Download or read book Micromechanical Modeling and Simulation of Forming Processes written by Glavas, Vedran and published by KIT Scientific Publishing. This book was released on 2016-12-21 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: The deep drawing of an aluminum alloy used in the packaging industry for the beverage can manufacturing process is investigated. In this work, the effective constitutive behavior is based on a crystal plasticity model in combination with a non-linear Hashin-Shtrikman type homogenization scheme in which a reference stiffness controls the stress and strain fluctuations. The simulation results are compared to experiments in terms of deep drawing earing profiles, texture evolution, and localization.
Download or read book Micromechanical Modeling and Simulation of Forming Processes written by Vedran Glavas and published by . This book was released on 2020-10-09 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: The deep drawing of an aluminum alloy used in the packaging industry for the beverage can manufacturing process is investigated. In this work, the effective constitutive behavior is based on a crystal plasticity model in combination with a non-linear Hashin-Shtrikman type homogenization scheme in which a reference stiffness controls the stress and strain fluctuations. The simulation results are compared to experiments in terms of deep drawing earing profiles, texture evolution, and localization. This work was published by Saint Philip Street Press pursuant to a Creative Commons license permitting commercial use. All rights not granted by the work's license are retained by the author or authors.
Download or read book Microstructure generation and micromechanical modeling of sheet molding compound composites written by Görthofer, Johannes and published by KIT Scientific Publishing. This book was released on 2022-09-13 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wir präsentieren einen Algorithmus zur schnellen Erzeugung von SMC Mikrostrukturen hoher Güte, durch Verwendung einer exakten Schließung und eines quasi-zufälligen Samplings. Darüber hinaus stellen wir ein modulares Framework zur Modellierung anisotroper Schädigung vor. Unser Konzept der Extraktionstensoren und Schädigungsfunktionen ermöglicht die Beschreibung komplexer Vorgänge. Darüber hinaus schlagen wir einen ganzheitlichen Multiskalenansatz zur Bestimmung anisotroper Versagenskriterien vor. - We introduce an algorithm that allows for a fast generation of SMC composite microstructures. An exact closure approximation and a quasi-random orientation sampling ensure high fidelity. Furthermore, we present a modular framework for anisotropic damage evolution. Our concept of extraction tensors and damage-hardening functions enables the description of complex damage-degradation. In addition, we propose a holistic multiscale approach for constructing anisotropic failure criteria.
Download or read book Modelling and Simulation of Sheet Metal Forming Processes written by Marta C. Oliveira and published by MDPI. This book was released on 2020-04-22 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: The numerical simulation of sheet metal forming processes has become an indispensable tool for the design of components and their forming processes. This role was attained due to the huge impact in reducing time to market and the cost of developing new components in industries ranging from automotive to packing, as well as enabling an improved understanding of the deformation mechanisms and their interaction with process parameters. Despite being a consolidated tool, its potential for application continues to be discovered with the continuous need to simulate more complex processes, including the integration of the various processes involved in the production of a sheet metal component and the analysis of in-service behavior. The quest for more robust and sustainable processes has also changed its deterministic character into stochastic to be able to consider the scatter in mechanical properties induced by previous manufacturing processes. Faced with these challenges, this Special Issue presents scientific advances in the development of numerical tools that improve the prediction results for conventional forming process, enable the development of new forming processes, or contribute to the integration of several manufacturing processes, highlighting the growing multidisciplinary characteristic of this field.
Download or read book Thermomechanical Modeling and Experimental Characterization of Sheet Molding Compound Composites written by Lang, Juliane and published by KIT Scientific Publishing. This book was released on 2023-06-28 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this work is to model and experimentally characterize the anisotropic material behavior of SMC composites on the macroscale with consideration of the microstructure. Temperature-dependent thermoelastic behavior and failure behavior are modeled and the corresponding material properties are determined experimentally. Additionally, experimental biaxial damage investigations are performed. A parameter identification merges modeling and experiments and validates the models.
Download or read book Computational Plasticity in Powder Forming Processes written by Amir Khoei and published by Elsevier. This book was released on 2010-07-07 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: The powder forming process is an extremely effective method of manufacturing structural metal components with high-dimensional accuracy on a mass production basis. The process is applicable to nearly all industry sectors. It offers competitive engineering solutions in terms of technical performance and manufacturing costs. For these reasons, powder metallurgy is developing faster than other metal forming technology. Computational Plasticity in Powder Forming Proceses takes a specific look at the application of computer-aided engineering in modern powder forming technologies, with particular attention given to the Finite Element Method (FEM). FEM analysis provides detailed information on conditions within the processed material, which is often more complete than can be obtained even from elaborate physical experiments, and the numerical simulation makes it possible to examine a range of designs, or operating conditions economically.* Describes the mechanical behavior of powder materials using classical and modern constitutive theories.* Devoted to the application of adaptive FEM strategy in the analysis of powder forming processes.* 2D and 3D numerical modeling of powder forming processes are presented, using advanced plasticity models.
Download or read book Predictive Modeling of Dynamic Processes written by Stefan Hiermaier and published by Springer Science & Business Media. This book was released on 2009-07-09 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Predictive Modeling of Dynamic Processes provides an overview of hydrocode technology, applicable to a variety of industries and areas of engineering design. Covering automotive crash, blast impact, and hypervelocity impact phenomena, this volume offers readers an in-depth explanation of the fundamental code components. Chapters include informative introductions to each topic, and explain the specific requirements pertaining to each predictive hydrocode. Successfully blending crash simulation, hydrocode technology and impact engineering, this volume fills a gap in the current competing literature available.
Download or read book Mechanics Modeling of Sheet Metal Forming written by Jwo Pan and published by SAE International. This book was released on 2007-04-10 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functioning as an introduction to modern mechanics principles and various applications that deal with the science, mathematics and technical aspects of sheet metal forming, Mechanics Modeling of Sheet Metal Forming details theoretically sound formulations based on principles of continuum mechanics for finite or large deformation, which can then be implemented into simulation codes. The forming processes of complex panels by computer codes, in addition to extensive practical examples, are recreated throughout the many chapters of this book in order to benefit practicing engineers by helping them better understand the output of simulation software.
Download or read book Metal Forming 2024 written by Danuta Szeliga and published by Materials Research Forum LLC. This book was released on 2024-09-15 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers a great range of topics, including (1) Incremental forming and metal forming of 3D printed materials; (2) numerical modeling of processes and systems; (3) material characterization techniques for predicting microstructure evolution and mechanical properties during or after thermomechanical processing; (4) constitutive and numerical modeling, as well as process and system optimization. The materials covered include metal powders, lightweight systems, advanced high-strength steels, multiphase materials, and high-entropy alloys.
Download or read book Micromanufacturing Engineering and Technology written by Yi Qin and published by William Andrew. This book was released on 2015-05-08 with total page 859 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromanufacturing Engineering and Technology, Second Edition, covers the major topics of micro-manufacturing. The book not only covers theory and manufacturing processes, but it uniquely focuses on a broader range of practical aspects of micro-manufacturing engineering and utilization by also covering materials, tools and equipment, manufacturing system issues, control aspects and case studies. By explaining material selection, design considerations and economic aspects, the book empowers engineers in choosing among competing technologies. With a focus on low-cost and high-volume micro-manufacturing processes, the updated title covers technologies such as micro-mechanical-cutting, laser-machining, micro-forming, micro-EDM, micro-ECM, hot-embossing, micro-injection molding, laser micro-sintering, thin film fabrication, inkjet technology, micro-joining, multiple processes machines, and more. Edited by one of the few world-experts in this relatively new, but rapidly-expanding area and presenting chapters written by a 40-strong team of leading industry specialists, this book is an invaluable source of information for engineers, R&D researchers and academics. - Covers key micro-manufacturing technologies, processes and equipment with high-volume production capabilities, enabling large companies as well as SMEs to introduce those technologies in production and business and reduce production costs - Outlines micro-manufacturing system engineering and practical issues pertaining to material, design, handling, metrology, inspection, testing, sensors, control, system integration and software, and micro-factories - Enables manufacturing practitioners to choose the right technology suitable for a particular product-manufacture
Download or read book Advanced Computational Materials Modeling written by Miguel Vaz Junior and published by John Wiley & Sons. This book was released on 2011-09-22 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its discussion of strategies for modeling complex materials using new numerical techniques, mainly those based on the finite element method, this monograph covers a range of topics including computational plasticity, multi-scale formulations, optimization and parameter identification, damage mechanics and nonlinear finite elements.
Download or read book The Current State of the Art on Material Forming written by Ricardo Alves de Sousa and published by Trans Tech Publications Ltd. This book was released on 2013-06-13 with total page 2529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical and Experimental Approaches at Different Length-Scales, ESAFORM 2013 Selected, peer reviewed papers from the 16th ESAFORM Conference on Material Forming, April 22-24, 2013, Aveiro, Portugal
Download or read book Proceedings of the Summer School Graduate School 1483 Process Chains in Production Interaction Modelling and Assessment of Process Zones KIT Scientific Reports 7611 written by Rüdiger Pabst and published by KIT Scientific Publishing. This book was released on 2012 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Modeling of Mechanical Systems VI written by Mnaouar Chouchane and published by Springer Nature. This book was released on with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiscale Modelling in Sheet Metal Forming written by Dorel Banabic and published by Springer. This book was released on 2016-10-20 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a unified presentation of the research performed in the field of multiscale modelling in sheet metal forming over the course of more than thirty years by the members of six teams from internationally acclaimed universities. The first chapter is devoted to the presentation of some recent phenomenological yield criteria (BBC 2005 and BBC 2008) developed at the CERTETA center from the Technical University of Cluj-Napoca. An overview on the crystallographic texture and plastic anisotropy is presented in Chapter 2. Chapter 3 is dedicated to multiscale modelling of plastic anisotropy. The authors describe a new hierarchical multi-scale framework that allows taking into account the evolution of plastic anisotropy during sheet forming processes. Chapter 4 is focused on modelling the evolution of voids in porous metals with applications to forming limit curves and ductile fracture. The chapter details the steps needed for the development of dissipation functions and Gurson-type models for non-quadratic anisotropic plasticity criteria like BBC 2005 and those based on linear transformations. Chapter 5 describes advanced models for the prediction of forming limit curves developed by the authors. Chapter 6 is devoted to anisotropic damage in elasto-plastic materials with structural defects. Finally, Chapter 7 deals with modelling of the Portevin-Le Chatelier (PLC) effect. This volume contains contributions from leading researchers from the Technical University of Cluj-Napoca, Romania, the Catholic University of Leuven, Belgium, Clausthal University of Technology, Germany, Amirkabir University of Technology, Iran, the University of Bucharest, Romania, and the Institute of Mathematics of the Romanian Academy, Romania. It will prove useful to postgraduate students, researchers and engineers who are interested in the mechanical modeling and numerical simulation of sheet metal forming processes.
Download or read book Proceedings of the American Society for Composites Seventeenth Technical Conference written by C. T. Sun and published by CRC Press. This book was released on 2002-10-24 with total page 1685 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Material Forming written by Francisco Chinesta and published by Springer Science & Business Media. This book was released on 2007-04-19 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book groups the main advances in material forming, considering different processes, both conventional and non-conventional. It focuses on polymers, composites and metals, which are analyzed from the state of the art. Special emphasis is devoted to the contributions of the European Scientific Association for Material Forming (ESAFORM) during the last decade and in particular the ones coming from its annual international conference.
