Download or read book Applications of Laser Ablation written by Dongfang Yang and published by BoD – Books on Demand. This book was released on 2016-12-21 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser ablation refers to the phenomenon in which a low wavelength and short pulse (ns-fs) duration of laser beam irradiates the surface of a target to induce instant local vaporization of the target material generating a plasma plume consisting of photons, electrons, ions, atoms, molecules, clusters, and liquid or solid particles. This book covers various aspects of using laser ablation phenomenon for material processing including laser ablation applied for the deposition of thin films, for the synthesis of nanomaterials, and for the chemical compositional analysis and surface modification of materials. Through the 18 chapters written by experts from international scientific community, the reader will have access to the most recent research and development findings on laser ablation through original research studies and literature reviews.
Download or read book Laser Ablation in Liquids written by Guowei Yang and published by CRC Press. This book was released on 2012-02-22 with total page 1166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the fundamental concepts and physical and chemical aspects of pulsed laser ablation of solid targets in liquid environments and its applications in the preparation of nanomaterials and fabrication of nanostructures. The areas of focus include basic thermodynamic and kinetic processes of laser ablation in liquids, and its applic
Download or read book Handbook of Laser Micro and Nano Engineering written by KOJI SUGIOKA. and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a comprehensive review of the entire field of laser micro and nano processing, including not only a detailed introduction to individual laser processing techniques but also the fundamentals of laser-matter interaction and lasers, optics, equipment, diagnostics, as well as monitoring and measurement techniques for laser processing. Consisting of 11 sections, each composed of 4 to 6 chapters written by leading experts in the relevant field. Each main part of the handbook is supervised by its own part editor(s) so that high-quality content as well as completeness are assured. The book provides essential scientific and technical information to researchers and engineers already working in the field as well as students and young scientists planning to work in the area in the future. Lasers found application in materials processing practically since their invention in 1960, and are currently used widely in manufacturing. The main driving force behind this fact is that the lasers can provide unique solutions in material processing with high quality, high efficiency, high flexibility, high resolution, versatility and low environmental load. Macro-processing based on thermal process using infrared lasers such as CO2 lasers has been the mainstream in the early stages, while research and development of micro- and nano-processing are becoming increasingly more active as short wavelength and/or short pulse width lasers have been developed. In particular, recent advances in ultrafast lasers have opened up a new avenue to laser material processing due to the capabilities of ultrahigh precision micro- and nanofabrication of diverse materials. This handbook is the first book covering the basics, the state-of-the-art and important applications of the dynamic and rapidly expanding discipline of laser micro- and nanoengineering. This comprehensive source makes readers familiar with a broad spectrum of approaches to solve all relevant problems in science and technology. This handbook is the ultimate desk reference for all people working in the field.
Download or read book Nano Antimicrobials written by Nicola Cioffi and published by Springer Science & Business Media. This book was released on 2012-02-26 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a high demand for antimicrobials for the treatment of new and emerging microbial diseases. In particular, microbes developing multidrug resistance have created a pressing need to search for a new generation of antimicrobial agents, which are effective, safe and can be used for the cure of multidrug-resistant microbial infections. Nano-antimicrobials offer effective solutions for these challenges; the details of these new technologies are presented here. The book includes chapters by an international team of experts. Chemical, physical, electrochemical, photochemical and mechanical methods of synthesis are covered. Moreover, biological synthesis using microbes, an option that is both eco-friendly and economically viable, is presented. The antimicrobial potential of different nanoparticles is also covered, bioactivity mechanisms are elaborated on, and several applications are reviewed in separate sections. Lastly, the toxicology of nano-antimicrobials is briefly assessed.
Download or read book Pulsed Laser Induced Nanostructures in Liquids for Energy and Environmental Applications written by Myong Yong Choi and published by Elsevier. This book was released on 2024-07-19 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulsed Laser Induced Nanostructures in Liquids for Energy and Environmental Applications covers fundamental insights on the mechanism of pulsed laser techniques by considering various experimental conditions to accelerate hypotheses that are appropriate for the production of efficient nanomaterials. In this book, readers will learn about the major advancements in the field of pulsed laser technologies during the past decades, current applications, and future impacts of pulsed laser technologies. This book provides a comprehensive overview of the development of nanostructured catalytic materials via pulsed laser techniques, their use as energy, environment-related applications and their present trend in the industry and market. It also highlights the latest advances related to the application of these nanostructured materials produced via pulsed laser in liquid techniques in various energy (supercapacitor, batteries, and hydrogen production) and environmental remediation (wastewater treatment and conversion of waste into value-added product) processes. Recent progress on several kinds of both photo and electroactive nanomaterials is reviewed, and essential aspects which govern catalytic behaviors, and the corresponding stability, are discussed. - Provides basic principles of pulsed laser–matter interaction, with a focus on the resulting material responses compared to other conventional techniques and state-of-the-art applications - Offers comprehensive coverage of pulsed laser induced nanomaterials and their potential energy and environmental applications - Examines the properties of pulsed laser induced nanostructures that make them so adaptable
Download or read book Emerging Applications of Nanoparticles and Architectural Nanostructures written by Abdel Salam Hamdy Makhlouf and published by William Andrew. This book was released on 2018-03-22 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging Applications of Nanoparticles and Architecture Nanostructures: Current Prospects and Future Trends discusses the most important current applications of nanoparticles and architecture nanostructures in a comprehensive, detailed manner. The book covers major applications of nanoparticles and architecture nanostructures, taking into account their unusual shapes and high surface areas. In particular, coverage is given to applications in aerospace, automotive, batteries, sensors, smart textile design, energy conversion, color imaging, printing, computer chips, medical implants, pharmacy, cosmetics, and more. In addition, the book discusses the future of research in these areas. This is a valuable reference for both materials scientists, chemical and mechanical engineers working both in R&D and academia who want to learn more on how nanoparticles and nanomaterials are commercially applied. - Provides an in-depth look at the properties of nanoparticles and architecture nanostructures in terms of their applicability for industrial uses - Analyzes the most recent advances and industrial applications of different types of nanoparticles and architecture nanostructures, taking into account their unusual structures and compositions - Identifies novel nanometric particles and architectures that are of particular value for applications and the techniques required to use them effectively
Download or read book Bacterial Pathogenesis and Antibacterial Control written by Sahra Kırmusaoğlu and published by BoD – Books on Demand. This book was released on 2018-05-30 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bacterial pathogens have been becoming the main problem in hospital and community-acquired infections. It is hard to treat the strains that are resistant to antibiotics, due to the causing recurrent and untreatable infections. In recent years, the combination treatments and the novel technologies have been preferred to overcome the emergence of antibacterial resistance of pathogens. In this book, examples of pathogenesis by clinical cases, control by antibiotics and bioactive antimicrobials, control by novel technologies with the collection of up-to-date researches and reviews are presented. This book can be useful for researchers interested in antibacterials, bioactive compounds, and novel technologies.
Download or read book Oxide Nanostructures written by Avanish Kumar Srivastava and published by CRC Press. This book was released on 2014-04-09 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials, their synthesis, and property studies have been an obsession with modern current physicists, chemist, and materials scientists for their vast array of technological implications and the remarkable way their properties are modified or enhanced when the size dimensions are reduced to the realm of nanometers. Although nanomaterials, for
Download or read book Colloidal Metal Oxide Nanoparticles written by and published by Elsevier. This book was released on 2019-10-16 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloidal Metal Oxide Nanoparticles: Synthesis, Characterization and Applications is a one-stop reference for anyone with an interest in the fundamentals, synthesis and applications of this interesting materials system. The book presents a simple, effective and detailed discussion on colloidal metal oxide nanoparticles. It begins with a general introduction of colloidal metal oxide nanoparticles, then delves into the most relevant synthesis pathways, stabilization procedures, and synthesis and characterization techniques. Final sections discuss promising applications, including bioimaging, biosensing, diagnostic, and energy applications—i.e., solar cells, supercapacitors and environment applications—i.e., the treatment of contaminated soil, water purification and waste remediation. - Provides the most comprehensive resource on the topic, from fundamentals, to synthesis and characterization techniques - Presents key applications, including biomedical, energy, electronic and environmental - Discusses the most relevant techniques for synthesis, patterning and characterization
Download or read book Laser Ablation written by John C. Miller and published by Springer Science & Business Media. This book was released on 2013-11-09 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Ablation provides a broad picture of the current understanding of laser ablation and its many applications, from the views of key contributors to the field. Discussed are in detail the electronic processes in laser ablation of semiconductors and insulators, the post-ionization of laser-desorbed biomolecules, Fourier-transform mass spectroscopy, the interaction of laser radiation with organic polymers, laser ablation and optical surface damage, laser desorption/ablation with laser detection, and laser ablation of superconducting thin films.
Download or read book Laser Based Nano Fabrication and Nano Lithography written by Koji Sugioka and published by MDPI. This book was released on 2018-12-07 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Laser-Based Nano Fabrication and Nano Lithography" that was published in Nanomaterials
Download or read book Multifunctional Nanocomposites for Energy and Environmental Applications written by Zhanhu Guo and published by John Wiley & Sons. This book was released on 2018-01-02 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dieses klar strukturierte Fachbuch legt den Schwerpunkt auf praktische Anwendungen von Nanokompositen und Nanotechnologien im Rahmen einer nachhaltigen Entwicklung. Es zeigt, wie Nanokomposite zur Lösung von Energie- und Umweltproblemen beitragen können, bietet zusätzlich einen breiten Überblick über Anwendungen im Energiebereich und behandelt eine einzigartige Auswahl an Umweltthemen. Der erste Teil beschäftigt sich mit Anwendungen wie Lithium-Ionen-Batterien, Solarzellen, Katalyse, Gewinnung von Wärme und Energie aus Abfällen mithilfe der Thermoelektrizität und Wasserspaltung. Der zweite Teil beleuchtet in einzigartiger Weise ökologische Themen, darunter Atommüllmanagement sowie die Abscheidung und Speicherung von Kohlendioxid. Dieses Fachbuch vermittelt auf erfolgreiche Weise Grundlagenwissen für Einsteiger als auch die neuesten Erkenntnisse für erfahrene Wissenschaftler, Ingenieure und Forscher aus der Industrie.
Download or read book Nanostructured Metal Oxides and Devices written by M. K. Jayaraj and published by Springer Nature. This book was released on 2020-04-16 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book primarily covers the fundamental science, synthesis, characterization, optoelectronic properties, and applications of metal oxide nanomaterials. It discusses the basic aspects of synthetic procedures and fabrication technologies, explains the related experimental techniques and also elaborates on the current status of nanostructured oxide materials and related devices. Two major aspects of metal oxide nanostructures – their optical and electrical properties – are described in detail. The first five chapters focus on the optical characteristics of semiconducting materials, especially metal oxides at the nanoscale. The following five chapters discuss the electrical properties observed in metal oxide-based semiconductors and the status quo of device-level developments in a variety of applications such as sensors, transistors, dilute magnetic semiconductors, and dielectric materials. The basic science and mechanism behind the optoelectronic phenomena are explained in detail, to aid readers interested in the structure–property symbiosis in semiconducting nanomaterials. In short, the book offers a valuable reference guide for researchers and academics in the areas of material science and semiconductor technology, especially nanophotonics and electronics.
Download or read book Recent Progress in Antimicrobial Nanomaterials written by Ana María Díez-Pascual and published by MDPI. This book was released on 2021-01-20 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a fundamental understanding of the interaction between bacteria and nanomaterials, this book highlights the latest research on the antimicrobial properties of nanomaterials and provides an invaluable blueprint for improving the antimicrobial performance of devices and products. This book introduces the reader to the progress being made in the field, followed by an outline of applications in different areas. Various methods and techniques of synthesis and characterization are detailed. The content provides insight into the ongoing research, current trends, and technical challenges in this rapidly progressing field. Therefore, this book is highly suitable for materials scientists, engineers, biologists, and technologists.
Download or read book Acts of the General Assembly of His Majesty s Province of New Brunswick written by New Brunswick and published by . This book was released on 1860 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Conference on Material Science and Material Engineering MSME2014 written by Mrinal Pal, and published by DEStech Publications, Inc. This book was released on 2014-06-02 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MSME2014 is hosted by Advanced Information Science Research Center (AISRC) and is sponsored by DEStech Publications, Inc., University of East Asia, University of Mysore and Reitaku University. MSME2014 aims to provide an excellent international academic forum for sharing knowledge and results in theory, methodology and applications in the aspects of material science and material engineering. This MSME2014 proceedings tends to collect the up-to-date, comprehensive and worldwide state-of-art knowledge on material science and material engineering, including material composites, ceramic, metal alloy material, polymer material, building materials, environmental friendly material, material performance, etc. All of accepted papers were subjected to strict peer- reviewing by 2–4 expert referees. The papers have been selected for this volume because of quality and the relevance to the conference. We hope this book will not only provide the readers a broad overview of the latest research results, but also provide the readers a valuable summary and reference in these fields.
Download or read book Synthesis of Inorganic Nanomaterials written by Sneha Bhagyaraj and published by Woodhead Publishing. This book was released on 2018-06-29 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesis of Inorganic Nanomaterials: Advances and Key Technologies discusses the latest advancements in the synthesis of various types of nanomaterials. The book's main objective is to provide a comprehensive review regarding the latest advances in synthesis protocols that includes up-to-date data records on the synthesis of all kinds of inorganic nanostructures using various physical and chemical methods. The synthesis of all important nanomaterials, such as carbon nanostructures, Core-shell Quantum dots, Metal and metal oxide nanostructures, Nanoferrites, polymer nanostructures, nanofibers, and smart nanomaterials are discussed, making this a one-stop reference resource on research accomplishments in this area. Leading researchers from industry, academia, government and private research institutions across the globe have contributed to the book. Academics, researchers, scientists, engineers and students working in the field of polymer nanocomposites will benefit from its solutions for material problems. - Provides an up-to-date data record on the synthesis of all kinds of organic and inorganic nanostructures using various physical and chemical methods - Presents the latest advances in synthesis protocols - Includes the latest techniques used in the physical and chemical characterization of nanomaterials - Covers the characterization of all the important materials groups, such as carbon nanostructures, core-shell quantum dots, metal and metal oxide nanostructures, Nano ferrites, polymer nanostructures and nanofibers
