Download or read book Micro and Nanofabrication for Beginners written by Eiichi Kondoh and published by CRC Press. This book was released on 2022-06-13 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the fundamentals of micro- and nanofabrication are described on the basis of the concept of “using gases as a fabrication tool.” Unlike other books available on the subject, this volume assumes only entry-level mathematics, physics, and chemistry of undergraduates or high-school students in science and engineering courses. Necessary theories are plainly explained to help the reader learn about this new attractive field and enable further reading of specialized books. The book is an attractive guide for students, young engineers, and anyone getting involved in micro- and nanofabrication from various fields including physics, electronics, chemistry, and materials sciences.

Download or read book Micro and Nano Fabrication written by Hans H. Gatzen and published by Springer. This book was released on 2015-01-02 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: For Microelectromechanical Systems (MEMS) and Nanoelectromechanical Systems (NEMS) production, each product requires a unique process technology. This book provides a comprehensive insight into the tools necessary for fabricating MEMS/NEMS and the process technologies applied. Besides, it describes enabling technologies which are necessary for a successful production, i.e., wafer planarization and bonding, as well as contamination control.

Download or read book Introduction to Microfabrication written by Sami Franssila and published by John Wiley & Sons. This book was released on 2005-01-28 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfabrication is the key technology behind integrated circuits,microsensors, photonic crystals, ink jet printers, solar cells andflat panel displays. Microsystems can be complex, but the basicmicrostructures and processes of microfabrication are fairlysimple. Introduction to Microfabrication shows how the commonmicrofabrication concepts can be applied over and over again tocreate devices with a wide variety of structures andfunctions. Featuring: * A comprehensive presentation of basic fabrication processes * An emphasis on materials and microstructures, rather than devicephysics * In-depth discussion on process integration showing how processes,materials and devices interact * A wealth of examples of both conceptual and real devices Introduction to Microfabrication includes 250 homework problems forstudents to familiarise themselves with micro-scale materials,dimensions, measurements, costs and scaling trends. Both researchand manufacturing topics are covered, with an emphasis on silicon,which is the workhorse of microfabrication. This book will serve as an excellent first text for electricalengineers, chemists, physicists and materials scientists who wishto learn about microstructures and microfabrication techniques,whether in MEMS, microelectronics or emerging applications.

Download or read book Fundamentals of Microfabrication and Nanotechnology Three Volume Set written by Marc J. Madou and published by CRC Press. This book was released on 2018-12-14 with total page 1992 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its third edition, Fundamentals of Microfabrication and Nanotechnology continues to provide the most complete MEMS coverage available. Thoroughly revised and updated the new edition of this perennial bestseller has been expanded to three volumes, reflecting the substantial growth of this field. It includes a wealth of theoretical and practical information on nanotechnology and NEMS and offers background and comprehensive information on materials, processes, and manufacturing options. The first volume offers a rigorous theoretical treatment of micro- and nanosciences, and includes sections on solid-state physics, quantum mechanics, crystallography, and fluidics. The second volume presents a very large set of manufacturing techniques for micro- and nanofabrication and covers different forms of lithography, material removal processes, and additive technologies. The third volume focuses on manufacturing techniques and applications of Bio-MEMS and Bio-NEMS. Illustrated in color throughout, this seminal work is a cogent instructional text, providing classroom and self-learners with worked-out examples and end-of-chapter problems. The author characterizes and defines major research areas and illustrates them with examples pulled from the most recent literature and from his own work.

Download or read book Micro and Nano Fabrication Technology written by Jiwang Yan and published by Springer. This book was released on 2018-07-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on the state-of-the-art micro/nanofabrication technologies for creating miniature structures with high precision. These multidisciplinary technologies include mechanical, electrical, optical, physical, and chemical methods, as well as hybrid processes, covering subtractive and additive material manufacturing, as well as net-shape manufacturing. The materials the volume deals with include metals, alloys, semiconductors, polymers, crystals, glass, ceramics, composites, and nanomaterials. The volume is composed of 30 chapters, which are grouped into five parts. Engaging with the latest research in the field, these chapters provide important perspectives on key topics, from process developments at the shop level to scientific investigations at the academic level, offering both experimental work and theoretical analysis. Moreover, the content of this volume is highly interdisciplinary in nature, with insights from not only manufacturing technology but also mechanical/material science, optics, physics, chemistry, and more.

Download or read book Advanced Micro and Nano manufacturing Technologies written by Shrikrishna Nandkishor Joshi and published by Springer Nature. This book was released on 2021-10-01 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on the fundamentals and advancements in micro and nanomanufacturing technologies applied in the biomedical and biochemical domain. The contents of this volume provide comprehensive coverage of the physical principles of advanced manufacturing technologies and the know-how of their applications in the fabrication of biomedical devices and systems. The book begins by documenting the journey of miniaturization and micro-and nano-fabrication. It then delves into the fundamentals of various advanced technologies such as micro-wire moulding, 3D printing, lithography, imprinting, direct laser machining, and laser-induced plasma-assisted machining. It also covers laser-based technologies which are a promising option due to their flexibility, ease in control and application, high precision, and availability. These technologies can be employed to process several materials such as glass, polymers: polycarbonate, polydimethylsiloxane, polymethylmethacrylate, and metals such as stainless steel, which are commonly used in the fabrication of biomedical devices, such as microfluidic technology, optical and fiber-optic sensors, and electro-chemical bio-sensors. It also discusses advancements in various MEMS/NEMS based technologies and their applications in energy conversion and storage devices. The chapters are written by experts from the fields of micro- and nano-manufacturing, materials engineering, nano-biotechnology, and end-users such as clinicians, engineers, academicians of interdisciplinary background. This book will be a useful guide for academia and industry alike.

Download or read book Micro and Nanomanufacturing Volume II written by Mark J. Jackson and published by Springer. This book was released on 2017-10-28 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive treatment of micro and nanofabrication techniques, and applies established and research laboratory manufacturing techniques to a wide variety of materials. It is a companion volume to “Micro and Nanomanufacturing” (2007) and covers new topics such as aligned nanowire growth, molecular dynamics simulation of nanomaterials, atomic force microscopy for microbial cell surfaces, 3D printing of pharmaceuticals, microvascular coaptation methods, and more. The chapters also cover a wide variety of applications in areas such as surgery, auto components, living cell detection, dentistry, nanoparticles in medicine, and aerospace components. This is an ideal text for professionals working in the field, and for graduate students in micro and nanomanufacturing courses.

Download or read book Micro Nanofabrication written by Zheng Cui and published by Springer. This book was released on 2010-10-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a collection of the author’s years of experience and research findings, as well as the latest development, in micro-nanofabrication technologies. It gives a detailed introduction on the basics of micro-nanofabrication, including optical lithography, electron beam lithography, focused ion beam technique, X-ray lithography, various etching and replication techniques. For each of the fabrication technology it introduces, the emphasis is on clear explanation of the basic principle, the essential steps in the processes, various process conditions and typical process parameters. The advantages and disadvantages of each technique are also analysed. The applications of micro-nanofabrication technologies focus on manufacturing of very large scale integrated circuits (VLSI), nanoelectronics, optoelectronics, high density magnetic storage, micro-electro-mechanical system or MEMS, biochip or lab-on-chip and nanotechnology. Each of the applications is accompanied by practical examples to demonstrate how particular fabrication techniques are applied. There is an extensive list of references following each chapter for readers to explore further. The book is not only a good supplementary reading material for university undergraduates or postgraduates who are novices in this field, but also a good reference book for experienced engineering professionals who wish to know other fabrication techniques outside their own field.

Download or read book Micro and Nano Techniques for the Handling of Biological Samples written by Jaime Castillo-León and published by CRC Press. This book was released on 2011-08-25 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several micro- and nanomanipulation techniques have emerged in recent decades thanks to advances in micro- and nanofabrication. For instance, the atomic force microscope (AFM) uses a nano-sized tip to image, push, pull, cut, and indent biological material in air, liquid, or vacuum. Using micro- and nanofabrication techniques, scientists can make manipulation tools, such as microgrippers and nanotweezers, on the same length scale as the biological samples. Micro and Nano Techniques for the Handling of Biological Samples reviews the different techniques available to manipulate and integrate biological materials in a controlled manner, either by sliding them along a surface (2-D manipulation), or by gripping and moving them to a new position (3-D manipulation). The advantages and drawbacks are mentioned together with examples that reflect the state-of-the-art in manipulation techniques for biological samples. Thanks to the advances in micro- and nanomanipulation techniques, the integration of biomaterials with physical transducers has been possible, giving rise to new and highly sensitive biosensing devices. Although great progress has been made, challenges are still present. To understand the complex interactions between and inside biological samples, scientists will always be working on improving technologies to manipulate, transport, sort, and integrate samples in different environments. Balanced between simplicity for the beginner and hardcore theory for the more advanced readers, this book is the ideal launching point for sharpening the scientific tools required to address these challenges.

Download or read book Nanofabrication written by Maria Stepanova and published by Springer Science & Business Media. This book was released on 2011-11-08 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intended to update scientists and engineers on the current state of the art in a variety of key techniques used extensively in the fabrication of structures at the nanoscale. The present work covers the essential technologies for creating sub 25 nm features lithographically, depositing layers with nanometer control, and etching patterns and structures at the nanoscale. A distinguishing feature of this book is a focus not on extension of microelectronics fabrication, but rather on techniques applicable for building NEMS, biosensors, nanomaterials, photonic crystals, and other novel devices and structures that will revolutionize society in the coming years.

Download or read book Electrospinning Nanofabrication and Applications written by Bin Ding and published by William Andrew. This book was released on 2018-11-12 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrospinning: Nanofabrication and Applications presents an overview of the electrospinning technique, nanofabrication strategies and potential applications. The book begins with an introduction to the fundamentals of electrospinning, discussing fundamental principles of the electrospinning process, controlling parameters, materials and structures. Nanofabrication strategies, including coaxial electrospinning, multi-needle electrospinning, needleless electrospinning, electro-netting, near-field electrospinning, and three-dimensional macrostructure assembling are also covered. Final sections explore the applications of electrospun nanofibers in different fields and future prospects. This is a valuable reference for engineers and materials scientist working with fibrous materials and textiles, as well as researchers in the areas of nanotechnology, electrospinning, nanofibers and textiles. - Explores controllable fabrication of electrospun nanomaterials and their multifunctional applications - Explains the electrospinning technique as used in nanofabrication and nanofibers - Outlines the applications of electrospun nanofibrous materials in tissue engineering, filtration, oil-water separation, water treatment, food technology, supercapacitors, sensors and so on

Download or read book Nanofabrication written by Zheng Cui and published by Springer Science & Business Media. This book was released on 2009-01-01 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with the most up-to-date information and development in the Nanofabrication area. It presents a one-stop description at the introduction level on most of the technologies that have been developed which are capable of making structures below 100nm. Principles of each technology are introduced and illustrated with minimum mathematics involved. The book serves as a practical guide and first hand reference for those working in nanostructure fabrication.

Download or read book Tip Based Nanofabrication written by Ampere A. Tseng and published by Springer Science & Business Media. This book was released on 2011-07-25 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofabrication is critical to the realization of potential benefits in the field of electronics, bioengineering and material science. One enabling technology in nanofabrication is Tip-Based Nanofabrication, which makes use of functionalized micro-cantilevers with nanoscale tips. Tip-Based Nanofabrication: Fundamentals and Applications discusses the development of cantilevered nanotips and how they evolved from scanning probe microscopy and are able to manipulate environments at nanoscale on substrates generating different nanoscale patterns and structures. Also covered are the advantages of ultra-high resolution capability, how to use tip based nanofabrication technology as a tool in the manufacturing of nanoscale structures, single-probe tip technologies, multiple-probe tip methodology, 3-D modeling using tip based nanofabrication and the latest in imaging technology.

Download or read book Nano and Microfabrication for Industrial and Biomedical Applications written by Regina Luttge and published by William Andrew. This book was released on 2016-06-12 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nano- and Microfabrication for Industrial and Biomedical Applications, Second Edition, focuses on the industrial perspective on micro- and nanofabrication methods, including large-scale manufacturing, the transfer of concepts from lab to factory, process tolerance, yield, robustness, and cost. The book gives a history of miniaturization and micro- and nanofabrication, and surveys industrial fields of application, illustrating fabrication processes of relevant micro and nano devices. In this second edition, a new focus area is nanoengineering as an important driver for the rise of novel applications by integrating bio-nanofabrication into microsystems. In addition, new material covers lithographic mould fabrication for soft-lithography, nanolithography techniques, corner lithography, advances in nanosensing, and the developing field of advanced functional materials. Luttge also explores the view that micro- and nanofabrication will be the key driver for a "tech-revolution" in biology and medical research that includes a new case study that covers the developing organ-on-chip concept. - Presents an interdisciplinary approach that makes micro/nanofabrication accessible equally to engineers and those with a life science background, both in academic settings and commercial R&D - Provides readers with guidelines for assessing the commercial potential of any new technology based on micro/nanofabrication, thus reducing the investment risk - Updated edition presents nanoengineering as an important driver for the rise of novel applications by integrating bio-nanofabrication into microsystems

Download or read book Nanofabrication and Biosystems written by Harvey C. Hoch and published by Cambridge University Press. This book was released on 1996-07-13 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book also aims to stimulate innovative, productive interactions among materials scientists, engineers, and biologists, and to explore ways in which materials scientists and engineers can exploit biological principles and biological assemblies to produce new and ever smaller devices.

Download or read book Micro Nano Manufacturing written by Hans Nørgaard Hansen and published by MDPI. This book was released on 2018-07-03 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Micro/Nano Manufacturing" that was published in Micromachines

Download or read book Laser Micro Nano Manufacturing and 3D Microprinting written by Anming Hu and published by Springer Nature. This book was released on 2020-11-28 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the latest advances in laser techniques for micro-nano-manufacturing and an in-depth analysis of applications, such as 3D printing and nanojoining. Lasers have gained increasing significance as a precise tool for advanced manufacturing. Written by world leading scientists, the first part of the book presents the fundamentals of laser interaction with materials at the micro- and nanoscale, including multiphoton excitation and nonthermal melting, and allows readers to better understand advanced processing. In the second part, the authors focus on various advanced fabrications, such as laser peening, surface nanoengineering, and plasmonic heating. Finally, case studies are devoted to special applications, such as 3D printing, microfluidics devices, energy devices, and plasmonic and photonic waveguides. This book integrates both theoretical and experimental analysis. The combination of tutorial chapters and concentrated case studies will be critically attractive to undergraduate and graduate students, researchers, and engineers in the relevant fields. Readers will grasp the full picture of the application of laser for micro-nanomanufacturing and 3D printing.