Download or read book Handbook of Recycling written by Ernst Worrell and published by Newnes. This book was released on 2014-04-28 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of the International Solid Waste Association's 2014 Publication Award, Handbook of Recycling is an authoritative review of the current state-of-the-art of recycling, reuse and reclamation processes commonly implemented today and how they interact with one another. The book addresses several material flows, including iron, steel, aluminum and other metals, pulp and paper, plastics, glass, construction materials, industrial by-products, and more. It also details various recycling technologies as well as recovery and collection techniques. To completely round out the picture of recycling, the book considers policy and economic implications, including the impact of recycling on energy use, sustainable development, and the environment. With contemporary recycling literature scattered across disparate, unconnected articles, this book is a crucial aid to students and researchers in a range of disciplines, from materials and environmental science to public policy studies. Portrays recent and emerging technologies in metal recycling, by-product utilization and management of post-consumer waste Uses life cycle analysis to show how to reclaim valuable resources from mineral and metallurgical wastes Uses examples from current professional and industrial practice, with policy and economic implications

Download or read book Metal Recovery and Reuse Using an Integrated Vermiculite Ion Exchange acid Recovery System written by Gary B. Keefer and published by . This book was released on 198? with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recycling and Reuse of Material Found on Superfund Sites written by Lawrence Smith and published by DIANE Publishing. This book was released on 1995-02 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides assistance in identifying recycling technologies for a wide variety of contaminants and matrices, including: energy recovery; decanting; thermal desorption; solvent extraction; pumping and recovery; freeze-crystallization; thermolysis; ion exchange; reverse osmosis; diffusion dialysis; evaporation; amalgamation; cementation; electrowinning; vitrification; physical separation; mercury distillation, etc. Contents: description of recycling technologies; product quality specifications; 8 case studies. Extensive references. 50 charts and tables.

Download or read book Metal Recovery and Reuse from Acid Mine Drainage written by Jeffrey Allen and published by . This book was released on 1999 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal Recycling Experience at Los Alamos National Laboratory Reuse Release and Recycle of Metals from Radiological Control Areas written by and published by . This book was released on 1997 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approximately 15% of the Low-Level Waste (LLW) produced at Los Alamos consists of scrap metal equipment and materials. The majority of this material is produced by decommissioning and the modification of existing facilities. To reduce this waste stream, Department of Energy Headquarters, EM-77 Office, sponsored the Reuse, Recycle, and Release of Metals from Radiological Control Areas High Return on Investment (ROI) Project to implement recycle, reuse, and release of scrap metal at the laboratory. The goal of this project was to develop cost effective alternatives to LLW disposal of scrap metal and to avoid the disposal of 2,400 m3 of scrap metal. The ROI for this project was estimated at 948%. The ROI project was funded in March 1996 and is scheduled for completion by October 1997. At completion, a total of 2,400 m3 of LLW avoidance will have been accomplished and a facility to continue recycling activities will be operational. This paper will present the approach used to develop effective alternatives for scrap metal at Los Alamos and then discuss the tasks identified in the approach in detail. Current scrap metal inventory, waste projections, alternatives to LLW disposal, regulatory guidance, and efforts to institutionalize the alternatives to LLW disposal will be discussed in detail.

Download or read book Metals in Wastes written by Karolina Wieszczycka and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-07-23 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals in Wastes is an excellent guide for scientists, students, engineers, chemists, and industrial chemists who are looking for knowledge of the main sources of metals in industrial wastes. Metals are valuable materials that can be recycled again and again without degrading their properties. The recycling of metals enables us to preserve natural resources while requiring less energy to process than the manufacture of new products using virgin raw materials. A team of experts reviews the state-of-the-art and provides the readers not only with a comprehensive in-depth overview of the main composition of wastes but also discloses innovative methods which have been applied for recovery of critical and valuable metals in petrochemical industry, rubber, energy and automotive industries. This know-how could be considered as a useful reference tool for moving towards the zero-waste economy. Additionally, the book describes the economic aspects of metals recovery from various sources. This is essential for those already involved in the metals business and also for the financial, investment and advisory community internationally.

Download or read book Waste Production and Utilization in the Metal Extraction Industry written by Sehliselo Ndlovu and published by CRC Press. This book was released on 2017-06-27 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasingly stringent environmental regulations and industry adoption of waste minimization guidelines have thus, stimulated the need for the development of recycling and reuse options for metal related waste. This book, therefore, gives an overview of the waste generation, recycle and reuse along the mining, beneficiation, extraction, manufacturing and post-consumer value chain. This book reviews current status and future trends in the recycling and reuse of mineral and metal waste and also details the policy and legislation regarding the waste management, health and environmental impacts in the mining, beneficiation, metal extraction and manufacturing processes. This book is a useful reference for engineers and researchers in industry, policymakers and legislators in governance, and academics on the current status and future trends in the recycling and reuse of mineral and metal waste. Some of the key features of the book are as follows: Holistic approach to waste generation, recycling and reuse along the minerals and metals extraction. Detailed overview of metallurgical waste generation. Practical examples with complete flow sheets, techniques and interventions on waste management. Integrates the technical issues related to efficient resources utilization with the policy and regulatory framework. Novel approach to addressing future commodity shortages.

Download or read book Waste Reduction Activities and Options for a Scrap Metal Recovery Facility written by Hanna Saqa and published by . This book was released on 1992 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book E Waste in Transition written by Florin-Constantin Mihai and published by BoD – Books on Demand. This book was released on 2016-06-29 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: E-waste management is a serious challenge across developed, transition, and developing countries because of the consumer society and the globalization process. E-waste is a fast-growing waste stream which needs more attention of international organizations, governments, and local authorities in order to improve the current waste management practices. The book reveals the pollution side of this waste stream with critical implications on the environment and public health, and also it points out the resource side which must be further developed under the circular economy framework with respect to safety regulations. In this context, complicated patterns at the global scale emerge under legal and illegal e-waste trades. The linkages between developed and developing countries and key issues of e-waste management sector are further examined in the book.

Download or read book Metal Finishing written by and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal Recovery and Reuse written by Jeffrey W. Allen and published by . This book was released on 2000 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Berkeley Pit, located in Butte, Montana, is one of the largest EPA Superfund sites. The water in the Pit accumulates at a rate of approximately 5 million gallons per day. The water contains substantial quantities of valuable, yet toxic, metals, such as copper, zinc, manganese, and aluminum, as well as iron. This work details a treatment option for remediating the Berkeley Pit by separating and recovering the individual metals. First, a review of metal precipitations and applications is covered. Then, a series of batch experiments was performed that determined optimal pH for maximum metal recovery. Other factors, such as reactor design and temperature, were not found to be significant. After obtaining the recovery relations, a continuously operated process was constructed that treated Berkeley Pit water. The process was able to remove aluminum, copper, iron, manganese, and zinc from solution. A copper and zinc sulfide precipitate with 95% purity was produced as well as a 90% pure aluminum hydroxide precipitate. Purity of ferrous sulfide precipitate varied in the range of 54% to 95%, depending on the extent of coprecipitation of manganese resulting from localized regions of high pH around the injection point of potassium hydroxide solution. Overall, the treatment process was able to remove more than 95% of aluminum, cobalt, copper, iron, manganese, nickel and zinc with some removal of calcium, chromium and magnesium. In addition to recovering the metals, attempts were made to synthesize goethite, a high-value iron oxide. The reactor was able to produce goethite from ferrous sulfate solutions but produced spherical goethite particles using Berkeley Pit water. Several SEM images are included that show the products obtained.

Download or read book Recycling and Reuse of Industrial Wastes written by Lawrence A. Smith and published by . This book was released on 1995 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal Sustainability written by Reed M. Izatt and published by John Wiley & Sons. This book was released on 2016-07-29 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sustainable use of natural resources is an important global challenge, and improved metal sustainability is a crucial goal for the 21st century in order to conserve the supply of critical metals and mitigate the environmental and health issues resulting from unrecovered metals. Metal Sustainability: Global Challenges, Consequences and Prospects discusses important topics and challenges associated with sustainability in metal life cycles, from mining ore to beneficiation processes, to product manufacture, to recovery from end-of-life materials, to environmental and health concerns resulting from generated waste. The broad perspective presented highlights the global interdependence of the many stages of metal life cycles. Economic issues are emphasized and relevant environmental, health, political, industrial and societal issues are discussed. The importance of applying green chemistry principles to metal sustainability is emphasized. Topics covered include: • Recycling and sustainable utilization of precious and specialty metals • Formal and informal recycling from electronic and other high-tech wastes • Global management of electronic wastes • Metal reuse and recycling in developing countries • Effects of toxic and other metal releases on the environment and human health • Effect on bacteria of toxic metal release • Selective recovery of platinum group metals and rare earth metals • Metal sustainability from a manufacturing perspective • Economic perspectives on sustainability, mineral development, and metal life cycles • Closing the Loop – Minerals Industry Issues The aim of this book is to improve awareness of the increasingly important role metals play in our high-tech society, the need to conserve our metal supply throughout the metal life cycle, the importance of improved metal recycling, and the effects that unhindered metal loss can have on the environment and on human health.

Download or read book Metal Recycling written by and published by UN. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal recycling is a complex business that is becoming increasingly difficult! Recycling started long ago, when people realized that it was more resource- and cost-efficient than just throwing away the resources and starting all over again. In this report, we discuss how to increase metal-recycling rates - and thus resource efficiency - from both quantity and quality viewpoints. The discussion is based on data about recycling input, and the technological infrastructure and worldwide economic realities of recycling. Decision-makers set increasingly ambitious targets for recycling, but far too much valuable metal today is lost because of the imperfect collection of end-of-life (EoL) products, improper practices, or structural deficiencies within the recycling chain, which hinder achieving our goals of high resource efficiency and resource security, and of better recycling rates.

Download or read book Flash Smelting written by W. G. Davenport and published by Elsevier. This book was released on 2015-05-11 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flash Smelting: Analysis, Control and Optimization deals with the analysis, control, and optimization of flash smelting. This book explores flash smelting in general and Outokumpu and Inco flash smelting in particular, and also presents a mathematical description for the flash smelting process. A set of mass and heat balance equations that can be used to describe steady state smelting under autogenous or nearautogenous smelting conditions is developed. This text has 20 chapters and begins with an overview of flash smelting and its products; the main raw materials of copper flash smelting; chemical reactions in the flash furnace; impurities in the concentrates that are fed to the flash furnace; and the operation of industrial flash furnaces. Attention then turns to Outokumpu flash smelting, Inço flash smelting, and mathematical representation of flash smelting. The chapters that follow focus on the effects of blast preheat on flash smelting; the combustion of fossil fuel in the flash furnace; and the effect of matte grade on the fossil fuel, industrial oxygen, and blast preheat requirements of flash smelting. Equations are used to determine the effects of such factors as concentrate composition, blast temperature, and dust carryout, and as the basis for optimizing and controlling the flash smelting process. This book will be of interest to both mathematicians and metallurgists.

Download or read book Waste Electrical and Electronic Equipment Recycling written by Francesco Vegliò and published by Woodhead Publishing. This book was released on 2018-05-18 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water Electrical and Electronic Equipment Recycling: Aqueous Recovery Methods provides data regarding the implementation of aqueous methods of processing of WEEEs at the industrial level. Chapters explore points-of-view of worldwide researchers and research project managers with respect to new research developments and how to improve processing technologies. The text is divided into two parts, with the first section addressing the new research regarding the hydrometallurgical procedures adopted from minerals processing technologies. Other sections cover green chemistry, bio-metallurgy applications for WEEE treatment and the current developed aqueous methods at industrial scale. A conclusion summarizes existing research with suggestions for future actions. Provides a one-stop reference for hydrometallurgical processes of metal recovery from WEEE Includes methods presented through intended applications, including waste printed circuit boards, LCD panels, lighting and more Contains suggestions and recommendations for future actions and research prospects

Download or read book Recovery and Recycling of Valuable Metals written by Dariush Azizi and published by Mdpi AG. This book was released on 2022-01-27 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals have always played a significant role in human life, and the current global growth and prosperity are directly dependent on these materials. With the rapidly growing global demand for metals, their extraction from natural minerals (as their primary sources) has been enhanced, causing a significant reduction in the grade and quality of the ores in ore deposits and leading to the production of huge amounts of waste, which requires management. In light of this, new proposals to develop more advanced metal recovery technologies from minerals are needed. Additionally, the huge quantity of waste generated through all steps of metal production is known to be a source of environmental pollution, while its valorization can create value via recycling metals or even though use in the production of other valuable materials. Such waste valorization is also in line with the United Nations' Sustainable Development Goals (SDGs), as well as the implementation of the Paris Agreement. In this regard, the recycling of end-user products in order to reproduce valuable metals can also create significant value and reduce mining activities, and thus, their harmful consequences worldwide. Therefore, research and development in the state-of-the-art technologies for the recovery and recycling of metals are absolutely necessary. The aim of this Special Issue was to collect a range of articles on different aspects of valuable metal recovery and recycling from primary and secondary sources, as well as to decipher all new methods, processes, and knowledge in valuable metal production. We hope that this open access Special Issue will provide a great opportunity to demonstrate the work of researchers working in this area all around the world and help to provide new ideas for researchers who are working in the areas of hydrometallurgy, mineral processing, and waste recycling and valorization.