Download or read book MEMS Sensors and Resonators written by Frederic Nabki and published by MDPI. This book was released on 2020-05-27 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectromechanical systems (MEMS) have had a profound impact on a wide range of applications. The degree of miniaturization made possible by MEMS technology has significantly improved the functionalities of many systems, and the performance of MEMS has steadily improved as its uses augment. Notably, MEMS sensors have been prevalent in motion sensing applications for decades, and the sensing mechanisms leveraged by MEMS have been continuously extended to applications spanning the detection of gases, magnetic fields, electromagnetic radiation, and more. In parallel, MEMS resonators have become an emerging field of MEMS and affected subfields such as electronic timing and filtering, and energy harvesting. They have, in addition, enabled a wide range of resonant sensors. For many years now, MEMS have been the basis of various industrial successes, often building on novel academic research. Accordingly, this Special Issue explores many research innovations in MEMS sensors and resonators, from biomedical applications to energy harvesting, gas sensing, resonant sensing, and timing.
Download or read book MEMS Sensors and Resonators written by Frederic Nabki and published by . This book was released on 2020 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectromechanical systems (MEMS) have had a profound impact on a wide range of applications. The degree of miniaturization made possible by MEMS technology has significantly improved the functionalities of many systems, and the performance of MEMS has steadily improved as its uses augment. Notably, MEMS sensors have been prevalent in motion sensing applications for decades, and the sensing mechanisms leveraged by MEMS have been continuously extended to applications spanning the detection of gases, magnetic fields, electromagnetic radiation, and more. In parallel, MEMS resonators have become an emerging field of MEMS and affected subfields such as electronic timing and filtering, and energy harvesting. They have, in addition, enabled a wide range of resonant sensors. For many years now, MEMS have been the basis of various industrial successes, often building on novel academic research. Accordingly, this Special Issue explores many research innovations in MEMS sensors and resonators, from biomedical applications to energy harvesting, gas sensing, resonant sensing, and timing.
Download or read book MEMS written by Vikas Choudhary and published by CRC Press. This book was released on 2017-12-19 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: The microelectromechanical systems (MEMS) industry has experienced explosive growth over the last decade. Applications range from accelerometers and gyroscopes used in automotive safety to high-precision on-chip integrated oscillators for reference generation and mobile phones. MEMS: Fundamental Technology and Applications brings together groundbreaking research in MEMS technology and explores an eclectic set of novel applications enabled by the technology. The book features contributions by top experts from industry and academia from around the world. The contributors explain the theoretical background and supply practical insights on applying the technology. From the historical evolution of nano micro systems to recent trends, they delve into topics including: Thin-film integrated passives as an alternative to discrete passives The possibility of piezoelectric MEMS Solutions for MEMS gyroscopes Advanced interconnect technologies Ambient energy harvesting Bulk acoustic wave resonators Ultrasonic receiver arrays using MEMS sensors Optical MEMS-based spectrometers The integration of MEMS resonators with conventional circuitry A wearable inertial and magnetic MEMS sensor assembly to estimate rigid body movement patterns Wireless microactuators to enable implantable MEMS devices for drug delivery MEMS technologies for tactile sensing and actuation in robotics MEMS-based micro hot-plate devices Inertial measurement units with integrated wireless circuitry to enable convenient, continuous monitoring Sensors using passive acousto-electric devices in wired and wireless systems Throughout, the contributors identify challenges and pose questions that need to be resolved, paving the way for new applications. Offering a wide view of the MEMS landscape, this is an invaluable resource for anyone working to develop and commercialize MEMS applications.
Download or read book Piezoelectric MEMS Resonators written by Harmeet Bhugra and published by Springer. This book was released on 2017-01-09 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces piezoelectric microelectromechanical (pMEMS) resonators to a broad audience by reviewing design techniques including use of finite element modeling, testing and qualification of resonators, and fabrication and large scale manufacturing techniques to help inspire future research and entrepreneurial activities in pMEMS. The authors discuss the most exciting developments in the area of materials and devices for the making of piezoelectric MEMS resonators, and offer direct examples of the technical challenges that need to be overcome in order to commercialize these types of devices. Some of the topics covered include: Widely-used piezoelectric materials, as well as materials in which there is emerging interest Principle of operation and design approaches for the making of flexural, contour-mode, thickness-mode, and shear-mode piezoelectric resonators, and examples of practical implementation of these devices Large scale manufacturing approaches, with a focus on the practical aspects associated with testing and qualification Examples of commercialization paths for piezoelectric MEMS resonators in the timing and the filter markets ...and more! The authors present industry and academic perspectives, making this book ideal for engineers, graduate students, and researchers.
Download or read book Resonant MEMS written by Oliver Brand and published by John Wiley & Sons. This book was released on 2015-04-28 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of the AMN book series, this book covers the principles, modeling and implementation as well as applications of resonant MEMS from a unified viewpoint. It starts out with the fundamental equations and phenomena that govern the behavior of resonant MEMS and then gives a detailed overview of their implementation in capacitive, piezoelectric, thermal and organic devices, complemented by chapters addressing the packaging of the devices and their stability. The last part of the book is devoted to the cutting-edge applications of resonant MEMS such as inertial, chemical and biosensors, fluid properties sensors, timing devices and energy harvesting systems.
Download or read book MEMS Resonator Filters written by Rajendra M. Patrikar and published by Institution of Engineering and Technology. This book was released on 2020-06-15 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of MEMS resonators for signal processing is relatively new and has the potential to change the topology of newer generation circuits. New materials, design and fabrication processes, and integration with conventional circuitry will need to be considered. This book explores the challenges and opportunities of developing circuits with MEMS resonator filters. The replacement of classical electrical components with electromechanical components is explored in this book, and the specific properties of MEMS resonators required in various frequency ranges are discussed. Materials and their selection, CAD tools for system design and the integration of MEMS with CMOS circuitry, and the design, fabrication, testing and packaging of MEMS filters themselves are addressed in detail. Case studies where resonator MEMS have been used as components have been included to encourage readers to consider the practical applications of this technology. MEMS Resonator Filters is essential reading for the analogue circuit designer community, particularly those who are designing circuits for wireless communications, and CMOS technology researchers and engineers who are involved in the fabrication of circuits. Designers of sensors and interfacing circuits will also be interested since resonators are also being used as sensors.
Download or read book Mems Packaging written by Lee Yung-cheng and published by World Scientific. This book was released on 2018-01-03 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMS sensors and actuators are enabling components for smartphones, AR/VR, and wearable electronics. MEMS packaging is recognized as one of the most critical activities to design and manufacture reliable MEMS. A unique challenge to MEMS packaging is how to protect moving MEMS devices during manufacturing and operation. With the introduction of wafer level capping and encapsulation processes, this barrier is removed successfully. In addition, MEMS devices should be integrated with their electronic chips with the smallest footprint possible. As a result, 3D packaging is applied to connect the devices vertically for the most effective integration. Such 3D packaging also paves the way for further heterogenous integration of MEMS devices, electronics, and other functional devices. This book consists of chapters written by leaders developing products in a MEMS industrial setting and faculty members conducting research in an academic setting. After an introduction chapter, the practical issues are covered: through-silicon vias (TSVs), vertical interconnects, wafer level packaging, motion sensor-to-CMOS bonding, and use of printed circuit board technology to fabricate MEMS. These chapters are written by leaders developing MEMS products. Then, fundamental issues are discussed, topics including encapsulation of MEMS, heterogenous integration, microfluidics, solder bonding, localized sealing, microsprings, and reliability. Contents: Introduction to MEMS Packaging (Y C Lee, Ramesh Ramadoss and Nils Hoivik)Silex's TSV Technology: Overview of Processes and MEMS Applications (Tomas Bauer and Thorbjörn Ebefors)Vertical Interconnects for High-end MEMS (Maaike M Visser Taklo and Sigurd Moe)Using Wafer-Level Packaging to Improve Sensor Manufacturability and Cost (Paul Pickering, Collin Twanow and Dean Spicer)Nasiri Fabrication Process for Low-Cost Motion Sensors in the Consumer Market (Steven Nasiri, Ramesh Ramadoss and Sandra Winkler)PCB Based MEMS and Microfluidics (Ramesh Ramadoss, Antonio Luque and Carmen Aracil)Single Wafer Encapsulation of MEMS Resonators (Janna Rodriguez and Thomas Kenny)Heterogeneous Integration and Wafer-Level Packaging of MEMS (Masayoshi Esashi and Shuji Tanaka)Packaging of Membrane-Based Polymer Microfluidic Systems (Yu-Chuan Su)Wafer-Level Solder Bonding by Using Localized Induction Heating (Hsueh-An Yang, Chiung-Wen Lin and Weileun Fang)Localized Sealing Schemes for MEMS Packaging (Y T Cheng, Y C Su and Liwei Lin)Microsprings for High-Density Flip-Chip Packaging (Eugene M Chow and Christopher L Chua)MEMS Reliability (Chien-Ming Huang, Arvind Sai SarathiVasan, Yunhan Huang, Ravi Doraiswami, Michael Osterman and Michael Pecht) Readership: Researchers and graduate students participating in research, R&D, and manufacturing of MEMS products; professionals associated with the integration for systems represented by smartphones, AR/VR, and wearable electronics. Keywords: MEMS;Packaging;Microelectromechanical Systems;Reliability;Microstructures;Sensors;ActuatorsReview: Key Features: The book covers engineering topics critical to product development as well as research topics critical to integration for future MEMS-enabled systemsIt is a major resource for those participating in MEMS and for every professional associated with the integration for systems represented by smartphones, AR/VR and wearable electronics
Download or read book MEMS Silicon Oscillating Accelerometers and Readout Circuits written by Xu, Yong Ping and published by River Publishers. This book was released on 2019-02-12 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most MEMS accelerometers on the market today are capacitive accelerometers that are based on the displacement sensing mechanism. This book is intended to cover recent developments of MEMS silicon oscillating accelerometers (SOA), also referred to as MEMS resonant accelerometer. As contrast to the capacitive accelerometer, the MEMS SOA is based on the force sensing mechanism, where the input acceleration is converted to a frequency output. MEMS Silicon Oscillating Accelerometers and Readout Circuits consists of six chapters and covers both MEMS sensor and readout circuit, and provides an in-depth coverage on the design and modelling of the MEMS SOA with several recently reported prototypes. The book is not only useful to researchers and engineers who are familiar with the topic, but also appeals to those who have general interests in MEMS inertial sensors. The book includes extensive references that provide further information on this topic.
Download or read book Acoustic Wave and Electromechanical Resonators written by Humberto Campanella and published by Artech House. This book was released on 2010 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This groundbreaking book provides you with a comprehensive understanding of FBAR (thin-film bulk acoustic wave resonator), MEMS (microelectomechanical system), and NEMS (nanoelectromechanical system) resonators. For the first time anywhere, you find extensive coverage of these devices at both the technology and application levels. This practical reference offers you guidance in design, fabrication, and characterization of FBARs, MEMS and NEBS. It discusses the integration of these devices with standard CMOS (complementary-metal-oxide-semiconductor) technologies, and their application to sensing and RF systems. Moreover, this one-stop resource looks at the main characteristics, differences, and limitations of FBAR, MEMS, and NEMS devices, helping you to choose the right approaches for your projects. Over 280 illustrations and more than 130 equations support key topics throughout the book.
Download or read book MEMS Accelerometers written by Mahmoud Rasras and published by MDPI. This book was released on 2019-05-27 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-electro-mechanical system (MEMS) devices are widely used for inertia, pressure, and ultrasound sensing applications. Research on integrated MEMS technology has undergone extensive development driven by the requirements of a compact footprint, low cost, and increased functionality. Accelerometers are among the most widely used sensors implemented in MEMS technology. MEMS accelerometers are showing a growing presence in almost all industries ranging from automotive to medical. A traditional MEMS accelerometer employs a proof mass suspended to springs, which displaces in response to an external acceleration. A single proof mass can be used for one- or multi-axis sensing. A variety of transduction mechanisms have been used to detect the displacement. They include capacitive, piezoelectric, thermal, tunneling, and optical mechanisms. Capacitive accelerometers are widely used due to their DC measurement interface, thermal stability, reliability, and low cost. However, they are sensitive to electromagnetic field interferences and have poor performance for high-end applications (e.g., precise attitude control for the satellite). Over the past three decades, steady progress has been made in the area of optical accelerometers for high-performance and high-sensitivity applications but several challenges are still to be tackled by researchers and engineers to fully realize opto-mechanical accelerometers, such as chip-scale integration, scaling, low bandwidth, etc. This Special Issue on "MEMS Accelerometers" seeks to highlight research papers, short communications, and review articles that focus on: Novel designs, fabrication platforms, characterization, optimization, and modeling of MEMS accelerometers. Alternative transduction techniques with special emphasis on opto-mechanical sensing. Novel applications employing MEMS accelerometers for consumer electronics, industries, medicine, entertainment, navigation, etc. Multi-physics design tools and methodologies, including MEMS-electronics co-design. Novel accelerometer technologies and 9DoF IMU integration. Multi-accelerometer platforms and their data fusion.
Download or read book 3D and Circuit Integration of MEMS written by Masayoshi Esashi and published by John Wiley & Sons. This book was released on 2021-07-19 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D and Circuit Integration of MEMS Explore heterogeneous circuit integration and the packaging needed for practical applications of microsystems MEMS and system integration are important building blocks for the “More-Than-Moore” paradigm described in the International Technology Roadmap for Semiconductors. And, in 3D and Circuit Integration of MEMS, distinguished editor Dr. Masayoshi Esashi delivers a comprehensive and systematic exploration of the technologies for microsystem packaging and heterogeneous integration. The book focuses on the silicon MEMS that have been used extensively and the technologies surrounding system integration. You’ll learn about topics as varied as bulk micromachining, surface micromachining, CMOS-MEMS, wafer interconnection, wafer bonding, and sealing. Highly relevant for researchers involved in microsystem technologies, the book is also ideal for anyone working in the microsystems industry. It demonstrates the key technologies that will assist researchers and professionals deal with current and future application bottlenecks. Readers will also benefit from the inclusion of: A thorough introduction to enhanced bulk micromachining on MIS process, including pressure sensor fabrication and the extension of MIS process for various advanced MEMS devices An exploration of epitaxial poly Si surface micromachining, including process condition of epi-poly Si, and MEMS devices using epi-poly Si Practical discussions of Poly SiGe surface micromachining, including SiGe deposition and LP CVD polycrystalline SiGe A concise treatment of heterogeneously integrated aluminum nitride MEMS resonators and filters Perfect for materials scientists, electronics engineers, and electrical and mechanical engineers, 3D and Circuit Integration of MEMS will also earn a place in the libraries of semiconductor physicists seeking a one-stop reference for circuit integration and the practical application of microsystems.
Download or read book MEMS Linear and Nonlinear Statics and Dynamics written by Mohammad I. Younis and published by Springer Science & Business Media. This book was released on 2011-06-27 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMS Linear and Nonlinear Statics and Dynamics presents the necessary analytical and computational tools for MEMS designers to model and simulate most known MEMS devices, structures, and phenomena. This book also provides an in-depth analysis and treatment of the most common static and dynamic phenomena in MEMS that are encountered by engineers. Coverage also includes nonlinear modeling approaches to modeling various MEMS phenomena of a nonlinear nature, such as those due to electrostatic forces, squeeze-film damping, and large deflection of structures. The book also: Includes examples of numerous MEMS devices and structures that require static or dynamic modeling Provides code for programs in Matlab, Mathematica, and ANSYS for simulating the behavior of MEMS structures Provides real world problems related to the dynamics of MEMS such as dynamics of electrostatically actuated devices, stiction and adhesion of microbeams due to electrostatic and capillary forces MEMS Linear and Nonlinear Statics and Dynamics is an ideal volume for researchers and engineers working in MEMS design and fabrication.
Download or read book Liquid phase Operation of Mems Resonators for Biochemical Sensing in Point of Care and Embedded Applications written by Luke Armitage Beardslee and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this work is the development of MEMS-based resonant sensors for liquid-phase biochemical sensing applications. Specifically, the sensors developed here are aimed at embedded or point-of-sampling applications: (1) when there is not enough time to send a sample to a lab for analysis, (2) in resource-poor settings, (3) when collecting analyte and shipping it to a lab would damage the sample, or (4) for in-situ monitoring. To this end, a bulk micromachined resonant cantilever sensor and a surface micromachined sensor based on the spring-softening effect are investigated as transducer elements. The developed cantilever resonators are operated in an in-plane vibration mode to reduce fluid damping and mass loading by the surrounding fluid. The surface of the resonator is either coated with a chemically sensitive polymer film for chemical sensing or with a layer of protein or antibody for biosensor testing. Chemical tests for sensing volatile organic compounds using polymer-coated in-plane resonators in the liquid-phase give estimated limits of detection below 100 ppb. In addition, biosensor tests for the detection of anti-IgG yield estimated limits of detection around 100 ng/ml. In an attempt to further improve sensor reliability and to further lower the limits of detection, a second sensing concept has been investigated. The presented sensing scheme is capacitive with a resonator acting as an analog-to-digital converter. The resonator and the sensing capacitors are coupled via the spring softening effect. Through this mechanism a change in capacitance causes a shift in resonant frequency. Extensive device modeling has been performed and a process has been developed allowing for fabrication and on-chip packaging of these sensor structures. Initial mechanical characterization data show that the resonators do in fact vibrate.
Download or read book CMOS MEMS written by Henry Baltes and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructures, electronics, nanotechnology - these vast fields of research are growing together as the size gap narrows and many different materials are combined. Current research, engineering sucesses and newly commercialized products hint at the immense innovative potentials and future applications that open up once mankind controls shape and function from the atomic level right up to the visible world without any gaps. Sensor systems, microreactors, nanostructures, nanomachines, functional surfaces, integrated optics, displays, communications technology, biochips, human/machine interfaces, prosthetics, miniaturized medical and surgery equipment and many more opportunities are being explored. This new series, Advanced Micro and Nano Systems, provides cutting-edge reviews from top authors on technologies, devices and advanced systems from the micro and nano worlds.
Download or read book MEMS Sensors written by Siva Yellampalli and published by BoD – Books on Demand. This book was released on 2018-07-18 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMS by becoming a part of various applications ranging from smartphones to automobiles has become an integral part of our everyday life. MEMS is building synergy between previously unrelated fields such as biology, microelectronics and communications, to improve the quality of human life. The sensors in MEMS gather information from the surrounding, which is then processed by the electronics for decision-making to control the environment. MEMS offers opportunities to miniaturize devices, integrate them with electronics and realize cost savings through batch fabrication. MEMS technology has enhanced many important applications in domains such as consumer electronics, biotechnology and communication and it holds great promise for continued contributions in the future. This book focuses on understanding the design, development and various applications of MEMS sensors.
Download or read book Handbook of Force Transducers written by Dan Mihai Stefanescu and published by Springer Science & Business Media. This book was released on 2011-03-16 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part I introduces the basic "Principles and Methods of Force Measurement" according to a classification into a dozen of force transducers types: resistive, inductive, capacitive, piezoelectric, electromagnetic, electrodynamic, magnetoelastic, galvanomagnetic (Hall-effect), vibrating wires, (micro)resonators, acoustic and gyroscopic. Two special chapters refer to force balance techniques and to combined methods in force measurement. Part II discusses the "(Strain Gauge) Force Transducers Components", evolving from the classical force transducer to the digital / intelligent one, with the incorporation of three subsystems (sensors, electromechanics and informatics). The elastic element (EE) is the "heart" of the force transducer and basically determines its performance. A 12-type elastic element classification is proposed (stretched / compressed column or tube, bending beam, bending and/or torsion shaft, middle bent bar with fixed ends, shear beam, bending ring, yoke or frame, diaphragm, axial-stressed torus, axisymmetrical and voluminous EE), with emphasis on the optimum location of the strain gauges. The main properties of the associated Wheatstone bridge, best suited for the parametrical transducers, are examined, together with the appropriate electronic circuits for SGFTs. The handbook fills a gap in the field of Force Measurement, both experts and newcomers, no matter of their particular interest, finding a lot of useful and valuable subjects in the area of Force Transducers; in fact, it is the first specialized monograph in this inter- and multidisciplinary field.
Download or read book MEMS based Circuits and Systems for Wireless Communication written by Christian C Enz and published by Springer Science & Business Media. This book was released on 2012-08-21 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMS-based Circuits and Systems for Wireless Communications provides comprehensive coverage of RF-MEMS technology from device to system level. This edited volume places emphasis on how system performance for radio frequency applications can be leveraged by Micro-Electro-Mechanical Systems (MEMS). Coverage also extends to innovative MEMS-aware radio architectures that push the potential of MEMS technology further ahead. This work presents a broad overview of the technology from MEMS devices (mainly BAW and Si MEMS resonators) to basic circuits, such as oscillators and filters, and finally complete systems such as ultra-low-power MEMS-based radios. Contributions from leading experts around the world are organized in three parts. Part I introduces RF-MEMS technology, devices and modeling and includes a prospective outlook on ongoing developments towards Nano-Electro-Mechanical Systems (NEMS) and phononic crystals. Device properties and models are presented in a circuit oriented perspective. Part II focusses on design of electronic circuits incorporating MEMS. Circuit design techniques specific to MEMS resonators are applied to oscillators and active filters. In Part III contributors discuss how MEMS can advantageously be used in radios to increase their miniaturization and reduce their power consumption. RF systems built around MEMS components such as MEMS-based frequency synthesis including all-digital PLLs, ultra-low power MEMS-based communication systems and a MEMS-based automotive wireless sensor node are described.