity. The aim of this book is to present the central concepts of dynamic control systems (modeling, estimation, observation, identification, feedback control) and to show how they can be adapted and applied to the development of novel very small-scale systems and their associated human interfaces. The application fields presented here come from micro- and nano-robotics, biochips, near-field microscopy (AFM and STM) and nano-systems networks. Alina Voda has assembled contributions from leading experts at top research universities to produce the first overview of the major role that control systems science will play in the development of micro and nano-science and technologies.
Download or read book Micro Optomechatronics written by Hiroshi Hosaka and published by CRC Press. This book was released on 2004-12-15 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fusing developments in optics, electronics, and mechanics, this reference systematically explores and describes an abundance of micro-optomechatronic devices and applications. The authors outline the power and position control of a laser beam, as well as fundamental principles in optical technology. Contains examples of micro-optomechatronic
Download or read book Mems Nems written by Cornelius T. Leondes and published by Springer Science & Business Media. This book was released on 2007-10-08 with total page 2142 pages. Available in PDF, EPUB and Kindle. Book excerpt: This significant and uniquely comprehensive five-volume reference is a valuable source for research workers, practitioners, computer scientists, students, and technologists. It covers all of the major topics within the subject and offers a comprehensive treatment of MEMS design, fabrication techniques, and manufacturing methods. It also includes current medical applications of MEMS technology and provides applications of MEMS to opto-electronic devices. It is clearly written, self-contained, and accessible, with helpful standard features including an introduction, summary, extensive figures and design examples with comprehensive reference lists.
Download or read book Micro Mechanical Systems written by T. Fukuda and published by Elsevier. This book was released on 1998-07-24 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: In ten sections this book describes the principles and technology of Micro Mechanical Systems. Section one is a general introduction to the historical background and the parallels to microelectronics, reviewing the motivation for microsystems, and discussing microphysics and design and the evolution from microcomponents to microsystems. Section two covers the areas of photolithographic microfabrication, basic concepts of planar processing, materials, and processes. Section three looks at micromachining by machine tools, its history, basic principles and preparation methods. Section four discusses tribological aspects of microsystems. Section five covers fabrication, performance and examples of silicon microsensors. Section six looks at electric and magnetic micro-actuators for micro-robots. Section seven covers energy source and power supply methods. Section eight covers controlling principles and methods of micro mechanical systems and section nine gives examples of microsystems and micromachines. The final section discusses the future problems and outlook of micro mechanical systems.
Download or read book Control and Mechatronics written by Bodgan Wilamowski and published by CRC Press. This book was released on 2018-10-08 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industrial Electronics Handbook, Second Edition combines traditional and newer, more specialized knowledge that will help industrial electronics engineers develop practical solutions for the design and implementation of high-power applications. Embracing the broad technological scope of the field, this collection explores fundamental areas, including analog and digital circuits, electronics, electromagnetic machines, signal processing, and industrial control and communications systems. It also facilitates the use of intelligent systems—such as neural networks, fuzzy systems, and evolutionary methods—in terms of a hierarchical structure that makes factory control and supervision more efficient by addressing the needs of all production components. Enhancing its value, this fully updated collection presents research and global trends as published in the IEEE Transactions on Industrial Electronics Journal, one of the largest and most respected publications in the field. Control and Mechatronics presents concepts of control theory in a way that makes them easily understandable and practically useful for engineers or students working with control system applications. Focusing more on practical applications than on mathematics, this book avoids typical theorems and proofs and instead uses plain language and useful examples to: Concentrate on control system analysis and design, comparing various techniques Cover estimation, observation, and identification of the objects to be controlled—to ensure accurate system models before production Explore the various aspects of robotics and mechatronics Other volumes in the set: Fundamentals of Industrial Electronics Power Electronics and Motor Drives Industrial Communication Systems Intelligent Systems
Download or read book IEEE ASME International Conference on Advanced Intelligent Mechatronics Proceedings written by and published by . This book was released on 2005 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ICOM 2003 International Conference on Mechatronics written by R. M. Parkin and published by John Wiley & Sons. This book was released on 2003-08-01 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents the proceedings of a prestigious international conference organized by Loughborough University which will be of interest to all those involved in this rapidly advancing field, proving to be a vital read for all who wish to be well informed of developments and advances. Also included is a CD-ROM containing all the papers that were presented at the conference. The CD-ROM has been created using Adobe Acrobat Reader 5.0 with Search. Acrobat Reader is a unique software application that allows the user the opportunity to view, search, download, and print information electronically generated and produced in PDF format. It has extensive search facilities by author, subject, key-words, etc. Topics covered include: Fundamental Enabling Technologies Automatic Control of Mechatronic Systems Mechatronic Components Robotics and Automation Mobile robots Integrated Mechatronic Systems Biomedical Applications Mechatronics Education
Download or read book Human Friendly Mechatronics written by Masaharu Takano and published by Elsevier. This book was released on 2001-04-11 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book includes 61 selected papers from 106 presented at the second International Conference on Machine Automation (ICMA2000). The conference focused, for the first time, on human friendly mechantronics which covers machine systems interacting with human beings, psychological, physiological, and physical behaviors of the human being itself, robotics, human-mimetic mechanical systems, commercial application examples and so on. Machine automation has owed a lot to mechatronics technology in the last decades, however, a paradigm shift is desired and emphasized in the 21st century in every aspect of our society, and mechantronics is not an exception. The paradigm shift in mechatronics is a pursuit of productivity and efficiency to the preference of humans, and it is time that a new concept of a human friendly robot must be proposed that is welcome by human users. The book aims to offer the most up-to-date and valuable information on: •Human Interface & Communication •Human Support Technology •Actuator & Control •Vision & Sensing •Robotics and Design •Manufacturing System We believe this book will bring advanced knowledge and valuable information to the industries as well as to academics and will contribute to the further development in mechatronics and its related fields.
Download or read book Micro Nano Mechatronics written by Chikara Nagai and published by BoD – Books on Demand. This book was released on 2013-06-05 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro/Nano mechatronics is currently used in broader spectra, ranging from basic applications in robotics, actuators, sensors, semiconductors, automobiles, and machine tools. As a strategic technology highlighting the 21st century, this technology is extended to new applications in bio-medical systems and life science, construction machines, and aerospace equipment, welfare/human life engineering, and other brand new scopes. Basically, the miniaturizing technology is important to realize high performance, low energy consumption, low cost performance, small space instrumentation, light-weight, and so on. This book presents the summary of our project Center of Excellence for Education and Research of Micro-Nano Mechatronics. The project implements a strategy to realize applications of micro-nano mechatronics, which are based on mechanical engineering or materials science, control systems engineering, and advanced medical engineering. The chapters describe the research advances in micro/nano measurement and control, micro/nano design and manufacturing, nano materials science, and their applications in biomedical engineering. The publication of this book was supported by Nagoya University, the 21st COE program "Micro- and NanoMechatronics for Information-Based Society," and the global COE program “COE for Education and Research of Micro-Nano Mechatronics.”
