Download or read book Mechanics of Multiscale Hybrid Nanocomposites written by Farzad Ebrahimi and published by Elsevier. This book was released on 2022-01-25 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Multiscale Hybrid Nanocomposites provides a practical and application-based investigation of both static and dynamic behaviors of multiscale hybrid nanocomposites. The book outlines how to predict the mechanical behavior and material characteristics of these nanocomposites via two-step micromechanical homogenization techniques performed in an energy-based approach that is incorporated with the strain-displacement relations of shear deformable beam, plate and shell theories. The effects of using various nanofillers are detailed, providing readers with the best methods of improving nanocomposite stiffness. Both numerical (Ritz, Rayleigh-Ritz, etc.) and analytical (Navier, Galerkin, etc.) solution methods are outlined, along with examples and techniques. Demonstrates the influences of carbon nanotube agglomerates and wave phenomena on the constitutive modeling of three-phase hybrid nanocomposites Analyzes nonlinear dynamic characteristics of hybrid nanocomposite systems, as well as how to monitor the system’s stability via linearization technique Discusses the stability of linear nanocomposite systems subjected to the dispersion of elastic waves and bending loads Outlines how to design three-phase nanocomposite structures for resistance against buckling-mode failure Instructs how to derive the governing equations of continuous systems in both linear and nonlinear regimes in the framework of various types of kinematic shell and plate theories
Download or read book Wave Dispersion Characteristics of Continuous Mechanical Systems written by Farzad Ebrahimi and published by CRC Press. This book was released on 2023-12-13 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wave Dispersion Characteristics of Continuous Mechanical Systems provides a mechanical engineering-based analysis of wave dispersion response in various structures created from different materials. Looking at materials including strengthened nanocomposites, functionally graded materials, metal foams, and anisotropic materials, it uses analytical solution methods to solve typical problems in the framework of a micromechanics approach. Nanocomposites are a novel type of composite materials, fabricated by dispersing nanosized reinforcements in a matrix to combine the material properties of the matrix with the improved properties of nanosized elements. This book enables readers to learn about the theory and practical applications of this rapidly evolving field. Practically minded, the book investigates the impact of employing various nanofillers and demonstrates how this augments stiffness within the nanocomposite. Topics covered include agglomeration and waviness of nanofillers, porosity, elastic mediums, fluid flow, and the impact of the thermal environment on a propagated wave. Using mathematical formulations to solve wave dispersion characteristics of structures including beams, plates, and shells, the book obtains equations of structures using first- and higher-order shear deformation theories. This book will be of interest to professional engineers working in material and mechanical engineering, nanocomposites, nanofillers, and micromechanics. It will also be of interest to students in these fields.
Download or read book Mechanics of Auxetic Materials and Structures written by Farzad Ebrahimi and published by CRC Press. This book was released on 2024-05-02 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Auxetic Materials and Structures offers a wide range of application-based and practical considerations of smart materials and auxetic materials in engineering structures. Exploring the analytical and numerical solution procedures, the book discusses crucial characteristics of metamaterials and their response to external factors. Covering the effect of different parameters and external factors on the mechanics of auxetic materials and structures, the book considers the benefits leading to better fracture resistance, toughness, shear modulus, and acoustic response. The book serves as a reference for senior undergraduate and graduate students studying civil engineering, mechanical engineering, and materials science and taking courses in smart materials, metamaterials, and mechanics of materials.
Download or read book Hybrid Nanocomposites for Nanotechnology written by Lhadi Merhari and published by Springer Science & Business Media. This book was released on 2009-03-03 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the latest advances in polymer-inorganic nanocomposites, with particular focus on high-added-value applications in fields including electronics, optics, magnetism and biotechnology. The unique focus of this book is on electronic, optical, magnetic and biomedical applications of hybrid nanocomposites. Coverage includes: Synthesis methods and issues and production scale-up; Characterization methods; Electronic applications; Optical applications and Photonics; Magnetic applications; and Biomedical applications. The book offers readers a solid grasp of the state of the art, and of current challenges in non-traditional applications of hybrid nanocomposites.
Download or read book Characterization of Nanocomposites written by Frank Abdi and published by CRC Press. This book was released on 2017-03-31 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: These days, advanced multiscale hybrid materials are being produced in the industry, studied by universities, and used in several applications. Unlike for macromaterials, it is difficult to obtain the physical, mechanical, electrical, and thermal properties of nanomaterials because of the scale. Designers, however, must have knowledge of these properties to perform any finite element analysis or durability and damage tolerance analysis. This is the book that brings this knowledge within easy reach. What makes the book unique is the fact that its approach that combines multiscale multiphysics and statistical analysis with multiscale progressive failure analysis. The combination gives a very powerful tool for minimizing tests, improving accuracy, and understanding the effect of the statistical nature of materials, in addition to the mechanics of advanced multiscale materials, all the way to failure. The book focuses on obtaining valid mechanical properties of nanocomposite materials by accurate prediction and observed physical tests, as well as by evaluation of test anomalies of advanced multiscale nanocomposites containing nanoparticles of different shapes, such as chopped fiber, spherical, and platelet, in polymeric, ceramic, and metallic materials. The prediction capability covers delamination, fracture toughness, impact resistance, conductivity, and fire resistance of nanocomposites. The methodology employs a high-fidelity procedure backed with comparison of predictions with test data for various types of static, fatigue, dynamic, and crack growth problems. Using the proposed approach, a good correlation between the simulation and experimental data is established.
Download or read book Characterization of Nanocomposites written by Frank Abdi and published by . This book was released on 2017 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: "These days, advanced multiscale hybrid materials are being produced in the industry, studied by universities, and used in several applications. Unlike for macromaterials, it is difficult to obtain the physical, mechanical, electrical, and thermal properties of nanomaterials because of the scale. Designers, however, must have knowledge of these properties to perform any finite element analysis or durability and damage tolerance analysis. This is the book that brings this knowledge within easy reach.What makes the book unique is the fact that its approach that combines multiscale multiphysics and statistical analysis with multiscale progressive failure analysis. The combination gives a very powerful tool for minimizing tests, improving accuracy, and understanding the effect of the statistical nature of materials, in addition to the mechanics of advanced multiscale materials, all the way to failure. The book focuses on obtaining valid mechanical properties of nanocomposite materials by accurate prediction and observed physical tests, as well as by evaluation of test anomalies of advanced multiscale nanocomposites containing nanoparticles of different shapes, such as chopped fiber, spherical, and platelet, in polymeric, ceramic, and metallic materials. The prediction capability covers delamination, fracture toughness, impact resistance, conductivity, and fire resistance of nanocomposites. The methodology employs a high-fidelity procedure backed with comparison of predictions with test data for various types of static, fatigue, dynamic, and crack growth problems. Using the proposed approach, a good correlation between the simulation and experimental data is established."--Provided by publisher.
Download or read book Experimental and Applied Mechanics Volume 6 written by Tom Proulx and published by Springer Science & Business Media. This book was released on 2011-05-27 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental and Applied Mechanics represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011. The full set of proceedings also includes volumes on Dynamic Behavior of Materials, Mechanics of Biological Systems and Materials, Challenges in Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, MEMS and Nanotechnology; Optical Measurements, Modeling and, Metrology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.
Download or read book Mechanics of Nanocomposites written by Farzad Ebrahimi and published by CRC Press. This book was released on 2020-05-21 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizing the static and dynamic behaviors of nanocomposite single- or multilayered structures in the framework of continuum mechanics-based approaches, Mechanics of Nanocomposites: Homogenization and Analysis investigates mechanical behaviors of polymeric matrices strengthened via various nanofillers and nanoparticles such as carbon nanotubes (CNTs), graphene platelets (GPLs), and graphene oxides (GOs). It covers equivalent properties of nanocomposites that are obtained via homogenization techniques based on micromechanics approaches. In addition, this comprehensive book: Discusses the effects of various nanofillers and identifies the amount of the improvement that can be induced in the stiffness of the polymeric nanocomposites by adding a finite content of the aforementioned nanosize reinforcements Magnifies the effect of the number of the stacking plies of the multi-layered nanocomposite structures on both static and dynamic responses of the continuous systems manufactured from such sandwich structures Presents a wide range of analytical and numerical solution procedures Investigates the effects of porosity along with mechanical characteristics of nanocomposites Considers the time-dependency of the material properties of the viscoelastic polymeric nanocomposite structures Performs analyses using an energy-based approach incorporated with the strain-displacement relations of both classical and higher-order shear deformable beam, plate, or shell theorems Aimed at researchers, academics, and professionals working across mechanical, materials, and other areas of engineering, this work ensures that readers are equipped to fully understand the mechanical characteristics of nanocomposite structures so that they can design, develop, and apply these materials effectively.
Download or read book Experimental Mechanics of Composite Hybrid and Multifunctional Materials Volume 6 written by G P Tandon and published by Springer Science & Business Media. This book was released on 2013-08-28 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental Mechanics of Composite, Hybrid, and Multifunctional Materials: Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics, the sixth volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Characterization of Energy Storage Materials Microvascular & Natural Composites Nanocomposites for Multifunctional Performance Composite/Hybrid Characterization Using Digital Image Correlation Failure Behavior of Polymer Matrix Composites Non-Destructive Testing of Composites Composite Test Methods Joints/Bonded Composites
Download or read book Hybrid Nanomaterials written by Suneel Kumar Srivastava and published by John Wiley & Sons. This book was released on 2017-06-15 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book highlights applications of hybrid materials in solar energy systems, lithium ion batteries, electromagnetic shielding, sensing of pollutants and water purification. A hybrid material is defined as a material composed of an intimate mixture of inorganic components, organic components, or both types of components. In the last few years, a tremendous amount of attention has been given towards the development of materials for efficient energy harvesting; nanostructured hybrid materials have also been gaining significant advances to provide pollutant free drinking water, sensing of environmental pollutants, energy storage and conservation. Separately, intensive work on high performing polymer nanocomposites for applications in the automotive, aerospace and construction industries has been carried out, but the aggregation of many fillers, such as clay, LDH, CNT, graphene, represented a major barrier in their development. Only very recently has this problem been overcome by fabrication and applications of 3D hybrid nanomaterials as nanofillers in a variety of polymers. This book, Hybrid Nanomaterials, examines all the recent developments in the research and specially covers the following subjects: 3D hybrid nanomaterials nanofillers Hybrid nanostructured materials for development of advanced lithium batteries High performing hybrid nanomaterials for supercapacitor applications Nano-hybrid materials in the development of solar energy applications Application of hybrid nanomaterials in water purification Advanced nanostructured materials in electromagnetic shielding of radiations Preparation, properties and application of hybrid nanomaterials in sensing of environmental pollutants Development of hybrid fillers/polymer nanocomposites for electronic applications High performance hybrid filler reinforced epoxy nanocomposites State-of-the-art overview of elastomer/hybrid filler nanocomposites
Download or read book Hybrid Nanofillers for Polymer Reinforcement written by Sabu Thomas and published by Elsevier. This book was released on 2024-08-12 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Nanofillers for Polymer Reinforcement: Synthesis, Assembly, Characterization, and Applications provides a targeted approach to hybrid nanostructures, enabling the development of these advanced nanomaterials for specific applications. The book begins by reviewing the status of hybrid nanostructures, their current applications, and future opportunities. This is followed by chapters examining synthesis and characterization techniques, as well as interactions within nanohybrid systems. The second part of the book provides detailed chapters each highlighting a particular application area and discussing the preparation of various hybrid nano systems that can potentially be utilized in that area. The last chapters turn towards notable state-of-the-art hybrid nanomaterials and their properties and applications. This book is a valuable resource for researchers and advanced students across polymer science, nanotechnology, rubber technology, chemistry, sustainable materials, and materials engineering, as well as scientists, engineers, and R&D professionals with an interest in hybrid nanostructures or advanced nanomaterials for a industrial application. Provides synthesis methods, characterization techniques, and structure-property analysis for hybrid nanostructures Offers in-depth coverage that focuses on specific applications across energy storage, environment, automotive, aerospace, construction and biomedicine Includes the latest novel areas, such as elastomeric hybrid nano systems, hybrid ceramic polymer nanocomposites, and self-assembled structures
Download or read book Multi Scale Continuum Mechanics Modelling of Fibre Reinforced Polymer Composites written by Wim Van Paepegem and published by Woodhead Publishing. This book was released on 2020-11-25 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multi-scale modelling of composites is a very relevant topic in composites science. This is illustrated by the numerous sessions in the recent European and International Conferences on Composite Materials, but also by the fast developments in multi-scale modelling software tools, developed by large industrial players such as Siemens (Virtual Material Characterization toolkit and MultiMechanics virtual testing software), MSC/e-Xstream (Digimat software), Simulia (micromechanics plug-in in Abaqus), HyperSizer (Multi-scale design of composites), Altair (Altair Multiscale Designer) This book is intended to be an ideal reference on the latest advances in multi-scale modelling of fibre-reinforced polymer composites, that is accessible for both (young) researchers and end users of modelling software. We target three main groups: This book aims at a complete introduction and overview of the state-of-the-art in multi-scale modelling of composites in three axes: • ranging from prediction of homogenized elastic properties to nonlinear material behaviour • ranging from geometrical models for random packing of unidirectional fibres over meso-scale geometries for textile composites to orientation tensors for short fibre composites • ranging from damage modelling of unidirectionally reinforced composites over textile composites to short fibre-reinforced composites The book covers the three most important scales in multi-scale modelling of composites: (i) micro-scale, (ii) meso-scale and (iii) macro-scale. The nano-scale and related atomistic and molecular modelling approaches are deliberately excluded, since the book wants to focus on continuum mechanics and there are already a lot of dedicated books about polymer nanocomposites. A strong focus is put on physics-based damage modelling, in the sense that the chapters devote attention to modelling the different damage mechanisms (matrix cracking, fibre/matrix debonding, delamination, fibre fracture,...) in such a way that the underlying physics of the initiation and growth of these damage modes is respected. The book also gives room to not only discuss the finite element based approaches for multi-scale modelling, but also much faster methods that are popular in industrial software, such as Mean Field Homogenization methods (based on Mori-Tanaka and Eshelby solutions) and variational methods (shear lag theory and more advanced theories). Since the book targets a wide audience, the focus is put on the most common numerical approaches that are used in multi-scale modelling. Very specialized numerical methods like peridynamics modelling, Material Point Method, eXtended Finite Element Method (XFEM), isogeometric analysis, SPH (Smoothed Particle Hydrodynamics),... are excluded. Outline of the book The book is divided in three large parts, well balanced with each a similar number of chapters:
Download or read book All carbon Composites and Hybrids written by Dr Oxana V. Kharissova and published by Royal Society of Chemistry. This book was released on 2021-05-07 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: All-carbon composites are carbon materials reinforced with other carbon materials, typically nanostructures such as carbon nanofibers or nanotubes. There are a large number of all-carbon materials, many of which demonstrate unique and useful sets of properties. Combining and hybridising different carbon materials and nanomaterials together also opens up a number of possibilities to fine-tune the materials for desirable combinations of these properties. All-carbon Composites and Hybrids provides a broad overview of these materials including discussions of synthesis, characterisation and the applications of a wide variety of all-carbon composite materials. This will be a useful volume for any researchers interested in carbon and nanotechnology.
Download or read book Tribology of Polymers Polymer Composites and Polymer Nanocomposites written by Soney C. George and published by Elsevier. This book was released on 2022-10-08 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology of Polymers, Polymer Composites, and Polymer Nanocomposites combines fundamental knowledge with the latest findings in the area of polymer tribology. From testing of property-related mechanisms to prediction of wear using artificial neural networks, the book explores all relevant polymer types, including elastomers, epoxy-based, nylon, and more while also discussing their different types of reinforcement, such as particulates, short fibers, natural fibers, and beyond. New developments in sustainable materials, environmental effects, nanoscaled fillers, and self-lubrication are each discussed, as are applications of these materials, guidelines for when to use certain polymer systems, and functional groups of polymers. Experimental methods and modeling and prediction techniques are also outlined. The tribology of graphene-based, biodegradable, hybrid nanofiller/polymer nanocomposites and other types of polymers is discussed at length. Synthesizes the latest cutting-edge research in the tribological behaviors and applications of polymeric materials Covers all relevant polymer types and concepts, including elastomers and natural fibers, different types of reinforcement materials, sustainable materials, interfacial modifiers and the environmental effects of self-lubrication Outlines modeling techniques and how filler-matrix pairings and other approaches can control wear mechanisms
Download or read book Advanced Composite Materials and Structures written by Mohamed Thariq Hameed Sultan and published by CRC Press. This book was released on 2022-08-31 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the gap between theoretical concepts and their implementations, especially for the high-performance structures/components related to advanced composite materials. This work focuses on the prediction of various structural responses such as deformations, natural frequencies etc. of advanced composites under complex environments and/or loading conditions. In addition, it discusses micro-mechanical material modeling of various advanced composite materials that involve different structures ranging from basic to advanced, such as beams, flat and curved panels, shells, skewed, corrugated, and other materials, as well as various solution techniques via analytical, semi-analytical, and numerical approaches. This book: Covers micro-mechanical material modeling of advanced composite materials Describes constitutive models of different composite materials and kinematic models of different structural configuration Discusses pertinent analytical, semi-analytical, and numerical techniques Focusses on structural responses relating to deformations, natural frequencies, and critical loads under complex environments Presents actual demonstrations of theoretical concepts as applied to real examples using Ansys APDL scripts This book is aimed at researchers, professionals, and graduate students in mechanical engineering, material science, material engineering, structural engineering, aerospace engineering, and composite materials.
Download or read book Processing of Polymer based Nanocomposites written by Suprakas Sinha Ray and published by Springer. This book was released on 2018-09-15 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Processing of polymer nanocomposites usually requires special attention since the resultant structure—micro- and nano-level, is directly influenced by among other factors, polymer/nano-additive chemistry and the processing strategy. This book consolidates knowledge, from fundamental to product development, on polymer nanocomposites processing with special emphasis on the processing-structure-property-performance relationships in a wide range of polymer nanocomposites. Furthermore, this book focuses on emerging processing technologies such as electrospinning, which has very exciting applications ranging from medical to filtration. Additionally, the important role played by the nanoparticles in polymer blends structures has been illustrated in the current book, with special focus on fundamental aspects and properties of nanoparticles migration and interface crossing in immiscible polymer blend nanocomposites. This book focuses heavily on the processing technologies and strategies and extensively addresses the processing-structure-property-performance relationships in a wide range of polymer nanocomposites, such as commodity polymers (chapter 1), engineering polymers (chapter 2), elastomers (chapter 3), thermosets (chapter 4), biopolymers (chapter 5), polymer blends (chapter 6), and electrospun polymer (chapter 7). The important role played by nanoparticles in polymer blends structures in particular is illustrated. The book is useful to undergraduate and postgraduate students (polymer engineering, materials science & engineering, chemical & process engineering), as well as research & development personnel, engineers, and material scientists.
Download or read book Advances in Engineering Materials Structures and Systems Innovations Mechanics and Applications written by Alphose Zingoni and published by CRC Press. This book was released on 2019-08-21 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications comprises 411 papers that were presented at SEMC 2019, the Seventh International Conference on Structural Engineering, Mechanics and Computation, held in Cape Town, South Africa, from 2 to 4 September 2019. The subject matter reflects the broad scope of SEMC conferences, and covers a wide variety of engineering materials (both traditional and innovative) and many types of structures. The many topics featured in these Proceedings can be classified into six broad categories that deal with: (i) the mechanics of materials and fluids (elasticity, plasticity, flow through porous media, fluid dynamics, fracture, fatigue, damage, delamination, corrosion, bond, creep, shrinkage, etc); (ii) the mechanics of structures and systems (structural dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) the numerical modelling and experimental testing of materials and structures (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) innovations and special structures (nanostructures, adaptive structures, smart structures, composite structures, bio-inspired structures, shell structures, membranes, space structures, lightweight structures, long-span structures, tall buildings, wind turbines, etc); (v) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber, glass); (vi) the process of structural engineering (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, testing, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). The SEMC 2019 Proceedings will be of interest to civil, structural, mechanical, marine and aerospace engineers. Researchers, developers, practitioners and academics in these disciplines will find them useful. Two versions of the papers are available. Short versions, intended to be concise but self-contained summaries of the full papers, are in this printed book. The full versions of the papers are in the e-book.