Download or read book Routledge French Technical Dictionary Dictionnaire technique anglais written by Yves Arden and published by Routledge. This book was released on 2006-03-21 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt: The French-English volume of this highly acclaimed set consists of some 100,000 keywords in both French and English, drawn from the whole range of modern applied science and technical terminology. Covers over 70 subject areas, from engineering and chemistry to packaging, transportation, data processing and much more.
Download or read book A Guide to the Preventive Conservation of Photograph Collections written by Bertrand Lavédrine and published by Getty Publications. This book was released on 2003 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: A resource for the photographic conservator, conservation scientist, curator, as well as professional collector, this volume synthesizes both the masses of research that has been completed to date and the international standards that have been established on the subject.
Download or read book Infonomics written by Douglas B. Laney and published by Routledge. This book was released on 2017-09-05 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many senior executives talk about information as one of their most important assets, but few behave as if it is. They report to the board on the health of their workforce, their financials, their customers, and their partnerships, but rarely the health of their information assets. Corporations typically exhibit greater discipline in tracking and accounting for their office furniture than their data. Infonomics is the theory, study, and discipline of asserting economic significance to information. It strives to apply both economic and asset management principles and practices to the valuation, handling, and deployment of information assets. This book specifically shows: CEOs and business leaders how to more fully wield information as a corporate asset CIOs how to improve the flow and accessibility of information CFOs how to help their organizations measure the actual and latent value in their information assets. More directly, this book is for the burgeoning force of chief data officers (CDOs) and other information and analytics leaders in their valiant struggle to help their organizations become more infosavvy. Author Douglas Laney has spent years researching and developing Infonomics and advising organizations on the infinite opportunities to monetize, manage, and measure information. This book delivers a set of new ideas, frameworks, evidence, and even approaches adapted from other disciplines on how to administer, wield, and understand the value of information. Infonomics can help organizations not only to better develop, sell, and market their offerings, but to transform their organizations altogether. "Doug Laney masterfully weaves together a collection of great examples with a solid framework to guide readers on how to gain competitive advantage through what he labels "the unruly asset" – data. The framework is comprehensive, the advice practical and the success stories global and across industries and applications." Liz Rowe, Chief Data Officer, State of New Jersey "A must read for anybody who wants to survive in a data centric world." Shaun Adams, Head of Data Science, Betterbathrooms.com "Phenomenal! An absolute must read for data practitioners, business leaders and technology strategists. Doug's lucid style has a set a new standard in providing intelligible material in the field of information economics. His passion and knowledge on the subject exudes thru his literature and inspires individuals like me." Ruchi Rajasekhar, Principal Data Architect, MISO Energy "I highly recommend Infonomics to all aspiring analytics leaders. Doug Laney’s work gives readers a deeper understanding of how and why information should be monetized and managed as an enterprise asset. Laney’s assertion that accounting should recognize information as a capital asset is quite convincing and one I agree with. Infonomics enjoyably echoes that sentiment!" Matt Green, independent business analytics consultant, Atlanta area "If you care about the digital economy, and you should, read this book." Tanya Shuckhart, Analyst Relations Lead, IRI Worldwide
Download or read book Powder Metallurgy International written by and published by . This book was released on 1973 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low Speed Wind Tunnel Testing written by Jewel B. Barlow and published by John Wiley & Sons. This book was released on 1999-02-22 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: A brand-new edition of the classic guide on low-speed wind tunnel testing While great advances in theoretical and computational methods have been made in recent years, low-speed wind tunnel testing remains essential for obtaining the full range of data needed to guide detailed design decisions for many practical engineering problems. This long-awaited Third Edition of William H. Rae, Jr.'s landmark reference brings together essential information on all aspects of low-speed wind tunnel design, analysis, testing, and instrumentation in one easy-to-use resource. Written by authors who are among the most respected wind tunnel engineers in the world, this edition has been updated to address current topics and applications, and includes coverage of digital electronics, new instrumentation, video and photographic methods, pressure-sensitive paint, and liquid crystal-based measurement methods. The book is organized for quick access to topics of interest, and examines basic test techniques and objectives of modeling and testing aircraft designs in low-speed wind tunnels, as well as applications to fluid motion analysis, automobiles, marine vessels, buildings, bridges, and other structures subject to wind loading. Supplemented with real-world examples throughout, Low-Speed Wind Tunnel Testing, Third Edition is an indispensable resource for aerospace engineering students and professionals, engineers and researchers in the automotive industries, wind tunnel designers, architects, and others who need to get the most from low-speed wind tunnel technology and experiments in their work.
Download or read book Image Correlation for Shape Motion and Deformation Measurements written by Michael A. Sutton and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Image Correlation for Shape, Motion and Deformation Measurements provides a comprehensive overview of data extraction through image analysis. Readers will find and in-depth look into various single- and multi-camera models (2D-DIC and 3D-DIC), two- and three-dimensional computer vision, and volumetric digital image correlation (VDIC). Fundamentals of accurate image matching are described, along with presentations of both new methods for quantitative error estimates in correlation-based motion measurements, and the effect of out-of-plane motion on 2D measurements. Thorough appendices offer descriptions of continuum mechanics formulations, methods for local surface strain estimation and non-linear optimization, as well as terminology in statistics and probability. With equal treatment of computer vision fundamentals and techniques for practical applications, this volume is both a reference for academic and industry-based researchers and engineers, as well as a valuable companion text for appropriate vision-based educational offerings.
Download or read book Foundations of Mechanical Accuracy written by Wayne and published by . This book was released on 1971-05-15 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: In his introduction to this book, George R. Harrison, Dean Emeritus of M.I.T.'s School of Science, writes as follows: "Basic to man's behavior is his ability to determine, modify, and adapt to his environment. This he has been able to do in proportion to his skill at making measurements, and fundamental to all other measuring operations is his ability to determine locations in the material world. Thus the science of mechanical measurements is a fundamental one. It is this science, and the art which accompanies and informs it, with which this book is concerned." This is the third book produced by the , Inc., of Bridgeport, Connecticut. Like all of its products, the book is marked by a clean precision of design and execution. The firm has built a worldwide reputation since 1924, both as a manufacturer of special tooling to extremely close accuracies and of machine tools that make possible a very high degree of precision. Wayne R. Moore has assembled in the 350 pages of Foundations of Mechanical Accuracythe company's intimate knowledge of and experience with mechanical accuracy, and how to achieve it. He has illustrated his text with over 500 original photographs and drawings. This book tells how to attain precision in manufacturing to millionths of an inch and how to control such precision by appropriate measuring techniques. The book is divided into four main sections: geometry, standards of length, dividing the circle, and roundness. A fifth section covers "Universal Measuring Machine Techniques and Applications." The book is printed in two colors throughout, and interspersed with full-page, full-color plates.
Download or read book 6th International Conference on the Conservation of Earthen Architecture written by The Getty Conservation Institute and published by Getty Publications. This book was released on 1991-02-28 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: On October 14-19, 1990, the 6th International Conference on the Conservation of Earthen Architecture was held in Las Cruces, New Mexico. Sponsored by the GCI, the Museum of New Mexico State Monuments, ICCROM, CRATerre-EAG, and the National Park Service, under the aegis of US/ICOMOS, the event was organized to promote the exchange of ideas, techniques, and research findings on the conservation of earthen architecture. Presentations at the conference covered a diversity of subjects, including the historic traditions of earthen architecture, conservation and restoration, site preservation, studies in consolidation and seismic mitigation, and examinations of moisture problems, clay chemistry, and microstructures. In discussions that focused on the future, the application of modern technologies and materials to site conservation was urged, as was using scientific knowledge of existing structures in the creation of new, low-cost, earthen architecture housing.
Download or read book Manual of Engineering Drawing written by Colin H. Simmons and published by Elsevier. This book was released on 2003-10-21 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Manual of Engineering Drawing has long been recognised as the student and practising engineer's guide to producing engineering drawings that comply with ISO and British Standards. The information in this book is equally applicable to any CAD application or manual drawing. The second edition is fully in line with the requirements of the new British Standard BS8888: 2002, and will help engineers, lecturers and students with the transition to the new standards.BS8888 is fully based on the relevant ISO standards, so this book is also ideal for an international readership. The comprehensive scope of this book encompasses topics including orthographic, isometric and oblique projections, electric and hydraulic diagrams, welding and adhesive symbols, and guidance on tolerancing.Written by a member of the ISO committee and a former college lecturer, the Manual of Engineering Drawing combines up-to-the-minute technical accuracy with clear, readable explanations and numerous diagrams. This approach makes this an ideal student text for vocational courses in engineering drawing and undergraduates studying engineering design / product design.Colin Simmons is a member of the BSI and ISO Draughting Committees and an Engineering Standards Consultant. He was formerly Standards Engineer at Lucas CAV.* Fully in line with the latest ISO Standards* A textbook and reference guide for students and engineers involved in design engineering and product design* Written by a former lecturer and a current member of the relevant standards committees
Download or read book Proceedings of Third International Symposium on Wood Machining written by Parviz Navi and published by EPFL Press. This book was released on 2007-01-01 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Complete Book of Clean written by Toni Hammersley and published by Simon and Schuster. This book was released on 2017-04-11 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The follow-up to the bestselling Complete Book of Home Organization, the Complete Book of Clean is a foolproof, eco-friendly guide to cleaning your home ... Learn the best seasons to tackle home projects, storage solutions to simplify the process and teach even the messiest kids to clean up after themselves. This book will help you tackle every mess, stain and dust-magnet, and keep things from getting out of hand in the future--all while being friendly to the environment and keeping toxic chemicals out of your home. Whether you're a neat freak or new to the world of homekeeping, let Toni Hammersley be your guide to establishing routines, learning techniques and mastering the best home cleaning hacks out there."--
Download or read book Precision Measurement and Fundamental Constants Proceedings written by United States. National Bureau of Standards and published by . This book was released on 1971 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Iranian Plateau during the Bronze Age written by Collectif and published by MOM Éditions. This book was released on 2020-03-19 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book compiles a portion of the contributions presented during the symposium “Urbanisation, commerce, subsistence and production during the third millennium BC on the Iranian Plateau”, which took place at the Maison de l’Orient et de la Méditerranée in Lyon, the 29-30 of April, 2014. The twenty papers assembled provide an overview of the recent archaeological research on this region of the Middle East during the Bronze Age. The socio-economic transformation from rural villages to towns and nations has prompted many questions into this evolution of urbanisation. What was the impact of interactions between cultures in the Iranian Plateau and the surrounding regions (Mesopotamia, the South Caucasus, Central Asia, Indus Valley)? What was the overall context during the Bronze Age on the Iranian Plateau? What was the extent and means of the expansion of the Kuro-Araxe culture? How did the Elamite Kingdom become established? What new knowledge has been contributed by the recent excavations and studies undertaken in the east of Iran? What was the influence of the Indus Valley culture, known as an epicentre of urbanisation in South Asia? What are the unique characteristics of the ancient cultures in Iran? While the urbanisation of early Mesopotamia has been the subject of much debate for several decades, this topic has only recently been raised in respect to the Iranian Plateau. This volume is the product of an international community from Iranian, European, and American institutions, consisting of recognised specialists in the archaeology of the Iranian Bronze Age. It provides an overview of the latest research, including abundant results from current on-going excavations. The current state of archaeological research in Iran, comprising many dynamic questions and perspectives, is presented here in the form of original contributions on the first emergence of towns in the Near and Middle East.
Download or read book Iron Crowned written by Richelle Mead and published by Kensington Publishing Corp.. This book was released on 2011-03-01 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this sexy paranormal thriller, a powerful shaman queen takes the ultimate risk to stop a war that threatens to destroy her Otherworldly kingdom. Back in the mortal realm, shaman-for-hire Eugenie Markham was skilled at banishing beings that didn't belong. But as the Thorn Land's new queen, she's desperately searching for a way to end the war devastating her kingdom. Her only hope is the Iron Crown, a legendary object even the most powerful gentry fear . . . Knowing who to trust is the hardest part. Fairy king Dorian has his own agenda for aiding her search. And Kiyo, her shape-shifter ex-boyfriend, has every reason to betray her along the way. To control the Crown's ever-consuming powers, Eugenie will have to confront an unimaginable temptation—one that will put her soul and the fate of two worlds in mortal peril . . .
Download or read book The Routledge History of Literature in English written by Ronald Carter and published by Psychology Press. This book was released on 2001 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a guide to the main developments in the history of British and Irish literature, charting some of the main features of literary language development and highlighting key language topics.
Download or read book Cities of the Future written by Vladimir Novotny and published by IWA Publishing. This book was released on 2007-09-04 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is developed from and includes the presentations of leading international experts and scholars in the 12-14 July, 2006 Wingspread Workshop. With urban waters as a focal point, this book will explore the links between urban water quality and hydrology, and the broader concepts of green cities and smart growth. It also addresses legal and social barriers to urban ecological sustainability and proposes practical ways to overcome those barriers. Cities of the Future features chapters containing visionary concepts on how to ensure that cities and their water resources become ecologically sustainable and are able to provide clean water for all beneficial uses. The book links North American and Worldwide experience and approaches. The book is primarily a professional reference aimed at a wide interdisciplinary audience, including universities, consultants, environmental advocacy groups and legal environmental professionals.
