Download or read book The Atmospheric Boundary Layer written by J. R. Garratt and published by Cambridge University Press. This book was released on 1994-04-21 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives a comprehensive and lucid account of the science of the atmospheric boundary layer (ABL). There is an emphasis on the application of the ABL to numerical modelling of the climate. The book comprises nine chapters, several appendices (data tables, information sources, physical constants) and an extensive reference list. Chapter 1 serves as an introduction, with chapters 2 and 3 dealing with the development of mean and turbulence equations, and the many scaling laws and theories that are the cornerstone of any serious ABL treatment. Modelling of the ABL is crucially dependent for its realism on the surface boundary conditions, and chapters 4 and 5 deal with aerodynamic and energy considerations, with attention to both dry and wet land surfaces and sea. The structure of the clear-sky, thermally stratified ABL is treated in chapter 6, including the convective and stable cases over homogeneous land, the marine ABL and the internal boundary layer at the coastline. Chapter 7 then extends the discussion to the cloudy ABL. This is seen as particularly relevant, since the extensive stratocumulus regions over the subtropical oceans and stratus regions over the Arctic are now identified as key players in the climate system. Finally, chapters 8 and 9 bring much of the book's material together in a discussion of appropriate ABL and surface parameterization schemes in general circulation models of the atmosphere that are being used for climate simulation.
Download or read book Parameterization Schemes written by David J. Stensrud and published by Cambridge University Press. This book was released on 2007-05-03 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contents: 1.
Download or read book Mountain Weather Research and Forecasting written by Fotini K. Chow and published by Springer Science & Business Media. This book was released on 2012-08-30 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a broad understanding of the fundamental principles driving atmospheric flow over complex terrain and provides historical context for recent developments and future direction for researchers and forecasters. The topics in this book are expanded from those presented at the Mountain Weather Workshop, which took place in Whistler, British Columbia, Canada, August 5-8, 2008. The inspiration for the workshop came from the American Meteorological Society (AMS) Mountain Meteorology Committee and was designed to bridge the gap between the research and forecasting communities by providing a forum for extended discussion and joint education. For academic researchers, this book provides some insight into issues important to the forecasting community. For the forecasting community, this book provides training on fundamentals of atmospheric processes over mountainous regions, which are notoriously difficult to predict. The book also helps to provide a better understanding of current research and forecast challenges, including the latest contributions and advancements to the field. The book begins with an overview of mountain weather and forecasting chal- lenges specific to complex terrain, followed by chapters that focus on diurnal mountain/valley flows that develop under calm conditions and dynamically-driven winds under strong forcing. The focus then shifts to other phenomena specific to mountain regions: Alpine foehn, boundary layer and air quality issues, orographic precipitation processes, and microphysics parameterizations. Having covered the major physical processes, the book shifts to observation and modelling techniques used in mountain regions, including model configuration and parameterizations such as turbulence, and model applications in operational forecasting. The book concludes with a discussion of the current state of research and forecasting in complex terrain, including a vision of how to bridge the gap in the future.
Download or read book Urban Climates written by T. R. Oke and published by Cambridge University Press. This book was released on 2017-09-14 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Urban Climates is the first full synthesis of modern scientific and applied research on urban climates. The book begins with an outline of what constitutes an urban ecosystem. It develops a comprehensive terminology for the subject using scale and surface classification as key constructs. It explains the physical principles governing the creation of distinct urban climates, such as airflow around buildings, the heat island, precipitation modification and air pollution, and it then illustrates how this knowledge can be applied to moderate the undesirable consequences of urban development and help create more sustainable and resilient cities. With urban climate science now a fully-fledged field, this timely book fulfills the need to bring together the disparate parts of climate research on cities into a coherent framework. It is an ideal resource for students and researchers in fields such as climatology, urban hydrology, air quality, environmental engineering and urban design.
Download or read book Numerical Weather and Climate Prediction written by Thomas Tomkins Warner and published by Cambridge University Press. This book was released on 2010-12-02 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides a comprehensive yet accessible treatment of weather and climate prediction, for graduate students, researchers and professionals. It teaches the strengths, weaknesses and best practices for the use of atmospheric models. It is ideal for the many scientists who use such models across a wide variety of applications. The book describes the different numerical methods, data assimilation, ensemble methods, predictability, land-surface modeling, climate modeling and downscaling, computational fluid-dynamics models, experimental designs in model-based research, verification methods, operational prediction, and special applications such as air-quality modeling and flood prediction. This volume will satisfy everyone who needs to know about atmospheric modeling for use in research or operations. It is ideal both as a textbook for a course on weather and climate prediction and as a reference text for researchers and professionals from a range of backgrounds: atmospheric science, meteorology, climatology, environmental science, geography, and geophysical fluid mechanics/dynamics.
Download or read book Wind Energy Meteorology written by Stefan Emeis and published by Springer. This book was released on 2018-03-30 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers an introduction to the meteorological boundary conditions for power generation from wind – both onshore and offshore, and provides meteorological information for the planning and running of this important renewable energy source. It includes the derivation of wind laws and wind-profile descriptions, especially those above the logarithmic surface layer, and discusses winds over complex terrains and nocturnal low-level jets. This updated and expanded second edition features new chapters devoted to the efficiency of large wind parks and their wakes and to offshore wind energy.
Download or read book The Atmosphere and Climate of Mars written by Robert M. Haberle and published by Cambridge University Press. This book was released on 2017-06-29 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume reviews all aspects of Mars atmospheric science from the surface to space, and from now and into the past.
Download or read book Introduction to Micrometeorology written by S. Pal Arya and published by Academic Press. This book was released on 2001-04-26 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: James R. Holton
Download or read book Statistical Mechanics of Turbulent Flows written by Stefan Heinz and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: The simulation of technological and environmental flows is very important for many industrial developments. A major challenge related to their modeling is to involve the characteristic turbulence that appears in most of these flows. The traditional way to tackle this question is to use deterministic equations where the effects of turbulence are directly parametrized, i. e. , assumed as functions of the variables considered. However, this approach often becomes problematic, in particular if reacting flows have to be simulated. In many cases, it turns out that appropriate approximations for the closure of deterministic equations are simply unavailable. The alternative to the traditional way of modeling turbulence is to construct stochastic models which explain the random nature of turbulence. The application of such models is very attractive: one can overcome the closure problems that are inherent to deterministic methods on the basis of relatively simple and physically consistent models. Thus, from a general point of view, the use of stochastic methods for turbulence simulations seems to be the optimal way to solve most of the problems related to industrial flow simulations. However, it turns out that this is not as simple as it looks at first glance. The first question concerns the numerical solution of stochastic equations for flows of environmental and technological interest. To calculate industrial flows, 3 one often has to consider a number of grid cells that is of the order of 100 .
Download or read book Urban Meteorology written by National Research Council and published by National Academies Press. This book was released on 2012-06-13 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: According to the United Nations, three out of five people will be living in cities worldwide by the year 2030. The United States continues to experience urbanization with its vast urban corridors on the east and west coasts. Although urban weather is driven by large synoptic and meso-scale features, weather events unique to the urban environment arise from the characteristics of the typical urban setting, such as large areas covered by buildings of a variety of heights; paved streets and parking areas; means to supply electricity, natural gas, water, and raw materials; and generation of waste heat and materials. Urban Meteorology: Forecasting, Monitoring, and Meeting Users' Needs is based largely on the information provided at a Board on Atmospheric Sciences and Climate community workshop. This book describes the needs for end user communities, focusing in particular on needs that are not being met by current urban-level forecasting and monitoring. Urban Meteorology also describes current and emerging meteorological forecasting and monitoring capabilities that have had and will likely have the most impact on urban areas, some of which are not being utilized by the relevant end user communities. Urban Meteorology explains that users of urban meteorological information need high-quality information available in a wide variety of formats that foster its use and within time constraints set by users' decision processes. By advancing the science and technology related to urban meteorology with input from key end user communities, urban meteorologists can better meet the needs of diverse end users. To continue the advancement within the field of urban meteorology, there are both short-term needs-which might be addressed with small investments but promise large, quick returns-as well as future challenges that could require significant efforts and investments.
Download or read book Wind Resource Assessment written by Michael Brower and published by John Wiley & Sons. This book was released on 2012-06-19 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical, authoritative guide to the assessment of wind resources for utility-scale wind projects authored by a team of experts from a leading renewable energy consultancy The successful development of wind energy projects depends on an accurate assessment of where, how often, and how strongly the wind blows. A mistake in this stage of evaluation can cause severe financial losses and missed opportunities for developers, lenders, and investors. Wind Resource Assessment: A Practical Guide to Developing a Wind Project shows readers how to achieve a high standard of resource assessment, reduce the uncertainty associated with long-term energy performance, and maximize the value of their project assets. Beginning with the siting, installation, and operation of a high-quality wind monitoring program, this book continues with methods of data quality control and validation, extrapolating measurements from anemometer height to turbine height, adjusting short-term observations for historical climate conditions, and wind flow modeling to account for terrain and surface conditions. In addition, Wind Resource Assessment addresses special topics such as: Worker safety Data security Remote sensing technology (sodar and lidar) Offshore resource assessment Impacts of climate change Uncertainty estimation Plant design and energy production estimatio Filled with important information ranging from basic fundamentals of wind to cutting-edge research topics, and accompanied by helpful references and discussion questions, this comprehensive text designed for an international audience is a vital reference that promotes consistent standards for wind assessment across the industry.
Download or read book Mesoscale Meteorological Modeling written by Roger A. Pielke and published by Elsevier. This book was released on 2013-10-22 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: To effectively utilize mesoscale dynamical simulations of the atmosphere, it is necessary to have an understanding the basic physical and mathematical foundations of the models and to have an appreciation of how a particular atmospheric system works. Mesoscale Meteorological Modeling provides such an overview of mesoscale numerical modeling. Starting with fundamental concepts, this text can be used to evaluate the scientific basis of any simulation model that has been or will be developed. Basic material is provided for the beginner as well as more in-depth treatment for the specialist. This text is useful to both the practitioner and the researcher of the mesoscale phenomena.
Download or read book Multi scale Transport and Exchange Processes in the Atmosphere Over Mountains written by Stefano Serafin and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Methods for Fluid Dynamics written by Dale R. Durran and published by Springer Science & Business Media. This book was released on 2010-09-14 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: This scholarly text provides an introduction to the numerical methods used to model partial differential equations, with focus on atmospheric and oceanic flows. The book covers both the essentials of building a numerical model and the more sophisticated techniques that are now available. Finite difference methods, spectral methods, finite element method, flux-corrected methods and TVC schemes are all discussed. Throughout, the author keeps to a middle ground between the theorem-proof formalism of a mathematical text and the highly empirical approach found in some engineering publications. The book establishes a concrete link between theory and practice using an extensive range of test problems to illustrate the theoretically derived properties of various methods. From the reviews: "...the books unquestionable advantage is the clarity and simplicity in presenting virtually all basic ideas and methods of numerical analysis currently actively used in geophysical fluid dynamics." Physics of Atmosphere and Ocean
Download or read book An Introduction to Boundary Layer Meteorology written by Roland B. Stull and published by Springer Science & Business Media. This book was released on 1988-07-31 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of the excitement in boundary-layer meteorology is the challenge associated with turbulent flow - one of the unsolved problems in classical physics. An additional attraction of the filed is the rich diversity of topics and research methods that are collected under the umbrella-term of boundary-layer meteorology. The flavor of the challenges and the excitement associated with the study of the atmospheric boundary layer are captured in this textbook. Fundamental concepts and mathematics are presented prior to their use, physical interpretations of the terms in equations are given, sample data are shown, examples are solved, and exercises are included. The work should also be considered as a major reference and as a review of the literature, since it includes tables of parameterizatlons, procedures, filed experiments, useful constants, and graphs of various phenomena under a variety of conditions. It is assumed that the work will be used at the beginning graduate level for students with an undergraduate background in meteorology, but the author envisions, and has catered for, a heterogeneity in the background and experience of his readers.
Download or read book Topographic Effects in Stratified Flows written by Peter G. Baines and published by Cambridge University Press. This book was released on 1998 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an emphasis on both theory and experiment, this text describes the behaviour of homogeneous and density-stratified fluids over and around topography. In examining the similarities between the flow of a river over a barrier or weir and the flow of the atmosphere over a mountain range, this book presents a comprehensive synthesis of this topic in terms suitable for scientists, engineers, teachers and students of fluid dynamics. With this book, Professor Baines makes a notable contribution to the fields of fluid mechanics and geophysical fluid dynamics. The text will be a great asset to graduate and advanced undergraduate students, as well as to research professionals.
Download or read book Omega 3 Delivery Systems written by Pedro J. García-Moreno and published by Academic Press. This book was released on 2021-07-25 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Omega-3 Delivery Systems: Production, Physical Characterization and Oxidative Stability offers the most recent updates for developing, characterizing, and stabilizing both traditional and novel omega-3 delivery systems, including their final incorporation into food matrices and physicochemical changes during digestion. The book brings chapters on novel omega-3 delivery systems (e.g., high-fat emulsions, Pickering emulsions, electrosprayed capsules, and solid lipid nanoparticles), the application of advanced techniques to evaluate physical and oxidative stabilities (e.g., SAXS, SANS, ESR, and super-resolution fluorescence microscopy), and new developments of food enrichment and physicochemical changes during digestion. The book provides a unique multidisciplinary and multisectoral approach, i.e., featuring authors from industry and academy. Long chain omega-3 polyunsaturated fatty acids (PUFA) present numerous health benefits; however, the consumption of natural products rich in omega-3 PUFA (e.g., fish, krill, and algae) is not enough to reach the daily-recommended values. Therefore, the food industry is highly interested in producing omega-3 fortified foods. - Brings a holistic approach of omega-3 delivery systems, bringing scientific understanding on production, physical characterization, and oxidative stability - Covers key aspects to develop, characterize, and use omega-3 delivery systems for food enrichment, considering physicochemical changes occurring during digestion - Serves as an interface between lipid oxidation and colloids chemistry, encapsulation techniques, soft matter physics, food development, and nutrients bioavailability
