Download or read book Micro and Nanoelectromechanical Biosensors written by Liviu Nicu and published by John Wiley & Sons. This book was released on 2014-01-17 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most books dedicated to the issues of bio-sensing are organized by the well-known scheme of a biosensor. In this book, the authors have deliberately decided to break away from the conventional way of treating biosensing research by uniquely addressing biomolecule immobilization methods on a solid surface, fluidics issues and biosensing-related transduction techniques, rather than focusing simply on the biosensor. The aim is to provide a contemporary snapshot of the biosensing landscape without neglecting the seminal references or products where needed, following the downscaling (from the micro- to the nanoscale) of biosensors and their respective best known applications. To conclude, a brief overview of the most popularized nanodevices applied to biology is given, before comparing biosensor criteria in terms of targeted applications.
Download or read book Biosensors written by Toonika Rinken and published by BoD – Books on Demand. This book was released on 2015-09-24 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, the implementation of novel technological platforms in biosensor-based developments is primarily directed to the miniaturization of analytical systems and lowering the limits of detection. Rapid scientific and technological progress enables the application of biosensors for the online detection of minute concentrations of different chemical compounds in a wide selection of matrixes and monitoring extremely low levels of biomarkers even in living organisms and individual cells. This book, including 16 chapters, characterizes the present state of the art and prospective options for micro and nanoscale activities in biosensors construction and applications.
Download or read book Micro Nano Cell and Molecular Sensors written by Ping Wang and published by Springer. This book was released on 2016-12-01 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on cell- and molecule-based biosensors using micro/nano devices as transducers. After providing basic information on micro/nano cell- and molecule-based biosensors, it introduces readers to the basic structures and properties of micro/nano materials and their applications. The topics covered provide a comprehensive review of the current state of the art in micro/nano cell- and molecule-based biosensors as well as their future development trends, ensuring the book will be of great interest to the interdisciplinary community active in this area: researchers, engineers, biologists, medical scientists, and all those whose work involves related interdisciplinary research and applications. Dr. Ping Wang is a Professor in Department of Biomedical Engineering at Zhejiang University, Hangzhou, China. Dr. Chunsheng Wu is a Professor in Medical School at Xi’an Jiaotong University, Xi’an, China. Dr. Ning Hu is an Assistant researcher in Department of Biomedical Engineering at Zhejiang University and a Postdoctoral researcher in Medical School at Harvard University, Boston, USA. Dr. K. Jimmy Hsia is a Professor in Department of Biomedical Engineering at Carnegie Mellon University, Pittsburgh, USA.
Download or read book Nanobiotechnology for Sensing Applications written by Ajeet Kumar Kaushik and published by CRC Press. This book was released on 2016-11-03 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the potential of nanosystems as a multidisciplinary science with the aim of the design and development of smart sensing technologies using micro/nano electrodes and novel nanosensing material. It discusses their integration with MEMS, miniaturized transduction systems, novel sensing strategies, and wearable sensors performing at POC for diagnostics and personalized health care monitoring. It presents basic concepts pertaining to nanobiosensor fabrication, developments in the field of smart nanomaterials, nano-enabling technologies, micro-nano hybrind platforms, and their applications in healthcare.
Download or read book Nanomaterials for Biosensors written by Bansi D. Malhotra and published by William Andrew. This book was released on 2017-10-26 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials for Biosensors: Fundamentals and Applications provides a detailed summary of the main nanomaterials used in biosensing and their application. It covers recent developments in nanomaterials for the fabrication of biosensor devices for healthcare diagnostics, food freshness and bioprocessing. The various processes used for synthesis and characterization of nanostructured materials are examined, along with the design and fabrication of bioelectronic devices using nanostructured materials as building blocks. Users will find the fundamentals of the main nanomaterials used in biosensing, helping them visualize a systematic and coherent picture of how nanomaterials are used in biosensors. The book also addresses the role of bio-conjugation of nanomaterials in the construction of nano-biointerfaces for application in biosensors. Such applications, including metal nanoparticles, metal oxide nanoparticles, nanocomposites, carbon nanotubes, conducting polymers and plasmonic nanostructures in biosensing are discussed relative to each nanomaterial concerned. Finally, recent advancements in protein functionalized nanomaterials for cancer diagnostics and bio-imaging are also included. Provides a detailed study on how nanomaterials are used to enhance sensing capabilities in biosensors Explains the properties, characterization methods and preparation techniques of the nanomaterials used in biosensing Arranged in a material-by-material way, making it clear how each nanomaterial should be used
Download or read book Nanotechnology and Biosensors written by Dimitrios P Nikolelis and published by Elsevier. This book was released on 2018-06-27 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology and Biosensors shows how nanotechnology is used to create affordable, mass-produced, portable, small sized biosensors to directly monitor environmental pollutants. In addition, it provides information on their integration into components and systems for mass market applications in food analysis, environmental monitoring and health diagnostics. Nanotechnology has led to a dramatic improvement in the performance, sensitivity and selectivity of biosensors. As metal-oxide and carbon nanostructures, gold and magnetite nanoparticles, and the integration of dendrimers in biosensors using nanotechnology have contributed greatly in making biosensors more effective and affordable on a mass-market level, this book presents a timely resource on the topic. Highlights nanotechnology-based approaches to the detection of enzyme inhibitors, direct enzymatic and microbial detection of metabolites, and nutrients using biosensors Includes examples on how nanotechnology has lead to improvements in the construction of portable, selective and sensitive biosensing devices Offers thorough coverage of biomarker/biosensor interaction for the rapid detection of toxicants and pollutants
Download or read book Molecular Sensors and Nanodevices written by John X. J. Zhang and published by William Andrew. This book was released on 2013-12-03 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: With applications ranging from medical diagnostics to environmental monitoring, molecular sensors (also known as biosensors, chemical sensors, or chemosensors), along with emerging nanotechnologies offer not only valuable tools but also unlimited possibilities for engineers and scientists to explore the world. New generation of functional microsystems can be designed to provide a variety of small scale sensing, imaging and manipulation techniques to the fundamental building blocks of materials. This book provides comprehensive coverage of the current and emerging technologies of molecular sensing, explaining the principles of molecular sensor design and assessing the sensor types currently available. Having explained the basic sensor structures and sensing principles, the authors proceed to explain the role of nano/micro fabrication techniques in molecular sensors, including MEMS, BioMEMS, MicroTAS among others. The miniaturization of versatile molecular sensors opens up a new design paradigm and a range of novel biotechnologies, which is illustrated through case studies of groundbreaking applications in the life sciences and elsewhere. As well as the techniques and devices themselves, the authors also cover the critical issues of implantability, biocompatibility and the regulatory framework. The book is aimed at a broad audience of engineering professionals, life scientists and students working in the multidisciplinary area of biomedical engineering. It explains essential principles of electrical, chemical, optical and mechanical engineering as well as biomedical science, intended for readers with a variety of scientific backgrounds. In addition, it will be valuable for medical professionals and researchers. An online tutorial developed by the authors provides learning reinforcement for students and professionals alike. Reviews of state-of-the-art molecular sensors and nanotechnologies Explains principles of sensors and fundamental theories with homework problems at the end of each chapter to facilitate learning Demystifies the vertical integration from nanomaterials to devices design Covers practical applications the recent progress in state-of-the-art sensor technologies Includes case studies of important commercial products Covers the critical issues of implantability, biocompatibility and the regulatory framework
Download or read book Biosensors written by M Lambrechts and published by CRC Press. This book was released on 2021-06-24 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biosensors are analytical devices that combine a biologically sensitive element with a physical or chemical transducer to selectively and quantitatively detect the presence of specific compounds. Balancing basics, principles, and case studies, Biosensors: Microelectrochemical Devices covers the theory and applications of one class of biosensor-microelectrochemical devices. The book clearly explains microelectronic techniques used to produce these cheap, fast reacting, and disposable sensors with the aid of helpful diagrams and tables. Researchers and postgraduates active in the field of chemical sensors, analytical chemistry, or microelectronics will find this an invaluable reference.
Download or read book Macro Micro and Nano Biosensors written by Mahendra Rai and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes an international group of researchers who present the latest achievements in the field of enzyme, immune system, and microbial and nano-biosensors. It highlights the experimental evidence for formation of biological fuel cells (BFCs)-which has a dual purpose - as a device that produces electricity and the systems which produce it simultaneously cleaning up the environment from polluting organic compounds. Considering the work in the field of macro, micro and nano-biosensors, considerable attention is paid to the use of nanomaterials for the modification of working electrodes. Nanomaterials in some cases can significantly improve the parameters of analytical systems. Readers will be interested in the projection of the presented theoretical and experimental materials in the field of practical application of modern analytical developments. The presented results in many cases imply the possibility of using the created models of macro, micro and nano-biosensors, and biofuel elements in the field of health, and protection/restoration of the environment. It includes information about all existing types of transducers of signals in biosensors - electrochemical, optical and quantum-optics, thermoelectric, data of atomic force microscopy, piezoelectric, and more. On the basis of these principles, descriptions are given about the functioning of macro, micro and nano- biosensors for the detection of compounds used in medicine, detection of compounds that clog the environment, and thus affect human health, for compounds that are potentially the basis for the production of drugs, for the selection of compounds that have medicinal activity, for immunodetection, and to assess the quality of food. These questions form the basis of research carried out in the field of biosensors in the world. Since the described models of biosensors have high sensitivity, high measurement speed and selectivity, the described results attract the attention of both the ordinary reader and business class specialists who create and implement analytical technologies. This book is very useful for researchers in life sciences, chemical sciences, physics, and engineering. In addition, it will be useful for the persons working in industry. Advanced technologies specialists will be attracted by the novelty of the proposed solutions and their relevance and ease of implementation. Since the studies contain sections describing the parameters of different biosensors, BFCs, they are easily navigated into assessing the effectiveness of the practical use of the proposed device. The relevant sections indicate such characteristics as detection ranges, life span, type of biological material used, the method of formation of the bio-receptor part. These parameters are of interest to both developers of new models of biosensors and BFC, and their manufacturers.
Download or read book Mems for Biomedical Applications written by Shekhar Bhansali and published by Elsevier. This book was released on 2012-07-18 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of Micro Electro Mechanical Systems (MEMS) in the biomedical field is leading to a new generation of medical devices. MEMS for biomedical applications reviews the wealth of recent research on fabrication technologies and applications of this exciting technology.The book is divided into four parts: Part one introduces the fundamentals of MEMS for biomedical applications, exploring the microfabrication of polymers and reviewing sensor and actuator mechanisms. Part two describes applications of MEMS for biomedical sensing and diagnostic applications. MEMS for in vivo sensing and electrical impedance spectroscopy are investigated, along with ultrasonic transducers, and lab-on-chip devices. MEMS for tissue engineering and clinical applications are the focus of part three, which considers cell culture and tissue scaffolding devices, BioMEMS for drug delivery and minimally invasive medical procedures. Finally, part four reviews emerging biomedical applications of MEMS, from implantable neuroprobes and ocular implants to cellular microinjection and hybrid MEMS.With its distinguished editors and international team of expert contributors, MEMS for biomedical applications provides an authoritative review for scientists and manufacturers involved in the design and development of medical devices as well as clinicians using this important technology. Reviews the wealth of recent research on fabrication technologies and applications of Micro Electro Mechanical Systems (MEMS) in the biomedical field Introduces the fundamentals of MEMS for biomedical applications, exploring the microfabrication of polymers and reviewing sensor and actuator mechanisms Considers MEMS for biomedical sensing and diagnostic applications, along with MEMS for in vivo sensing and electrical impedance spectroscopy
Download or read book Biosensors Nanotechnology written by Ashutosh Tiwari and published by John Wiley & Sons. This book was released on 2014-06-26 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides detailed reviews of a range of nanostructures used in the construction of biosensors as well as the applications of these biosensor nanotechnologies in the biological, chemical, and environmental monitoring fields Biological sensing is a fundamental tool for understanding living systems, but also finds practical application in medicine, drug discovery, process control, food safety, environmental monitoring, defense, and personal security. Moreover, a deeper understanding of the bio/electronic interface leads us towards new horizons in areas such as bionics, power generation, and computing. Advances in telecommunications, expert systems, and distributed diagnostics prompt us to question the current ways we deliver healthcare, while robust industrial sensors enable new paradigms in R&D and production. Despite these advances, there is a glaring absence of suitably robust and convenient sensors for body chemistries. This book examines some of the emerging technologies that are fueling scientific discovery and underpinning new products to enhance the length and quality of our lives. The 14 chapters written by leading experts cover such topics as: ZnO and graphene microelectrode applications in biosensing Assembly of polymers/metal nanoparticles Gold nanoparticle-based electrochemical biosensors Impedimetric DNA sensing employing nanomaterials Graphene and carbon nanotube-based biosensors Computational nanochemistry study of the BFPF green fluorescent protein chromophore Biosynthesis of metal nanoparticles Bioconjugated-nanoporous gold films in electrochemical biosensors The combination of molecular imprinting and nanotechnology Principles and properties of multiferroics and ceramics
Download or read book Nano Micro Biosensors for Biomedical Applications written by Jin-Ho Lee and published by . This book was released on 2024-02-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in nano/microtechnologies have significantly enhanced biosensors in terms of their viability for biomedical purposes, from diagnostic to therapeutic applications, and enabled the development of effective early detection and personalized treatment modalities. Specifically, the introduction of a variety of nano/microtechnologies has offered new opportunities to improve the sensitivity, selectivity, response time, and biocompatibility of biosensors through outstanding physical, chemical, electrical and electrochemical properties. Of great interest, this Special Issue aims to highlight the most recent and promising nano/microtechnologies utilized in the development of biosensors for biomedical applications. Thus, here we cordially organize 10 original research papers and reviews aligned with these themes that present novel approaches to the development of next-generation biosensors for biomedical applications.
Download or read book The Physics Behind and Biosensing Applications of Resonant Micro and Nanomechanical Sensors written by Philip Sutton Waggoner and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research presented herein focuses on the use of micro- and nanoelectromechanical systems (MEMS/NEMS) as mechanical resonators employed as sensors. The thesis describes the physical mechanisms underlying their use as sensors and demonstrates their utility in biosensing applications. This field is developing in the wake of the inception and widespread propagation of MEMS devices and scanned probe microscopies like atomic force or scanning tunneling microscopy. Recently there has been growing interest in their application to biological systems and the detection of low concentrations of biomolecules, where they could enable novel or deeper understandings of these systems or the onset and progression of disease. In order to push the limits of sensitivity to such levels, a full understanding of the sensing mechanisms is needed which, once attained, will shed light on appropriate sensor design parameters, materials, functional pattering, and the use of higher resonant modes. Two key themes that emerge from this work are the effect of device geometry and device optimization for use as biosensors. Especially important are the demonstrated applications of non-cantilever geometries and the results suggesting that these devices are also more sensitive and quantitative than cantilevers when the number of bound analytes on a device becomes very small. For biosensing applications, a "secondary mass labeling" technique has been developed that greatly improves device sensitivity to lightweight biomolecules specifically bound to the resonant sensors by effectively amplifying the mass of the analyte. After motivating the use of these sensors and providing a detailed discussion of the technology in general in Chapters 1 and 2, the experimental details of device fabrication and use are described in Chapter 3. Chapter 4 features in-depth discussion of the mathematical derivations and physics underlying the operation of these devices as sensors. Then in Chapter 5, the preparation of these devices for biosensing is described, and two realistic examples are demonstrated for the detection of prion proteins and prostate specific antigen. Together with the high device yield and rapid readout of devices, the results presented herein show great promise for real applications of this technology in medicine or other applications.
Download or read book Biosensing with Silicon written by Enakshi Bhattacharya and published by Springer Nature. This book was released on 2022-01-01 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses two silicon biosensors: an electrochemical sensor – the Electrolyte Insulator Silicon Capacitor (EISCAP), and a mechanical resonant cantilever sensor. The author presents the principle and the technology behind the device fabrication and miniaturization, stable and reproducible functionalization protocols for bioreceptor immobilization, and the measurement and the data analysis for extracting the best performance from these sensors. EISCAP sensors, used for the estimation of triglycerides and urea, have been improved through the use of micromachining processes. The miniaturization brought out advantages as well as challenges which are discussed in this book, resulting in a prototype mini-EISCAP with a readout circuit for fast and accurate estimation of triglycerides. The author also reports on the sensitivity improvements in the estimation of triglycerides and urea obtained with the polycrystalline silicon cantilever and its measurements in liquid media. The book is ideal for materials scientists and engineers working in the field of biosensors and MicroElectroMechanical systems (MEMS) and their optimizations, as well as researchers with biochemical or biomedical expertise, in order to have a fresh and updated review on the last progresses reached with EISCAPs and cantilever sensors.
Download or read book Engineering of Micro Nano Biosystems written by Gregory Barbillon and published by Springer. This book was released on 2019-08-02 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This tutorial book offers an in-depth overview of the fundamental principles of micro/nano technologies and devices related to sensing, actuation and diagnosis in fluidics and biosystems. Research in the MEMS/NEMS and lab-on-chip fields has seen rapid growth in both academic and industrial domains, as these biodevices and systems are increasingly replacing traditional large size diagnostic tools. This book is unique in describing not only the devices and technologies but also the basic principles of their operation. The comprehensive description of the fabrication, packaging and principles of micro/nano biosystems presented in this book offers guidance for researchers designing and implementing these biosystems across diverse fields including medical, pharmaceutical and biological sciences. The book provides a detailed overview of the fundamental mechanical, optical, electrical and magnetic principles involved, together with the technologies required for the design, fabrication and characterization of micro/nano fluidic systems and bio-devices. Written by a collaborative team from France and Korea, the book is suitable for academics, researchers, advanced level students and industrial manufacturers.
Download or read book Optical Biosensors written by Frances S. Ligler and published by Elsevier. This book was released on 2011-10-13 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical Biosensors, Second Edition describes the principles of successful systems, examples of applications, and evaluates the advantages and deficiencies of each. It also addresses future developments on two levels: possible improvements in existing systems and emerging technologies that could provide new capabilities in the future. The book is formatted for ease of use and is therefore suitable for scientists and engineers, students and researcher at all levels in the field. Comprehensive analysis and review of the underlying principles by optical biosensors Updates and informs on all the latest developments and hot topic areas Evaluates current methods showing the advantages and disadvantages of various systems involved
Download or read book Swift Ion Beam Analysis in Nanosciences written by Denis Jalabert and published by John Wiley & Sons. This book was released on 2017-08-07 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Swift ion beam analysis (IBA) of materials and their surfaces has been widely applied to many fields over the last half century, constantly evolving to meet new requirements and to take advantage of developments in particle detection and data treatment. Today, emerging fields in nanosciences introduce extreme demands to analysis methods at the nanoscale. This book addresses how analysis with swift ion beams is rising to meet such needs. Aimed at early stage researchers and established researchers wishing to understand how IBA can contribute to their analytical requirements in nanosciences, the basics of the interactions of charged particles with matter, as well as the operation of the relevant equipment, are first presented. Many recent examples from nanoscience research are then explored in which the specific analytical capabilities of IBA are emphasized, together with the place of IBA alongside the wealth of other analytical methods.
