Download or read book Basic Method Validation written by James O. Westgard and published by AACC Press. This book was released on 2003-01-01 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the publication of the Final CLIA Rule, new method validation responsibilities came to the laboratory. Previously, moderately complex methods did not need to be validated. But the Final Rule combined moderately and highly complex methods into a category of non-waived methods. Now Laboratories must validate all non-waived methods introduced after April 24, 2003. To help laboratory professionals comply with these new regulatory changes, a second edition of this manual was prepared. Book jacket.

Download or read book Method Validation in Pharmaceutical Analysis written by Joachim Ermer and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adopting a practical approach, the authors provide a detailed interpretation of the existing regulations (GMP, ICH), while also discussing the appropriate calculations, parameters and tests. The book thus allows readers to validate the analysis of pharmaceutical compounds while complying with both the regulations as well as the industry demands for robustness and cost effectiveness. Following an introduction to the basic parameters and tests in pharmaceutical validation, including specificity, linearity, range, precision, accuracy, detection and quantitation limits, the text focuses on a life-cycle approach to validation and the integration of validation into the whole analytical quality assurance system. The whole is rounded off with a look at future trends. With its first-hand knowledge of the industry as well as regulating bodies, this is an invaluable reference for analytical chemists, the pharmaceutical industry, pharmaceutists, QA officers, and public authorities.

Download or read book Calibration and Validation of Analytical Methods written by Mark Stauffer and published by BoD – Books on Demand. This book was released on 2018-04-25 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book seeks to introduce the reader to current methodologies in analytical calibration and validation. This collection of contributed research articles and reviews addresses current developments in the calibration of analytical methods and techniques and their subsequent validation. Section 1, "Introduction," contains the Introductory Chapter, a broad overview of analytical calibration and validation, and a brief synopsis of the following chapters. Section 2 "Calibration Approaches" presents five chapters covering calibration schemes for some modern analytical methods and techniques. The last chapter in this section provides a segue into Section 3, "Validation Approaches," which contains two chapters on validation procedures and parameters. This book is a valuable source of scientific information for anyone interested in analytical calibration and validation.

Download or read book Development and Validation of Analytical Methods written by Christopher M. Riley and published by Elsevier. This book was released on 1996-05-29 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need to validate an analytical or bioanalytical method is encountered by analysts in the pharmaceutical industry on an almost daily basis, because adequately validated methods are a necessity for approvable regulatory filings. What constitutes a validated method, however, is subject to analyst interpretation because there is no universally accepted industry practice for assay validation. This book is intended to serve as a guide to the analyst in terms of the issues and parameters that must be considered in the development and validation of analytical methods. In addition to the critical issues surrounding method validation, this book also deals with other related factors such as method development, data acquisition, automation, cleaning validation and regulatory considerations. The book is divided into three parts. Part One, comprising two chapters, looks at some of the basic concepts of method validation. Chapter 1 discusses the general concept of validation and its role in the process of transferring methods from laboratory to laboratory. Chapter 2 looks at some of the critical parameters included in a validation program and the various statistical treatments given to these parameters. Part Two (Chapters 3, 4 and 5) of the book focuses on the regulatory perspective of analytical validation. Chapter 3 discusses in some detail how validation is treated by various regulatory agencies around the world, including the United States, Canada, the European Community, Australia and Japan. This chapter also discusses the International Conference on Harmonization (ICH) treatment of assay validation. Chapters 4 and 5 cover the issues and various perspectives of the recent United States vs. Barr Laboratories Inc. case involving the retesting of samples. Part Three (Chapters 6 - 12) covers the development and validation of various analytical components of the pharmaceutical product development process. This part of the book contains specific chapters dedicated to bulk drug substances and finished products, dissolution studies, robotics and automated workstations, biotechnology products, biological samples, analytical methods for cleaning procedures and computer systems and computer-aided validation. Each chapter goes into some detail describing the critical development and related validation considerations for each topic. This book is not intended to be a practical description of the analytical validation process, but more of a guide to the critical parameters and considerations that must be attended to in a pharmaceutical development program. Despite the existence of numerous guidelines including the recent attempts by the ICH to be implemented in 1998, the practical part of assay validation will always remain, to a certain extent, a matter of the personal preference of the analyst or company. Nevertheless, this book brings together the perspectives of several experts having extensive experience in different capacities in the pharmaceutical industry in an attempt to bring some consistency to analytical method development and validation.

Download or read book Analytical Method Validation and Instrument Performance Verification written by Chung Chow Chan and published by John Wiley & Sons. This book was released on 2004-04-23 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Validation describes the procedures used to analyze pharmaceutical products so that the data generated will comply with the requirements of regulatory bodies of the US, Canada, Europe and Japan. Calibration of Instruments describes the process of fixing, checking or correcting the graduations of instruments so that they comply with those regulatory bodies. This book provides a thorough explanation of both the fundamental and practical aspects of biopharmaceutical and bioanalytical methods validation. It teaches the proper procedures for using the tools and analysis methods in a regulated lab setting. Readers will learn the appropriate procedures for calibration of laboratory instrumentation and validation of analytical methods of analysis. These procedures must be executed properly in all regulated laboratories, including pharmaceutical and biopharmaceutical laboratories, clinical testing laboratories (hospitals, medical offices) and in food and cosmetic testing laboratories.

Download or read book Practical Approaches to Method Validation and Essential Instrument Qualification written by Chung Chow Chan and published by John Wiley & Sons. This book was released on 2011-03-01 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical approaches to ensure that analytical methods and instruments meet GMP standards and requirements Complementing the authors' first book, Analytical Method Validation and Instrument Performance Verification, this new volume provides coverage of more advanced topics, focusing on additional and supplemental methods, instruments, and electronic systems that are used in pharmaceutical, biopharmaceutical, and clinical testing. Readers will gain new and valuable insights that enable them to avoid common pitfalls in order to seamlessly conduct analytical method validation as well as instrument operation qualification and performance verification. Part 1, Method Validation, begins with an overview of the book's risk-based approach to phase appropriate validation and instrument qualification; it then focuses on the strategies and requirements for early phase drug development, including validation of specific techniques and functions such as process analytical technology, cleaning validation, and validation of laboratory information management systems Part 2, Instrument Performance Verification, explores the underlying principles and techniques for verifying instrument performance—coverage includes analytical instruments that are increasingly important to the pharmaceutical industry, such as NIR spectrometers and particle size analyzers—and offers readers a variety of alternative approaches for the successful verification of instrument performance based on the needs of their labs At the end of each chapter, the authors examine important practical problems and share their solutions. All the methods covered in this book follow Good Analytical Practices (GAP) to ensure that reliable data are generated in compliance with current Good Manufacturing Practices (cGMP). Analysts, scientists, engineers, technologists, and technical managers should turn to this book to ensure that analytical methods and instruments are accurate and meet GMP standards and requirements.

Download or read book Principles and Practices of Method Validation written by A Fajgelj and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles and Practices of Method Validation is an overview of the most recent approaches used for method validation in cases when a large number of analytes are determined from a single aliquot and where a large number of samples are to be analysed. Much of the content relates to the validation of new methods for pesticide residue analysis in foodstuffs and water but the principles can be applied to other similar fields of analysis. Different chromatographic methods are discussed, including estimation of various effects, eg. matrix-induced effects and the influence of the equipment set-up. The methods used for routine purposes and the validation of analytical data in the research and development environment are documented. The legislation covering the EU-Guidance on residue analytical methods, an extensive review of the existing in-house method validation documentation and guidelines for single-laboratory validation of analytical methods for trace-level concentrations of organic chemicals are also included. With contributions from experts in the field, any practising analyst dealing with method validation will find the examples presented in this book a useful source of technical information.

Download or read book Analytical Method Development and Validation written by Michael E. Swartz and published by CRC Press. This book was released on 2018-10-03 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes analytical methods development, optimization and validation, and provides examples of successful methods development and validation in high-performance liquid chromatography (HPLC) areas. The text presents an overview of Food and Drug Administration (FDA)/International Conference on Harmonization (ICH) regulatory guidelines, compliance with validation requirements for regulatory agencies, and methods validation criteria stipulated by the US Pharmacopia, FDA and ICH.

Download or read book Basic Method Validation and Verification 4th Edition written by James O. Westgard and published by . This book was released on 2020-08 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Validation of Analytical Methods for Pharmaceutical Analysis written by Oona McPolin and published by Lulu.com. This book was released on 2009-05-01 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive guide on validating analytical methods. Key features: Full review of the available regulatory guidelines on validation and in particular, ICH. Sections of the guideline, Q2(R1), have been reproduced in this book with the kind permission of the ICH Secretariat; Thorough discussion of each of the validation characteristics (Specificity; Linearity; Range; Accuracy; Precision; Detection Limit; Quantitation Limit; Robustness; System Suitability) plus practical tips on how they may be studied; What to include in a validation protocol with advice on the experimental procedure to follow and selection of appropriate acceptance criteria; How to interpret and calculate the results of a validation study including the use of suitable statistical calculations; A fully explained case study demonstrating how to plan a validation study, what to include in the protocol, experiments to perform, setting acceptance criteria, interpretation of the results and reporting the study.

Download or read book Systemic Management for Intelligent Organizations written by Stefan N. Grösser and published by Springer Science & Business Media. This book was released on 2012-10-17 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: ​The last two decades increasingly have challenged the field of management by confronting it with rapidly growing levels of dynamism, inter-connectedness, and complexity. Systems-based management approaches, their promise already proven, offer great potentials for influencing and coping with this development. This collection of essays offers ideas and exemplary case studies from experts in systemic management, organiza-tional cybernetics, and system dynamics for meeting the challenges in so-cio-economic systems. This book was compiled to honor the academic achievement of Markus Schwaninger, a leading protagonist in developing the field of systemic management and organizational cybernetics. His stature in the field is demonstrated in the forewords by Raul Espejo and John Sterman. The efforts of 18 researchers and practitioners, all closely related to Markus Schwaninger, offer conceptual and empirical approaches that will allow managers and advanced students of the management profession to analyze, understand, and design intelligent organizations. The book weaves its content from both theory and practice and offers hints for improving a variety of organizations, both private and public, profit and non-profit, and large and small.​

Download or read book Decision Making in Engineering Design written by Kemper E. Lewis and published by American Society of Mechanical Engineers. This book was released on 2006 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whether you are an engineer facing decisions in product design, an instructor or student engaged in course work, or a researcher exploring new options and opportunities, you can turn to Decision Making in Engineering Design for: Foundations and fundamentals of making decisions in product design; Clear examples of effective application of Decision-Based Design; State-of-the-art theory and practice in Decision-Based Design; Thoughtful insights on validation, uncertainty, preferences, distributed design, demand modeling, and other issues; End-of-chapter exercise problems to facilitate learning. With this advanced text, you become current with research results on DBD developed since the inception of The Open Workshop on Decision-Based Design, a project funded by the National Science Foundation.

Download or read book Handbook of Analytical Validation written by Michael E. Swartz and published by CRC Press. This book was released on 2012-04-24 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for practitioners in both the drug and biotechnology industries, this handbook carefully compiles the current regulatory requirements to correctly and properly validate a new or modified analytical method. The Handbook of Analytical Validation is designed to teach readers how to fully and correctly adapt new or modified analytical methods to meet regulatory requirements. The contents offer the latest regulatory requirements for submitting applications for new drugs or other applications, as regards analytical method validation. The chapters apply to both small molecules in the conventional pharmaceutical industry, as well the biotech industry.

Download or read book Validating Chromatographic Methods written by David M. Bliesner and published by John Wiley & Sons. This book was released on 2006-09-11 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: All the information and tools needed to set up a successful method validation system Validating Chromatographic Methods brings order and Current Good Manufacturing Practices to the often chaotic process of chromatographic method validation. It provides readers with both the practical information and the tools necessary to successfully set up a new validation system or upgrade a current system to fully comply with government safety and quality regulations. The net results are validated and transferable analytical methods that will serve for extended periods of time with minimal or no complications. This guide focuses on high-performance liquid chromatographic methods validation; however, the concepts are generally applicable to the validation of other analytical techniques as well. Following an overview of analytical method validation and a discussion of its various components, the author dedicates a complete chapter to each step of validation: Method evaluation and further method development Final method development and trial method validation Formal method validation and report generation Formal data review and report issuance Templates and examples for Methods Validation Standard Operating Procedures, Standard Test Methods, Methods Validation Protocols, and Methods Validation Reports are all provided. Moreover, the guide features detailed flowcharts and checklists that lead readers through every stage of method validation to ensure success. All of the templates are also included on a supplementary support site, enabling readers to easily work with and customize them. For scientists and technicians new to method validation, this guide provides all the information and tools needed to develop a top-quality system. For those experienced with method validation, the guide helps to upgrade and improve existing systems.

Download or read book ICH Quality Guidelines written by Andrew Teasdale and published by John Wiley & Sons. This book was released on 2017-10-09 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examining the implications and practical implementation of multi-disciplinary International Conference on Harmonization (ICH) topics, this book gives an integrated view of how the guidelines inform drug development strategic planning and decision-making. • Addresses a consistent need for interpretation, training, and implementation examples of ICH guidelines via case studies • Offers a primary reference point for practitioners addressing the dual challenge of interpretation and practical implementation of ICH guidelines • Uses case studies to help readers understand and apply ICH guidelines • Provides valuable insights into guidelines development, with chapters by authors involved in generating or with experience implementing the guidelines • Includes coverage of stability testing, analytical method validation, impurities, biotechnology drugs and products, and good manufacturing practice (GMP)

Download or read book Guidance for the Validation of Analytical Methodology and Calibration of Equipment Used for Testing of Illicit Drugs in Seized Materials and Biological Specimens written by United Nations and published by United Nations Publications. This book was released on 2009 with total page 67 pages. Available in PDF, EPUB and Kindle. Book excerpt: The validation of analytical methods and the calibration of equipment are important aspects of quality assurance in the laboratory. This manual deals with both of these within the context of testing of illicit drugs in seized materials and biological specimens. It provides an introduction and practical guidance to national authorities and analysts in the implementation of method validation and verification, and also in the calibration/performance verification of laboratory instrumentation and equipment within their existing internal quality assurance programmes. The procedures described represent a synthesis of the experience of scientists from several reputable laboratories around the world.

Download or read book Validity and Validation written by Catherine S. Taylor and published by Oxford University Press. This book was released on 2013-09-03 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Understanding Research series focuses on the process of writing up social research. The series is broken down into three categories: Understanding Statistics, Understanding Measurement, and Understanding Qualitative Research. The books provide researchers with guides to understanding, writing, and evaluating social research. Each volume demonstrates how research should be represented, including how to write up the methodology as well as the research findings. Each volume also reviews how to appropriately evaluate published research. Validity and Validation is an introduction to validity theory and to the methods used to obtain evidence for the validity of research and assessment results. The book pulls together the best thinking from educational and psychological research and assessment over the past 50 years. It briefly describes validity theory's roots in the philosophy of science. It highlights the ways these philosophical perspectives influence concepts of internal and external validity in research methodology, as well as concepts of validity and reliability in educational and psychological tests and measurements. Each chapter provides multiple examples (e.g., research designs and examples of output) to help the readers see how validation work is done in practice, from the ways we design research studies to the ways we interpret research results. Of particular importance is the practical focus on validation of scores from tests and other measures. The book also addresses strategies for investigating the validity of inferences we make about examinees using scores from assessments, as well as how to investigate score uses, the value implications of score interpretations, and the social consequences of score use. With this foundation, the book presents strategies for minimizing threats for validity as well as quantitative and qualitative methods for gathering evidence for the validity of scores.