Download or read book Chemical Mechanical Planarization of Semiconductor Materials written by M.R. Oliver and published by Springer Science & Business Media. This book was released on 2004-01-26 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a comprehensive review of CMP (Chemical-Mechanical Planarization) technology, one of the most exciting areas in the field of semiconductor technology. It contains detailed discussions of all aspects of the technology, for both dielectrics and metals. The state of polishing models and their relation to experimental results are covered. Polishing tools and consumables are also covered. The leading edge issues of damascene and new dielectrics as well as slurryless technology are discussed.

Download or read book Treatment of Micropollutants in Water and Wastewater written by Jurate Virkutyte and published by IWA Publishing. This book was released on 2010-08-14 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last few years there has been a growing concern over the increasing concentration of micropollutants originating from a great variety of sources including pharmaceutical, chemical engineering and personal care product industries in rivers, lakes, soil and groundwater. As most of the micropollutants are polar and persistent compounds, they are only partially or not at all removed from wastewater and thus can enter the environment posing a great risk to the biota. It is hypothesized that wastewater is one of the most important point sources for micropollutants. Treatment of Micropollutants in Water and Wastewater gives a comprehensive overview of modern analytical methods and will summarize novel single and hybrid methods to remove continuously emerging contaminants - micropollutants from the aqueous phase. New trends (e.g. sensor technology, nanotechnology and hybrid treatment technologies) are described in detail. The book is very timely because the new techniques are still in the development phase and have to be realized not only in the laboratory but also on a larger scale. The content of the book is divided into chapters that present current descriptive and analytical methods that are available to detect and measure micropollutants together with detailed information on various chemical, biological and physicochemical methods that have evolved over the last few decades. Treatment of Micropollutants in Water and Wastewater will also enable readers to make well informed choices through providing an understanding of why and how micropollutants must be removed from water sources, and what are the most appropriate and available techniques for providing a cost and technologically effective and sustainable solutions for reaching the goal of micropollutant-free water and wastewater. The book will be suitable for water and wastewater professionals as well for students and researchers in civil engineering, environmental engineering and process engineering fields.

Download or read book Sol Gel Technologies for Glass Producers and Users written by Michel Andre Aegerter and published by Springer Science & Business Media. This book was released on 2013-03-19 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-Gel Techniques for Glass Producers and Users provides technological information, descriptions and characterizations of prototypes, or products already on the market, and illustrates advantages and disadvantages of the sol-gel process in comparison to other methods. The first chapter entitled "Wet Chemical Technology" gives a summary of the basic principles of the sol-gel chemistry. The most promising applications are related to coatings. Chapter 2 describes the various "Wet Chemical Coating Technologies" from glass cleaning to many deposition and post-coating treatment techniques. These include patterning of coatings through direct or indirect techniques which have became very important and for which the sol-gel processing is particularly well adapted. Chapter 3 entitled "Bulk Glass Technologies" reports on the preparation of special glasses for different applications. Chapter 4 entitled "Coatings and Materials Properties" describes the properties of the different coatings and the sol-gel materials, fibers and powders. The chapter also includes a section dedicated to the characterization techniques especially applied to sol-gel coatings and products.

Download or read book Metallurgical and Ceramic Protective Coatings written by K.H. Stern and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering is an increasingly important field and consequently those involved need to be aware of the vast range of technologies available to modify surfaces. This text provides an up-to-date, authoritative exposition of the major condensed phase methods used for producing metallurgical and ceramic coatings. Each method is discussed thoroughly by an expert in that field. In each chapter the principle of the method, its range of applications and technical aspects involved are described. The book not only informs the reader about established technologies familiar only to specialists, but also details activity on the frontier of coating technology providing an insight into those potential technologies not yet fully developed but which should emerge in the near future.

Download or read book Stone Conservation written by Clifford A. Price and published by Getty Publications. This book was released on 2011-02-15 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1996, this volume has been substantially updated to reflect new research in the conservation of stone monuments, sculpture, and archaeological sites.

Download or read book Large Dams written by Anthony H. J. Dorcey and published by World Bank Publications. This book was released on 1997-01-01 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1996 the World Bank Operations Evaluation Department completed an internal review of 50 large dams funded by the World Bank. IUCN-The World Conservation Union and the World Bank agreed to jointly host a workshop in April 1997 to discuss the findings of the review and their implications for a more in-depth study. The workshop broke new ground by bringing together representatives from governments, the private sector, international financial institutions and civil society organizations to address three issues: critical advances needed in knowledge and practice, methodologies and approaches required to achieve these advances, and proposals for a follow-up process involving all stakeholders.

Download or read book A History of the Greek Language written by Francisco Rodríguez Adrados and published by BRILL. This book was released on 2005-10-01 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: A History of the Greek Language is a kaleidoscopic collection of ideas on the development of the Greek language through the centuries of its existence.

Download or read book Microwave Devices and Circuits written by Samuel Y. Liao and published by Pearson Education India. This book was released on 1990-09 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nietzsche written by Renato Cristi and published by University of Wales Press. This book was released on 2015-11-11 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: A translation of Nietzsche’s valedictorian dissertation at Pforta Extensive account of Nietzsche political philosophy Extensive discussion concerning the secondary literature on Nietzsche’s political philosophy

Download or read book Semiconductor Device Reliability written by A. Christou and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is a compilation of papers presented at the Semiconductor Device Reliabi lity Workshop sponsored by the NATO International Scientific Exchange Program. The Workshop was held in Crete, Greece from June 4 to June 9, 1989. The objective of the Workshop was to review and to further explore advances in the field of semiconductor reliability through invited paper presentations and discussions. The technical emphasis was on quality assurance and reliability of optoelectronic and high speed semiconductor devices. The primary support for the meeting was provided by the Scientific Affairs Division of NATO. We are indebted to NATO for their support and to Dr. Craig Sinclair, who admin isters this program. The chapters of this book follow the format and order of the sessions of the meeting. Thirty-six papers were presented and discussed during the five-day Workshop. In addi tion, two panel sessions were held, with audience participation, where the particularly controversial topics of bum-in and reliability modeling and prediction methods were dis cussed. A brief review of these sessions is presented in this book.

Download or read book Bacterial Diversity in Sustainable Agriculture written by Dinesh K. Maheshwari and published by Springer. This book was released on 2014-09-04 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: The earth’s biodiversity is a degree of ecosystem health which is vital to ecology and environmental sustainability. The microbial world is the largest unexplored reservoir. The agro-ecosystem enriched with rhizosphere implicit abundant and species-rich component of microbial diversity. Its global exploration designs a worldwide framework for agricultural sustainability adjoining benefits in its conservation. Agricultural sustainability requires a major share from ecosystem management which is better paid by microbial diversity and conservation. Diversity of bacteria influences plant productivity providing nutrient convenience from soil instead altering per se community and diversity in the rhizosphere where they may influence mechanistic competent and antagonistic micro-flora. The potential species among the diversity are therefore, essential subjective to their maintenance for use around the globe. Microbial population in agro-ecosystem is influenced by stresses, reduce functionality as a component. It is therefore, important to explore secrets of planned strategy so as to unravel the microbial diversity and conservation in agricultural development. Microorganisms are minute, pervasive in nature and alleged as disease host instead tiny recognize as employee of agro-ecosystem, indulge in agricultural development and potential contributor in world of ecological and economical wealth creation. This step pertinently would help to launch scientific motivation needed to support the refrain of microbial diversity and conservation.

Download or read book Handbook of Chemical Vapor Deposition written by Hugh O. Pierson and published by William Andrew. This book was released on 1999-09-01 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turn to this new second edition for an understanding of the latest advances in the chemical vapor deposition (CVD) process. CVD technology has recently grown at a rapid rate, and the number and scope of its applications and their impact on the market have increased considerably. The market is now estimated to be at least double that of a mere seven years ago when the first edition of this book was published. The second edition is an update with a considerably expanded and revised scope. Plasma CVD and metallo-organic CVD are two major factors in this rapid growth. Readers will find the latest data on both processes in this volume. Likewise, the book explains the growing importance of CVD in production of semiconductor and related applications.

Download or read book Advances in Chemical Mechanical Planarization CMP written by Babu Suryadevara and published by Woodhead Publishing. This book was released on 2021-09-10 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Chemical Mechanical Planarization (CMP), Second Edition provides the latest information on a mainstream process that is critical for high-volume, high-yield semiconductor manufacturing, and even more so as device dimensions continue to shrink. The second edition includes the recent advances of CMP and its emerging materials, methods, and applications, including coverage of post-CMP cleaning challenges and tribology of CMP. This important book offers a systematic review of fundamentals and advances in the area. Part one covers CMP of dielectric and metal films, with chapters focusing on the use of current and emerging techniques and processes and on CMP of various materials, including ultra low-k materials and high-mobility channel materials, and ending with a chapter reviewing the environmental impacts of CMP processes. New content addressed includes CMP challenges with tungsten, cobalt, and ruthenium as interconnect and barrier films, consumables for ultralow topography and CMP for memory devices. Part two addresses consumables and process control for improved CMP and includes chapters on CMP pads, diamond disc pad conditioning, the use of FTIR spectroscopy for characterization of surface processes and approaches for defection characterization, mitigation, and reduction. Advances in Chemical Mechanical Planarization (CMP), Second Edition is an invaluable resource and key reference for materials scientists and engineers in academia and R&D. - Reviews the most relevant techniques and processes for CMP of dielectric and metal films - Includes chapters devoted to CMP for current and emerging materials - Addresses consumables and process control for improved CMP, including post-CMP

Download or read book Toward a Science Campus in Milan written by Pier Francesco Bortignon and published by Springer. This book was released on 2018-12-08 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of multidisciplinary papers presented at the Department of Physics of Milan University's congress on 28 and 29 June 2017, which was also intended as a kick-off meeting for the design of a novel science campus at the Expo site in Milan. The congress presented a snapshot of the department's research to the academic community, the media, policymakers and authorities as well as the public at large, and also provided an opportunity to strengthen interdisciplinary collaborations between the members of the department and other communities. This book is a valuable resource for scientists looking for synergetic projects, policymakers wanting to grasp scientists' points of view and for prospective graduate students seeking expanding areas of research.

Download or read book Polymer Gels written by D. DeRossi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a series of papers originally presented at the Symposium on Polymer Gels organized and sponsored by the Research Group on Polymer Gels,The Society of Polymer Science of Japan and co-sponsored by the Science and Technology Agency (ST A) and MIT!, Japan. The Symposium took place at Tsukuba Science City on 18th and 19th September, 1989. Recognized experts in their fields were invited to speak and there was a strong attendance from government, academic and industrial research centers. The purpose of the Symposium was to review the state of the art and to present and discuss recent progress in the understanding of the behavioral properties of polymer gels and their application to biomedical, environmental and robotic fields. Most of the papers and related discussions concentrated on the swelling behavior of hydrogels and chemomechanical systems, both artificial and naturally occurring, in which external stimuli of a physical or chemical nature control energy transformation or signal transduction. The recent great interest in chemomechanical systems based on polymer gels has stimulated considerable effort towards the development of new sensors and actuators, controllable membrane separation processes, and delivery systems in which the functions of sensing, processing and actuation are all built into the polymeric network device. Artificial chemomechanical systems, through the use of environmentally sensitive polymer gels, are emerging as interesting materials for mimicking basic processes previously only confined to the biological world, and commercially viable applications are also foreseen in the not-too-distant future.

Download or read book Polymer Science and Nanotechnology written by Ravin Narain and published by Elsevier. This book was released on 2020-06-16 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Science and Nanotechnology: Fundamentals and Applications brings together the latest advances in polymer science and nanoscience. Sections explain the fundamentals of polymer science, including key aspects and methods in terms of molecular structure, synthesis, characterization, microstructure, phase structure and processing and properties before discussing the materials of particular interest and utility for novel applications, such as hydrogels, natural polymers, smart polymers and polymeric biomaterials. The second part of the book examines essential techniques in nanotechnology, with an emphasis on the utilization of advanced polymeric materials in the context of nanoscience. Throughout the book, chapters are prepared so that materials and products can be geared towards specific applications. Two chapters cover, in detail, major application areas, including fuel and solar cells, tissue engineering, drug and gene delivery, membranes, water treatment and oil recovery. - Presents the latest applications of polymers and polymeric nanomaterials, across energy, biomedical, pharmaceutical, and environmental fields - Contains detailed coverage of polymer nanocomposites, polymer nanoparticles, and hybrid polymer-metallic nanoparticles - Supports an interdisciplinary approach, enabling readers from different disciplines to understand polymer science and nanotechnology and the interface between them

Download or read book A Casual Revolution written by Jesper Juul and published by MIT Press. This book was released on 2012-02-10 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: How casual games like Guitar Hero, Bejeweled, and those for Nintendo Wii are expanding the audience for video games. We used to think that video games were mostly for young men, but with the success of the Nintendo Wii, and the proliferation of games in browsers, cell phone games, and social games video games changed changed fundamentally in the years from 2000 to 2010. These new casual games are now played by men and women, young and old. Players need not possess an intimate knowledge of video game history or devote weeks or months to play. At the same time, many players of casual games show a dedication and skill that is anything but casual. In A Casual Revolution, Jesper Juul describes this as a reinvention of video games, and of our image of video game players, and explores what this tells us about the players, the games, and their interaction. With this reinvention of video games, the game industry reconnects with a general audience. Many of today's casual game players once enjoyed Pac-Man, Tetris, and other early games, only to drop out when video games became more time-consuming and complex. Juul shows that it is only by understanding what a game requires of players, what players bring to a game, how the game industry works, and how video games have developed historically that we can understand what makes video games fun and why we choose to play (or not to play) them. Important Notice: The digital edition of this book is missing some of the images found in the physical edition.