Download or read book Metallized Plastics 5 6 Fundamental and Applied Aspects written by Kash L. Mittal and published by CRC Press. This book was released on 1998-10-22 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book chronicles the proceedings of the 5th and 6th symposia on Metallized Plastics: Fundamental and Applied Aspects, held in May 1996 and September 1997 respectively. This volume contains 29, carefully reviewed, revised and up-dated papers which were presented at both symposia. The book is divided in the following three parts: Metallization Te
Download or read book Metallized Plastics 5 6 written by K. L. Mittal and published by VSP. This book was released on 1998-10 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book chronicles the proceedings of the 5th and 6th symposia on Metallized Plastics: Fundamental and Applied Aspects, held in May 1996 and September 1997 respectively. This volume contains 29, carefully reviewed, revised and up-dated papers which were presented at both symposia. The book is divided in the following three parts: Metallization Techniques and Properties of Metal Deposits; Spectroscopic Investigation of Interfacial Interactions; Surface Modification and Adhesion Aspects. Topics covered include: various metallization techniques for a variety of plastic substrates and simplification of electroless method by using plasma or UV laser pretreatment; various properties of metal deposits; investigation of metal-polymer interfaces using a variety of spectroscopic techniques; interaction of metals with self-assembled monolayers; study of early stages of metal-polymer interface formation; surface modification of plastics by a host of techniques including plasma, excimer laser, ion beams and characterization of modified plastics surfaces; surface modification of polymers used in the low Earth Orbit space environment; adhesion aspects of metallized plastics including a quantitative adhesion test for metal coated polymer fibers and nondestructive techniques for monitoring metallized plastics adhesion.
Download or read book Metallized Plastics 7 Fundamental and Applied Aspects written by Kash L. Mittal and published by CRC Press. This book was released on 2020-04-12 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the 7th Symposium on Metallized Plastics: Fundamental and Applied Aspects, held in Newark, New Jersey, December 2-3, 1999. This volume contains a total of 16 papers, which were all rigorously peer reviewed and suitably revised before inclusion. The book is divided into two parts: Metallization Techniques and Properties of Metal Deposits, and Interfacial and Adhesion Aspects. The topics covered include: various metallization techniques for a variety of plastics including some novel developments involving suitable plastic pretreatments; modification of polymers by plasma and ion-assisted reactions; metal doped plasma polymer films; metal-polyimide nanocomposite films; investigation of metal/polymer interactions by a variety of techniques; ways to improve adhesion of metal/polymer systems; modeling of metal/polymer interfaces; application of surface analytical techniques in the arena of metallized plastics; and ultrathin films on metal surfaces. This volume offers a wealth of information and represents current commentary on the R&D activity taking place in the technologically highly important field of metallized plastics and is of value and interest to anyone interested in the fundamental or applied aspects of metallized plastics.
Download or read book Metallized Plastics 1 written by K.L. Mittal and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume chronicles the proceedings of the Symposium on Metallized Plastics: Fundamental and Applied Aspects held under the auspices of the Dielectrics and Insulation Division of the Electrochemical Society in Chicago, October 10-12, 1988. This was the premier symposium on this topic and if the comments from the attendees are any barometer of the success of a symposium then it was a grand success. Concomitantly, it has been decided to hold it on a regular basis (at intervals of 18 months) and the second event in this series is planned as a part of the Electrochemical Society meeting in Montreal, Canada, May 6-10, 1990. Metallized plastics find a legion of applications ranging from mundane to very sophisticated. A complete catalog of the various technological applications of metallized plastics will be prohibitively long, so here some eclectic examples should suffice to show why there is such high tempo of R&D activity in the arena of metallized plastics, and all signals indicate that this high tempo will continue unabated. For example, polymeric films are metallized for packaging (food and other products) purposes, and the applications of metallized plastics in the automotive industry are quite obvious. In the field of microelectronics and computer technology, insulators are metallized for interconnection and other functional purposes. Also plastics are metallized to provide electromagnetic shielding.
Download or read book Metallized Plastics written by K. L. Mittal and published by . This book was released on 1989 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallized Plastics 2 written by K.L. Mittal and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the Second Symposium on Metallized Plastics: Fundamental and Applied Aspects held under the aegis of the Dielectric Science and Technology Division of the Electrochemical Society in Montreal, Canada, May 7-10, 1990. The first symposium on this topic was held in Chicago, October 10-12, 1988 and the proceedings of l which have been chronicled in a hard-bound volume l As pointed out in the Preface to the proceedings of the first symposium the metallized plastics find scores of applications ranging from very mundane to very sophisticated. Even a cursory look at the literature will convince that this field has sprouted; and there is every reason to believe that with all the research and development activities taking place, new and exciting applications of metallized plastics will emerge. The program for the second symposium was very comprehensive as it included 46 papers covering many aspects of metallized plastics. This symposium was a testimonial to the brisk research activity and keen interest in the topic of metallized plastics. The success of this symposium reinforced our earlier belief that there was a definite need to hold symposia on this topic on a regular basis. Concomitantly, the third symposium in this vein was held in Phoenix, Arizona, October 13-18, 1991 and the fourth is planned for May 16-21, 1993 in Honolulu, Hawaii. As regards the present volume, it contains a total of 35 papers covering a variety of topics ranging from very fundamental to very applied.
Download or read book Metallized Plastics 3 written by K.L. Mittal and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume chronicles the proceedings of the Third Symposium on Metallized Plastics: Fundamental and Applied Aspects held under the auspices of the Dielectric Science and Technology Division of the Electrochemical Society in Phoenix, Arizona, October 13-18, 1991. This series of symposia to address the subject of metallized plastics was initiated in 1988 and the premier symposium was held in Chicago, October 10-12, 1988, followed by the second event in Montreal, Canada, May 7-10, 1990. The rroceedings of these two symposia have been properly documented ,2. The third symposium was a huge success like the previous two events, and all this is testimonial to the brisk interest and high tempo of R&D activity in the fie14 of metallized plastics. This further bolsters our earlier thinking that there was a conspicuous need to hold symposia on this topic on a regular basis and the fourth is planned for May 16-21, 1993 in Honolulu, Hawaii. The study of metallized plastics constitutes an important human endeavor l and as pointed out earlier there are myriad applications of metallized plastics ranging from very commonplace to exotic. Also a survey of the recent literature will reveal that both the fundamental and applied aspects of metallized plastics are being pursued with great vigor.
Download or read book Metallized Plastics 7 Fundamental and Applied Aspects written by Kash L. Mittal and published by CRC Press. This book was released on 2020-04-12 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the 7th Symposium on Metallized Plastics: Fundamental and Applied Aspects, held in Newark, New Jersey, December 2-3, 1999. This volume contains a total of 16 papers, which were all rigorously peer reviewed and suitably revised before inclusion. The book is divided into two parts: Metallization Techniques and Properties of Metal Deposits, and Interfacial and Adhesion Aspects. The topics covered include: various metallization techniques for a variety of plastics including some novel developments involving suitable plastic pretreatments; modification of polymers by plasma and ion-assisted reactions; metal doped plasma polymer films; metal-polyimide nanocomposite films; investigation of metal/polymer interactions by a variety of techniques; ways to improve adhesion of metal/polymer systems; modeling of metal/polymer interfaces; application of surface analytical techniques in the arena of metallized plastics; and ultrathin films on metal surfaces. This volume offers a wealth of information and represents current commentary on the R&D activity taking place in the technologically highly important field of metallized plastics and is of value and interest to anyone interested in the fundamental or applied aspects of metallized plastics.
Download or read book Polymer Surface Modification Relevance to Adhesion Volume 2 written by Kash L. Mittal and published by CRC Press. This book was released on 2023-01-06 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book chronicles the proceedings of the Second International Symposium on Polymer Surface Modification: Relevance to Adhesion held Newark, New Jersey, May 24--26, 1999. Polymeric materials are intrinsically not very adhesionable and this necessitates their surface treatment to enhance their adhesion characteristics to other materials. Since the first symposium on this topic, held in 1993, there has been a tremendous R&D activity in devising novel or ameliorating the existing techniques for surface modification of polymers. This volume contains a total of 32 papers, which have been rigorously peer-reviewed and suitably revised before inclusion in this volume. The book is divided into three parts as follows. Part 1: Plasma Surface Modification Techniques; Part 2: Other/Miscellaneous Surface Modification Techniques; and Part 3: General Papers. The topics covered include: plasma surface modification of a variety of polymers using various plasma gases; atmospheric plasma system; surface functionalization; ultrahydrophobic polymeric surfaces; metallization of plasma treated polymers; surface modification of polymers via molecular design for adhesion promotion; wet chemical methods for polymer surface modification; laser surface modification of various polymers; UV/ozone treatment; surface and interface studies of treated polymer surfaces by an array of techniques; bioadhesion of polymeric biomaterials to tissue; polymer-fiber systems; and plasma deposited coatings.
Download or read book First International Congress on Adhesion Science And Technology invited Papers written by W. J. Van Ooij and published by VSP. This book was released on 1998-12 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Festschrift documents the Proceedings of the First International Congress on Adhesion Science and Technology, held in honor of Dr. Kash Mittal on the occasion of his 50 birthday, in Amsterdam, The Netherlands, October 16-20, 1995. It contains the full accounts of the plenary and invited lectures, which are divided into the following seven parts: Part 1: Fundamental aspects of adhesion and general topics; Part 2: Contact angle, wettability and surface energetics; Part 3: Surface modification: Relevance to adhesion; Part 4: Adhesives and adhesive joints; Part 5: Adhesion aspects of polymeric coatings, and polymer-polymer interphase; Part 6: Metal-polymer and metal-ceramic adhesion; and Part 7: General papers. The topics covered include many different aspects of adhesion science and technology, and both fundamental and applied issues are addressed. The final section of this volume gives a listing of titles, authors and affiliations of the other 185 papers which were included in the technical program of the conference.
Download or read book Advanced Plasma Technology written by Riccardo d'Agostino and published by John Wiley & Sons. This book was released on 2008-09-08 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: A panel of internationally renowned scientists discuss the latest results in plasma technology. This volume has been compiled with both a didactic approach and an overview of the newest achievements for industrial applications. It is divided into two main sections. One is focused on fundamental technology, including plasma production and control, high-pressure discharges, modeling and simulation, diagnostics, dust control, and etching. The section on application technology covers polymer treatments, silicon solar cell, coating and spray, biomaterials, sterilization and waste treatment, plasma propulsion, plasma display panels, and anti-corrosion coatings. The result is an indispensable work for physicists, chemists and engineers involved in the field of plasma technology.
Download or read book The Plasma Chemistry of Polymer Surfaces written by Jörg Friedrich and published by John Wiley & Sons. This book was released on 2012-05-29 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than 99% of all visible matter in the universe occurs as highly ionized gas plasma with high energy content. Electrical low- and atmospheric-pressure plasmas are characterized by continuous source of moderate quantities of energy or enthalpy transferred predominantly as kinetic energy of electrons. Therefore, such energetically unbalanced plasmas have low gas temperature but produce sufficient energy for inelastic collisions with atoms and molecules in the gas phase, thus producing reactive species and photons, which are able to initiate all types of polymerizations or activate any surface of low reactive polymers. However, the broadly distributed energies in the plasma exceed partially the binding energies in polymers, thus initiating very often unselective reactions and polymer degradation. The intention of this book is to present new plasma processes and new plasma reactions of high selectivity and high yield. This book aims to bridge classical and plasma chemistry, particularly focusing on polymer chemistry in the bulk and on the surface under plasma exposure. The stability of surface functionalization and the qualitative and quantitative measurement of functional groups at polymer surface are featured prominently, and chemical pathways for suppressing the undesirable side effects of plasma exposure are proposed and illustrated with numerous examples. Special attention is paid to the smooth transition from inanimate polymer surfaces to modified bioactive polymer surfaces. A wide range of techniques, plasma types and applications are demonstrated.
Download or read book Polyimides and Other High Temperature Polymers Synthesis Characterization and Applications Volume 4 written by Kash L. Mittal and published by CRC Press. This book was released on 2007-07-10 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is mostly based on papers presented at the Fourth International Symposium on this topic held in Savannah, Georgia. However, in addition to these papers, certain very relevant papers have also been included to broaden the scope and thus enhance the value of this book.Currently there is tremendous interest in these material because of their
Download or read book Adhesion Aspects of Thin Films volume 2 written by Kash L. Mittal and published by CRC Press. This book was released on 2005-05-06 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the International Symposium on Adhesion Aspects of Thin Films (including Adhesion Measurement, and Metallized plastics) held in Orlando, FL, December 15-16, 2003. This volume is divided into three parts. Part 1 “General Papers”; Part 2 “Metallized Plastics”; and Part 3 “Adhesion Measurement”. The topics covered include: Factors influencing adhesion of thin films; relevance of stresses in film adhesion; surface effects on intrinsic thin film stresses; adhesion improvement; hemocompatibility of DLC coatings; thin films of various materials on a host of substrates; thin polymer films; surface modification of polymers; adhesion of metal films on polymers; investigation of metal-polymer interactions; adhesion measurement; scratch test; microscratch test; and abrasion and durability of thin films.
Download or read book Metal Polymer Systems written by Jörg Florian Friedrich and published by John Wiley & Sons. This book was released on 2017-09-18 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: The result of decades of research by a pioneer in the field, this is the first book to deal exclusively with achieving high-performance metal-polymer composites by chemical bonding. Covering both the academic and practical aspects, the author focuses on the chemistry of interfaces between metals and polymers with a particular emphasis on the chemical bonding between the different materials. He elucidates the various approaches to obtaining a stable interface, including, but not limited to, thermodynamically driven redox reactions, bond protection to prevent hydrolysis, the introduction of barrier layers, and stabilization by spacer molecules. Throughout, chemical bonding is promoted as a simple and economically viable alternative to adhesion based on reversible weak physical interaction. Consequently, the text equips readers with the practical tools necessary for designing high-strength metal-polymer composites with such desired properties as resilience, flexibility, rigidity or degradation resistance.
Download or read book Adhesion in Microelectronics written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2014-08-25 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book will provide both fundamental and applied aspects of adhesion pertaining to microelectronics in a single and easily accessible source. Among the topics to be covered include; Various theories or mechanisms of adhesion Surface (physical or chemical) characterization of materials as it pertains to adhesion Surface cleaning as it pertains to adhesion Ways to improve adhesion Unraveling of interfacial interactions using an array of pertinent techniques Characterization of interfaces / interphases Polymer-polymer adhesion Metal-polymer adhesion (metallized polymers) Polymer adhesion to various substrates Adhesion of thin films Adhesion of underfills Adhesion of molding compounds Adhesion of different dielectric materials Delamination and reliability issues in packaged devices Interface mechanics and crack propagation Adhesion measurement of thin films and coatings
Download or read book Dekker Encyclopedia of Nanoscience and Nanotechnology written by James A. Schwarz and published by CRC Press. This book was released on 2004 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt:
