Download or read book Construction Materials written by Marios Soutsos and published by CRC Press. This book was released on 2017-10-10 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This established textbook provides an understanding of materials’ behaviour through knowledge of their chemical and physical structure. It covers the main classes of construction materials: metals, concrete, other ceramics (including bricks and masonry), polymers, fibre composites, bituminous materials, timber, and glass. It provides a clear and comprehensive perspective on the whole range of materials used in modern construction, to form a must-have for civil and structural engineering students, and those on courses such as architecture, surveying and construction. It begins with a Fundamentals section followed by a section on each of the major groups of materials. In this new edition: - The section on fibre composites FRP and FRC has been completely restructured and updated. - Typical questions with answers to any numerical examples are given at the end of each section, as well as an instructor’s manual with further questions and answers. - The links in all parts have also been updated and extended, including links to free reports from The Concrete Centre, as well as other online resources and material suppliers’ websites. - and now with solutions manual and resources for adopting instructors on https://www.crcpress.com/9781498741101

Download or read book Construction Materials written by Peter Domone and published by CRC Press. This book was released on 2018-10-03 with total page 1116 pages. Available in PDF, EPUB and Kindle. Book excerpt: So far in the twenty-first century, there have been many developments in our understanding of materials’ behaviour and in their technology and use. This new edition has been expanded to cover recent developments such as the use of glass as a structural material. It also now examines the contribution that material selection makes to sustainable construction practice, considering the availability of raw materials, production, recycling and reuse, which all contribute to the life cycle assessment of structures. As well as being brought up-to-date with current usage and performance standards, each section now also contains an extra chapter on recycling. Covers the following materials: metals concrete ceramics (including bricks and masonry) polymers fibre composites bituminous materials timber glass. This new edition maintains our familiar and accessible format, starting with fundamental principles and continuing with a section on each of the major groups of materials. It gives you a clear and comprehensive perspective on the whole range of materials used in modern construction. A must have for Civil and Structural engineering students, and for students of architecture, surveying or construction on courses which require an understanding of materials.

Download or read book Guide to ASTM Test Methods for the Analysis of Petroleum Products and Lubricants written by R. A. Nadkarni and published by Astm International. This book was released on 2000 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes the essential elements of all analytical tests used to characterize petroleum products. The 350 plus entries are alphabetically arranged by chemical and physical properties, such as apparent viscosity, density, metal analysis, sulfur determination, vapor pressure, and water. Each entry co

Download or read book Characterization and Properties of Petroleum Fractions written by M. R. Riazi and published by ASTM International. This book was released on 2005 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last three chapters of this book deal with application of methods presented in previous chapters to estimate various thermodynamic, physical, and transport properties of petroleum fractions. In this chapter, various methods for prediction of physical and thermodynamic properties of pure hydrocarbons and their mixtures, petroleum fractions, crude oils, natural gases, and reservoir fluids are presented. As it was discussed in Chapters 5 and 6, properties of gases may be estimated more accurately than properties of liquids. Theoretical methods of Chapters 5 and 6 for estimation of thermophysical properties generally can be applied to both liquids and gases; however, more accurate properties can be predicted through empirical correlations particularly developed for liquids. When these correlations are developed with some theoretical basis, they are more accurate and have wider range of applications. In this chapter some of these semitheoretical correlations are presented. Methods presented in Chapters 5 and 6 can be used to estimate properties such as density, enthalpy, heat capacity, heat of vaporization, and vapor pressure. Characterization methods of Chapters 2-4 are used to determine the input parameters needed for various predictive methods. One important part of this chapter is prediction of vapor pressure that is needed for vapor-liquid equilibrium calculations of Chapter 9.

Download or read book Health Effects of Occupational Exposure to Asphalt written by Mary Ann Stromberg Butler and published by . This book was released on 2001 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: An evaluation of the health effects and other relevant data since pub. of the 1977 NIOSH "Criteria for a Recommended Standard: Occupational Exposure to Asphalt Fumes." Includes an assessment of chemistry, health, and exposure data from studies in animals and humans exposed to raw asphalt, paving and roofing asphalt fume condensates, and asphalt-based paints. Will serve as to identify future research to reduce occupational exposures to asphalt. Chapters: no. of workers potentially exposed; physical and chemical properties; exposure; human health effects; experimental studies; research needs; uses and applications; summary of occupational exposure data; and respirators.

Download or read book Fundamentals of Petroleum Refining written by Mohamed A. Fahim and published by Elsevier. This book was released on 2009-11-19 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Petroleum Refining presents the fundamentals of thermodynamics and kinetics, and it explains the scientific background essential for understanding refinery operations. The text also provides a detailed introduction to refinery engineering topics, ranging from the basic principles and unit operations to overall refinery economics. The book covers important topics, such as clean fuels, gasification, biofuels, and environmental impact of refining, which are not commonly discussed in most refinery textbooks. Throughout the source, problem sets and examples are given to help the reader practice and apply the fundamental principles of refining. Chapters 1-10 can be used as core materials for teaching undergraduate courses. The first two chapters present an introduction to the petroleum refining industry and then focus on feedstocks and products. Thermophysical properties of crude oils and petroleum fractions, including processes of atmospheric and vacuum distillations, are discussed in Chapters 3 and 4. Conversion processes, product blending, and alkylation are covered in chapters 5-10. The remaining chapters discuss hydrogen production, clean fuel production, refining economics and safety, acid gas treatment and removal, and methods for environmental and effluent treatments. This source can serve both professionals and students (on undergraduate and graduate levels) of Chemical and Petroleum Engineering, Chemistry, and Chemical Technology. Beginners in the engineering field, specifically in the oil and gas industry, may also find this book invaluable. - Provides balanced coverage of fundamental and operational topics - Includes spreadsheets and process simulators for showing trends and simulation case studies - Relates processing to planning and management to give an integrated picture of refining

Download or read book Handbook of Petroleum Product Analysis written by James G. Speight and published by John Wiley & Sons. This book was released on 2015-02-02 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces the reader to the production of the products in a refinery • Introduces the reader to the types of test methods applied to petroleum products, including the need for specifications • Provides detailed explanations for accurately analyzing and characterizing modern petroleum products • Rewritten to include new and evolving test methods • Updates on the evolving test methods and new test methods as well as the various environmental regulations are presented

Download or read book The Shell Bitumen Industrial Handbook written by and published by Thomas Telford. This book was released on 1995 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Petroleum Processing written by Steven A. Treese and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Eco efficient Pavement Construction Materials written by F. Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2020-01-18 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Eco-efficient Pavement Construction Materials acquaints engineers with research findings on new eco-efficient pavement materials and how they can be incorporated into future pavements. Divided into three distinctive parts, the book emphasizes current research topics such as pavements with recycled waste, pavements for climate change mitigation, self-healing pavements, and pavements with energy harvesting potential. Part One considers techniques for recycling, Part Two reviews the contribution of pavements for climate change mitigation, including cool pavements, the development of new coatings for high albedo targets, and the design of pervious pavements. Finally, Part Three focuses on self-healing pavements, addressing novel materials and design and performance. Finally, the book discusses the case of pavements with energy harvesting potential, addressing different technologies on this field. - Offers a clear and concise lifecycle assessment of asphalt pavement recycling for greenhouse gas emission with temporal aspects - Applies key research trends to green the pavement industry - Includes techniques for recycling waste materials, the design of cool pavements, self-healing mechanisms, and key steps in energy harvesting

Download or read book Polymer Modified Bitumen written by Tony McNally and published by Elsevier. This book was released on 2011-09-15 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The addition of polymers to bitumen allows the modification of certain physical properties, such as softening point, brittleness and ductility, of the bitumen. Polymer modified bitumen: Properties and characterisation provides a valuable and in-depth coverage of the science and technology of polymer modified bitumen.After an initial introduction to bitumen and polymer modified bitumen, the book is divided into two parts. Chapters in part one focus on the preparation and properties of a range of polymer modified bitumen, including polymer bitumen emulsions, modification of bitumen with poly (urethanes), waste rubber and plastic and polypropylene fibres. Part two addresses the characterisation and properties of polymer modified bitumen. Chapter topics covered include rheology, simulated and actual long term ageing studies; the solubility of bituminous binders in fuels and the use of Fourier transform infrared spectroscopy to study ageing/oxidation of polymer modified bitumen.Polymer modified bitumen is an essential reference for scientists and engineers, from both academia and the civil engineering and transport industries, interested in the properties and characterisation of polymer modified bitumen. - Provides a comprehensive and in-depth coverage of the science and technology of polymer modified bitumen - Focuses on the preparation and properties of a range of polymer modified bitumen, including emulsions, modification of bitumen with poly(urethanes), waste rubber and plastic as well as polypropylene fibres - Addresses the characterization and properties of polymer modified bitumen, including rheology, simulated and actual long term ageing studies, and the solubility of bituminous binders in fuels

Download or read book Petroleum Science and Technology written by Chang Samuel Hsu and published by Springer. This book was released on 2019-07-02 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aimed at students and professionals, this book covers every major aspect of petroleum: the origin of fossil hydrocarbons and their chemical/physical properties; discovering hydrocarbon reserves; recovering oil, gas, and bitumen; purifying gas; the chemical and physical characterization of crude oil; refining crudes into fuels and lubricants; and converting simple chemicals into solvents, polymers, fibers, rubbers, coatings, and myriad other products, including pharmaceuticals. Readers will learn how the industry operates, from "upstream" exploration and production, "midstream" transportation to "downstream" refining, and manufacturing of finished products. The book also contains unique chapters on midstream operations, learnings from major accidents, and safety/environmental laws and regulations. It builds on the authors' previous books and teaching material from a highly rated course that is taught at the Florida A&M University/Florida State University (USA).

Download or read book Strategy and Methodology for Radioactive Waste Characterization written by International Atomic Energy Agency and published by IAEA. This book was released on 2007 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past decade significant progress has been achieved in the development of waste characterization and control procedures and equipment as a direct response to ever-increasing requirements for quality and reliability of information on waste characteristics. Failure in control procedures at any step can have important, adverse consequences and may result in producing waste packages which are not compliant with the waste acceptance criteria for disposal, thereby adversely impacting the repository. The information and guidance included in this publication corresponds to recent achievements and reflects the optimum approaches, thereby reducing the potential for error and enhancing the quality of the end product. -- Publisher's description.

Download or read book Corrosion in Systems for Storage and Transportation of Petroleum Products and Biofuels written by Alec Groysman and published by Springer Science & Business Media. This book was released on 2014-02-17 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book treats corrosion as it occurs and affects processes in real-world situations, and thus points the way to practical solutions. Topics described include the conditions in which petroleum products are corrosive to metals; corrosion mechanisms of petroleum products; which parts of storage tanks containing crude oils and petroleum products undergo corrosion; dependence of corrosion in tanks on type of petroleum products; aggressiveness of petroleum products to polymeric material; how microorganisms take part in corrosion of tanks and pipes containing petroleum products; which corrosion monitoring methods are used in systems for storage and transportation of petroleum products; what corrosion control measures should be chosen; how to choose coatings for inner and outer surfaces of tanks containing petroleum products; and how different additives (oxygenates, aromatic solvents) to petroleum products and biofuels influence metallic and polymeric materials. The book is of interest to corrosion engineers, materials engineers, oil and gas engineers, petroleum engineers, chemists, chemical engineers, mechanical engineers, failure analysts, scientists, and students, designers of tanks, pipelines and other systems for storage and transportation fuels, technicians. The book is of interest to corrosion engineers, materials engineers, oil and gas engineers, petroleum engineers, chemists, chemical engineers, mechanical engineers, failure analysts, scientists, and students, designers of tanks, pipelines and other systems for storage and transportation fuels, technicians. The book is of interest to corrosion engineers, materials engineers, oil and gas engineers, petroleum engineers, chemists, chemical engineers, mechanical engineers, failure analysts, scientists, and students, designers of tanks, pipelines and other systems for storage and transportation fuels, technicians.

Download or read book Copper and Bronze in Art written by David A. Scott and published by Getty Publications. This book was released on 2002 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a review of 190 years of literature on copper and its alloys. It integrates information on pigments, corrosion and minerals, and discusses environmental conditions, conservation methods, ancient and historical technologies.

Download or read book Asphalts in Road Construction written by Robert N Hunter and published by Thomas Telford. This book was released on 2000-09 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a useful guide to all facets of asphalt technology as applied to the construction and maintenance of highways and reflects the very best of UK asphalt and pavement technology. It covers all aspects of fully flexible road construction from foundation design through to surface treatment. The book also covers new materials.

Download or read book Twentieth Century Building Materials written by Thomas C. Jester and published by Getty Publications. This book was released on 2014-08-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the concluding decades of the twentieth century, the historic preservation community increasingly turned its attention to modern buildings, including bungalows from the 1930s, gas stations and diners from the 1940s, and office buildings and architectural homes from the 1950s. Conservation efforts, however, were often hampered by a lack of technical information about the products used in these structures, and to fill this gap Twentieth-Century Building Materials was developed by the U.S. Department of the Interior’s National Park Service and first published in 1995. Now, this invaluable guide is being reissued—with a new preface by the book’s original editor. With more than 250 illustrations, including a full-color photographic essay, the volume remains an indispensable reference on the history and conservation of modern building materials. Thirty-seven essays written by leading experts offer insights into the history, manufacturing processes, and uses of a wide range of materials, including glass block, aluminum, plywood, linoleum, and gypsum board. Readers will also learn about how these materials perform over time and discover valuable conservation and repair techniques. Bibliographies and sources for further research complete the volume. The book is intended for a wide range of conservation professionals including architects, engineers, conservators, and material scientists engaged in the conservation of modern buildings, as well as scholars in related disciplines.