Download or read book Memory Controllers for Real Time Embedded Systems written by Benny Akesson and published by Springer Science & Business Media. This book was released on 2011-09-15 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: Verification of real-time requirements in systems-on-chip becomes more complex as more applications are integrated. Predictable and composable systems can manage the increasing complexity using formal verification and simulation. This book explains the concepts of predictability and composability and shows how to apply them to the design and analysis of a memory controller, which is a key component in any real-time system.
Download or read book Memory Controllers for Mixed Time Criticality Systems written by Sven Goossens and published by Springer. This book was released on 2016-04-11 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the design and performance analysis of SDRAM controllers that cater to both real-time and best-effort applications, i.e. mixed-time-criticality memory controllers. The authors describe the state of the art, and then focus on an architecture template for reconfigurable memory controllers that addresses effectively the quickly evolving set of SDRAM standards, in terms of worst-case timing and power analysis, as well as implementation. A prototype implementation of the controller in SystemC and synthesizable VHDL for an FPGA development board are used as a proof of concept of the architecture template.
Download or read book Memory Architecture Exploration for Programmable Embedded Systems written by Peter Grun and published by Springer Science & Business Media. This book was released on 2003 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a "compiler-in-the-loop" exploration strategy for alternative memory architectures, allowing for effective matching of the target application to the processor-memory architecture. This new approach for memory architecture exploration replaces the traditional black-box view of the memory system. The utility of the approach is illustrated for a set of large, real-life benchmarks. Material is of interest to different groups in the embedded systems-on-chip field, including researchers and students in memory architecture, CAD developers, and system designers. Grun is affiliated with the Center for Embedded Computer Systems, University of California-Irvine. Annotation (c)2003 Book News, Inc., Portland, OR (booknews.com).
Download or read book Real Time Concepts for Embedded Systems written by Qing Li and published by CRC Press. This book was released on 2003-01-04 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: '... a very good balance between the theory and practice of real-time embedded system designs.' —Jun-ichiro itojun Hagino, Ph.D., Research Laboratory, Internet Initiative Japan Inc., IETF IPv6 Operations Working Group (v6ops) co-chair 'A cl
Download or read book Embedded Microprocessor Systems written by Stuart Ball and published by Elsevier. This book was released on 2002-12-04 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The less-experienced engineer will be able to apply Ball's advice to everyday projects and challenges immediately with amazing results. In this new edition, the author has expanded the section on debug to include avoiding common hardware, software and interrupt problems. Other new features include an expanded section on system integration and debug to address the capabilities of more recent emulators and debuggers, a section about combination microcontroller/PLD devices, and expanded information on industry standard embedded platforms. Covers all 'species' of embedded system chips rather than specific hardware Learn how to cope with 'real world' problems Design embedded systems products that are reliable and work in real applications
Download or read book Distributed Embedded Control Systems written by Matjaž Colnaric and published by Springer Science & Business Media. This book was released on 2007-11-21 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fascinating new work comes complete with more than 100 illustrations and a detailed practical prototype. It explores the domains encountered when designing a distributed embedded computer control system as an integrated whole. Basic issues about real-time systems and their properties, especially safety, are examined first. Then, system and hardware architectures are dealt with, along with programming issues, embodying desired properties, basic language subsets, object orientation and language support for hardware and software specifications.
Download or read book Real Time Embedded Systems written by Jiacun Wang and published by John Wiley & Sons. This book was released on 2017-07-10 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering comprehensive coverage of the convergence of real-time embedded systems scheduling, resource access control, software design and development, and high-level system modeling, analysis and verification Following an introductory overview, Dr. Wang delves into the specifics of hardware components, including processors, memory, I/O devices and architectures, communication structures, peripherals, and characteristics of real-time operating systems. Later chapters are dedicated to real-time task scheduling algorithms and resource access control policies, as well as priority-inversion control and deadlock avoidance. Concurrent system programming and POSIX programming for real-time systems are covered, as are finite state machines and Time Petri nets. Of special interest to software engineers will be the chapter devoted to model checking, in which the author discusses temporal logic and the NuSMV model checking tool, as well as a chapter treating real-time software design with UML. The final portion of the book explores practical issues of software reliability, aging, rejuvenation, security, safety, and power management. In addition, the book: Explains real-time embedded software modeling and design with finite state machines, Petri nets, and UML, and real-time constraints verification with the model checking tool, NuSMV Features real-world examples in finite state machines, model checking, real-time system design with UML, and more Covers embedded computer programing, designing for reliability, and designing for safety Explains how to make engineering trade-offs of power use and performance Investigates practical issues concerning software reliability, aging, rejuvenation, security, and power management Real-Time Embedded Systems is a valuable resource for those responsible for real-time and embedded software design, development, and management. It is also an excellent textbook for graduate courses in computer engineering, computer science, information technology, and software engineering on embedded and real-time software systems, and for undergraduate computer and software engineering courses.
Download or read book Real time Operating System Services for Networked Embedded Systems written by Khawar M. Zuberi and published by . This book was released on 1998 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Memory Allocation Problems in Embedded Systems written by Maria Soto and published by John Wiley & Sons. This book was released on 2013-01-24 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded systems are everywhere in contemporary life and are supposed to make our lives more comfortable. In industry, embedded systems are used to manage and control complex systems (e.g. nuclear power plants, telecommunications and flight control) and they are also taking an important place in our daily activities (e.g. smartphones, security alarms and traffic lights). In the design of embedded systems, memory allocation and data assignment are among the main challenges that electronic designers have to face. In fact, they impact heavily on the main cost metrics (power consumption, performance and area) in electronic devices. Thus designers of embedded systems have to pay careful attention in order to minimize memory requirements, thus improving memory throughput and limiting the power consumption by the system’s memory. Electronic designers attempt to minimize memory requirements with the aim of lowering the overall system costs. A state of the art of optimization techniques for memory management and data assignment is presented in this book.
Download or read book Dynamic Memory Management for Embedded Systems written by David Atienza Alonso and published by Springer. This book was released on 2014-09-19 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and unified methodology, including basic principles and reusable processes, for dynamic memory management (DMM) in embedded systems. The authors describe in detail how to design and optimize the use of dynamic memory in modern, multimedia and network applications, targeting the latest generation of portable embedded systems, such as smartphones. Coverage includes a variety of design and optimization topics in electronic design automation of DMM, from high-level software optimization to microarchitecture-level hardware support. The authors describe the design of multi-layer dynamic data structures for the final memory hierarchy layers of the target portable embedded systems and how to create a low-fragmentation, cost-efficient, dynamic memory management subsystem out of configurable components for the particular memory allocation and de-allocation patterns for each type of application. The design methodology described in this book is based on propagating constraints among design decisions from multiple abstraction levels (both hardware and software) and customizing DMM according to application-specific data access and storage behaviors.
Download or read book Distributed Embedded and Real time Java Systems written by M. Teresa Higuera-Toledano and published by Springer Science & Business Media. This book was released on 2012-02-07 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on real-time Java technology has been prolific over the past decade, leading to a large number of corresponding hardware and software solutions, and frameworks for distributed and embedded real-time Java systems. This book is aimed primarily at researchers in real-time embedded systems, particularly those who wish to understand the current state of the art in using Java in this domain. Much of the work in real-time distributed, embedded and real-time Java has focused on the Real-time Specification for Java (RTSJ) as the underlying base technology, and consequently many of the Chapters in this book address issues with, or solve problems using, this framework. Describes innovative techniques in: scheduling, memory management, quality of service and communication systems supporting real-time Java applications; Includes coverage of multiprocessor embedded systems and parallel programming; Discusses state-of-the-art resource management for embedded systems, including Java’s real-time garbage collection and parallel collectors; Considers hardware support for the execution of Java programs including how programs can interact with functional accelerators; Includes coverage of Safety Critical Java for development of safety critical embedded systems.
Download or read book Reconfigurable Embedded Control Systems Applications for Flexibility and Agility written by Khalgui, Mohamed and published by IGI Global. This book was released on 2010-11-30 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book addresses the development of reconfigurable embedded control systems and describes various problems in this important research area, which include static and dynamic (manual or automatic) reconfigurations, multi-agent architectures, modeling and verification, component-based approaches, architecture description languages, distributed reconfigurable architectures, real-time and low power scheduling, execution models, and the implementation of such systems"--
Download or read book Embedded System Design with ARM Cortex M Microcontrollers written by Cem Ünsalan and published by Springer Nature. This book was released on 2022-01-03 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook introduces basic and advanced embedded system topics through Arm Cortex M microcontrollers, covering programmable microcontroller usage starting from basic to advanced concepts using the STMicroelectronics Discovery development board. Designed for use in upper-level undergraduate and graduate courses on microcontrollers, microprocessor systems, and embedded systems, the book explores fundamental and advanced topics, real-time operating systems via FreeRTOS and Mbed OS, and then offers a solid grounding in digital signal processing, digital control, and digital image processing concepts — with emphasis placed on the usage of a microcontroller for these advanced topics. The book uses C language, “the” programming language for microcontrollers, C++ language, and MicroPython, which allows Python language usage on a microcontroller. Sample codes and course slides are available for readers and instructors, and a solutions manual is available to instructors. The book will also be an ideal reference for practicing engineers and electronics hobbyists who wish to become familiar with basic and advanced microcontroller concepts.
Download or read book Embedded Media Processing written by David J. Katz and published by Elsevier. This book was released on 2005-10-18 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: A key technology enabling fast-paced embedded media processing developments is the high-performance, low-power, small-footprint convergent processor, a specialized device that combines the real-time control of a traditional microcontroller with the signal processing power of a DSP. This practical guide is your one-stop shop for understanding how to implement this cutting-edge technology.You will learn how to: Choose the proper processor for an application. Architect your system to avoid problems at the outset. Manage your data flows and memory accesses so that they line up properly Make smart-trade-offs in portable applications between power considerations and computational performance. Divide processing tasks across multiple cores. Program frameworks that optimize performance without needlessly increasing programming model complexity. Implement benchmarking techniques that will help you adapt a framework to best fit a target application, and much more! Covering the entire spectrum of EMP-related design issues, from easy-to-understand explanations of basic architecture and direct memory access (DMA), to in-depth discussions of code optimization and power management, this practical book will be an invaluable aid to every engineer working with EMP, from the beginner to the seasoned expert. Comprehensive subject coverage with emphasis on practical application Essential assembly language code included throughout text Many real-world examples using Analog's popular Blackfin Processor architecture
Download or read book Handbook of Networked and Embedded Control Systems written by Dimitrios Hristu-Varsakelis and published by Springer Science & Business Media. This book was released on 2007-11-14 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vast majority of control systems built today are embedded; that is, they rely on built-in, special-purpose digital computers to close their feedback loops. Embedded systems are common in aircraft, factories, chemical processing plants, and even in cars–a single high-end automobile may contain over eighty different computers. The design of embedded controllers and of the intricate, automated communication networks that support them raises many new questions—practical, as well as theoretical—about network protocols, compatibility of operating systems, and ways to maximize the effectiveness of the embedded hardware. This handbook, the first of its kind, provides engineers, computer scientists, mathematicians, and students a broad, comprehensive source of information and technology to address many questions and aspects of embedded and networked control. Separated into six main sections—Fundamentals, Hardware, Software, Theory, Networking, and Applications—this work unifies into a single reference many scattered articles, websites, and specification sheets. Also included are case studies, experiments, and examples that give a multifaceted view of the subject, encompassing computation and communication considerations.
Download or read book Embedded and Real Time Operating Systems written by K. C. Wang and published by Springer Nature. This book was released on 2023-09-14 with total page 861 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the basic concepts and principles of operating systems, showing how to apply them to the design and implementation of complete operating systems for embedded and real-time systems. It includes all the foundational and background information on ARM architecture, ARM instructions and programming, toolchain for developing programs, virtual machines for software implementation and testing, program execution image, function call conventions, run-time stack usage and link C programs with assembly code. Embedded and Real-Time Operating Systems describes the design and implementation of a complete OS for embedded systems in incremental steps, explaining the design principles and implementation techniques. For Symmetric Multiprocessing (SMP) embedded systems, the author examines the ARM MPcore processors, which include the SCU and GIC for interrupts routing and interprocessor communication and synchronization by Software Generated Interrupts (SGIs). This Second Edition covers ARM64 architecture and programming. These include exception levels, vector tables and exceptions handling, GICv3 programming and interrupt processing. It covers virtual to physical address mappings in ARMv8, and shows a 64-bit OS with kernel space in EL1 and separate user spaces in EL0. It also covers ARM TrustZone technology and secure systems. These include hardware and software architectures for secure and normal worlds, interactions and switching between the two worlds. It shows a secure world comprising a secure monitor in EL3 to provide service functions, and a normal world comprising processes in non-secure EL1, which use SMC to access service functions in the secure world. Throughout the book, complete working sample systems demonstrate the design principles and implementation techniques. The content is suitable for advanced-level and graduate students working in software engineering, programming, and systems theory.
Download or read book Embedded Control System Design written by Alexandru Forrai and published by Springer Science & Business Media. This book was released on 2012-07-27 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control system design is a challenging task for practicing engineers. It requires knowledge of different engineering fields, a good understanding of technical specifications and good communication skills. The current book introduces the reader into practical control system design, bridging the gap between theory and practice. The control design techniques presented in the book are all model based., considering the needs and possibilities of practicing engineers. Classical control design techniques are reviewed and methods are presented how to verify the robustness of the design. It is how the designed control algorithm can be implemented in real-time and tested, fulfilling different safety requirements. Good design practices and the systematic software development process are emphasized in the book according to the generic standard IEC61508. The book is mainly addressed to practicing control and embedded software engineers - working in research and development – as well as graduate students who are faced with the challenge to design control systems and implement them in real-time.
