Download or read book 3D Bioprinting and Nanotechnology in Tissue Engineering and Regenerative Medicine written by Lijie Grace Zhang and published by Academic Press. This book was released on 2015-01-14 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Bioprinting and Nanotechnology in Tissue Engineering provides an in depth introduction to these two technologies and their industrial applications. Stem cells in tissue regeneration are covered, along with nanobiomaterials. Commercialization, legal and regulatory considerations are also discussed in order to help you translate nanotechnology and 3D printing-based products to the marketplace and the clinic. Dr. Zhang's and Dr. Fishers' team of expert contributors have pooled their expertise in order to provide a summary of the suitability, sustainability and limitations of each technique for each specific application. The increasing availability and decreasing costs of nanotechnologies and 3D printing technologies are driving their use to meet medical needs, and this book provides an overview of these technologies and their integration. It shows how nanotechnology can increase the clinical efficiency of prosthesis or artificial tissues made by bioprinting or biofabrication. Students and professionals will receive a balanced assessment of relevant technology with theoretical foundation, while still learning about the newest printing techniques. - Includes clinical applications, regulatory hurdles, and risk-benefit analysis of each technology. - This book will assist you in selecting the best materials and identifying the right parameters for printing, plus incorporate cells and biologically active agents into a printed structure - Learn the advantages of integrating 3D printing and nanotechnology in order to improve the safety of your nano-scale materials for biomedical applications

Download or read book Stem Cell Biology and Tissue Engineering in Dental Sciences written by Ajaykumar Vishwakarma and published by Academic Press. This book was released on 2014-11-05 with total page 933 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stem Cell Biology and Tissue Engineering in Dental Sciences bridges the gap left by many tissue engineering and stem cell biology titles to highlight the significance of translational research in this field in the medical sciences. It compiles basic developmental biology with keen focus on cell and matrix biology, stem cells with relevance to tissue engineering biomaterials including nanotechnology and current applications in various disciplines of dental sciences; viz., periodontology, endodontics, oral & craniofacial surgery, dental implantology, orthodontics & dentofacial orthopedics, organ engineering and transplant medicine. In addition, it covers research ethics, laws and industrial pitfalls that are of particular importance for the future production of tissue constructs. Tissue Engineering is an interdisciplinary field of biomedical research, which combines life, engineering and materials sciences, to progress the maintenance, repair and replacement of diseased and damaged tissues. This ever-emerging area of research applies an understanding of normal tissue physiology to develop novel biomaterial, acellular and cell-based technologies for clinical and non-clinical applications. As evident in numerous medical disciplines, tissue engineering strategies are now being increasingly developed and evaluated as potential routine therapies for oral and craniofacial tissue repair and regeneration. - Diligently covers all the aspects related to stem cell biology and tissue engineering in dental sciences: basic science, research, clinical application and commercialization - Provides detailed descriptions of new, modern technologies, fabrication techniques employed in the fields of stem cells, biomaterials and tissue engineering research including details of latest advances in nanotechnology - Includes a description of stem cell biology with details focused on oral and craniofacial stem cells and their potential research application throughout medicine - Print book is available and black and white, and the ebook is in full color

Download or read book Bio Materials and Prototyping Applications in Medicine written by Paulo Jorge Bártolo and published by Springer Science & Business Media. This book was released on 2007-12-03 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid prototyping is used to design and develop medical devices and instrumentation. This book details research in rapid prototyping of bio-materials for medical applications. It provides a wide variety of examples of medical applications using rapid prototyping, including tissue engineering, dental applications, and bone replacement. Coverage also discusses the emergence of computer aided design in the development of prosthetic devices.

Download or read book Handbook of Stem Cells written by Anthony Atala and published by Academic Press. This book was released on 2012-12-31 with total page 1076 pages. Available in PDF, EPUB and Kindle. Book excerpt: New discoveries in the field of stem cells increasingly dominate the news and scientific literature revealing an avalanche of new knowledge and research tools that are producing therapies for cancer, heart disease, diabetes, and a wide variety of other diseases that afflict humanity. The Handbook of Stem Cells integrates this exciting area of life science, combining in two volumes the requisites for a general understanding of adult and embryonic stem cells. Organized in two volumes entitled Pluripotent Stem Cells and Cell Biology and Adult and Fetal Stem Cells, this work contains contributions from the world's experts in stem cell research to provide a description of the tools, methods, and experimental protocols needed to study and characterize stem cells and progenitor populations as well as a the latest information of what is known about each specific organ system. - Provides comprehensive coverage on this highly topical subject - Contains contributions by the foremost authorities and premiere names in the field of stem cell research - Companion website - http://booksite.elsevier.com/9780123859426/ - contains over 250 color figures in presentation format

Download or read book Virtual Prototyping Bio Manufacturing in Medical Applications written by Bopaya Bidanda and published by Springer Nature. This book was released on 2020-10-21 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: The original role of RP was to confirm the shape and feel of concept design, but innovations in RP now allow for the development of sophisticated medical devices such as catheters, stents, drug delivery systems, syringes and cardio-vascular devices, and more. RP has moved beyond medical devices, as surgeons now regularly use RP models to brainstorm strategies for surgeries. This book presents new uses for rapid prototyping in state-of-the-art medical applications.

Download or read book Biomaterials for Stem Cell Therapy written by Loredana De Bartolo and published by CRC Press. This book was released on 2013-01-28 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focused on stem cell applications, this book bridges the fields of biomaterials, offering new insights into constructing and regenerating tissues and organs. Its unique feature is linking diseases of the human body to current thinking on how to deal with them in the context of current concepts and technologies by means of an in-depth focus on biomaterials. The book assembles recent advances and covers a range of topics related to stem cell biology, biomaterials and technological approaches such as bioreactors written by top researchers in the field. Stem cells of both embryonic and adult origin are discussed with applications ranging, but not limited to, nerve regeneration, liver, pancreas, skin, trachea, cartilage and bone repair and cardiovascular therapy. Developments in the field reflecting the design and construction of the human body and its principal anatomy are discussed from a materials point of view. The book will be a valuable tool for biomaterial scientists, tissue engineers, clinicians as well as stem cell biologists involved in basic research and applications of adult and embryonic stem cells. It will also be a source of reference for students in biotechnology, biomedical engineering, biology, biochemistry, materials sciences, pharmaceuticals, and veterinary and human medicine.

Download or read book Bioinspired Biomaterials written by Heung Jae Chun and published by Springer Nature. This book was released on 2020-06-29 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first of two volumes that together offer a comprehensive account of cutting-edge advances in the development of biomaterials for use within tissue engineering and regenerative medicine. Topics addressed in this volume, which is devoted to bioinspired biomaterials, range from novel biomaterials for regenerative medicine through to emerging enabling technologies with applications in, for example, drug delivery, maternal–fetal medicine, peripheral nerve repair and regeneration, and brain tumor therapy. New bioinspired hydrogels receive detailed attention in the book, and a further focus is the use of bioinspired biomaterials in the regulation of stem cell fate. Here the coverage includes the role of scaffolds in cartilage regeneration, the bioapplication of inorganic nanomaterials in tissue engineering, and guidance of cell migration to improve tissue regeneration. The authors are recognized experts in the interdisciplinary field of regenerative medicine and the book will be of value for all with an interest in regenerative medicine based on biomaterials.

Download or read book Soft Robotics written by and published by Academic Press. This book was released on 2021-07-07 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soft Robotics aims at providing state of art on research and potential approaches of soft robotics. It particularly challenges the traditional thinking of engineers, as the confluence of technologies, ranging from new materials, sensors, actuators and production techniques to new design tools, will make it possible to create new systems whose structures are almost completely made of soft materials, which bring about entirely new functions and behaviors, similar in many ways to natural systems. This is a huge research topic, "hot and with a huge potential due to new possibilities offered by these systems to cope with problems that cannot be addressed by robots built from rigid bodies. - Chemical engineering can take part to the emerging field of soft robotics - Soft and polymer materials can be used in sensing applications - Soft robotics can solve many industrial issues and challenges

Download or read book Biomaterials written by Joyce Y. Wong and published by CRC Press. This book was released on 2012-12-06 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most current applications of biomaterials involve structural functions, even in those organs and systems that are not primarily structural in their nature, or very simple chemical or electrical functions. Complex chemical functions, such as those of the liver, and complex electrical or electrochemical functions, such as those of the brain and sense organs, cannot be carried out by biomaterials at this time. With these basic concepts in mind, Biomaterials: Principles and Practices focuses on biomaterials consisting of different materials such as metallic, ceramic, polymeric, and composite. It highlights the impact of recent advances in the area of nano- and microtechnology on biomaterial design. Discusses the biocompatibility of metallic implants and corrosion in an in vivo environment Provides a general overview of the relatively bioinert, bioactive or surface-reactive ceramics, and biodegradable or resorbable bioceramics Reviews the basic chemical and physical properties of synthetic polymers, the sterilization of the polymeric biomaterials, the importance of the surface treatment for improving biocompatibility, and the application of the chemogradient surface for the study on cell-to-polymer interactions Covers the fundamentals of composite materials and their applications in biomaterials Highlights commercially significant and successful biomedical biodegradable polymers Examines failure modes of different types of implants based on material, location, and function in the body The book discusses the role of biomaterials as governed by the interaction between the material and the body, specifically, the effect of the body environment on the material and the effect of the material on the body.

Download or read book The Biomedical Engineering Handbook written by Joseph D. Bronzino and published by CRC Press. This book was released on 2018-10-03 with total page 5245 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive bible for the field of biomedical engineering, this collection of volumes is a major reference for all practicing biomedical engineers and students. Now in its fourth edition, this work presents a substantial revision, with all sections updated to offer the latest research findings. New sections address drugs and devices, personalized medicine, and stem cell engineering. Also included is a historical overview as well as a special section on medical ethics. This set provides complete coverage of biomedical engineering fundamentals, medical devices and systems, computer applications in medicine, and molecular engineering.

Download or read book Biomedical Engineering Fundamentals written by Joseph D. Bronzino and published by CRC Press. This book was released on 2014-12-17 with total page 1144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Known as the bible of biomedical engineering, The Biomedical Engineering Handbook, Fourth Edition, sets the standard against which all other references of this nature are measured. As such, it has served as a major resource for both skilled professionals and novices to biomedical engineering.Biomedical Engineering Fundamentals, the first volume of

Download or read book Comprehensive Materials Processing written by and published by Newnes. This book was released on 2014-04-07 with total page 5485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources

Download or read book Dissertation Abstracts International written by and published by . This book was released on 2008 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanotechnology and Tissue Engineering written by Cato T. Laurencin and published by CRC Press. This book was released on 2008-06-16 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofabrication gives us the ability to mimic biological structures with molecular level precision. Offering a natural progression of topics, Nanotechnology and Tissue Engineering: The Scaffold provides a state-of-the-art account of groundbreaking research in this rapidly emerging area of biomedical engineering. Emphasizing the importance of scaffo

Download or read book Essentials of 3D Biofabrication and Translation written by Anthony Atala and published by Academic Press. This book was released on 2015-07-17 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essentials of 3D Biofabrication and Translation discusses the techniques that are making bioprinting a viable alternative in regenerative medicine. The book runs the gamut of topics related to the subject, including hydrogels and polymers, nanotechnology, toxicity testing, and drug screening platforms, also introducing current applications in the cardiac, skeletal, and nervous systems, and organ construction. Leaders in clinical medicine and translational science provide a global perspective of the transformative nature of this field, including the use of cells, biomaterials, and macromolecules to create basic building blocks of tissues and organs, all of which are driving the field of biofabrication to transform regenerative medicine. - Provides a new and versatile method to fabricating living tissue - Discusses future applications for 3D bioprinting technologies, including use in the cardiac, skeletal, and nervous systems, and organ construction - Describes current approaches and future challenges for translational science - Runs the gamut of topics related to the subject, from hydrogels and polymers to nanotechnology, toxicity testing, and drug screening platforms

Download or read book Comprehensive Biomaterials II written by Kevin Healy and published by Elsevier. This book was released on 2017-05-18 with total page 4865 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Biomaterials II, Second Edition, Seven Volume Set brings together the myriad facets of biomaterials into one expertly-written series of edited volumes. Articles address the current status of nearly all biomaterials in the field, their strengths and weaknesses, their future prospects, appropriate analytical methods and testing, device applications and performance, emerging candidate materials as competitors and disruptive technologies, research and development, regulatory management, commercial aspects, and applications, including medical applications. Detailed coverage is given to both new and emerging areas and the latest research in more traditional areas of the field. Particular attention is given to those areas in which major recent developments have taken place. This new edition, with 75% new or updated articles, will provide biomedical scientists in industry, government, academia, and research organizations with an accurate perspective on the field in a manner that is both accessible and thorough. Reviews the current status of nearly all biomaterials in the field by analyzing their strengths and weaknesses, performance, and future prospects Covers all significant emerging technologies in areas such as 3D printing of tissues, organs and scaffolds, cell encapsulation; multimodal delivery, cancer/vaccine - biomaterial applications, neural interface understanding, materials used for in situ imaging, and infection prevention and treatment Effectively describes the many modern aspects of biomaterials from basic science, to clinical applications

Download or read book 3D Printing and Biofabrication written by Aleksandr Ovsianikov and published by Springer. This book was released on 2018-06-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an in-depth introduction to 3D printing and biofabrication and covers the recent advances in additive manufacturing for tissue engineering. The book is divided into two parts, the first part on 3D printing discusses conventional approaches in additive manufacturing aimed at fabrication of structures, which are seeded with cells in a subsequent step. The second part on biofabrication presents processes which integrate living cells into the fabrication process.