Download or read book The Micro hydro Pelton Turbine Manual written by Jeremy Thake and published by Intermediate Technology. This book was released on 2000 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Where flow is limited but high heads of water are available the Pelton wheel is one of the most useful turbines. It can be fabricated in small engineering shops with basic facilities. Jeremy Thake explains how to design, make and use them.
Download or read book Micro Pelton Turbines written by Markus Eisenring and published by Skat. This book was released on 1991 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micro hydro Design Manual written by Adam Harvey and published by Intermediate Technology. This book was released on 1993-01 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-Hydro Design Manual has grown from Intermediate Technology's field experiences with micro-hydro installations and covers operation and maintenance, commissioning, electrical power, induction generators, electronic controllers, management, and energy surveys.There is an increasing need in many countries for power supplies to rural areas, partly to support industries, and partly to provide illumination at night. Government authorities are faced with the very high costs of extending electricity grids. Often micro-hydro provides an economic alternative to the grid. This is because independentmicro-hydro schemes save on the cost of grid transmission lines, and because grid extension schemes often have very expensive equipment and staff costs. In contrast, micro-hydro schemes can be designed and built by local staff andsmaller organizations following less strict regulations and using 'off-the-shelf' components or locally made machinery.
Download or read book Pumps as Turbines written by Armando Carravetta and published by Springer. This book was released on 2017-10-24 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides users, pump manufactures, engineers, researchers and students with extensive information about pump’s behavior in reverse operation. It reports on cutting-edge methods for selecting the proper PAT and improving PAT’s efficiency, discusses PAT’s reliability, economic issues and environmental impact as well. The book describes in detail electromechanical equipment of PAT systems, their installation and operation, and gives important practical insight into the use of PAT in water transmission and distribution systems, as part of thermal power plants and cooling systems, in oil distribution systems and other systems as well. It reports on different types on PAT control modes as well as on numerical methods useful for PAT analysis and implementation. All in all, the book represents a comprehensive practice-oriented reference-guide to design engineers, as well as PAT general users and manufactures. It also provides researchers with extensive technical information on the use of PAT thus fostering new discussions and ideas to improve current methods and cope with future challenges.
Download or read book Designing and Building Mini and Micro Hydropower Schemes written by Luis Rodríguez and published by Practical Action Publishing. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical manual is a major new addition to the resources available for micro-hydro power project and programme managers worldwide and represents excellent value for such a detailed technical reference handbook.
Download or read book Microhydro written by Scott Davis and published by New Society Publishers. This book was released on 2003-07-01 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highly illustrated and practical, Microhydro is the first complete book on the topic in many years. Covering both AC and DC systems, it first introduces the important principles on which microhydro is based, including the advantages and disadvantages of using small amounts of water to generate power. Along with a glossary of microhydro terms, further reading and resources - including websites and commerical suppliers - Microhydro includes all the information a homeowner needs to start generating clean, off-grid, and independent power.
Download or read book Pelton Turbines written by Zhengji Zhang and published by Springer. This book was released on 2016-06-13 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concerns the theoretical foundations of hydro mechanics of Pelton turbines from a viewpoint of engineering. For reference purposes all relevant flow processes and hydraulic aspects in a Pelton turbine have been analyzed completely and systematically. The analyses especially include the quantification of all possible losses existing in the Pelton turbine and the indication of most available potential for further enhancing the system efficiency. As a guideline the book therefore supports further developments of Pelton turbines with regard to their hydraulic designs and optimizations. It is thus suitable for the development and design engineers as well as those working in the field of turbo machinery. Many laws described in the book can also be directly used to simplify aspects of computational fluid dynamics (CFD) or to develop new computational methods. The well-executed examples help better understanding the related flow mechanics.
Download or read book Hydropower written by Paul Breeze and published by Academic Press. This book was released on 2018-03-26 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydropower provides a complete discussion of the most up-to-date considerations of this method of creating renewable energy. After introducing the method's history, the author explores various considerations for engineers, planners and managers who need to determine the best placement and size of a plant. The book then presents various types of hydropower systems, such as Run-of-River Schemes and various types of Dam and Turbines, also considering the important economic, environmental and geological impacts of each. Those involved in the planning, design and management of hydropower systems, such as engineers, researchers, managers and policymakers will find this book a very valuable and insightful resource. - Explores different types of dams and turbines set alongside easy-to-understand diagrams, such as Embankment Dams, Concrete Arch Dams, Reaction Turbines and Francis Turbines - Considers various economic and environmental factors significant for this type of project, such as resettlement, biodiversity and greenhouse gases - Discusses best practices for locating a hydropower site and how to make important decisions regarding placement and method
Download or read book Experimentation Validation and Uncertainty Analysis for Engineers written by Hugh W. Coleman and published by John Wiley & Sons. This book was released on 2018-04-09 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Helps engineers and scientists assess and manage uncertainty at all stages of experimentation and validation of simulations Fully updated from its previous edition, Experimentation, Validation, and Uncertainty Analysis for Engineers, Fourth Edition includes expanded coverage and new examples of applying the Monte Carlo Method (MCM) in performing uncertainty analyses. Presenting the current, internationally accepted methodology from ISO, ANSI, and ASME standards for propagating uncertainties using both the MCM and the Taylor Series Method (TSM), it provides a logical approach to experimentation and validation through the application of uncertainty analysis in the planning, design, construction, debugging, execution, data analysis, and reporting phases of experimental and validation programs. It also illustrates how to use a spreadsheet approach to apply the MCM and the TSM, based on the authors’ experience in applying uncertainty analysis in complex, large-scale testing of real engineering systems. Experimentation, Validation, and Uncertainty Analysis for Engineers, Fourth Edition includes examples throughout, contains end of chapter problems, and is accompanied by the authors’ website www.uncertainty-analysis.com. Guides readers through all aspects of experimentation, validation, and uncertainty analysis Emphasizes the use of the Monte Carlo Method in performing uncertainty analysis Includes complete new examples throughout Features workable problems at the end of chapters Experimentation, Validation, and Uncertainty Analysis for Engineers, Fourth Edition is an ideal text and guide for researchers, engineers, and graduate and senior undergraduate students in engineering and science disciplines. Knowledge of the material in this Fourth Edition is a must for those involved in executing or managing experimental programs or validating models and simulations.
Download or read book Motors as Generators for Micro Hydro Power written by Nigel Smith and published by . This book was released on 2008 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a guide to the use of induction motors for electricity generation in remote locations. It is written as a practical handbook for engineers and technicians involved in designing and installing small water-power schemes for isolated houses and communities. This revised edition brings in new concepts developed and tested to expand the power range of application of motors as generators, to make this technology safer and more reliable, while keeping costs low and making it accessible to developing countries. It also contains a new chapter on mains-connecting micro-hydro generators. This edition also draws on the practical experience of manufacturers and installers of induction generator units working in village locations in a large number of countries, among them Sri Lanka, Nepal, Peru, Kenya and others.
Download or read book A Textbook of Hydraulic Machines written by RK Rajput and published by S. Chand Publishing. This book was released on with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written primarily for the students of Civil and Mechanical Engineering, A Textbook of Hydraulic Machines has been written in lucidly and captures the essence in an apt and non-repetitive manner. Aided by a number of solved problems, including typical examples from examination point of view, the book has been a benchmark in the subject for close to 20 years.
Download or read book Manual on Pumps Used as Turbines written by Jean-Marc Chapallaz and published by Friedr Vieweg & Sohn Verlagsgesellschaft. This book was released on 1992-01-01 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microturbines written by Claire Soares and published by Elsevier. This book was released on 2011-04-08 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small-scale gas turbines, known as Microturbines, represent an exciting new development in gas turbine technology. They can run in size from small, human-scale machines down to micro-sized mini-machines that can barely be seen by the naked eye. They also run a great diversity of fuel types, from various types of commercial gases to waste-generated gases. This new book by industry expert Claire Soares will fully describe the various types of microturbines, their applications, and their particular requirements for installation, maintenance and repair. It will explain how a microturbine the size of a refrigerator can power an entire school, hospital or small factory, which is particularly useful for onsite, remote installations. The book will also show how microturbines can be paired with one or more fuel cells to form a hybrid energy source, or can be teamed with any source of distributed power, such as a mall hydro-turbine or a wind turbine. Moreover, the reader will learn how microturbines can run on a variety of fuels that are far cruder than those required by most standard gas turbines; they can be made to run, for instance, using gas from a landfill or biomass source. The reader will find detailed information on costs, specifications, and maintenance and repair guidelines. Ample references and resources will provide the reader with tools for finding manufacturers and product specifications for their own particular needs. - Covers major categories of microturbines, including factors common to their design, installation, operation, optimization, maintenance, and repair - Invaluable guidance on market factors and economics affecting microturbines and their applications, particularly for distributed power generation - Provides current case studies showing microturbines used in hybrid systems with fuel cells and other types of power generation systems
Download or read book Water Resources Management and Reservoir Operation written by Ramakar Jha and published by Springer Nature. This book was released on 2021-09-20 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores many recent techniques including ANN, fuzzy logic, hydraulic models and IWRM utilized for integrated water resources management, a real challenge in India for obtaining high irrigation efficiency. The book deals with topics of current interest, such as climate change, floods, drought, and hydrological extremes. The impact of climate change on water resources is drawing worldwide attention these days; for water resources, many countries are already stressed and climate change along with burgeoning population, rising standard of living, and increasing demand are adding to the stress. Further, river basins are becoming less resilient to climatic vagaries. Fundamental to addressing these issues is hydrological modelling which is covered in this book Further, integrated water resources management is vital to ensure water and food security. Integral to the management is groundwater and solute transport. The book encompasses tools that will be useful to mitigate the adverse consequences of natural disasters.
Download or read book Advanced Manufacturing Systems and Innovative Product Design written by B. B. V. L. Deepak and published by Springer Nature. This book was released on 2021-02-17 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select papers presented at the Conference on Innovative Product Design and Intelligent Manufacturing System (IPDIMS 2020). The book discusses the latest methods and advanced tools from different areas of design and manufacturing technology. The main topics covered include design methodologies, industry 4.0, smart manufacturing, and advances in robotics among others. The contents of this book are useful for academics as well as professionals working in the areas of industrial design, mechatronics, robotics, and automation.
Download or read book Hydraulic Turbines written by Miroslav Nechleba and published by Prague : Artia. This book was released on 1957 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Pelton Water Wheel written by Pelton Water Wheel Company and published by . This book was released on 1898 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
