Download or read book Mechatronic Systems and Materials VII written by Inga Skiedraite and published by Trans Tech Publications Ltd. This book was released on 2016-07-19 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current volume contains some new results in mechatronic systems, mechanics and materials, as well as in aspects of automatics and robotics in relevant technological applications, which were presented in the 11th International Conference Mechatronic Systems and Materials (MSM 2015). The book contains the latest theoretical and practical experiences of scientists and researchers from universities and research centers. The main objective of this volume is the dissemination of the scientific knowledge to better understanding of widely considered mechatronic and material systems. Moreover, the aim of the issue is to interconnect diverse scientific fields and exchange current views between scientists and researchers.
Download or read book Mechatronic Systems Sensors and Actuators written by Robert H. Bishop and published by CRC Press. This book was released on 2017-07-28 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the key elements of physical systems modeling, sensors and actuators, signals and systems, computers and logic systems, and software and data acquisition. It describes mathematical models of the mechanical, electrical, and fluid subsystems that comprise many mechatronic systems.
Download or read book Mechatronics and Robotics written by Marina Indri and published by CRC Press. This book was released on 2020-11-24 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term “mechatronics” was coined in 1969, merging “mecha” from mechanism and “tronics” from electronics, to reflect the original idea at the basis of this discipline, that is, the integration of electrical and mechanical systems into a single device. The spread of this term, and of mechatronics itself, has been growing in the years, including new aspects and disciplines, like control engineering, computer engineering and communication/information engineering. Nowadays mechatronics has a well-defined and fundamental role, in strict relation with robotics. Drawing a sharp border between mechatronics and robotics is impossible, as they share many technologies and objectives. Advanced robots could be defined as mechatronic devices equipped with a “smart brain”, but there are also up-to-date mechatronic devices, used in tight interaction with humans, that are governed by smart architectures (for example, for safety purposes). Aim of this book is to offer a wide overview of new research trends and challenges for both mechatronics and robotics, through the contribution of researchers from different institutions, providing their view on specific subjects they consider as “hot topics” in both fields, with attention to new fields of application, new challenges to the research communities and new technologies available. The reader of this book will enjoy the various contributions, as they have been prepared with actual applications in mind, along a journey from advanced actuators and sensors to human-robot interaction, through robot control, navigation, planning and programming issues. The book presents several state-of-the-art solutions, like multiple-stage actuation to cope with conflicting specification of large motion-spans, ultra-high accuracy, model-based control for high-tech mechatronic systems, modern approaches of software systems engineering to robotics, aand humanoids for human assistance. The reader can also find new techniques in approaching the design of mechatronic systems in some possible industrial and service robotics scenarios, with a particular attention for the interaction between humans and mechanisms.
Download or read book Mechatronic Systems and Materials Mechatronic Systems and Robotics written by Andrejus Henrikas Marcinkevi?ius and published by Trans Tech Publications Ltd. This book was released on 2010-06-30 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). The aim of this collection was to provide an opportunity for the sharing of information and to facilitate cooperation in mechatronics and new materials research, and to disseminate new research results in this multi-disciplinary field.
Download or read book Mechatronic Systems and Materials written by Nin Bizys and published by . This book was released on 2006 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises a collection of papers arising from the 1st International Conference on Mechatronic Systems and Materials (MSM 2005), which was held in Vilnius from the 20th -to 23rd October 2005.
Download or read book Mechatronic Systems written by Rolf Isermann and published by Springer Science & Business Media. This book was released on 2007-12-29 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronic Systems introduces these developments by considering the dynamic modelling of components together with their interactions. The whole range of elements is presented from actuators, through different kinds of processes, to sensors. Structured tutorial style takes learning from the basics of unified theoretical modelling, through information processing to examples of system development. End-of-chapter exercises provide ready-made homework or self-tests. Offers practical advice for engineering derived from experience with real systems and application-oriented research.
Download or read book Mechatronic Systems and Materials IV written by Zdzis?aw Gosiewski and published by Trans Tech Publications Ltd. This book was released on 2013-03-11 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters BCI (WoS). The 121 peer reviewed papers on Mechatronic Systems and Materials are grouped as follows: I. Robotics: Industrial Robots, Microrobotics; II. Mobile Robots; III. Unmanned Aerial Vehicles; IV. Teleoperation, Telerobotics, Teleoperated Semi-Autonomous Systems; V. Sensors and Actuators in Mechatronics; VI. Control of Mechatronic Systems; VII. Analysis of Vibration and Deformation.
Download or read book Mechatronic Systems and Materials VIII written by Zdzis?aw Gosiewski and published by Trans Tech Publications Ltd. This book was released on 2017-07-12 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected papers by results of the 12th International Conference Mechatronic Systems and Materials (MSM2016, Bialystok, Poland, July 3-8, 2016) and will be useful for researchers, engineers and scientists whose activity related to the designing of modern mechatronic systems for various applications - from the intellegent measurment devices to robotic systems for manufacture and space researches.
Download or read book Mechatronic Systems 2 written by Leonid Polishchuk and published by Routledge. This book was released on 2021-12-21 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second volume of the series is devoted to applications of mechatronics in material processing and robotics. Both classical machining methods, such as extrusion, forging and milling, and modern ones, such as plasma and ultrasonic machining, are analyzed. An extensive part covers the modeling of these processes, also from a phenomenological point of view. The study analyzes the issues related to robotics in various technological processes as well.
Download or read book Mechatronic Systems and Materials II written by Inga Skiedraite and published by Trans Tech Publications Ltd. This book was released on 2008-09-26 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This interesting volume is divided into eight sections; each of which covers an aspect of the subject-matter: i) Robotics: Industrial, Microrobotics, Mobile Robots; ii) Sensors and Actuators in Mechatronics; iii) Analysis of Vibration; iv) Failure Analysis; v) Measurement Techniques; vi) Materials (properties, modeling, manufacturing and processing); vii) Education in the Fields of Mechatronic and Materials Science.
Download or read book Multibody Mechatronic Systems written by Martín Pucheta and published by Springer Nature. This book was released on 2020-10-22 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances, innovations, and applications in the field of multibody and mechatronic systems. Topics addressed include the analysis and synthesis of mechanisms; dynamics of multibody systems; design algorithms for mechatronic systems; robots and micromachines; experimental validations; theory of mechatronic simulation; mechatronic systems for rehabilitation and assistive technologies; mechatronic systems for energy harvesting; virtual reality integration in multibody and mechatronic systems; multibody design in robotic systems; and control of mechatronic systems. The contents reflect the outcomes of the 7th International Symposium on Multibody Systems and Mechatronics (7th MuSMe) in 2020, within the framework of the FEIbIM Commission for Robotics and Mechanisms and IFToMM Technical Committees for Multibody Dynamics and for Robotics and Mechatronics.
Download or read book Interdisciplinary Mechatronics written by M. K. Habib and published by John Wiley & Sons. This book was released on 2013-05-06 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics represents a unifying interdisciplinary and intelligent engineering science paradigm that features an interdisciplinary knowledge area and interactions in terms of the ways of work and thinking, practical experiences, and theoretical knowledge. Mechatronics successfully fuses (but is not limited to) mechanics, electrical, electronics, informatics and intelligent systems, intelligent control systems and advanced modeling, intelligent and autonomous robotic systems, optics, smart materials, actuators and biomedical and biomechanics, energy and sustainable development, systems engineering, artificial intelligence, intelligent computer control, computational intelligence, precision engineering and virtual modeling into a unified framework that enhances the design of products and manufacturing processes. Interdisciplinary Mechatronics concerns mastering a multitude of disciplines, technologies, and their interaction, whereas the science of mechatronics concerns the invention and development of new theories, models, concepts and tools in response to new needs evolving from interacting scientific disciplines. The book includes two sections, the first section includes chapters introducing research advances in mechatronics engineering, and the second section includes chapters that reflects the teaching approaches (theoretical, projects, and laboratories) and curriculum development for under- and postgraduate studies. Mechatronics engineering education focuses on producing engineers who can work in a high-technology environment, emphasize real-world hands-on experience, and engage in challenging problems and complex tasks with initiative, innovation and enthusiasm. Contents: 1. Interdisciplinary Mechatronics Engineering Science and the Evolution of Human Friendly and Adaptive Mechatronics, Maki K. Habib. 2. Micro-Nanomechatronics for Biological Cell Analysis and Assembly, Toshio Fukuda, Masahiro Nakajima, Masaru Takeuchi, Tao Yue and Hirotaka Tajima. 3. Biologically Inspired CPG-Based Locomotion Control System of a Biped Robot Using Nonlinear Oscillators with Phase Resetting, Shinya Aoi. 4. Modeling a Human’s Learning Processes toward Continuous Learning Support System, Tomohiro Yamaguchi, Kouki Takemori and Keiki Takadama. 5. PWM Waveform Generation Using Pulse-Type Hardware Neural Networks, Ken Saito, Minami Takato, Yoshifumi Sekine and Fumio Uchikoba. 6. Parallel Wrists: Limb Types, Singularities and New Perspectives, Raffaele Di Gregorio. 7. A Robot-Assisted Rehabilitation System – RehabRoby, Duygun Erol Barkana and Fatih Özkul. 8. MIMO Actuator Force Control of a Parallel Robot for Ankle Rehabilitation, Andrew Mcdaid, Yun Ho Tsoi and Shengquan Xie. 9. Performance Evaluation of a Probe Climber for Maintaining Wire Rope, Akihisa Tabata, Emiko Hara and Yoshio Aoki. 10. Fundamentals on the Use of Shape Memory Alloys in Soft Robotics, Matteo Cianchetti. 11. Tuned Modified Transpose Jacobian Control of Robotic Systems, S. A. A. Moosavian and M. Karimi. 12. Derivative-Free Nonlinear Kalman Filtering for PMSG Sensorless Control, Gerasimos Rigatos, Pierluigi Siano and Nikolaos Zervos. 13. Construction and Control of Parallel Robots, Moharam Habibnejad Korayem, Soleiman Manteghi and Hami Tourajizadeh. 14. A Localization System for Mobile Robot Using Scanning Laser and Ultrasonic Measurement, Kai Liu, Hongbo Li and Zengqi Sun. 15. Building of Open-Structure Wheel-Based Mobile Robotic Platform, Aleksandar Rodic and Ivan Stojkovic. 16. Design and Physical Implementation of Holonomous Mobile Robot–Holbos, Jasmin Velagic, Admir Kaknjo, Faruk Dautovic, Muhidin Hujdur and Nedim Osmic. 17. Advanced Artificial Vision and Mobile Devices for New Applications in Learning, Entertainment and Cultural Heritage Domains, Gian Luca Foresti, Niki Martinel, Christian Micheloni and Marco Vernier. 18. Application of Stereo Vision and ARM Processor for Motion Control, Moharam Habibnejad Korayem, Michal Irani and Saeed Rafee Nekoo. 19. Mechatronics as Science and Engineering – or Both, Balan Pillai and Vesa Salminen. 20. A Mechatronic Platform for Robotic Educational Activities, Ioannis Kostavelis, Evangelos Boukas, Lazaros Nalpantidis and Antonios Gasteratos. 21. The Importance of Practical Activities in the Formation of Mechatronic Engineers, Joao Carlos M. Carvalho and Vera Lúcia D.S. Franco About the Authors Maki K. Habib is Professor of Robotics and Mechatronics in the School of Science and Engineering, at the American University in Cairo, Egypt. He has been regional editor (Africa/Middle East,) for the International Journal of Mechatronics and Manufacturing Systems (IJMMS) since 2010. He is the recipient of academic awards and has published many articles and books. J. Paulo Davim is Aggregate Professor in the Department of Mechanical Engineering at the University of Aveiro, Portugal and is Head of MACTRIB (Machining and Tribology Research Group). His main research interests include manufacturing, materials and mechanical engineering.
Download or read book MECHATRONICS written by M. D. SINGH and published by PHI Learning Pvt. Ltd.. This book was released on 2006-10-07 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics is today fast developing as an interdisciplinary branch of engineering. This book offers a comprehensive coverage of the design and application of mechatronic systems. It discusses in detail the construction, operation, features and applications of various components of mechatronic systems. The text, profusely illustrated with diagrams, emphasizes the readers’ multidisciplinary skills and ability to design and maintain different mechatronic systems. Key Features : • Motivational assignments given at the end of each chapter and the Case Studies provided at the end of the book direct the readers to applications of mechatronics concepts in the real-world problems encountered in engineering practice. • Separate chapters are devoted to the advanced topics of Robotics and Microelectromechanical Systems (MEMS). • The text is supported by a fair number of photographs of mechatronic systems and their components. This student-friendly text is primarily intended for the students of undergraduate and diploma courses in mechanical, electronics, industrial, and mechatronics engineering. It will also be of immense use to practising engineers.
Download or read book Mechatronic Systems 2 written by Leonid Polishchuk and published by Routledge. This book was released on 2021 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second volume of the series is devoted to applications of mechatronics in material processing and robotics. Both classical machining methods, such as extrusion, forging and milling, and modern ones, such as plasma and ultrasonic machining, are analyzed. An extensive part covers the modeling of these processes, also from a phenomenological point of view. The study analyzes the issues related to robotics in various technological processes as well.
Download or read book Recent Developments in Mechatronics and Intelligent Robotics written by Feng Qiao and published by Springer. This book was released on 2017-11-11 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the Proceedings of the International Conference on Mechatronics and Intelligent Robotics (ICMIR2017), held in Kunming, China, on May 20–21, 2017. The book covers a total of 172 papers, which have been divided into seven different sections: Intelligent Systems, Intelligent Sensors & Actuators, Robotics, Mechatronics, Modeling & Simulation, Automation & Control, and Robot Vision. ICMIR2017 provided a vital forum for discussing the latest and most innovative ideas from both the industrial and academic worlds, and for sharing best practices in the fields of mechanical engineering, mechatronics, automatic control, electrical engineering, finite element analysis and computational engineering. The main focus of the conference was on promoting interaction between academia and industry, allowing the free exchange of ideas and challenges faced by these two key stakeholders and encouraging future collaboration between the members of these groups. The proceedings cover new findings in the following areas of research and will offer readers valuable insights: Mechatronics Intelligent mechatronics, robotics and biomimetics; Novel and unconventional mechatronic systems; Modeling and control of mechatronics systems; Elements, structures and mechanisms of micro and nano systems; Sensors, wireless sensor networks and multi-sensor data fusion; Biomedical and rehabilitation engineering, prosthetics and artificial organs; Artificial Intelligence (AI), neural networks and fuzzy logic in mechatronics and robotics; Industrial automation, process control and networked control systems; Telerobotics, Human–Computer Interaction; and Human–Robot Interaction. Robotics Artificial Intelligence; Bio-inspired robotics; Control algorithms and control systems; Design theories and principles; Evolutional robotics; Field robotics; Force sensors, accelerometers, and other measuring devices; Healthcare robotics; Human–Robot Interaction; Kinematics and dynamics analysis; Manufacturing robotics; Mathematical and computational methodologies in robotics; Medical robotics; Parallel robots and manipulators; Robotic cognition and emotion; Robotic perception and decisions; Sensor integration, fusion, and perception; and Social robotics.
Download or read book Mechatronic Systems Applications written by Teodor Piatek and published by . This book was released on 2016-08-01 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics is a blend of mechanical engineering, electrical engineering, computer control and information technology. Mechatronics is a design process to create more functional and adaptable products. By integrating the best design practices with the most advanced technologies, mechatronics aims at comprehending high-quality products, promising at the same time a substantial reduction of time and costs of manufacturing. Mechatronic systems are manifold and range from machine components, motion generators, and power producing machines to more complex devices, such as robotic systems and transportation vehicles. Over the years mechatronics has come to mean a methodology for designing products that exhibit fast, precise performance. These characteristics can be achieved by considering not only the mechanical design, but also the use of servo controls, sensors, and electronics. Mechatronics has been popular in Japan and Europe for many years but has been slow to gain industrial and academic acceptance as a field and practice in Great Britain and the United States. In the past, machine and product design has been the domain of mechanical engineers. After the machine was designed by mechanical engineers, solutions to control and programming problems were added by software and computer engineers. This sequential-engineering approach usually resulted in less-than-optimal designs and is now recognized as less than optimal itself. The prime role of mechatronics is one of initiation and integration throughout the entire design process, with the mechatronics engineer as the leader. Mechatronic Systems Applications delivers an excellent review of contemporary work in the sphere of mechatronics with applications in numerous fields, like robotics, medical and assistive technology, human-machine interaction, unmanned vehicles, manufacturing, and education. Experts in the interdisciplinary mechatronics field must be able to use the special knowledge resources of other people and the particular blend of technologies that will provide the most economic, innovative, elegant, and appropriate solution to the problem at hand. Industry needs mechatronics engineers to continue to rapidly develop innovative products with performance, quality and low cost.
Download or read book Mechatronic Systems and Materials VI written by Algirdas Vaclovas Valiulis and published by Trans Tech Publications Ltd. This book was released on 2015-01-28 with total page 1068 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 9th International Conference on Mechatronic Systems and Materials (MSM 2013), July 13, 2013, Vilnius, Lithuania. The 170 papers are grouped as follows: Chapter 1: Mechatronic Systems I: (Industrial Robotics; Microrobotics; Mobile Robots; Analysis of Vibration), Chapter 2: Mechatronic Systems II: (Optimization; Optimal Design; Integrated Diagnostics; Failure Analysis; Tribology in Mechatronics Systems; Analysis of Signals), Chapter 3: Mechatronic Systems III: (Applications of Artificial Intelligence; Sensors and Actuators in Mechatronics; Control of Mechatronics Systems), Chapter 4: Materials: (Multifunctional and Smart Materials; Metallic Alloys; Piezoelectric Materials; Nanomaterials; Ceramics and Glasses; Biomaterials and Technology; Coatings and Properties), Chapter 5: Engineering Technologies: (Advanced and Digital Manufacturing; Systems Engineering; Micro and Nano Technologies; Materials Joining Technologies; Modeling and Optimization of Processes), Chapter 6: Education: (New Trends and Curricula for BSC and MSC in Two Tier Higher Education in the Fields of Mechatronic Systems and Materials Science)
