Download or read book Microbial Contamination Control in Parenteral Manufacturing written by Kevin Williams and published by CRC Press. This book was released on 2004-05-20 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference surveys emerging trends, concepts, and procedures used in the characterization and control of contaminants; the sterile production of traditional drugs and biologics; the design, construction, and validation of new parenteral facilities; and the monitoring of clean environments-vividly illustrating the routes by which products, proce
Download or read book Microbial Contamination Control in the Pharmaceutical Industry written by Luis Jimenez and published by CRC Press. This book was released on 2019-10-17 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative reference presents an up-to-date review of the testing methods, emerging technologies, and analytical systems and procedures used to prevent the microbial contamination of pharmaceutical processes, products, and environments. It identifies new tools for sample analysis and evaluation and the impact of these advancements on the continuous supply and manufacturing of pharmaceutical products. With more than 100 tables and 430 current references, the book contains a detailed analysis of microbial contamination recalls for nonsterile and sterile pharmaceutical products, demonstrating the distribution of microorganisms worldwide and the identification by geographical regions.
Download or read book Microbiological Contamination Control in Pharmaceutical Clean Rooms written by Nigel Halls and published by CRC Press. This book was released on 2016-04-19 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contamination control in pharmaceutical clean rooms has developed from a jumble of science and engineering, knowledge of what has worked well or badly in the past, dependent upon the technology available at the time the clean room was built and subsequent technological developments. Surrounding it all is a blanket of regulations. Taking a multidisc
Download or read book Biocontamination Control for Pharmaceuticals and Healthcare written by Tim Sandle and published by Elsevier. This book was released on 2024-02-09 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biocontamination Control for Pharmaceuticals and Healthcare outlines a biocontamination strategy that tracks bio-burden control and reduction at each transition in classified areas of a facility. The first edition of the book covered many of the aspects of the strategy, but the new official guidance signals that a roadmap is required to fully comply with its requirements. Completely updated with the newest version of the EU-GPM (EN17141) the new edition expands the coverage of quality risk management and new complete examples to help professionals bridge the gap between regulation and implementation. Biocontamination Control for Pharmaceuticals and Healthcare offers professionals in pharma quality control and related areas guidance on building a complete biocontamination strategy. Includes the most current regulations Contains three new chapters, including Application of Quality Risk Management and its Application in Biocontamination Control, Designing an Environmental Monitoring Programme, and Synthesis: An Anatomy of a Contamination Control Strategy Offers practical guidance on building a complete biocontamination strategy
Download or read book Microbial Contamination Control in Parenteral Manufacturing written by Kevin Williams and published by CRC Press. This book was released on 2004-05-20 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference surveys emerging trends, concepts, and procedures used in the characterization and control of contaminants; the sterile production of traditional drugs and biologics; the design, construction, and validation of new parenteral facilities; and the monitoring of clean environments-vividly illustrating the routes by which products, processes, and manufacturing settings become contaminated through contact with the air, water, raw materials, and the actions of personnel, as well as the current methods necessary to successfully preclude contamination.
Download or read book Pharmaceutical Microbiological Quality Assurance and Control written by David Roesti and published by John Wiley & Sons. This book was released on 2020-01-02 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Relying on practical examples from the authors’ experience, this book provides a thorough and modern approach to controlling and monitoring microbial contaminations during the manufacturing of non-sterile pharmaceuticals. Offers a comprehensive guidance for non-sterile pharmaceuticals microbiological QA/QC Presents the latest developments in both regulatory expectations and technical advancements Provides guidance on statistical tools for risk assessment and trending of microbiological data Describes strategy and practical examples from the authors’ experience in globalized pharmaceutical companies and expert networks Offers a comprehensive guidance for non-sterile pharmaceuticals microbiological QA/QC Presents the latest developments in both regulatory expectations and technical advancements Provides guidance on statistical tools for risk assessment and trending of microbiological data Describes strategy and practical examples from the authors’ experience in globalized pharmaceutical companies and expert networks
Download or read book Handbook of Microbiological Quality Control in Pharmaceuticals and Medical Devices written by Rosamund M. Baird and published by CRC Press. This book was released on 2000-08-17 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microbiologists working in both the pharmaceutical and medical device industries, face considerable challenges in keeping abreast of the myriad microbiological references available to them, and the continuously evolving regulatory requirements. The Handbook of Microbiological Quality Control provides a unique distillation of such material, by provi
Download or read book The Use of Drugs in Food Animals written by National Research Council and published by National Academies Press. This book was released on 1999-01-12 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of drugs in food animal production has resulted in benefits throughout the food industry; however, their use has also raised public health safety concerns. The Use of Drugs in Food Animals provides an overview of why and how drugs are used in the major food-producing animal industriesâ€"poultry, dairy, beef, swine, and aquaculture. The volume discusses the prevalence of human pathogens in foods of animal origin. It also addresses the transfer of resistance in animal microbes to human pathogens and the resulting risk of human disease. The committee offers analysis and insight into these areas: Monitoring of drug residues. The book provides a brief overview of how the FDA and USDA monitor drug residues in foods of animal origin and describes quality assurance programs initiated by the poultry, dairy, beef, and swine industries. Antibiotic resistance. The committee reports what is known about this controversial problem and its potential effect on human health. The volume also looks at how drug use may be minimized with new approaches in genetics, nutrition, and animal management.
Download or read book Sources of Contamination in Medicinal Products and Medical Devices written by Denise Bohrer and published by John Wiley & Sons. This book was released on 2012-09-25 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first one-volume guide to sources of contamination in pharmaceuticals and medical devices Most books dealing with contaminants in medicinal products often focus on analytical methods for detecting nonspecific impurities. Key to the work of the pharmaceutical chemist, this unique reference helps identify the sources of contamination in medicinal and pharmaceutical products and medical devices. Divided into three parts, Sources of Contamination in Medicinal Products and Medical Devices covers chemical, microbiological, and physical (particulate matter) contamination, including those originating from sterilization procedures. As compelling as a medical documentary, the book sheds light on how impurities and contaminants can enter the human body transported via a specific product or treatment. Focusing on only those medicinal products and medical devices that may lead to exposure to contaminants harmful to human health, the book offers a comprehensive, systematic look at the entire universe of medical contamination: Chemical contaminants including residual solvents, catalyst residuals, and genotoxic impurities in active pharmaceutical ingredients (APIs) Diagnostic imaging agents (i.e., radiopharmaceuticals and contrast agents) Microbiological and endotoxin contamination involving single and multiple dose products, medical devices, and biofilms Contamination from sterilization procedures, residuals from radiation sterilization, ionizing radiation on packaging materials and medical devices Medicinal gases and volatile anesthetics Biopharmaceuticals including recombinant DNA technology products Extractables and leachables from containers made of glass, plastics, and metal Each section of the book contains information on what contaminants could be expected in a particular product, and how they were generated and reached that product. With up-to-date regulatory guidelines for determining contamination, as well as methods for assessing, quantifying, avoiding and removing contaminants, Sources of Contamination in Medicinal Products and Medical Devices is essential to fully understanding the specific threats that undermine the safety of medicines and medical devices.
Download or read book Pharmaceutical Microbiology written by Tim Sandle and published by Woodhead Publishing. This book was released on 2015-10-09 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pharmaceutical Microbiology: Essentials for Quality Assurance and Quality Control presents that latest information on protecting pharmaceutical and healthcare products from spoilage by microorganisms, and protecting patients and consumers. With both sterile and non-sterile products, the effects can range from discoloration to the potential for fatality. The book provides an overview of the function of the pharmaceutical microbiologist and what they need to know, from regulatory filing and GMP, to laboratory design and management, and compendia tests and risk assessment tools and techniques. These key aspects are discussed through a series of dedicated chapters, with topics covering auditing, validation, data analysis, bioburden, toxins, microbial identification, culture media, and contamination control. Contains the applications of pharmaceutical microbiology in sterile and non-sterile products Presents the practical aspects of pharmaceutical microbiology testing Provides contamination control risks and remediation strategies, along with rapid microbiological methods Includes bioburden, endotoxin, and specific microbial risks Highlights relevant case studies and risk assessment scenarios
Download or read book Pharmaceutical Microbiological Contamination Control written by Nigel Halls and published by . This book was released on 2006-10 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide to Microbiological Control in Pharmaceuticals written by S. P. Denyer and published by Taylor & Francis Group. This book was released on 1990 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: A handbook to the micro-organism as a contaminant and as a potential growth medium, focusing on the problems of microbiological control in pharmaceutical product design and manufacture. Topics include the relative susceptibilities of product types and ingredients and factory hygiene.
Download or read book Microbial Limit and Bioburden Tests written by Lucia Clontz and published by CRC Press. This book was released on 2008-10-14 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, the field of pharmaceutical microbiology has experienced numerous technological advances, accompanied by the publication of new and harmonized compendial methods. It is therefore imperative for those who are responsible for monitoring the microbial quality of pharmaceutical/biopharmaceutical products to keep abreast of the latest c
Download or read book Active Pharmaceutical Ingredients Second Edition written by Samuel H Yalkowsky and published by . This book was released on 2009-12-23 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Equivalence testing has grown significantly in importance over the last two decades, especially as its relevance to a variety of applications has become understood. Yet published work on the general methodology remains scattered in specialists' journals, and for the most part, it focuses on the relatively narrow topic of bioequivalence assessment. With a far broader perspective, Testing Statistical Hypotheses of Equivalence provides the first comprehensive treatment of statistical equivalence testing. The author addresses a spectrum of...
Download or read book Microbial Control and Identification written by Donna Reber and published by . This book was released on 2018-09 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide to Microbiological Control in Pharmaceuticals and Medical Devices Second Edition written by Stephen P. Denyer and published by CRC Press. This book was released on 2006-12-26 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microbiological matters continue to exercise considerable influence on product quality. In both the pharmaceutical and medical device industries, products of greater sophistication, along with evolving regulatory requirements, are elevating the challenges related to maintaining microbiological integrity. Updated to reflect technological and regulatory changes, the Guide to Microbiological Control in Pharmaceuticals and Medical Devices, Second Edition covers thoseprincipal aspects of microbiology that arerelevant to the preformulation, formulation, manufacturing, and license application stages involved with the production of pharmaceuticals and medical devices. In recognition of the diverse disciplines involved in pharmaceutical and medical device production, this work provides a brief introduction to microbiology geared towards the nonmicrobiologist. Covering good manufacturing practice in the control of contamination, the text explores quality control, the preservation of formulations, and principles of sterilization, including microbiological-specific considerations for biotechnological products and other medical devices. It also provides additional materials on package integrity and contamination risks in clean rooms. The editors have produced a companion text, the Handbook of Microbiological Quality Control in Pharmaceuticals and Medical Devices (see reverse), which when paired with the Guide offers a complete theoretical and practical treatment of microbiological control. This book provides a comprehensive distillation of information concerning methodology and regulations that would otherwise remain scattered throughout the literature. It allows scientists from many fields to address potential problems in advance and implement suitable strategies at the earliest stages of development.
Download or read book Contamination Control in Practice written by Matts Ramstorp and published by Wiley-VCH. This book was released on 2003 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contamination control has received great interest and found increasing use within several industrial branches including microelectronics, pharmaceuticals, food and beverages using various concepts of contamination control in their production, purification or packaging process. The book supplies a holistic view of contamination control, presenting the different types of contaminants in a summarized form. The focus is on how to protect products and processes from external contamination and also on different ways to take care of and control contaminants generated in the process. The aim is to eliminate them from a product or a process flow (e.g. through filtration), or to render them harmless (e.g. through sterilisation by moist heat). Product purity or the cleanliness of process flows are often complex matters and hard to define in easily understood terms. This book covers a variety of different techniques used in order to achieve and maintain certain overall cleanliness levels for both microbiological or inanimate particle contaminants. It supplies basic knowledge including validation aspects for industrial branches working with increased demands of cleanliness, for instance water purification, steam, pressurized gases and different flows in a process together with finished products.