Download or read book Mechanisms of Polymer Degradation and Stabilisation written by G. Scott and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this publication is two-fold. In the first place it is intended to review progress in the development of practical stabilising systems for a wide range of polymers and applications. A complemen tary and ultimately more important objective is to accommodate these practical developments within the framework of antioxidant theory, since there can be little question that further major advances in the practice of stabilisation technology will only be possible on a firm mechanistic foundation. With the continual increase in the number of commercial anti oxidants and stabilisers, often functioning by mechanisms not even considered ten years ago, there is a need for a general theory which will allow the potential user to predict the performance of a particular antioxidant structure under specific practical conditions. Any such predictive tool must involve a simplified kinetic approach to inhibited oxidation and, in Chapter 1, Denisov outlines a possible mechanistic approach with the potential to predict the most useful antioxidant to use and the limits of its usefulness. In Chapter 2, Schwetlick reviews the current state of knowledge on the antioxidant mechanisms of the phosphite esters with particular emphasis on their catalytic peroxidolytic activity. Dithiophosphate v vi PREFACE derivatives show a similar behaviour but for quite different reasons and, in Chapter 3, AI-Malaika reviews information available from analytical studies, particularly using 31p_NMR spectroscopy, to elucid ate the complex chemistry that leads to the formation of the antioxidant -active agents.
Download or read book Polymer Degradation and Stabilization written by W. L. Hawkins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of polymers as an important class of material was inhibited at the first by the premature failure of these versatile compounds in many applications. The deterioration of important properties of both natural and synthetic polymers is the result of irreversible changes in composition and structure of polymers molecules. As a result of these reactions, mechanical, electrical and/or aesthetic properties are degraded beyond acceptable limits. It is now generally recognized that stabilization against degradation is necessary if the useful life of polymers is to be extended sufficiently to meet design requirements for long-term applications. Polymers degrade by a wide variety of mechanisms, several of which affect all polymers through to varying degree. This monograph will concentrate on those degradation mechanisms which result from reactions of polymers with oxygen in its various forms and which are accelerated by heat and/or radiation. Those stabilization mechanisms are discussed which are based on an understanding of degradation reaction mechanisms that are reasonably well established. The stabilization of polymers is still undergoing a transition from an art to a science as mechanisms of degradation become more fully developed. A scientific approach to stabilization can only be approached when there is an understanding of the reactions that lead to degradation. Stabilization against biodegradation and burning will not be discussed since there is not a clear understanding of how polymers degrade under these conditions.
Download or read book Polymer Degradation and Stabilisation written by Norman Grassie and published by CUP Archive. This book was released on 1988-04-14 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of polymer degradation and stabilisation is of considerable practical importance as the industrial uses of polymeric materials continue to expand. In this book, the authors lucidly relate technological phenomena to the chemistry and physics of degradation and stabilisation processes. Degradation embraces a variety of technologically important phenomena ranging from relatively low temperature processes such as 'weathering' of plastics, 'fatigue' of rubbers through the processing of polymers in shearing mixers to very high temperature processes such as flammability and ablation. All these technological phenomena have in common certain basic chemical reactions. Thus 'weathering' has its roots in photo-oxidation, 'fatigue' and melt-degradation in mechano-oxidation and flammability, and ablation in ablation in pyrolysis and vapour phase oxidation.
Download or read book Fundamentals of Polymer Degradation and Stabilization written by N.S. Allen and published by Springer Science & Business Media. This book was released on 1992-10-31 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past decade, the field of polymer degradation and stabilization has become a subject of central importance in polymer science and technology. This book provides a fundamental source of information designed for those with only a basic understanding of the background of the field.
Download or read book Degradation and Stabilisation of PVC written by J. Owen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyvinyl chloride has played a key role in the development of the plastics industry over the past 40 years and continues to be a polymer of major importance. The reasons for its enormous versatility and range of application derive from a combination of the basic structure which gives rise to a relatively tough and rigid material and its ability to accept a range of plasticisers and other additives which can modify its physical characteristics to produce a range of flexible products. Two major problems, however, have tested the skill and ingenuity of PVC technologists since earliest times. One is the thermal instability of the material at the temperatures required for melt processing and fabrication, and the second is the photochemical instability which until recently has limited the potentially large range of outdoor applications. Both problems have been handled in a commercially satisfactory way by the gradual development of a range of stabilisers, lubricants and other processing aids and the high quality material which has resulted has led to massive utilisation of PVC by industry. Totally adequate stabilisation requires a detailed understanding of the mechanisms by which degradation processes are initiated and propagated. Although great advances have been made in this respect in recent years the problem remains incompletely understood. This book presents an account of the present position and the problems which remain to be solved.
Download or read book Stabilization of Polymeric Materials written by Hans Zweifel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics are used worldwide in everyday life, e.g. as food packaging, electronics, construction, automotive parts, and household appliances. To produce these products with the desired service lifetimes the use of suitable stabilizers is necessary. This book provides a concise and comprehensive overview of the basic mechanisms of plastic degradation processes caused by heat and light. At its core is a detailed description of the stabilization of different polymers, including an explanation of stabilization mechanisms and the influence of commonly used additives such as fillers, flame retardents and pigments on the stability of plastic. Every polymer scientist, material technologist, or application engineer dealing with the design of the properties of plastics will benefit from this new overview.
Download or read book Photostabilization of Polymers written by J.F. Rabek and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last two decades, the production of polymers and plastics has been increasing rapidly. In spite of developing new polymers and polymeric materials, only 40-60 are used commercially on a large scale. It has been estimated that half of the annual production of polymers is employed outdoors. Increasing the stability of polymers and plastics towards heat, light, atmospheric oxygen and other environmental agents and weathering conditions has always been a very important problem. The photochemical instability of most of polymers limits them to outdoor application, where they are photo degraded fast over periods ranging from months to a few years. To the despair of technologists and consumers alike, photodegrada tion and environmental ageing of polymers occur much faster than can be expected from knowledge collected in laboratories. In many cases, improved methods of preparation and purification of both monomers and polymers yield products of better quality and higher resistance to heat and light. However, without stabilization of polymers by applica tion of antioxidants (to decrease thermal oxidative degradation) and photostabilizers (to decrease photo-oxidative degradation) it would be impossible to employ polymers and plastics in everyday use.
Download or read book Plastics Additives written by G. Pritchard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although plastics are extremely successful commercially, they would never reach acceptable performance standards either in properties or processing without the incorporation of additives. With the inclusion of additives, plastics can be used in a variety of areas competing directly with other materials, but there are still many challenges to overcome. Some additives are severely restricted by legislation, others interfere with each other-in short their effectiveness varies with circumstances. Plastics Additives explains these issues in an alphabetical format making them easily accessible to readers, enabling them to find specific information on a specific topic. Each additive is the subject of one or more articles, providing a suffinct account of each given topic. An international group of experts in additive and polymer science, from many world class companies and institutes, explain the recent rapid changes in additive technology. They cover novel additives (scorch inhibitors, compatibilizers, surface-modified particulates etc.), the established varieties (antioxidants, biocides, antistatic agents, nucleating agents, fillers, fibres, impact modifiers, plasticizers) and many others, the articles also consider environmental concerns, interactions between additives and legislative change. With a quick reference guide and introductory articles that provide the non-specialist and newcomer with relevant information, this reference book is essential reading for anyone concerned with plastics and additives.
Download or read book Physical Properties of Polymers written by James E. Mark and published by . This book was released on 1993 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contents have been divided into sections on physical states of polymers and characterization techniques. Chapters on physical states include discussions of the rubber elastic state, the glassy state, melts and concentrated solutions, the crystalline state, and the mesomorphic state. Characterization techniques described are molecular spectroscopy and scattering techniques.
Download or read book Photochemistry of Man made Polymers written by John F. McKellar and published by . This book was released on 1979 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Degradation and Stabilisation of Polyolefins written by Norman S. Allen and published by . This book was released on 1983 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Degradation Mechanisms written by United States. National Bureau of Standards and published by . This book was released on 1953 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Photodegradation of Polymers written by Jan F. Rabek and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book on physical characteristics and practical aspects of polymer photodegradation Rabek emphasizes the experimental work on the subject. The most important feature of the book is the physical interpretation of polymer degradation, e.g. mechanism of UV/light absorption, formation of excited states, energy transfer mechanism, kinetics, dependence on physical properties of macromolecules and polymer matrices, formation of mechanical defects, practics during environmental ageing. He includes also some aspects of polymer photodegradation in environmental and space condition.
Download or read book Modern Technology of Plastic Polymer Processing Industries written by NIIR Board and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2003-06-04 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Indian plastic and polymer industry has taken great strides. In the last few decades, the industry has grown to the status of a leading sector in the country with a sizable base. The material is gaining notable importance in different spheres of activity and the per capita consumption is increasing at a fast pace. Continuous advancements and developments in polymer technology, processing machineries, expertise and cost effective manufacturing is fast replacing the typical materials in different segments with plastics. Plastics play a very important role in our daily lives. Throughout the world the demand for plastic, particularly plastic packaging, continues to rapidly grow. Polymer processing industry deals with the manufacture and production of polymer and synthetic substances for example acrylic plastics: poly (methyl methacrylate), poly vinyl chloride (PVC), polyamides, polyesters, cellulose plastics etc. Plastic is incredibly versatile and can be made from different ingredients, moulded into any shape, and put to a huge range of uses across industry and the rest of society. Polymer Energy system is an award winning, innovative, proprietary process to convert waste plastics into renewable energy. Polymers are the most rapidly growing sector of the materials industry. No wonder polymers are found in everything from compact discs to high tech aerospace applications. On the basis of value added, Indian share of plastic products industry is about 0.5% of national GDP. This book majorly deals with properties and applications of engineering, the strength of thermoplastic composites, and the application of thermoplastic structural composites, applications of differential scanning, calorimetry and polymer characterization, polymer degradation and stabilization, advances in photo degradation and stabilization of polyurethanes and so on. This book also consists of raw material suppliers for plastic and plastic products, manufacturers of plastic processing machinery, plastics processing machinery and equipment (foreign), machinery and equipment for plastic converting, extruders and extrusion lines, injection moulding machines and so on. This book offers, in standardized and readily accessible information on the synthesis, structure, properties and applications of the most important polymeric materials. It has been designed as a text giving a balanced coverage of the science and technology of polymers finding major applications plastics. This book is very useful for industrialists, consultants, research scholars and institutes. TAGS best small and cottage scale industries, Business consultancy, Business consultant, Copolymerization And Techniques Of Polymerization, Establish Plastic Product Making Plant, future of plastic industry in India, Get started in small-scale food manufacturing, Growth Polymerization, How Plastics Are Made, How to Start a plastic business?, How to Start a Plastic Manufacturing Business, how to start a plastic manufacturing business in India, How to Start a plastic Production Business, How to start a successful plastic business, how to start plastic industry, How to Start Plastic Manufacturing Industry (Plastics and Polymer Processing Industries), How to Start plastic Processing Industry in India, Indian plastics industry, modern small and cottage scale industries, Most Profitable plastic Processing Business Ideas, new small scale ideas in plastic processing industry, NPCS, Opportunity in the Indian Plastic Industry, plastic and polymer industry, plastic Based Small Scale Industries Projects, plastic business ideas, plastic business opportunities, plastic Business, plastic factory project plan, plastic factory setup, plastic industry in India, plastic industry process, plastic Making Small Business Manufacturing, Plastic Manufacturing Industry, plastic Processing & plastic Based Profitable Projects, plastic Processing Industry in India, plastic Processing Projects, Plastics & Polymers Technology Books, Plastics industry Plastics: Materials And Processing Technology, Polymer Characteristics, Polymer Degradation and Stabilization, Preparation of Project Profiles, Process technology books, Profitable Plastic Product Manufacturing Business, Profitable plastic Small Scale Manufacturing, profitable small and cottage scale industries, Project identification and selection, Properties and Applications of Thermoplastic, Setting up and opening your plastic Business, Small scale Commercial plastic making, small scale plastic production line, Starting a Plastic Manufacturing Plant: Startup Business, Starting a plastic Processing Business, Thermogravimetry, Thermoplastic Composites, Thermoplastic Structural
Download or read book Handbook of Polymer Degradation written by S. Halim Hamid and published by CRC Press. This book was released on 2000-06-30 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers recent advances in polymer degradation and stabilization. Focuses on the basics of photo- and bio-degradability. Delineates special and general environmental parameters such as solar irradiation, temperature, and agrochemical exposure. Surveys plastic waste disposal strategies such as recycling, incineration, chemical recovery by pyrolysis, and source reduction.
Download or read book Cellulose Nitrate in Conservation written by Charles M. Selwitz and published by Getty Publications. This book was released on 1988-04-01 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report attempts to isolate and separately examine each of the factors known to lead to cellulose nitrate decomposition, and then relate their contribution to the instability of the polymer when it is used as a bonding agent for ceramics and as a lacquer for metal objects. These factors include deterioration caused by heat, radiation, or acid impurities, or through the loss of plasticizer. There is, moreover, decomposition caused autocatalytically by the initial breakdown products. In particular, the publication examines new information on chemical changes under ambient conditions that has been developed recently through advances in analytical procedures such as chemiluminescence, X-ray scanning spectroscopy (ESCA), and more sophisticated viscometry. This new information will be added to the large body of data, collected over the past 150 years, on the instability of cellulose nitrate under more severe conditions.
Download or read book Degradable Polymers written by G. Scott and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Few scientific developments in recent years have captured the popular imagination like the subject of'biodegradable' plastics. The reasons for this are complex and lie deep in the human subconscious. Discarded plastics are an intrusion on the sea shore and in the countryside. The fact that nature's litter abounds in the sea and on land is acceptable because it is biodegradable - even though it may take many years to be bioassimilated into the ecosystem. Plastics litter is not seen to be biodegradable and is aesthetically unacceptable because it does not blend into the natural environment. To the environmentally aware but often scientifically naive, biodegradation is seen to be the ecologically acceptable solution to the problem of plastic packaging waste and litter and some packaging manufacturers have exploited the 'green' consumer with exaggerated claims to 'environmentally friendly' biodegradable packaging materials. The principles underlying environmental degradation are not understood even by some manufacturers of 'biodegradable' materials and the claims made for them have been categorized as 'deceptive' by USA legislative authorities. This has set back the acceptance of plastics with controlled biodegradability as part of the overall waste and litter control strategy. At the opposite end of the commercial spectrum, the polymer manufactur ing industries, through their trade associations, have been at pains to discount the role of degradable materials in waste and litter management. This negative campaign has concentrated on the supposed incompatibility of degradable plastics with aspects of waste management strategy, notably materials recycling.
