Download or read book X Ray Spectroscopy with Synchrotron Radiation written by Stephen P. Cramer and published by Springer Nature. This book was released on 2020-11-19 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synchrotron radiation has been a revolutionary and invaluable research tool for a wide range of scientists, including chemists, biologists, physicists, materials scientists, geophysicists. It has also found multidisciplinary applications with problems ranging from archeology through cultural heritage to paleontology. The subject of this book is x-ray spectroscopy using synchrotron radiation, and the target audience is both current and potential users of synchrotron facilities. The first half of the book introduces readers to the fundamentals of storage ring operations, the qualities of the synchrotron radiation produced, the x-ray optics required to transport this radiation, and the detectors used for measurements. The second half of the book describes the important spectroscopic techniques that use synchrotron x-rays, including chapters on x-ray absorption, x-ray fluorescence, resonant and non-resonant inelastic x-ray scattering, nuclear spectroscopies, and x-ray photoemission. A final chapter surveys the exciting developments of free electron laser sources, which promise a second revolution in x-ray science. Thanks to the detailed descriptions in the book, prospective users will be able to quickly begin working with these techniques. Experienced users will find useful summaries, key equations, and exhaustive references to key papers in the field, as well as outlines of the historical developments in the field. Along with plentiful illustrations, this work includes access to supplemental Mathematica notebooks, which can be used for some of the more complex calculations and as a teaching aid. This book should appeal to graduate students, postdoctoral researchers, and senior scientists alike.
Download or read book X Ray Absorption and X Ray Emission Spectroscopy 2 Volume Set written by Jeroen A. van Bokhoven and published by John Wiley & Sons. This book was released on 2016-03-21 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-Ray Absorption and X-ray Emission Spectroscopy: Theory and Applications During the last two decades, remarkable and often spectacular progress has been made in the methodological and instrumental aspects of x-ray absorption and emission spectroscopy. This progress includes considerable technological improvements in the design and production of detectors especially with the development and expansion of large-scale synchrotron reactors All this has resulted in improved analytical performance and new applications, as well as in the perspective of a dramatic enhancement in the potential of x-ray based analysis techniques for the near future. This comprehensive two-volume treatise features articles that explain the phenomena and describe examples of X-ray absorption and emission applications in several fields, including chemistry, biochemistry, catalysis, amorphous and liquid systems, synchrotron radiation, and surface phenomena. Contributors explain the underlying theory, how to set up X-ray absorption experiments, and how to analyze the details of the resulting spectra. X-Ray Absorption and X-ray Emission Spectroscopy: Theory and Applications: Combines the theory, instrumentation and applications of x-ray absorption and emission spectroscopies which offer unique diagnostics to study almost any object in the Universe. Is the go-to reference book in the subject for all researchers across multi-disciplines since intense beams from modern sources have revolutionized x-ray science in recent years Is relevant to students, postdocurates and researchers working on x-rays and related synchrotron sources and applications in materials, physics, medicine, environment/geology, and biomedical materials
Download or read book Principles and Practice of X Ray Spectrometric Analysis written by E.P. Bertin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first edition of this book was published early in 1970, three major developments have occurred in the field of x-ray spectrochemical analysis. First, wavelength-dispersive spectrometry, in 1970 already securely established among instrumental analytical methods, has matured. Highly sophisticated, miniaturized, modular, solid-state circuitry has replaced elec tron-tube circuitry in the readout system. Computers are now widely used to program and control fully automated spectrometers and to store, process, and compute analytical concentrations directly and immediately from ac cumulated count data. Matrix effects have largely yielded to mathematical treatment. The problems associated with the ultralong-wavelength region have been largely surmounted. Indirect (association) methods have extended the applicability of x-ray spectrometry to the entire periodic table and even to certain classes of compounds. Modern commercial, computerized, auto matic, simultaneous x-ray spectrometers can index up to 60 specimens in turn into the measurement position and for each collect count data for up to 30 elements and read out the analytical results in 1--4 min-all corrected for absorption-enhancement and particle-size or surface-texture effects and wholly unattended. Sample preparation has long been the time-limiting step in x-ray spectrochemical analysis. Second, energy-dispersive spectrometry, in 1970 only beginning to assume its place among instrumental analytical methods, has undergone phenomenal development and application and, some believe, may supplant wavelength spectrometry for most applications in the foreseeable future.
Download or read book Neutron and X ray Spectroscopy written by Françoise Hippert and published by Springer Science & Business Media. This book was released on 2006-07-08 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: - Up-to-date account of the principles and practice of inelastic and spectroscopic methods available at neutron and synchrotron sources - Multi-technique approach set around a central theme, rather than a monograph on one technique - Emphasis on the complementarity of neutron spectroscopy and X-ray spectroscopy which are usually treated in separate books
Download or read book X Ray Spectroscopy written by Bipin K. Agarwal and published by Springer. This book was released on 2013-06-29 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray spectroscopy has emerged as a powerful tool in research and in industrial laboratories. It is used in the study of metals, semiconductors, amorphous solids, liquids and gases. This comprehensive presentation develops the subject from its basic principles and relates the theory to experimental observations. The new edition includes topics that have recently become important, for example, the X-ray laser, appearance potential spectroscopy, synchrotron radiation and EXAFS of high-Tc superconducting materials. A thorough introduction, up to research level, isprovided to EXAFS, which has seen rapid development in the past few years. This textbook conveniently presents the principles, applications and current techniques of X-ray spectroscopy, which makes it ideal for graduate students beginning research involving x-ray spectroscopy.
Download or read book Advances in X ray Spectroscopy written by Yvette Cauchois and published by Pergamon. This book was released on 1982 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in X-Ray Spectroscopy covers topics relevant to the advancement of X-ray spectroscopy technology. The book is a collection of papers written by specialists in X-ray spectroscopy and pays tribute to the scientific work of Prof. Yvette Cauchois. The text is organized into four parts. Part I covers the analysis of X-ray transitions between atomic levels and relativistic theories of X-ray emission satellites and electron BremsStrahlung. Part II reviews the means provided by X-ray spectroscopy for the determination of the electronic structure of solids, while Part III discusses methods of ...
Download or read book X ray Absorption Spectroscopy written by Graham N. George and published by Walter de Gruyter GmbH & Co KG. This book was released on 2024-12-02 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Targeted for chemists, the current textbook outlines the principles, experimental methods and data analysis in X-Ray Absorption Spectroscopy (XAS). The authors introduce EXAFS, Near-Edge XAS, X-Ray Imaging and many other advanced experimental techniques. A special section of the book is devoted to applications of XAS in chemistry, materials and environmental sciences.
Download or read book X Ray Fluorescence Spectrometry and Related Techniques written by Eva Margui and published by Momentum Press. This book was released on 2013-01-25 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray fluorescence spectrometry (XRF) is a well-established analytical technique for qualitative and quantitative elemental analysis of a wide variety of routine quality control and research samples. Among its many desirable features, it delivers true multi-element character analysis, acceptable speed and economy, easy of automation, and the capacity to analyze solid samples. This remarkable contribution to this field provides a comprehensive and up-to-date account of basic principles, recent developments, instrumentation, sample preparation procedures, and applications of XRF analysis. If you are a professional in materials science, analytic chemistry, or physics, you will benefit from not only the review of basics, but also the newly developed technologies with XRF. Those recent technological advances, including the design of low-power micro- focus tubes and novel X-ray optics and detectors, have made it possible to extend XRF to the analysis of low-Z elements and to obtain 2D or 3D information on a micrometer-scale. And, the recent development and commercialization of bench top and portable instrumentation, offering extreme simplicity of operation in a low-cost design, have extended the applications of XRF to many more analytical problems.
Download or read book X ray Absorption Spectroscopy for the Chemical and Materials Sciences written by John Evans and published by John Wiley & Sons. This book was released on 2017-11-23 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: A clear-cut introduction to the technique and applications of x-ray absorption spectroscopy X-ray Absorption Spectroscopy is being applied to a widening set of disciplines. Applications started with solid state physics and grew to materials science, chemistry, biochemistry and geology. Now, they cut across engineering materials, environmental science and national heritage — providing very detailed and useful information facilitating understanding and development of materials. This practical guide helps investigators choose the right experiment, carry it out properly and analyze the data to give the best reliable result. It gives readers insights to extract what they need from the world of large-scale experimental facilities like synchrotrons, which seem distant to many laboratory scientists. X-ray Absorption Spectroscopy for the Chemical and Materials Sciences seeks to educate readers about the strengths and limitations of the techniques, including their accessibility. Presented in six sections, it offers chapters that cover: an introduction to X-ray absorption fine structure XAFS; the basis of XAFS; X-ray sources; experimental methods; data analysis and simulation methods; and case studies. A no-nonsense introduction to the technique and applications of x-ray absorption spectroscopy Features Questions to support learning through the book Relevant to all working on synchrotron sources and applications in physics, materials, environment/geology and biomedical materials Four-color representation allows easy interpretation of images and data for the reader X-ray Absorption Spectroscopy for the Chemical and Materials Sciences is aimed at Masters-level and PhD students embarking on X-ray spectroscopy projects as well as scientists in areas of materials characterization.
Download or read book Plasma Physics written by and published by Academic Press. This book was released on 1971-02-27 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Physics
Download or read book Remote Compositional Analysis written by Janice L. Bishop and published by Cambridge University Press. This book was released on 2019-11-28 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive overview of the spectroscopic, mineralogical, and geochemical techniques used in planetary remote sensing.
Download or read book Chemical Bonding at Surfaces and Interfaces written by Anders Nilsson and published by Elsevier. This book was released on 2011-08-11 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular surface science has made enormous progress in the past 30 years. The development can be characterized by a revolution in fundamental knowledge obtained from simple model systems and by an explosion in the number of experimental techniques. The last 10 years has seen an equally rapid development of quantum mechanical modeling of surface processes using Density Functional Theory (DFT). Chemical Bonding at Surfaces and Interfaces focuses on phenomena and concepts rather than on experimental or theoretical techniques. The aim is to provide the common basis for describing the interaction of atoms and molecules with surfaces and this to be used very broadly in science and technology. The book begins with an overview of structural information on surface adsorbates and discusses the structure of a number of important chemisorption systems. Chapter 2 describes in detail the chemical bond between atoms or molecules and a metal surface in the observed surface structures. A detailed description of experimental information on the dynamics of bond-formation and bond-breaking at surfaces make up Chapter 3. Followed by an in-depth analysis of aspects of heterogeneous catalysis based on the d-band model. In Chapter 5 adsorption and chemistry on the enormously important Si and Ge semiconductor surfaces are covered. In the remaining two Chapters the book moves on from solid-gas interfaces and looks at solid-liquid interface processes. In the final chapter an overview is given of the environmentally important chemical processes occurring on mineral and oxide surfaces in contact with water and electrolytes. - Gives examples of how modern theoretical DFT techniques can be used to design heterogeneous catalysts - This book suits the rapid introduction of methods and concepts from surface science into a broad range of scientific disciplines where the interaction between a solid and the surrounding gas or liquid phase is an essential component - Shows how insight into chemical bonding at surfaces can be applied to a range of scientific problems in heterogeneous catalysis, electrochemistry, environmental science and semiconductor processing - Provides both the fundamental perspective and an overview of chemical bonding in terms of structure, electronic structure and dynamics of bond rearrangements at surfaces
Download or read book Basic 1H and 13C NMR Spectroscopy written by Metin Balci and published by Elsevier. This book was released on 2005-01-19 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Magnetic Resonance (NMR) spectroscopy is a powerful and theoretically complex analytical tool. Basic 1H- and 13C-NMR Spectroscopy provides an introduction to the principles and applications of NMR spectroscopy. Whilst looking at the problems students encounter when using NMR spectroscopy, the author avoids the complicated mathematics that are applied within the field. Providing a rational description of the NMR phenomenon, this book is easy to read and is suitable for the undergraduate and graduate student in chemistry. - Describes the fundamental principles of the pulse NMR experiment and 2D NMR spectra - Easy to read and written with the undergraduate and graduate chemistry student in mind - Provides a rational description of NMR spectroscopy without complicated mathematics
Download or read book Analytical Geomicrobiology written by Janice P. L. Kenney and published by Cambridge University Press. This book was released on 2019-07-18 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive handbook outlining state-of-the-art analytical techniques used in geomicrobiology, for advanced students, researchers and professional scientists.
Download or read book X Ray Fluorescence Spectroscopy for Laboratory Applications written by Michael Haschke and published by John Wiley & Sons. This book was released on 2021-04-05 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage on using X-ray fluorescence for laboratory applications This book focuses on the practical aspects of X-ray fluorescence (XRF) spectroscopy and discusses the requirements for a successful sample analysis, such as sample preparation, measurement techniques and calibration, as well as the quality of the analysis results. X-Ray Fluorescence Spectroscopy for Laboratory Applications begins with a short overview of the physical fundamentals of the generation of X-rays and their interaction with the sample material, followed by a presentation of the different methods of sample preparation in dependence on the quality of the source material and the objective of the measurement. After a short description of the different available equipment types and their respective performance, the book provides in-depth information on the choice of the optimal measurement conditions and the processing of the measurement results. It covers instrument types for XRF; acquisition and evaluation of X-Ray spectra; analytical errors; analysis of homogeneous materials, powders, and liquids; special applications of XRF; process control and automation. An important resource for the analytical chemist, providing concrete guidelines and support for everyday analyses Focuses on daily laboratory work with commercially available devices Offers a unique compilation of knowledge and best practices from equipment manufacturers and users Covers the entire work process: sample preparation, the actual measurement, data processing, assessment of uncertainty, and accuracy of the obtained results X-Ray Fluorescence Spectroscopy for Laboratory Applications appeals to analytical chemists, analytical laboratories, materials scientists, environmental chemists, chemical engineers, biotechnologists, and pharma engineers.
Download or read book X Ray Wavelengths written by Joyce Alvin Bearden and published by . This book was released on 1964 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Epoxy Composites written by Jyotishkumar Parameswaranpillai and published by John Wiley & Sons. This book was released on 2021-06-01 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover a one-stop resource for in-depth knowledge on epoxy composites from leading voices in the field Used in a wide variety of materials engineering applications, epoxy composites are highly relevant to the work of engineers and scientists in many fields. Recent developments have allowed for significant advancements in their preparation, processing and characterization that are highly relevant to the aerospace and automobile industry, among others. In Epoxy Composites: Fabrication, Characterization and Applications, a distinguished team of authors and editors deliver a comprehensive and straightforward summary of the most recent developments in the area of epoxy composites. The book emphasizes their preparation, characterization and applications, providing a complete understanding of the correlation of rheology, cure reaction, morphology, and thermo-mechanical properties with filler dispersion. Readers will learn about a variety of topics on the cutting-edge of epoxy composite fabrication and characterization, including smart epoxy composites, theoretical modeling, recycling and environmental issues, safety issues, and future prospects for these highly practical materials. Readers will also benefit from the inclusion of: A thorough introduction to epoxy composites, their synthesis and manufacturing, and micro- and nano-scale structure formation in epoxy and clay nanocomposites An exploration of long fiber reinforced epoxy composites and eco-friendly epoxy-based composites Practical discussions of the processing of epoxy composites based on carbon nanomaterials and the thermal stability and flame retardancy of epoxy composites An analysis of the spectroscopy and X-ray scattering studies of epoxy composites Perfect for materials scientists, polymer chemists, and mechanical engineers, Epoxy Composites: Fabrication, Characterization and Applications will also earn a place in the libraries of engineering scientists working in industry and process engineers seeking a comprehensive and exhaustive resource on epoxy composites.
