Download or read book Methods for Wastewater Characterization in Activated Sludge Modelling written by Henryk Melcer and published by IWA Publishing. This book was released on 2004-11-01 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical modeling is a useful tool for the design, analysis and control of wastewater treatment systems. The activated sludge process is one of the most common processes used in wastewater treatment, and therefore is a particularly important candidate for the application of mathematical models. In the 1980s, a task group organized by the International Association on Water Quality (IAWQ) developed a conceptual model of the activated sludge process, which has become an industry-wide standard for the development of computer-based activated sludge models. A recent version of the IAWQ model incorporates 19 components, 17 processes, and numerous rate and stoichiometric coefficients. It is difficult and costly to quantify all of the necessary coefficients for any given application of the model; consequently, it is important to identify the most critical wastewater and biomass components and the relevant coefficients to be quantified for the most common uses of the model. It is also important to provide guidance to potential model users on the use of default and/or estimated values for the remaining parameters.
Download or read book Methods for Wastewater Characterization in Activated Sludge Modeling written by Henryk Melcer and published by Water Environment Federation. This book was released on 2003-01-01 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Activated Sludge Models written by The IWA Task Group on Mathematical Modelling for Design and Operation of Biological Wastewater Treatment and published by IWA Publishing. This book was released on 2000-05-31 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been produced to give a total overview of the Activated Sludge Model (ASM) family at the start of 2000 and to give the reader easy access to the different models in their original versions. It thus presents ASM1, ASM2, ASM2d and ASM3 together for the first time. Modelling of activated sludge processes has become a common part of the design and operation of wastewater treatment plants. Today models are being used in design, control, teaching and research. Contents ASM3: Introduction, Comparison of ASM1 and ASM3, ASM3: Definition of compounds in the model, ASM3: Definition of processes in the Model, ASM3: Stoichiometry, ASM3: Kinetics, Limitations of ASM3, Aspects of application of ASM3, ASM3C: A Carbon based model, Conclusion ASM 2d: Introduction, Conceptual Approach, ASM 2d, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Limitations, Conclusion ASM 2: Introduction, ASM 2, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Wastewater Characterization for Activated Sludge Processes, Calibration of the ASM 2, Model Limitations, Conclusion, Bibliography ASM 1: Introduction, Method of Model Presentation, Model Incorporating Carbon Oxidation Nitrification and Denitrification, Characterization of Wastewater and Estimation of Parameter Values, Typical Parameter Ranges, Default Values, and Effects of Environmental Factors, Assumptions, Restrictions and Constraints, Implementation of the Activated Sludge Model Scientific and Technical Report No.9
Download or read book Guidelines for Using Activated Sludge Models written by Leiv Rieger and published by IWA Publishing. This book was released on 2012-09-14 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical modelling of activated sludge systems is used widely for plant design, optimisation, training, controller design and research. The quality of simulation studies varies depending on the project objectives, finances and expertise available. Consideration has to be given to the model accuracy and the amount of time required carrying out a simulation study to produce the desired accuracy. Inconsistent approaches and insufficient documentation make quality assessment and comparison of simulation results difficult or almost impossible. A general framework for the application of activated sludge models is needed in order to overcome these obstacles. The genesis of the Good Modelling Practice (GMP) Task Group lies in a workshop held at the 4th IWA World Water Congress in Marrakech, Morocco where members of research groups active in wastewater treatment modelling came together to develop plans to synthesize the best practices of modellers from all over the world. The most cited protocols were included in the work, amongst others from: HSG (Hochschulgruppe), STOWA, BIOMATH and WERF. The goal of the group is to set up an internationally accepted framework to deal with the ASM type models in practice. This framework shall make modelling more straightforward and systematic to use especially for practitioners and consultants. Additionally, it shall help to define quality levels for simulation results, a procedure to assess this quality and to assist in the proper use of the models. The framework will describe a methodology for goal-oriented application of activated sludge models demonstrated by means of a concise guideline about the procedure of a simulation study and some illustrative case studies. The case studies shall give examples for the required data quality and quantity and the effort for calibration/validation with respect to a defined goal. The final report will include an extended appendix with additional information and details of methodologies. Additional features in Guidelines for Using Activated Sludge Models include a chapter on modelling industrial wastewater, an overview on the history, current practice and future of activated sludge modelling and several explanatory case studies. It can be used as an introductory book to learn about Good Modelling Practice (GMP) in activated sludge modelling and will be of special interest for process engineers who have no prior knowledge of modelling or for lecturers who need a textbook for their students. The STR can also be used as a modelling reference book and includes an extended appendix with additional information and details of methodologies. Scientific and Technical Report No. 22
Download or read book Activated Sludge Modelling Processes in Theory and Practice written by M. Henze and published by IWA Publishing (International Water Assoc). This book was released on 2002-05-31 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of models in activated sludge design and operation is increasing, with a similar trend seen in education. Starting with the original IAWPRC Activated Sludge Model no 1 (ASM1) and the subsequent ASM2 and ASM2D, the first generation of activated sludge models have played an important role in practice. With the development of the latest IWA Activated Sludge Model no 3 further progress has been made, and given the concurrent development of new methods for characterization of biomass and wastewater, this is a field of vigorous activity at present. The fifth Kollekolle Seminar brought together many of the world's leading experts on the activated sludge process, who have been working with activated sludge models in practice and research. The aim, as with previous seminars was to present the latest research findings, putting them into the proper perspective. From this high-quality programme 22 papers have been selected and revised to provide the best collection of papers on the state of the art of activated sludge modeling. Papers cover the following topics: modeling developments; wastewater and biomass characterization and parameter identification; modeling in practices.
Download or read book Wastewater Characterization for Activated Sludge Process Modelling written by Hicham El-Halaby and published by . This book was released on 1993 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wastewater Characterization for Activated Sludge Process Modelling written by and published by . This book was released on 1996 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mathematical Modelling and Computer Simulation of Activated Sludge Systems written by Jacek Makinia and published by IWA Publishing. This book was released on 2020-03-02 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Modelling and Computer Simulation of Activated Sludge Systems – Second Edition provides, from the process engineering perspective, a comprehensive and up-to-date overview regarding various aspects of the mechanistic (“white box”) modelling and simulation of advanced activated sludge systems performing biological nutrient removal. In the new edition of the book, a special focus is given to nitrogen removal and the latest developments in modelling the innovative nitrogen removal processes. Furthermore, a new section on micropollutant removal has been added. The focus of modelling has been shifting in the last years to models that can describe the performance of a whole plant (plant-wide modelling). The expanded part of this new edition introduces models describing the most important processes interrelated with the mainstream activated sludge systems as well as models describing the energy balance, operating costs and environmental impact. The complex process evaluation, including minimization of energy consumption and carbon footprint, is in line with the present and future wastewater treatment goals. By combining a general introduction and a textbook, this book serves both intermediate and more experienced model users, both researchers and practitioners, as a comprehensive guide to modelling and simulation studies. The book can be used as a supplemental material at graduate and post-graduate levels of wastewater engineering/modelling courses.
Download or read book Formation characterization and mathematical modeling of the aerobic granular sludge written by Bing-Jie Ni and published by Springer Science & Business Media. This book was released on 2012-07-25 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerobic granular sludge technology will play an important role as an innovative technology alternative to the present activated sludge process in industrial and municipal wastewater treatment in the near future. Intended to fill the gaps in the studies of aerobic granular sludge, this thesis comprehensively investigates the formation, characterization and mathematical modeling of aerobic granular sludge, through integrating the process engineering tools and advanced molecular microbiology. The research results of this thesis contributed significantly to the advance of understanding and optimization of the bacterial granulation processes, the next generation of technology for cost-effective biological wastewater treatment. Dr. Bing-Jie Ni works at Advanced Water Management Centre (AWMC) of The University of Queensland, Australia.
Download or read book Modeling of Activated Sludge Systems written by Derin Orhon and published by CRC Press. This book was released on 1997-07-15 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated sludge is the most vital wastewater process today. Now, this recent book provides a comprehensive guide to the modelling and design of activated sludge systems. Written by two leaders in the wastewater field, the book presents extensive and up-to-date coverage of all areas in the activated sludge process microbiological basis, reactor kinetics, and design methodologies. The book is organized for easy reference and is ideal as a text or desktop guide.
Download or read book Biological Wastewater Treatment written by Mogens Henze and published by IWA Publishing. This book was released on 2008-09-01 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: For information on the online course in Biological Wastewater Treatment from UNESCO-IHE, visit: http://www.iwapublishing.co.uk/books/biological-wastewater-treatment-online-course-principles-modeling-and-design Over the past twenty years, the knowledge and understanding of wastewater treatment have advanced extensively and moved away from empirically-based approaches to a first principles approach embracing chemistry, microbiology, physical and bioprocess engineering, and mathematics. Many of these advances have matured to the degree that they have been codified into mathematical models for simulation with computers. For a new generation of young scientists and engineers entering the wastewater treatment profession, the quantity, complexity and diversity of these new developments can be overwhelming, particularly in developing countries where access is not readily available to advanced level tertiary education courses in wastewater treatment. Biological Wastewater Treatment addresses this deficiency. It assembles and integrates the postgraduate course material of a dozen or so professors from research groups around the world that have made significant contributions to the advances in wastewater treatment. The book forms part of an internet-based curriculum in biological wastewater treatment which also includes: Summarized lecture handouts of the topics covered in book Filmed lectures by the author professors Tutorial exercises for students self-learning Upon completion of this curriculum the modern approach of modelling and simulation to wastewater treatment plant design and operation, be it activated sludge, biological nitrogen and phosphorus removal, secondary settling tanks or biofilm systems, can be embraced with deeper insight, advanced knowledge and greater confidence.
Download or read book Wastewater Treatment Process Modeling Second Edition MOP31 written by Water Environment Federation. Wastewater Treatment Process Modeling Task Force and published by McGraw Hill Professional. This book was released on 2013-08-30 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised edition of: An Introduction to process modeling for designers / prepared by the Design of Municipal Wastewater Treatment Plants (MOP 8) Task Force of the Water Environment Federation. 2009.
Download or read book Applications of Activated Sludge Models written by Damir Brdjanovic and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1982 the International Association on Water Pollution Research and Control (IAWPRC), as it was then called, established a Task Group on Mathematical Modelling for Design and Operation of Activated Sludge Processes. The aim of the Task Group was to create a common platform that could be used for the future development of models for COD and N removal with a minimum of complexity. As the collaborative result of the work of several modelling groups, the Activated Sludge Model No. 1 (ASM1) was published in 1987, exactly 25 years ago. The ASM1 can be considered as the reference model, since this model triggered the general acceptance of wastewater treatment modelling, first in the research community and later on also in practice. ASM1 has become a reference for many scientific and practical projects, and has been implemented (in some cases with modifications) in most of the commercial software available for modelling and simulation of plants for N removal. The models have grown more complex over the years, from ASM1, including N removal processes, to ASM2 (and its variations) including P removal processes, and ASM3 that corrects the deficiencies of ASM1 and is based on a metabolic approach to modelling. So far, ASM1 is the most widely applied. Applications of Activated Sludge Models has been prepared in celebration of 25 years of ASM1 and in tribute to the activated sludge modelling pioneer, the late Professor G.v.R. Marrais. It consists of a dozen of practical applications for ASM models to model development, plant optimization, extension, upgrade, retrofit and troubleshooting, carried out by the members of the Delft modelling group over the last two decades.
Download or read book Advanced Technologies Systems and Applications VII written by Naida Ademović and published by Springer Nature. This book was released on 2022-10-15 with total page 789 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of articles on the advanced and interdisciplinary application of innovative technologies. Scientific investigations and results of the conference 13th Days of Bosnian-Herzegovinian American Academy of Art and Sciences held in Sarajevo, Bosnia and Herzegovina, June 23-26, 2022, are presented in this book. The up-to-date advances in various fields of engineering have been presented through numerous papers spanning the disciplines of civil engineering, mechanical engineering, advanced electrical power systems, computer modeling and simulations for engineering applications, computer science and artificial intelligence, geodesy and geoinformation, data science and geographic information systems and information and communication technologies. The editors would like to extend special gratitude to all the chairs of the planned symposia of the 13th Days of BHAAAS for their dedicated work in the production of this book.
Download or read book Biological Wastewater Treatment written by C. P. Leslie Grady Jr. and published by CRC Press. This book was released on 2011-05-09 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following in the footsteps of previous highly successful and useful editions, Biological Wastewater Treatment, Third Edition presents the theoretical principles and design procedures for biochemical operations used in wastewater treatment processes. It reflects important changes and advancements in the field, such as a revised treatment of the micr
Download or read book Activated Sludge 100 Years and Counting written by David Jenkins and published by IWA Publishing. This book was released on 2014-05-31 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated Sludge - 100 Years and Counting covers the current status of all aspects of the activated sludge process and looks forward to its further development in the future. It celebrates 100 years of the Activated Sludge process, from the time that the early developers presented the seminal works that led to its eventual worldwide adoption. The book assembles contributions from renowned world leaders in activated sludge research, development, technology and application. The objective of the book is to summarise the knowledge of all aspects of the activated sludge process and to present and discuss anticipated future developments. The book comprises invited papers that were delivered at the conference "Activated Sludge...100 Years and Counting!", held in Essen, Germany, June 12th to 14th, 2014. Activated Sludge - 100 Years and Counting is of interest to researchers, engineers, designers, operations specialists, and governmental agencies from a wide range of disciplines associated with all aspects of the activated sludge process. Authors: David Jenkins, University of California at Berkeley, USA, Jiri Wanner, Institute of Chemical Technology, Prague, Czech Republic.
Download or read book Biological Sludge Minimization and Biomaterials Bioenergy Recovery Technologies written by Etienne Paul and published by John Wiley & Sons. This book was released on 2012-07-30 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to sludge management, reuse, and disposal When wastewater is treated, reducing organic material to carbon dioxide, water, and bacterial cells the cells are disposed of, producing a semisolid and nutrient-rich byproduct called sludge. The expansion in global population and industrial activity has turned the production of excess sludge into an international environmental challenge, with the ultimate disposal of excess sludge now one of the most expensive problems faced by wastewater facilities. Written by two leading environmental engineers, Biological Sludge Minimization and Biomaterials/Bioenergy Recovery Technologies offers a comprehensive look at cutting-edge techniques for reducing sludge production, converting sludge into a value-added material, recovering useful resources from sludge, and sludge incineration. Reflecting the impact of new stringent environmental legislation, this book offers a frank appraisal of how sludge can be realistically managed, covering key concerns and the latest tools: Fundamentals of biological processes for wastewater treatment, wastewater microbiology, and microbial metabolism, essential to understanding how sludge is produced Prediction of primary sludge and waste-activated sludge production, among the chief design and operational challenges of a wastewater treatment plant Technologies for sludge reduction, with a focus on reducing microbial growth yield as well as enhancing sludge disintegration The use of anerobic digestion of sewage sludge for biogas recovery, in terms of process fundamentals, design, and operation The use of the microbial fuel cell (MFC) system for the sustainable treatment of organic wastes and electrical energy recovery
