Download or read book Micromachined Devices and Components written by and published by . This book was released on 2000 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micromachined Circuits and Devices written by Shiban Kishen Koul and published by Springer Nature. This book was released on 2022-02-07 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the design of different switching and resonant devices using the present state-of-the-art radio frequency (RF) micromachining (MEMS) technology. Different topologies of MEMS switches have been discussed considering optimum performances over microwave to millimeter wave frequency range. Wide varieties of micromachined switching networks starting from single-pole-double-throw (SPDT) to single-pole-fourteen-throw (SP14T) are discussed utilizing vertical and lateral actuation movements of the switch. Different transduction mechanisms of micromachined resonators are highlighted that includes capacitive, piezoelectric, and piezoresistive types. The book provides major design guidelines for the development of MEMS-based digital phase shifters, tunable filters, and antennas with extensive measurement data. Apart from the radio frequency (RF) requirements, an extensive guideline is given for the improvement of the reliability of micromachined switches and digital phase shifters where multiple switches are operating simultaneously. It takes multiple iterations and extensive characterizations to conclude with a reliable MEMS digital phase shifter, and these aspects are given one of the prime attentions in this book. Detailed performance analysis of metamaterial inspired MEMS switches is then discussed for application in millimeter wave frequency bands up to about 170 GHz. The book concludes with future research activities of RF MEMS technology and its potential in space, defense, sensors, and biomedical applications.
Download or read book Optomechatronic Micro nano Devices and Components written by and published by . This book was released on 2006 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micromachining written by and published by BoD – Books on Demand. This book was released on 2024-05-29 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this volume, Micromachining - New Trends and Applications, researchers from distant parts of the world have combined efforts and contributed their ideas and research work on micromachining. Their chapters will give you the opportunity to learn about materials, techniques, applications, challenges, and recent advancements in micromachining technology as well as about the state of the current micromachining market. Chapters also discuss concepts of micro-scale electronic component manufacturing, advancements in micromachining techniques of micro-electromechanical system (MEMS) piezoresistive pressure sensors to minimize offset drift due to humidity and temperature, the principles and classifications of force measuring systems with zero-compliance suspension, and triangular microcavity fabrication using micro-electrical discharge machining.
Download or read book Micro Total Analysis Systems 98 written by D. Jed Harrison and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-TAS '98 is the third of a series of symposia initiated by MBSA (University of Twente) in 1994, on the subject of miniaturizing, and integrating within a monolithic structure, the chemical, biochemical and biological procedures commonly used for analysis and synthesis. The primary tool used to develop micro-total analysis systems (mu- TAS) has been micro-photolithographic patterning and micromachining. These powerful tools of Micro System Technology (MST or MEMS) have been applied in highly imaginative ways to develop microchip chemical arrays, fully integrated pump and fluid manifolds, and electrokinetically driven micro-channel systems to be used for genetic analysis, clinical diagnostics and environmental monitoring, and to integrate reactions as diverse as the polymerase chain reaction (PCR) and the large volume, partial oxidation of ammonia. This text illustrates the rapid expansion of the field, the extensive industrial involvement, the increasing number of participating researchers, the expanding range of concepts and applications that utilize MST and microfluidic devices, and new MST-compatible plastic micro-machining to meet the needs of the life science community. This volume contains the proceedings of the Third International Symposium on Micro-Total Analysis Systems, mu-TAS '98, held on October 13-16 in Banff, Alberta, Canada. State-of-the-art invited and contributed papers presented by the world's leading mu- TAS research groups provide a highly informative picture of the growth since 1994 and of the promising future of this exciting and rapidly growing field.
Download or read book MEMS based Integrated Navigation written by Priyanka Aggarwal and published by Artech House. This book was released on 2010 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their micro-scale size and low power consumption, Microelectromechanical systems (MEMS) are now being utilized in a variety of fields. This leading-edge resource focuses on the application of MEMS inertial sensors to navigation systems. The book shows you how to minimize cost by adding and removing inertial sensors. Moreover, this practical reference provides you with various integration strategies with examples from real field tests. From an introduction to MEMS navigation related applicationsOC to special topics on Alignment for MEMS-Based NavigationOC to discussions on the Extended Kalman Filter, this comprehensive book covers a wide range of critical topics in this fast-growing area."
Download or read book Microfabricated Systems and MEMS written by and published by . This book was released on 2000 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microfabricated Systems and MEMS V written by and published by The Electrochemical Society. This book was released on 2000 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mems Nems written by Cornelius T. Leondes and published by Springer Science & Business Media. This book was released on 2007-10-08 with total page 2142 pages. Available in PDF, EPUB and Kindle. Book excerpt: This significant and uniquely comprehensive five-volume reference is a valuable source for research workers, practitioners, computer scientists, students, and technologists. It covers all of the major topics within the subject and offers a comprehensive treatment of MEMS design, fabrication techniques, and manufacturing methods. It also includes current medical applications of MEMS technology and provides applications of MEMS to opto-electronic devices. It is clearly written, self-contained, and accessible, with helpful standard features including an introduction, summary, extensive figures and design examples with comprehensive reference lists.
Download or read book Electro Micromachining and Microfabrication written by Sandip Kunar and published by CRC Press. This book was released on 2024-04-09 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridging the gap between the need for micro elements and the profitable microfabrication of goods, this new book provides an informative overview of the electro-micromachining and microfabrication processes, varieties, and important applications. Opening with an overview of a variety of micromachining technologies, with an emphasis on nontraditional approaches and recent advances in each, the volume discusses the ultrasonic micromachining processes for producing a variety of micro-shapes, such as micro-holes, micro-slots, and micro-walls, as well as assisted hybrid micromachining with ultrasonic vibration of the tool or workpiece, all which help to improve precision and to advance research. Computer-aided design and computer-aided manufacturing dental micromachining technologies are discussed. Micro-electrical discharge machining, laser micro grooving, and laser micromachining are among the advanced micro-manufacturing processes addressed as well. The volume also covers the use of an electrochemical micromachining method to improve micro texturing and the use of nano-additives to enhance MQL and micromachining process optimization.
Download or read book Micro Total Analysis Systems 2001 written by J. Michael Ramsey and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fifth International Conference on Micro Total Analysis Systems, also known as JlTAS 2001, will highlight the latest exciting events in the world ofminiaturized devices and systems for performing chemical and biochemical experimentation This conference has become mandatory for those of us working in this field as it is indeed helping to define our discipline. We are grateful to the people of the MESA Research Institute of the University of Twente, particularly Piet Bergveld and Albert van den Berg, for starting this meeting in 1994. Their original intention was for the JlTAS meeting to be a small informal workshop. This workshop flavor was sustained through the second meeting held in Basel in 1996, but already in 1998 at the third meeting in Banff it was clear that the "workshop" had become a conference with 420 attendees. It was due to this clearly growing interest in microchemical systems that it was decided we should consider gradually moving toward an annual format and prepare for the possibility that the meeting would increase in popularity. Albert van den Berg was still yearning for a workshop at the JlTAS 2000 meeting and planned a single session format. Again there was a large increase in submitted abstracts (more than 230 total) and a further increase in attendance. The JlTAS steering committee again agreed that we would have to prepare to address the demand the meeting was receiving.
Download or read book Shape and Functional Elements of the Bulk Silicon Microtechnique written by Joachim Frühauf and published by Springer Science & Business Media. This book was released on 2005-12-05 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This methodic manual presents a survey of the form-related and functional elements of the bulk silicon microtechnique. It gives a systematic description of simple shape elements and of elements for mechanical, fluidic and optical applications. This manual includes practical instructions for the use of the relevant techniques and an extensive collection of examples for the support of the search for applications via photographs, drawings and references. It serves as a valuable guide to the design of etch masks and processes while summarizing the important properties of silicon, especially aiming at producers of sensors and microtechnical components, as well as producers of components of precision engineering and optical applications.
Download or read book Femtosecond Laser 3D Micromachining for Microfluidic and Optofluidic Applications written by Koji Sugioka and published by Springer Science & Business Media. This book was released on 2013-09-24 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: Femtosecond lasers opened up new avenue in materials processing due to its unique features of ultrashort pulse width and extremely high peak intensity. One of the most important features of femtosecond laser processing is that strong absorption can be induced even by materials which are transparent to the femtosecond laser beam due to nonlinear multiphoton absorption. The multiphoton absorption allows us to perform not only surface but also three-dimensionally internal microfabrication of transparent materials such as glass. This capability makes it possible to directly fabricate three-dimensional microfluidics, micromechanics, microelectronics and microoptics embedded in the glass. Further, these microcomponents can be easily integrated in a single glass microchip by the simple procedure using the femtosecond laser. Thus, the femtosecond laser processing provides some advantages over conventional methods such as traditional semiconductor processing or soft lithography for fabrication of microfluidic, optofludic and lab-on-a-chip devices and thereby many researches on this topic are currently being carried out. This book presents a comprehensive review on the state of the art and future prospects of femtosecond laser processing for fabrication of microfluidics and optofludics including principle of femtosecond laser processing, detailed fabrication procedures of each microcomponent and practical applications to biochemical analysis.
Download or read book The Electrical Engineering Handbook written by Wai Kai Chen and published by Elsevier. This book was released on 2004-11-16 with total page 1227 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Electrical Engineer's Handbook is an invaluable reference source for all practicing electrical engineers and students. Encompassing 79 chapters, this book is intended to enlighten and refresh knowledge of the practicing engineer or to help educate engineering students. This text will most likely be the engineer's first choice in looking for a solution; extensive, complete references to other sources are provided throughout. No other book has the breadth and depth of coverage available here. This is a must-have for all practitioners and students! The Electrical Engineer's Handbook provides the most up-to-date information in: Circuits and Networks, Electric Power Systems, Electronics, Computer-Aided Design and Optimization, VLSI Systems, Signal Processing, Digital Systems and Computer Engineering, Digital Communication and Communication Networks, Electromagnetics and Control and Systems.About the Editor-in-Chief...Wai-Kai Chen is Professor and Head Emeritus of the Department of Electrical Engineering and Computer Science at the University of Illinois at Chicago. He has extensive experience in education and industry and is very active professionally in the fields of circuits and systems. He was Editor-in-Chief of the IEEE Transactions on Circuits and Systems, Series I and II, President of the IEEE Circuits and Systems Society and is the Founding Editor and Editor-in-Chief of the Journal of Circuits, Systems and Computers. He is the recipient of the Golden Jubilee Medal, the Education Award, and the Meritorious Service Award from the IEEE Circuits and Systems Society, and the Third Millennium Medal from the IEEE. Professor Chen is a fellow of the IEEE and the American Association for the Advancement of Science.* 77 chapters encompass the entire field of electrical engineering.* THOUSANDS of valuable figures, tables, formulas, and definitions.* Extensive bibliographic references.
Download or read book An Introduction to Surface Micromachining written by Robert W. Johnstone and published by Springer Science & Business Media. This book was released on 2004-06-03 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Surface-Micromachining provides for the first time a unified view of surface-micromachining. Building up from the basic building block of microfabrication techniques, to the general surface-micromachining design, it will finish with the theory and design of concrete components. An Introduction to Surface-Micromachining connects the manufacturing process, microscale phenomena, and design data to physical form and function. This book will be of interest to mechanical engineers looking to scale down into micromachining and microelectronics designers looking to move horizontally to micromachining.
Download or read book Comprehensive Structural Integrity written by Ian Milne and published by Elsevier. This book was released on 2003-07-25 with total page 4647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this major reference work is to provide a first point of entry to the literature for the researchers in any field relating to structural integrity in the form of a definitive research/reference tool which links the various sub-disciplines that comprise the whole of structural integrity. Special emphasis will be given to the interaction between mechanics and materials and structural integrity applications. Because of the interdisciplinary and applied nature of the work, it will be of interest to mechanical engineers and materials scientists from both academic and industrial backgrounds including bioengineering, interface engineering and nanotechnology. The scope of this work encompasses, but is not restricted to: fracture mechanics, fatigue, creep, materials, dynamics, environmental degradation, numerical methods, failure mechanisms and damage mechanics, interfacial fracture and nano-technology, structural analysis, surface behaviour and heart valves. The structures under consideration include: pressure vessels and piping, off-shore structures, gas installations and pipelines, chemical plants, aircraft, railways, bridges, plates and shells, electronic circuits, interfaces, nanotechnology, artificial organs, biomaterial prostheses, cast structures, mining... and more. Case studies will form an integral part of the work.
Download or read book Micro Total Analysis Systems 2000 written by Albert van den Berg and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the fourth international symposium on Micro Total Analysis Systems (muTAS 2000). Cutting-edge research of all invited and contributed papers presented by the world’s leading muTAS groups provides the state of the art of this electrifying, multidisciplinary field.
