Download or read book Micro Nanotribology and Its Applications written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 1997-01-31 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro/nanotribology as a field is concerned with experimental and theoretical investigations of processes ranging from atomic and molecular scales to the microscale, occurring during adhesion, friction, wear, and thin-film lubrication at sliding surfaces. As a field it is truly interdisciplinary, but this confronts the would-be entrant with the difficulty of becoming familiar with the basic theories and applications: the area is not covered in any undergraduate or graduate scientific curriculum. The present work commences with a history of tribology and micro/nanotribology, followed by discussions of instrumentation, basic theories of friction, wear and lubrication on nano- to microscales, and their industrial applications. A variety of research instruments are covered, including a variety of scanning probe microscopes and surface force apparatus. Experimental research and modelling are expertly dealt with, the emphasis throughout being applied aspects.

Download or read book Index of Conference Proceedings written by British Library. Document Supply Centre and published by . This book was released on 1996 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ULSI Science and Technology 1997 written by Hisham Z. Massoud and published by The Electrochemical Society. This book was released on 1997 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamental Principles of Optical Lithography written by Chris Mack and published by John Wiley & Sons. This book was released on 2011-08-10 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fabrication of an integrated circuit requires a variety of physical and chemical processes to be performed on a semiconductor substrate. In general, these processes fall into three categories: film deposition, patterning, and semiconductor doping. Films of both conductors and insulators are used to connect and isolate transistors and their components. By creating structures of these various components millions of transistors can be built and wired together to form the complex circuitry of modern microelectronic devices. Fundamental to all of these processes is lithography, ie, the formation of three-dimensional relief images on the substrate for subsequent transfer of the pattern to the substrate. This book presents a complete theoretical and practical treatment of the topic of lithography for both students and researchers. It comprises ten detailed chapters plus three appendices with problems provided at the end of each chapter. Additional Information: Visiting http://www.lithoguru.com/textbook/index.html enhances the reader's understanding as the website supplies information on how you can download a free laboratory manual, Optical Lithography Modelling with MATLAB®, to accompany the textbook. You can also contact the author and find help for instructors.

Download or read book Proceedings written by and published by . This book was released on 1996 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Future Energy Conferences and Symposia written by and published by . This book was released on 1995 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Japanese Journal of Applied Physics written by and published by . This book was released on 1996 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metrology Inspection and Process Control for Microlithography written by and published by . This book was released on 1996 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book JJAP written by and published by . This book was released on 1996 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings in Print written by and published by . This book was released on 1996 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Characterization of Porous Solids VII written by Philip Llewellyn and published by Elsevier. This book was released on 2006-08-07 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 7th International Symposium on the Characterization of Porous Solids (COPS-VII) was held in the Congress Centre in Aix-en-Provence between the 25th-28th May 2005. The symposium covered recent results of fundamental and applied research on the characterization of porous solids. Papers relating to characterization methods such as gas adsorption and liquid porosimetry, X-ray techniques and microscopic measurements as well as the corresponding molecular modelling methods were given. These characterization methods were shown to be applied to all types of porous solids such as clays, carbons, ordered mesoporous materials, porous glasses, oxides, zeolites and metal organic frameworks. * 36 oral presentations and 166 posters and around 230 guests from 27 countries. * A large part of this symposium was devoted to the use computational methods to characterise porous solids

Download or read book Nonequilibrium Gas Dynamics and Molecular Simulation written by Iain D. Boyd and published by Cambridge University Press. This book was released on 2017-03-23 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: 7.1 Introduction -- 7.2 Rotational Energy Exchange Models -- 7.2.1 Constant Collision Number -- 7.2.2 The Parker Model -- 7.2.3 Variable Probability Exchange Model of Boyd -- 7.2.4 Nonequilibrium Direction Dependent Model -- 7.2.5 Model Results -- 7.3 Vibrational Energy Exchange Models -- 7.3.1 Constant Collision Number -- 7.3.2 The Millikan-White Model -- 7.3.3 Quantized Treatment for Vibration -- 7.3.4 Model Results -- 7.4 Dissociation Chemical Reactions -- 7.4.1 Total Collision Energy Model -- 7.4.2 Redistribution of Energy Following a Dissociation Reaction -- 7.4.3 Vibrationally Favored Dissociation Model -- 7.5 General Chemical Reactions -- 7.5.1 Reaction Rates and Equilibrium Constant -- 7.5.2 Backward Reaction Rates in DSMC -- 7.5.3 Three-Body Recombination Reactions -- 7.5.4 Post-Reaction Energy Redistribution and General Implementation -- 7.5.5 DSMC Solutions for Reacting Flows -- 7.6 Summary -- Appendix A: Generating Particle Properties -- Appendix B: Collisional Quantities -- Appendix C: Determining Post-Collision Velocities -- Appendix D: Macroscopic Properties -- Appendix E: Common Integrals -- References -- Index

Download or read book Handbook of Essential Oils written by K. Husnu Can Baser and published by CRC Press. This book was released on 2009-12-28 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: Egyptian hieroglyphs, Chinese scrolls, and Ayurvedic literature record physicians administering aromatic oils to their patients. Today society looks to science to document health choices and the oils do not disappoint. The growing body of evidence of their efficacy for more than just scenting a room underscores the need for production standards, quality control parameters for raw materials and finished products, and well-defined Good Manufacturing Practices. Edited by two renowned experts, the Handbook of Essential Oils covers all aspects of essential oils from chemistry, pharmacology, and biological activity, to production and trade, to uses and regulation. Bringing together significant research and market profiles, this comprehensive handbook provides a much-needed compilation of information related to the development, use, and marketing of essential oils, including their chemistry and biochemistry. A select group of authoritative experts explores the historical, biological, regulatory, and microbial aspects. This reference also covers sources, production, analysis, storage, and transport of oils as well as aromatherapy, pharmacology, toxicology, and metabolism. It includes discussions of biological activity testing, results of antimicrobial and antioxidant tests, and penetration-enhancing activities useful in drug delivery. New information on essential oils may lead to an increased understanding of their multidimensional uses and better, more ecologically friendly production methods. Reflecting the immense developments in scientific knowledge available on essential oils, this book brings multidisciplinary coverage of essential oils into one all-inclusive resource.

Download or read book Who s Who in Science and Engineering 2008 2009 written by Who's Who Marquis and published by . This book was released on 2007-12 with total page 2472 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of an International Conference on Solid to Solid Phase Transformations in Inorganic Materials 2005 written by and published by . This book was released on 2005 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanomaterials and Nanochemistry written by C. Bréchignac and published by Springer Science & Business Media. This book was released on 2008-01-01 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is a brilliant book that covers the major aspects of nanomaterials production. It integrates the many and varied chemical, material and thermo-dynamical facets of production, offering readers a new and unique approach to the subject. The mechanical, optical, and magnetic characteristics of nanomaterials are also presented in detail. Nanomaterials are a fast developing field of research and this book serves as both a reference work for researchers and a textbook for graduate students.

Download or read book Who s who in European Research and Development written by and published by . This book was released on 1997 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: