Download or read book Fundamentals of Creep in Metals and Alloys written by Michael E. Kassner and published by Elsevier. This book was released on 2004-04-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussionUnderstanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world's leading investigators.· Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials· Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures· Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion

Download or read book Testing of the Plastic Deformation of Metals written by T. W. Clyne and published by Cambridge University Press. This book was released on 2021-06-10 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover a novel approach to the subject, providing detailed information about established and innovative mechanical testing procedures.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1989 with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Report on Factors Affecting Shrinkage and Creep of Hardened Concrete written by ACI Committee 209--Creep and Shrinkage and published by . This book was released on 2005 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Plastic Deformation of Materials written by R. J. Arsenault and published by Elsevier. This book was released on 2013-10-22 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Materials Science and Technology, Volume 6: Plastic Deformation of Materials covers the fundamental properties and characterization of materials, ranging from simple solids to complex heterophase systems. The book presents articles on the low temperature of deformation of bcc metals and their solid-solution alloys; the cyclic deformation of metals and alloys; and the high-temperature diffusion-controlled creep of some metals and alloys, with particular reference to the various creep mechanisms. The text also includes articles on superplasticity; the fatigue deformation of polymers; the low temperature deformation of crystalline nonmetals; and the recovery and recrystallization during high temperature deformation. Professional scientists and engineers, as well as graduate students in materials science and associated fields will find the book invaluable.

Download or read book ASM Specialty Handbook written by Joseph R. Davis and published by ASM International. This book was released on 1997-01-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials covered include carbon, alloy and stainless steels; alloy cast irons; high-alloy cast steels; superalloys; titanium and titanium alloys; refractory metals and alloys; nickel-chromium and nickel-thoria alloys; structural intermetallics; structural ceramics, cermets, and cemented carbides; and carbon-composites.

Download or read book Plastic Deformation of Minerals and Rocks written by Shun-ichiro Karato and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-12-17 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 51 of Reviews in Mineralogy and Geochemistry highlights some of the frontiers in the study of plastic deformation of minerals and rocks. This book reviews large-strain shear deformation and deformation experiments under ultrahigh pressures; the issues of deformation of crustal rocks and the upper mantle; the interplay of partial melting and deformation; the new results of ultrahigh pressure deformation of deep mantle minerals; the stability of deformation under deep mantle conditions with special reference to phase transformations and their relationship to the origin of intermediate depth and deep-focus earthquakes; a detailed description of fracture mechanisms of ice; of experimental and theoretical studies on seismic wave attenuation; the relationship between crystal preferred orientation and macroscopic anisotropy; recent progress in poly-crystal plasticity to model the development of anisotropic fabrics both at the microscopic and macroscopic scale; a thorough review of seismic anisotropy of the upper mantle covering the vast regions of geodynamic interests and the theoretical aspects of shear localization. All chapters contain extensive reference lists to guide readers to the more specialized literature. This volume was written for a workshop, in December 2002 in Emeryville, California.

Download or read book Physical Metallurgy written by Gregory N. Haidemenopoulos and published by CRC Press. This book was released on 2018-02-07 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical metallurgy is one of the main fields of metallurgical science dealing with the development of the microstructure of metals in order to achieve desirable properties required in technological applications. Physical Metallurgy: Principles and Design focuses on the processing–structure–properties triangle as it applies to metals and alloys. It introduces the fundamental principles of physical metallurgy and the design methodologies for alloys and processing. The first part of the book discusses the structure and change of structure through phase transformations. The latter part of the books deals with plastic deformation, strengthening mechanisms, and mechanical properties as they relate to structure. The book also includes a chapter on physical metallurgy of steels and concludes by discussing the computational tools, involving computational thermodynamics and kinetics, to perform alloy and process design.

Download or read book Reliability of Microtechnology written by Johan Liu and published by Springer Science & Business Media. This book was released on 2011-02-07 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability of Microtechnology discusses the reliability of microtechnology products from the bottom up, beginning with devices and extending to systems. The book's focus includes but is not limited to reliability issues of interconnects, the methodology of reliability concepts and general failure mechanisms. Specific failure modes in solder and conductive adhesives are discussed at great length. Coverage of accelerated testing, component and system level reliability, and reliability design for manufacturability are also described in detail. The book also includes exercises and detailed solutions at the end of each chapter.

Download or read book Structural Geology written by A.R. Bhattacharya and published by Springer Nature. This book was released on 2022-09-01 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is a complete, up-to-date, and highly illustrated account of Structural Geology for students and professionals, and includes fundamentals of the subject with field and practical aspects. The book aims to be highly reader-friendly, containing simple language and brief introductions and summaries for each topic presented, and can be used both to refresh overall knowledge of the subject as well as to develop models for engineering projects in any area or region. The book is presented in 20 chapters and divided into 3 parts: (A) Fundamental Concepts, (B) Structures: Geometry and Genesis, and (C) Wider Perspectives. For the first time as full chapters in a textbook, the book discusses several modern field-related applications in Structural Geology, including shear-sense indicators, and deformation and metamorphism. Also uniquely included are colored photographs, side by side with line diagrams, of key deformation structures not seen in other books before now. Boxes in each chapter expand the horizons of the reader on the subject matter of the chapter. Questions at the end of each chapter, and detailed significance of the key structures, provide a better grasping to students. Glossary at the end of the book is a refreshing aspect for the readers. Though written primarily for undergraduate and graduate students, the text will also be of use to specialists and practitioners in engineering geology, petrology (igneous, sedimentary, and metamorphic), economic geology, groundwater geology, petroleum geology, and geophysics, and will appeal to beginners with no preliminary knowledge of the subject.

Download or read book Creep and High Temperature Deformation of Metals and Alloys written by Stefano Spigarelli and published by MDPI. This book was released on 2019-12-12 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: By the late 1940s, and since then, the continuous development of dislocation theories have provided the basis for correlating the macroscopic time-dependent deformation of metals and alloys—known as creep—to the time-dependent processes taking place within the metals and alloys. High-temperature deformation and stress relaxation effects have also been explained and modeled on similar bases. The knowledge of high-temperature deformation as well as its modeling in conventional or unconventional situations is becoming clearer year by year, with new contemporary and better performing high-temperature materials being constantly produced and investigated. This book includes recent contributions covering relevant topics and materials in the field in an innovative way. In the first section, contributions are related to the general description of creep deformation, damage, and ductility, while in the second section, innovative testing techniques of creep deformation are presented. The third section deals with creep in the presence of complex loading/temperature changes and environmental effects, while the last section focuses on material microstructure–creep correlations for specific material classes. The quality and potential of specific materials and microstructures, testing conditions, and modeling as addressed by specific contributions will surely inspire scientists and technicians in their own innovative approaches and studies on creep and high-temperature deformation.

Download or read book Topical Issues of Rational Use of Natural Resources written by Vladimir Litvinenko and published by CRC Press. This book was released on 2018-10-16 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topical Issues of Rational Use of Natural Resources contains the contributions presented at International Forum-Contest of Young Researchers 2018 (St. Petersburg Mining University, Russia, 18-20 April 2018). The Forum-Contest is an excellent opportunity for young researchers to present their work to the scientific community involved in the extraction and processing of natural resources. The topics of the book include: • Prospecting and exploration of mineral deposits • Development of solid minerals deposits and safety of mining operations • Development of oil and gas fields and transportation of crude hydrocarbons • Modern technologies of construction work applied in the mineral complex • Metallurgy. Physical and chemical technologies of hydrocarbons treatment • Equipment, transport service and energy efficiency of mining enterprises • Economic tools of innovative development • Environmental protection • Geo information systems and nanotechnologies Topical Issues of Rational Use of Natural Resources collects the best reports presented at the Forum-Contest, and will be of interest to academics and professionals involved in the extraction and processing of natural resources.

Download or read book Plastic Deformation of Ceramics written by R.C. Bradt and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume, "Plastic Deformation of Ceramics," constitutes the papers of an international symposium held at Snowbird, Utah from August 7-12, 1994. It was attended by nearly 100 scientists and engineers from more than a dozen countries representing academia, national laboratories, and industry. Two previous conferences on this topic were held at The Pennsylvania State University in 1974 and 1983. Therefore, the last major international conference focusing on the deformation of ceramic materials was held more than a decade ago. Since the early 1980s, ceramic materials have progressed through an evolutionary period of development and advancement. They are now under consideration for applications in engineering structures. The contents of the previous conferences indicate that considerable effort was directed towards a basic understanding of deformation processes in covalently bonded or simple oxide ceramics. However, now, more than a decade later, the focus has completely shifted. In particular, the drive for more efficient heat engines has resulted in the development of silicon-based ceramics and composite ceramics. The discovery of high-temperature cupric oxide-based superconductors has created a plethora of interesting perovskite-Iike structured ceramics. Additionally, nanophase ceramics, ceramic thin films, and various forms of toughened ceramics have potential applications and, hence, their deformation has been investigated. Finally, new and exciting areas of research have attracted interest since 1983, including fatigue, nanoindentation techniques, and superplasticity.

Download or read book Creep Resistant Steels written by Fujio Abe and published by Elsevier. This book was released on 2008-03-14 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep-resistant steels are widely used in the petroleum, chemical and power generation industries. Creep-resistant steels must be reliable over very long periods of time at high temperatures and in severe environments. Understanding and improving long-term creep strength is essential for safe operation of plant and equipment. This book provides an authoritative summary of key research in this important area.The first part of the book describes the specifications and manufacture of creep-resistant steels. Part two covers the behaviour of creep-resistant steels and methods for strengthening them. The final group of chapters analyses applications in such areas as turbines and nuclear reactors.With its distinguished editors and international team of contributors, Creep-resistant steels is a valuable reference for the power generation, petrochemical and other industries which use high strength steels at elevated temperatures. - Describes the specifications and manufacture of creep-resistant steels - Strengthening methods are discussed in detail - Different applications are analysed including turbines and nuclear reactors

Download or read book Materials Ageing and Degradation in Light Water Reactors written by K L Murty and published by Elsevier. This book was released on 2013-02-18 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: Light water reactors (LWRs) are the predominant class of nuclear power reactors in operation today; however, ageing and degradation can influence both their performance and lifetime. Knowledge of these factors is therefore critical to safe, continuous operation. Materials ageing and degradation in light water reactors provides a comprehensive guide to prevalent deterioration mechanisms, and the approaches used to handle their effects.Part one introduces fundamental ageing issues and degradation mechanisms. Beginning with an overview of ageing and degradation issues in LWRs, the book goes on to discuss corrosion in pressurized water reactors and creep deformation of materials in LWRs. Part two then considers materials' ageing and degradation in specific LWR components. Applications of zirconium alloys in LWRs are discussed, along with the ageing of electric cables. Materials management strategies for LWRs are then the focus of part three. Materials management strategies for pressurized water reactors and VVER reactors are considered before the book concludes with a discussion of materials-related problems faced by LWR operators and corresponding research needs.With its distinguished editor and international team of expert contributors, Materials ageing and degradation in light water reactors is an authoritative review for anyone requiring an understanding of the performance and durability of this type of nuclear power plant, including plant operators and managers, nuclear metallurgists, governmental and regulatory safety bodies, and researchers, scientists and academics working in this area. - Introduces the fundamental ageing issues and degradation mechanisms associated with this class of nuclear power reactors - Considers materials ageing and degradation in specific light water reactor components, including properties, performance and inspection - Chapters also focus on material management strategies

Download or read book Encyclopedia of Continuum Mechanics written by Holm Altenbach and published by Springer. This book was released on 2020-01-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia covers the entire science of continuum mechanics including the mechanics of materials and fluids. The encyclopedia comprises mathematical definitions for continuum mechanical modeling, fundamental physical concepts, mechanical modeling methodology, numerical approaches and many fundamental applications. The modelling and analytical techniques are powerful tools in mechanical civil and areospsace engineering, plus in related fields of plasticity, viscoelasticity and rheology. Tensor-based and reference-frame-independent, continuum mechanics has recently found applications in geophysics and materials.

Download or read book Glacial Isostasy Sea Level and Mantle Rheology written by R. Sabadini and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: by K. Lambeck, R. Sabadini and E. B08Chi Viscosity is one of the important material properties of the Earth, controlling tectonic and dynamic processes such as mantle convection, isostasy, and glacial rebound. Yet it remains a poorly resolved parameter and basic questions such as whether the planet's response to loading is linear or non-linear, or what are its depth and lateral variations remain uncertain. Part of the answer to such questions lies in laboratory observations of the rheology of terrestrial materials. But the extrapolation of such measurements from the laboratory environment to the geological environment is a hazardous and vexing undertaking, for neither the time scales nor the strain rates characterizing the geological processes can be reproduced in the laboratory. General rules for this extrapolation are that if deformation is observed in the laboratory at a particular temperature, deformation in geological environments will occur at a much reduced temperature, and that if at laboratory strain rates a particular deformation mechanism dominates over all others, the relative importance of possible mechanisms may be quite different at the geologically encountered strain rates. Hence experimental results are little more than guidelines as to how the Earth may respond to forces on long time scales.