Download or read book Microanalysis of Solids written by B.G. Yacobi and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this book is to systematically describe the basic principles of the most widely used techniques for the analysis of physical, structural, and compositional properties of solids with a spatial resolution of approxi mately 1 ~m or less. Many books and reviews on a wide variety of microanalysis techniques have appeared in recent years, and the purpose of this book is not to replace them. Rather, the motivation for combining the descriptions of various mi croanalysis techniques in one comprehensive volume is the need for a reference source to help identify microanalysis techniques, and their capabilities, for obtaining particular information on solid-state materials. In principle, there are several possible ways to group the various micro analysis techniques. They can be distinguished by the means of excitation, or the emitted species, or whether they are surface or bulk-sensitive techniques, or on the basis of the information obtained. We have chosen to group them according to the means of excitation. Thus, the major parts of the book are: Electron Beam Techniques, Ion Beam Techniques, Photon Beam Techniques, Acoustic Wave Excitation, and Tunneling of Electrons and Scanning Probe Microscopies. We hope that this book will be useful to students (final year undergrad uates and graduates) and researchers, such as physicists, material scientists, electrical engineers, and chemists, working in a wide variety of fields in solid state sciences.
Download or read book Cathodoluminescence Microscopy of Inorganic Solids written by B.G. Yacobi and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microcharacterization of materials is a rapidly advancing field. Among the many electron and ion probe techniques, the cathodoluminescence mode of an electron probe instrument has reached a certain maturity, which is reflected by an increas ing number of publications in this field. The rapid rate of progress in applications of cathodoluminescence techniques in characterizing inorganic solids has been especially noticeable in recent years. The main purpose of the book is to outline the applications of cath odoluminescence techniques in the assessment of optical and electronic proper ties of inorganic solids, such as semiconductors, phosphors, ceramics, and min erals. The assessment provides, for example, information on impurity levels derived from cathodoluminescence spectroscopy, analysis of dopant concentra tions at a level that, in some cases, is several orders of magnitude lower than that attainable by x-ray microanalysis, the mapping of defects, and the determination of carrier lifetimes and the charge carrier capture cross sections of impurities. In order to make the book self-contained, some basic concepts of solid-state phys ics, as well as various cathodoluminescence techniques and the processes leading to luminescence phenomena in inorganic solids, are also described. We hope that this book will be useful to both scientists and graduate students interested in microcharacterization of inorganic solids. This book, however, was not intended as a definitive account of cathodoluminescence analysis of in organic solids. In considering the results presented here, readers should re member that many materials have properties that vary widely as a function of preparation conditions.
Download or read book The Local Chemical Analysis of Materials written by J. W. Martin and published by Elsevier. This book was released on 2003-10-31 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Expert, up-to-date guidance on the appropriate techniques of local chemical analysis * Comprehensive. This volume is an ideal starting point for material research and development, bringing together a number of techniques usually only found in isolation * Recent examples of the applications of techniques are provided in all cases Helping to solve the problems of materials scientists in academia and industry, this book offers guidance on appropriate techniques of chemical analysis of materials at the local level, down to the atomic scale. Comparisons are made between various techniques in terms of the nature of the probe employed. The detection limit and the optimum spatial resolution is also considered, as well as the range of atomic number that may be identified and the precision and methods of calibration, where appropriate. The Local Chemical Analysis of Materials is amply illustrated allowing the reader to easily see typical results. It includes a comparative table of techniques to aid selection for analysis and a table of acronyms, particularly valuable in this jargon-riddled area.
Download or read book Solid Sample Analysis written by Ulrich Kurfürst and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The analysis of solid materials by introducing solid test sampies directly into the graphite furnace of an atomic absorption spectrometer must be regarded as a powerful analytical approach. Even if it is - of course - not the "ultimate method". After three decades of development, the instrumentation and the methodology are available to apply solid sampling successfully for the analysis of almost every material. Moreover, several tasks cannot be solved using other analytical methods as neatly as they can using direct solid sampling. The conventional methods work more or less satisfactorily, so why do we sug gest applying solid sampling much more extensively than it is today? To begin with, the features pointed out time and again should be named: Rapidity of the analytical procedure, low susceptibility to analyte loss or contamination, very smallquantities can be analyzed, and expenditure on instrumentation and per sonell is also low. These properties are examined and the necessary conditions are discussed (Chapter 1) as are the analytical tasks (Chapter 6) for which use of this method is advantageous. Other features that are often overlooked are just as important: The simplicity of the analytical procedures allows the analyst to main tain an intimate relationship with the original scientific task that has to be solved with the analysis. Furthermore, the considerable reduction of working place haz ards and pollution by avoiding the use of chemical reagents must nowadays be assessed as a feature as important as the others.
Download or read book Scanning Electron Microscopy and X Ray Microanalysis written by Joseph Goldstein and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has evolved by processes of selection and expansion from its predecessor, Practical Scanning Electron Microscopy (PSEM), published by Plenum Press in 1975. The interaction of the authors with students at the Short Course on Scanning Electron Microscopy and X-Ray Microanalysis held annually at Lehigh University has helped greatly in developing this textbook. The material has been chosen to provide a student with a general introduction to the techniques of scanning electron microscopy and x-ray microanalysis suitable for application in such fields as biology, geology, solid state physics, and materials science. Following the format of PSEM, this book gives the student a basic knowledge of (1) the user-controlled functions of the electron optics of the scanning electron microscope and electron microprobe, (2) the characteristics of electron-beam-sample inter actions, (3) image formation and interpretation, (4) x-ray spectrometry, and (5) quantitative x-ray microanalysis. Each of these topics has been updated and in most cases expanded over the material presented in PSEM in order to give the reader sufficient coverage to understand these topics and apply the information in the laboratory. Throughout the text, we have attempted to emphasize practical aspects of the techniques, describing those instru ment parameters which the microscopist can and must manipulate to obtain optimum information from the specimen. Certain areas in particular have been expanded in response to their increasing importance in the SEM field. Thus energy-dispersive x-ray spectrometry, which has undergone a tremendous surge in growth, is treated in substantial detail.
Download or read book Mass Spectrometric Analysis of Solids written by Arthur John Ahearn and published by . This book was released on 1966 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Guide to Materials Characterization and Chemical Analysis written by John P. Sibilia and published by John Wiley & Sons. This book was released on 1996-12-17 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written both for the novice and for the experienced scientist, this miniature encyclopedia concisely describes over one hundred materials methodologies, including evaluation, chemical analysis, and physical testing techniques. Each technique is presented in terms of its use, sample requirements, and the engineering principles behind its methodology. Real life industrial and academic applications are also described to give the reader an understanding of the significance and utilization of technique. There is also a discussion of the limitations of each technique.
Download or read book Practical Scanning Electron Microscopy written by Joseph Goldstein and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the spring of 1963, a well-known research institute made a market survey to assess how many scanning electron microscopes might be sold in the United States. They predicted that three to five might be sold in the first year a commercial SEM was available, and that ten instruments would saturate the marketplace. In 1964, the Cambridge Instruments Stereoscan was introduced into the United States and, in the following decade, over 1200 scanning electron microscopes were sold in the U. S. alone, representing an investment conservatively estimated at $50,000- $100,000 each. Why were the market surveyers wrongil Perhaps because they asked the wrong persons, such as electron microscopists who were using the highly developed transmission electron microscopes of the day, with resolutions from 5-10 A. These scientists could see little application for a microscope that was useful for looking at surfaces with a resolution of only (then) about 200 A. Since that time, many scientists have learned to appreciate that information content in an image may be of more importance than resolution per se. The SEM, with its large depth of field and easily that often require little or no sample prepara interpreted images of samples tion for viewing, is capable of providing significant information about rough samples at magnifications ranging from 50 X to 100,000 X. This range overlaps considerably with the light microscope at the low end, and with the electron microscope at the high end.
Download or read book Soft X ray Microanalysis and Microscopy A Unique Probe of the Organic Chemistry of Heterogeneous Solids written by and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electron Beam Interactions with Solids for Microscopy Microanalysis Microlithography written by David F. Kyser and published by Scanning Electron Microscopy. This book was released on 1984 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scanning Electron Microscopy written by Ludwig Reimer and published by Springer. This book was released on 2013-11-11 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scanning Electron Microscopy provides a description of the physics of electron-probe formation and of electron-specimen interactions. The different imaging and analytical modes using secondary and backscattered electrons, electron-beam-induced currents, X-ray and Auger electrons, electron channelling effects, and cathodoluminescence are discussed to evaluate specific contrasts and to obtain quantitative information.
Download or read book Methods of Surface Analysis written by A.W. Czanderna and published by Elsevier. This book was released on 2012-12-02 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods of Surface Analysis deals with the determination of the composition of surfaces and the identification of species attached to the surface. The text applies methods of surface analysis to obtain a composition depth profile after various stages of ion etching or sputtering. The composition at the solid—solid interface is revealed by systematically removing atomic planes until the interface of interest is reached, in which the investigator can then determine its composition. The book reviews the effect of ion etching on the results obtained by any method of surface analysis including the effect of the rate of etching, incident energy of the bombarding ion, the properties of the solid, the effect of the ion etching on generating an output signal of electrons, ions, or neutrals. The text also describes the effect of the residual gases in the vacuum environment. The book considers the influence of the sample geometry, of the type (metal, insulator, semiconductor, organic), and of the atomic number can have on surface analysis. The text describes in detail low energy ion scattering spectroscopy, X-ray photoelectron spectroscopy, Auger electron spectroscopy, secondary ion mass spectroscopy, and infrared reflection-absorption spectroscopy. The book can prove useful for researchers, technicians, and scientists whose works involve organic chemistry, analytical chemistry, and other related fields of chemistry, such as physical chemistry or inorganic chemistry.
Download or read book Concise Encyclopedia of Materials Characterization written by R.W. Cahn and published by Elsevier. This book was released on 2016-01-22 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: To use materials effectively, their composition, degree of perfection, physical and mechanical characteristics, and microstructure must be accurately determined. This concise encyclopledia covers the wide range of characterization techniques necessary to achieve this. Articles included are not only concerned with the characterization techniques of specific materials such as polymers, metals, ceramics and semiconductors but also techniques which can be applied to materials in general. The techniques described cover bulk methods, and also a number of specific methods to study the topography and composition of surface and near-surface regions. These techniques range from the well-established and traditional to the very latest including: atomic force microscopy; confocal optical microscopy; gamma ray diffractometry; thermal wave imaging; x-ray diffraction and time-resolved techniques. This unique concise encyclopedia comprises 116 articles by leading experts in the field from around the world to create the ideal guide for materials scientists, chemists and engineers involved with any aspect of materials characterization. With over 540 illustrations, extensive cross-referencing, approximately 900 references, and a detailed index, this concise encyclopedia will be a valuable asset to any materials science collection.
Download or read book Micro homogeneity Studies of NBS Standard Reference Materials NBS Research Materials and Other Related Samples written by R. B. Marinenko and published by . This book was released on 1979 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Progress in Materials Analysis written by M. Grasserbauer and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 11th Colloquium on Metallurgical Analysis - a joint venture of the Institute of Analytical Chemistry of the Technical University in Vienna, the Austrian Society for Analytical Chemistry and Microchemistry, the German Metals Society (DGM), and the Society of German Iron and Steel Engineers (VDEh) - was attended by 120 scientists from 12 nations. The major topics covered were surface, micro and trace analysis of materials with a heavy emphasis on metals. According to the strategy of the meeting attention was focussed on an interdisciplinary approach to materials science - combining analytical chemistry, solid state physics and tech nology. Therefore progress reports on analytical techniques (like SIMS, SNMS, Positron Annihilation Spectroscopy, AES, XPS) were given as well as pre sentations on the development of materials (like for the fusion reactor). The majority of the discussion papers centered on the treatment of important technical problems in materials science and technology by a (mostly sophis ticated) combination of physical and chemical analytical techniques. The intensive exchange of ideas and results between the scientists oriented towards basic research and the industrial materials technologists was very fruitful and resulted in the establishment of several scientific cooperations. Major trends in materials analysis were also dealt with in a plenary discussion of which a short summary is contained in this volume. In order to facilitate international communication in the field of materials analysis and in view of the important questions treated in the various contri butions this proceedings volume was edited in English.
Download or read book Non destructive Micro Analysis of Cultural Heritage Materials written by K. Janssens and published by Elsevier. This book was released on 2004-11-26 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the scientific and technical background materials of non-destructive methods of microscopic analysis that are suitable for analysing works of art, museum pieces and archeaological artefacts. Written by experts in the field, this multi-author volume contains a number of case studies, illustrating the value of these methods. The book is suited to natural scientists and analysts looking to increase their knowledge of the various methods that are currently available for non-destructive analysis. It is also the perfect resource for museum curators, archaeologists and art-historians seeking to identify one or more suitable methods of analysis that could solve material-related problems.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1986 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt:
