Download or read book Micro Relay Technology for Energy Efficient Integrated Circuits written by Hei Kam and published by Springer. This book was released on 2014-10-16 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume describes the design of relay-based circuit systems from device fabrication to circuit micro-architectures. This book is ideal for both device engineers as well as circuit system designers, and highlights the importance of co-design across design hierarchies when trying to optimize system performance (in this case, energy-efficiency). The book will also appeal to researchers and engineers focused on semiconductor, integrated circuits, and energy efficient electronics.
Download or read book Advanced Relay Design and Technology for Energy Efficient Electronics written by Jaeseok Jeon and published by . This book was released on 2011 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the era of traditional Complementary-Metal-Oxide-Semiconductor (CMOS) technology scaling is coming to an end, continual improvements in integrated-circuit (IC) performance and cost per function are becoming difficult to achieve without increasing power density. This necessitates the investigation of alternate device technologies that surmount the fundamental CMOS energy-efficiency limit and hence enable ultra-low-power ICs. To that end, a nano-electro-mechanical (NEM) relay technology is promising, because of its immeasurably low off-state leakage current and abrupt turn-on behavior, which provide for zero static power consumption and potentially very low dynamic power consumption. In this dissertation, relay design and process technology improvements, which led to the successful demonstration of relay-based digital IC building blocks, are discussed from both device- and circuit-level perspectives. A non-volatile (NV) memory relay design that can enable embedding of NV memory with relay-based logic circuits is also discussed. In addition, multielectrode relays that can lead to smarter design and compact implementation of zero-leakage digital integrated circuits are discussed.
- Author : Hossein Fariborzi
- Publisher :
- Release : 2013
- ISBN :
- Pages : 121 pages
Design and Demonstration of Integrated Micro electro mechanical Relay Circuits for VLSI Applications
Download or read book Design and Demonstration of Integrated Micro electro mechanical Relay Circuits for VLSI Applications written by Hossein Fariborzi and published by . This book was released on 2013 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complementary-Metal-Oxide-Semiconductor (CMOS) feature size scaling has resulted in significant improvements in the performance and energy efficiency of integrated circuits in the past 4 decades. However, in the last decade and for technology nodes below 90 nm, the scaling of threshold and supply voltages has slowed, as a result of subthreshold leakage, and power density has increased with each new technology node. This has forced a move toward multi-core architectures, but the energy efficiency benefits of parallelism are limited by the sub-thresahold leakage and the minimum energy point for a given function. Avoiding this roadblock requires an alternative device with more ideal switching characteristics. One promising class of such devices is the electro-statically actuated micro-electro-mechanical (MEM) relay which offers zero leakage current and abrupt turn-on behavior. Although a MEM relay is inherently slower than a CMOS transistor due to the mechanical movement, we have developed circuit design methodologies to mitigate this problem at the system level. This thesis explores such design optimization techniques and investigates the viability of MEM relays as an alternative switching technology for very-large scale integration (VLSI) applications. In the first part of this thesis, the feasibility of MEM relays for power management applications is discussed. Due to their negligibly low leakage, in certain applications, chips utilizing power gates built with MEM relays can achieve lower total energy than those built with CMOS transistors. A simple comparative analysis is presented and provides design guidelines and energy savings estimates as a function of technology parameters, and quantifies the further benefits of scaled relay designs. We also demonstrate a relay chip successfully power-gating a CMOS chip, and show a relay-based pulse generator suitable for self-timed operation. Going beyond power-gating applications, this work also describes circuit techniques and trade-offs for logic design with MEM-relays, focusing on multipliers which are commonly known as the most complex arithmetic units in a digital system. These techniques leverage the large disparity between mechanical and electrical time-constants of a relay, partitioning the logic into large, complex gates to minimize the effect of mechanical delay and improve circuit performance. At the component design level, innovations in compressor unit design minimize the required number of relays for each block and facilitate component cascading with no delay penalty. We analyze the area/energy/delay trade-offs vs. CMOS designs, for typical bit-widths, and show that scaled relays offer 10-20x lower energy per operation for moderate throughputs (
Download or read book VLSI written by Tomasz Wojcicki and published by CRC Press. This book was released on 2017-12-19 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently the world celebrated the 60th anniversary of the invention of the first transistor. The first integrated circuit (IC) was built a decade later, with the first microprocessor designed in the early 1970s. Today, ICs are a part of nearly every aspect of our daily lives. They help us live longer and more comfortably, and do more, faster. All this is possible because of the relentless search for new materials, circuit designs, and ideas happening on a daily basis at industrial and academic institutions around the globe. Showcasing the latest advances in very-large-scale integrated (VLSI) circuits, VLSI: Circuits for Emerging Applications provides a balanced view of industrial and academic developments beyond silicon and complementary metal–oxide–semiconductor (CMOS) technology. From quantum-dot cellular automata (QCA) to chips for cochlear implants, this must-have resource: Investigates the trend of combining multiple cores in a single chip to boost performance of the overall system Describes a novel approach to enable physically unclonable functions (PUFs) using intrinsic features of a VLSI chip Examines the VLSI implementations of major symmetric and asymmetric key cryptographic algorithms, hash functions, and digital signatures Discusses nonvolatile memories such as resistive random-access memory (Re-RAM), magneto-resistive RAM (MRAM), and floating-body RAM (FB-RAM) Explores organic transistors, soft errors, photonics, nanoelectromechanical (NEM) relays, reversible computation, bioinformatics, asynchronous logic, and more VLSI: Circuits for Emerging Applications presents cutting-edge research, design architectures, materials, and uses for VLSI circuits, offering valuable insight into the current state of the art of micro- and nanoelectronics.
Download or read book Novel Material Integration for Reliable and Energy Efficient NEM Relay Technology written by I-Ru Chen and published by . This book was released on 2014 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy-efficient switching devices have become ever more important with the emergence of ubiquitous computing. NEM relays are promising to complement CMOS transistors as circuit building blocks for future ultra-low-power information processing, and as such have recently attracted significant attention from the semiconductor industry and researchers. Relay technology potentially can overcome the energy efficiency limit for conventional CMOS technology due to several key characteristics, including zero OFF-state leakage, abrupt switching behavior, and potentially very low active energy consumption. However, two key issues must be addressed for relay technology to reach its full potential: surface oxide formation at the contacting surfaces leading to increased ON-state resistance after switching, and high switching voltages due to strain gradient present within the relay structure. This dissertation advances NEM relay technology by investigating solutions to both of these pressing issues. Ruthenium, whose native oxide is conductive, is proposed as the contacting material to improve relay ON-state resistance stability. Ruthenium-contact relays are fabricated after overcoming several process integration challenges, and show superior ON-state resistance stability in electrical measurements and extended device lifetime. The relay structural film is optimized via stress matching among all layers within the structure, to provide lower strain gradient (below 10E-3/μm) and hence lower switching voltage. These advancements in relay technology, along with the integration of a metallic interconnect layer, enable complex relay-based circuit demonstration. In addition to the experimental efforts, this dissertation theoretically analyzes the energy efficiency limit of a NEM switch, which is generally believed to be limited by the surface adhesion energy. New compact (
Download or read book Issues in Electronic Circuits Devices and Materials 2012 Edition written by and published by ScholarlyEditions. This book was released on 2013-01-10 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Electronic Circuits, Devices, and Materials: 2012 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Lasers and Photonics. The editors have built Issues in Electronic Circuits, Devices, and Materials: 2012 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Lasers and Photonics in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Electronic Circuits, Devices, and Materials: 2012 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Ultra Low Power Electronics and Adiabatic Solutions written by Hervé Fanet and published by John Wiley & Sons. This book was released on 2016-08-29 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: The improvement of energy efficiency in electronics and computing systems is currently central to information and communication technology design; low-cost cooling, autonomous portable systems and functioning on recovered energy all need to be continuously improved to allow modern technology to compute more while consuming less. This book presents the basic principles of the origins and limits of heat dissipation in electronic systems. Mechanisms of energy dissipation, the physical foundations for understanding CMOS components and sophisticated optimization techniques are explored in the first half of the book, before an introduction to reversible and quantum computing. Adiabatic computing and nano-relay technology are then explored as new solutions to achieving improvements in heat creation and energy consumption, particularly in renewed consideration of circuit architecture and component technology. Concepts inspired by recent research into energy efficiency are brought together in this book, providing an introduction to new approaches and technologies which are required to keep pace with the rapid evolution of electronics.
Download or read book Ultra Low Power Electronics and Adiabatic Solutions written by Hervé Fanet and published by John Wiley & Sons. This book was released on 2016-08-16 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: The improvement of energy efficiency in electronics and computing systems is currently central to information and communication technology design; low-cost cooling, autonomous portable systems and functioning on recovered energy all need to be continuously improved to allow modern technology to compute more while consuming less. This book presents the basic principles of the origins and limits of heat dissipation in electronic systems. Mechanisms of energy dissipation, the physical foundations for understanding CMOS components and sophisticated optimization techniques are explored in the first half of the book, before an introduction to reversible and quantum computing. Adiabatic computing and nano-relay technology are then explored as new solutions to achieving improvements in heat creation and energy consumption, particularly in renewed consideration of circuit architecture and component technology. Concepts inspired by recent research into energy efficiency are brought together in this book, providing an introduction to new approaches and technologies which are required to keep pace with the rapid evolution of electronics.
Download or read book Nano Electro Mechanical NEM Relay Devices and Technology for Ultra Low Energy Digital Integrated Circuits written by Rhesa Nathanael and published by . This book was released on 2012 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complementary-Metal-Oxide-Semiconductor (CMOS) technology scaling has brought about an integrated circuits (IC) revolution over the past 40+ years, due to dramatic increases in IC functionality and performance, concomitant with reductions in cost per function. In the last decade, increasing power density has emerged to be the primary barrier to continued rapid advancement in IC technology, fundamentally due to non-zero transistor off-state leakage. While innovations in materials, transistor structures, and circuit/system architecture have enabled the semiconductor industry to continue to push the boundaries, a fundamental lower limit in energy per operation will eventually be reached. A more ideal switching device with zero off-state leakage becomes necessary. This dissertation proposes a solution to the CMOS power crisis via mechanical computing. Specifically, robust electro-mechanical relay technologies are developed for digital circuit application. A 4-Terminal (4T) relay design is firstly developed. Key technology features include tungsten contacts for high endurance; low-thermal-budget p+-poly-Si0.4Ge0.6 structure for post-CMOS process compatibility; Al2O3 as a reliable insulation material; dry release step to mitigate stiction; and folded-flexure design to mitigate the impact of residual stress. Fabricated relays show good conductance (RON IOFF ~ 10-14 A). Switching delay in the 100 ns range and endurance exceeding 109 on/off cycles is achieved with excellent device yield (> 95%). With relay design and process optimizations, pull-in voltage below 10 V with less than 1 V hysteresis is achieved. Miniaturization reduces the device footprint to 35[mu]m×50[mu]m, ~10% of the first generation device footprint (120[mu]m×150[mu]m). Relays with multiple source/drain electrodes and multiple gate electrodes are proposed for increased circuit functionality and reduced device count. Finally, simple relay-based logic circuits are demonstrated to show pathways to relay-based digital integrated circuits. The complementary inverter is the basis for all digital logic circuits and is investigated in depth. Relay-based logic gates are demonstrated using CMOS-like and relay-specific design approaches. Multi-input/multi-output relays are proposed to enable any complex logic function to be implemented compactly with only two relays.
Download or read book Emerging Devices for Low Power and High Performance Nanosystems written by Simon Deleonibus and published by CRC Press. This book was released on 2018-12-13 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: The history of information and communications technologies (ICT) has been paved by both evolutive paths and challenging alternatives, so-called emerging devices and architectures. Their introduction poses the issues of state variable definition, information processing, and process integration in 2D, above IC, and in 3D. This book reviews the capabilities of integrated nanosystems to match low power and high performance either by hybrid and heterogeneous CMOS in 2D/3D or by emerging devices for alternative sensing, actuating, data storage, and processing. The choice of future ICTs will need to take into account not only their energy efficiency but also their sustainability in the global ecosystem.
Download or read book Microelectronics to Nanoelectronics written by Anupama B. Kaul and published by CRC Press. This book was released on 2012-08-24 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composed of contributions from top experts, Microelectronics to Nanoelectronics: Materials, Devices and Manufacturability offers a detailed overview of important recent scientific and technological developments in the rapidly evolving nanoelectronics arena. Under the editorial guidance and technical expertise of noted materials scientist Anupama B. Kaul of California Institute of Technology’s Jet Propulsion Lab, this book captures the ascent of microelectronics into the nanoscale realm. It addresses a wide variety of important scientific and technological issues in nanoelectronics research and development. The book also showcases some key application areas of micro-electro-mechanical-systems (MEMS) that have reached the commercial realm. Capitalizing on Dr. Kaul’s considerable technical experience with micro- and nanotechnologies and her extensive research in prestigious academic and industrial labs, the book offers a fresh perspective on application-driven research in micro- and nanoelectronics, including MEMS. Chapters explore how rapid developments in this area are transitioning from the lab to the market, where new and exciting materials, devices, and manufacturing technologies are revolutionizing the electronics industry. Although many micro- and nanotechnologies still face major scientific and technological challenges and remain within the realm of academic research labs, rapid advances in this area have led to the recent emergence of new applications and markets. This handbook encapsulates that exciting recent progress by providing high-quality content contributed by international experts from academia, leading industrial institutions—such as Hewlett-Packard—and government laboratories including the U.S. Department of Energy’s Sandia National Laboratory. Offering something for everyone, from students to scientists to entrepreneurs, this book showcases the broad spectrum of cutting-edge technologies that show significant promise for electronics and related applications in which nanotechnology plays a key role.
Download or read book CMOS and Beyond written by Tsu-Jae King Liu and published by Cambridge University Press. This book was released on 2015-02-05 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get up to speed with the future of logic switch design with this indispensable overview of the most promising successors to modern CMOS transistors. Learn how to overcome existing design challenges using novel device concepts, presented using an in-depth, accessible, tutorial-style approach. Drawing on the expertise of leading researchers from both industry and academia, and including insightful contributions from the developers of many of these alternative logic devices, new concepts are introduced and discussed from a range of different viewpoints, covering all the necessary theoretical background and developmental context. Covering cutting-edge developments with the potential to overcome existing limitations on transistor performance, such as tunneling field-effect transistors (TFETs), alternative charge-based devices, spin-based devices, and more exotic approaches, this is essential reading for academic researchers, professional engineers, and graduate students working with semiconductor devices and technology.
Download or read book Energy Efficient Circuit Design Using Nanoelectromechanical Relays written by Ramakrishnan Venkatasubramanian and published by . This book was released on 2012 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: In nanoscale electromechanical devices, dispersion forces like Van der Waals' force (vdW) affect the pull-in stability of the relay devices significantly. Verilog-A electromechanical model of the suspended gate relay operating at 1V with a nominal air gap of 5 - 10nm has been developed taking into account all the electrical, mechanical and dispersion effects.
Download or read book Energy Autonomous Micro and Nano Systems written by Marc Belleville and published by John Wiley & Sons. This book was released on 2012-12-17 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a detailed overview of the fundamentals and latest developments in the field of energy autonomous microsystems, this book delivers an in-depth study of the applications in the fields of health and usage monitoring in aeronautics, medical implants, and home automation, drawing out the main specifications on such systems. Introductory information on photovoltaic, thermal and mechanical energy harvesting, and conversion, is given, along with the latest results in these fields. This book also provides a state of the art of ultra-low power sensor interfaces, digital signal processing and wireless communications. In addition, energy optimizations at the sensor node and sensors network levels are discussed, thus completing this overview. This book details the challenges and latest techniques available to readers who are interested in this field. A major strength of this book is that the first three chapters are application orientated and thus, by setting the landscape, introduce the technical chapters. There is also a good balance between the technical application, covering all the system-related aspects and, within each chapter, details on the physics, materials and technologies associated with electronics. Contents Introduction. Introduction to Energy Autonomous Micro and Nano Systems and Presentation of Contributions, Marc Belleville and Cyril Condemine. 1. Sensors at the Core of Building Control, Gilles Chabanis, Laurent Chiesi, Hynek Raisigel, Isabelle Ressejac and Véronique Boutin. 2. Toward Energy Autonomous MedicalImplants, Raymond Campagnolo and Daniel Kroiss. 3. Energy Autonomous Systems in Aeronautic Applications, Thomas Becker, Jirka Klaue and Martin Kluge. 4. Energy Harvesting by Photovoltaic Effect, Emmanuelle Rouvière, Simon Perraud, Cyril Condemine and Guy Waltisperger. 5. Mechanical Energy Harvesting, Ghislain Despesse, Jean Jacques Chaillout, Sébastien Boisseau and Claire Jean-Mistral. 6. Thermal Energy Harvesting, Tristan Caroff, Emmanuelle Rouvière and Jérôme Willemin. 7. Lithium Micro-Batteries, Raphaël Salot. 8. Ultra-Low-Power Sensors, Pascal Nouet, Norbert Dumas, Laurent Latorre and Frédérick Mailly. 9. Ultra-Low-Power Signal Processing in Autonomous Systems, Christian Piguet. 10. Ultra-Low-Power Radio Frequency Communications and Protocols, Eric Mercier. 11. Energy Management in an Autonomous Microsystem, Jean-Frédéric Christmann, Edith Beigne, Cyril Condemine, Jérôme Willemin and Christian Piguet. 12. Optimizing Energy Efficiency of Sensor Networks, Olivier Sentieys and Olivier Berder.
Download or read book MEMS Product Development written by Alissa M. Fitzgerald and published by Springer Nature. This book was released on 2021-03-16 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing on their experiences in successfully executing hundreds of MEMS development projects, the authors present the first practical guide to navigating the technical and business challenges of MEMS product development, from the initial concept stage all the way to commercialization. The strategies and tactics presented, when practiced diligently, can shorten development timelines, help avoid common pitfalls, and improve the odds of success, especially when resources are limited. MEMS Product Development illuminates what it really takes to develop a novel MEMS product so that innovators, designers, entrepreneurs, product managers, investors, and executives may properly prepare their companies to succeed.
Download or read book CMOSET 2013 Abstracts written by CMOS Emerging Technologies Research and published by CMOS Emerging Technologies. This book was released on with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Space Microsystems and Micro Nano Satellites written by Zheng You and published by Butterworth-Heinemann. This book was released on 2017-11-22 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: Space Microsystems and Micro/Nano Satellites covers the various reasoning and diverse applications of small satellites in both technical and regulatory aspects, also exploring the technical and operational innovations that are being introduced in the field. The Space Microsystem developed by the author is systematically introduced in this book, providing information on such topics as MEMS micro-magnetometers, MIMUs (Micro-inertia-measurement unit), micro-sun sensors, micro-star sensors, micro-propellers, micro-relays, etc. The book also examines the new technical standards, removal techniques or other methods that might help to address current problems, regulatory issues and procedures to ameliorate problems associated with small satellites, especially mounting levels of orbital debris and noncompliance with radio frequency and national licensing requirements, liabilities and export controls, Summarizing the scientific research experiences of the author and his team, this book holds a high scientific reference value as it gives readers comprehensive and thorough introductions to the micro/nano satellite and space applications of MEMS technology. Covers various reasoning and diverse applications for small satellites in both technical and regulatory aspects Represents the first publication that systematically introduces the Space Microsystem developed by the author Examines new technical standards, removal techniques and other methods that might help to address current problems, regulatory issues and procedures