Download or read book Mechanics of Fibrous Composites written by M.H. Datoo and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fibre-reinforced plastic (FRP) composite materials are basically of two types. The first type is short fibres reinforced in a plastic matrix, and the other type continuous (long) fibres reinforced in a plastic matrix. The exact distinction between a short and a continuous fibre is discussed in Chapter 1. Continuous fibre-reinforced composite materials are referred to by many labels: FRP composites, advanced composites, fibrous composites, composite materials or simply composites. These terms are now generally accepted to mean the same type of material, namely, continuous fibre reinforced in plastic. In this book, the term fibrous composites is used to define a continuous fibre reinforced in plastic. Fibrous composites are presently in use for a variety of structural applica tions, and may offer an alternative to conventional metallic materials. The behaviour of fibrous composites subjected to a loading condition is very different from that of a metallic isotropic material. Therefore, 'new' analytical and testing methods are required to analyse a structural element and sections made from layered fibrous composites. There are a number of books written on the subject of composite materials. All of these are excellent in their content and achieve the authors' objectives.

Download or read book Mechanics of Fibrous Composites written by Carl T. Herakovich and published by Wiley. This book was released on 1997-12-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive coverage of micro and macro mechanics of composite materials. * Case studies on designing composite materials and laminates. * Uses both SI and U.S. Customary units throughout. * This is the only book that covers laminated tubes and damage mechanics and the only one that presents an extensive array of actual experimental results for the nonlinear, inelastic response of polymeric and metallic matrix composites.

Download or read book Mechanics of Fibrous Composites written by Mahmood Husein Datoo and published by . This book was released on 1991 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fibrous Composites in Structural Design written by Edward M. Lenoe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fourth Conference on Fibrous Composites in Structural Design was a successor to the First-to-Third Conferences on Fibrous Composites in Flight Vehicle Design sponsored by the Air Force (First and Second Conferences, September 1973 and May 1974) and by NASA (Third Conference, November 1975) which were aimed at focusing national attention on flight vehicle applications of a new class of fiber reinforced materials, the advanced com posites, which afforded weight savings and other advantages which had not been previously available. The Fourth Conference, held at San Diego, California, 14-17 November 1978, was the fi rst of these conferences to be jointly sponsored by the Army, Navy and Ai r Force together with NASA, as well as being the first to give attention to non-aerospace applications of fiber reinforced composites. While the design technology for aerospace applications has reached a state of relative maturity, other areas of application such as mi litary bridging, flywheel energy storage systems, ship and surface vessel components and ground vehicle components are in an early stage of development, and it was an important objective to pinpoint where careful attention to structural design was needed in such applications to achfeve maximum structural performance payoff together with a high level of reliability and attractive economics.

Download or read book Mechanics of Curved Composites written by Surkay Akbarov and published by Springer Science & Business Media. This book was released on 2001-11-30 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the frrst to focus on mechanical aspects of fibrous and layered composite material with curved structure. By mechanical aspects we mean statics, vibration, stability loss, elastic and fracture problems. By curved structures we mean that the reinforcing layers or fibres are not straight: they have some initial curvature, bending or distortion. This curvature may occur as a result of design, or as a consequence of some technological process. During the last two decades, we and our students have investigated problems relating to curved composites intensively. These investigations have allowed us to study stresses and strains in regions of a composite which are small compared to the curvature wavelength. These new, accurate, techniques were developed in the framework of continuum theories for piecewise homogeneous bodies. We use the exact equations of elasticity or viscoelasticity for anisotropic bodies, and consider linear and non-linear problems in the framework of this continuum theory as well as in the framework of the piecewise homogeneous model. For the latter the method of solution of related problems is proposed. We have focussed our attention on self-balanced stresses which arise from the curvature, but have provided sufficient information for the study of other effects. We assume that the reader is familiar with the theory of elasticity for anisotropic bodies, with partial differential equations and integral transformations, and also with the Finite Element Method.

Download or read book Stress Analysis of Fiber reinforced Composite Materials written by M. W. Hyer and published by DEStech Publications, Inc. This book was released on 2009 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and improved, Stress Analysis of Fiber-Reinforced Composite Materials, Hyer's work remains the definitive introduction to the use of mechanics to understand stresses in composites caused by deformations, loading, and temperature changes. In contrast to a materials science approach, Hyer emphasizes the micromechanics of stress and deformation for composite material analysis. The book provides invaluable analytic tools for students and engineers seeking to understand composite properties and failure limits. A key feature is a series of analytic problems continuing throughout the text, starting from relatively simple problems, which are built up step-by-step with accompanying calculations. The problem series uses the same material properties, so the impact of the elastic and thermal expansion properties for a single-layer of FR material on the stress, strains, elastic properties, thermal expansion and failure stress of cross-ply and angle-ply symmetric and unsymmetric laminates can be evaluated. The book shows how thermally induced stresses and strains due to curing, add to or subtract from those due to applied loads.Another important element, and one unique to this book, is an emphasis on the difference between specifying the applied loads, i.e., force and moment results, often the case in practice, versus specifying strains and curvatures and determining the subsequent stresses and force and moment results. This represents a fundamental distinction in solid mechanics.

Download or read book Advanced Fibrous Composite Materials for Ballistic Protection written by Xiaogang Chen and published by Woodhead Publishing. This book was released on 2016-01-21 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Fibrous Composite Materials for Ballistic Protection provides the latest information on ballistic protection, a topic that remains an important issue in modern times due to ever increasing threats coming from regional conflicts, terrorism, and anti-social behavior. The basic requirements for ballistic protection equipment are first and foremost, the prevention of a projectile from perforating, the reduction of blunt trauma to the human body caused by ballistic impact, the necessity that they are thermal and provide moisture comfort, and that they are lightweight and flexible to guarantee wearer's mobility. The main aim of this book is to present some of the most recent developments in the design and engineering of woven fabrics and their use as layering materials to form composite structures for ballistic personal protection. Chapter topics include High Performance Ballistic Fibres, Ultra-High Molecular Weight Polyethylene (UHMWPE), Ballistic Damage of Hybrid Composite Materials, Analysis of Ballistic Fabrics and Layered Composite Materials, and Multi-Scale Modeling of Polymeric Composite Materials for Ballistic Protection. - Contributions from leading experts in the field - Cutting edge developments on the engineering of ballistic materials - Comprehensive analysis of the development and uses of advanced fibrous composite materials

Download or read book Biology of Fibrous Composites written by Anthony Charles Neville and published by Cambridge University Press. This book was released on 1993 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, by a leading thinker with 30 years experience in the field, is the first devoted to fibrous composites in biology. It tackles a major unsolved problem in developmental biology - how does chemistry create architecture outside cells? Fibrous composites occur in all skeletal systems including plant cell walls, insect cuticles, moth eggshells, bone and cornea. They function like man-made fibreglass, with fibres set in a matrix. The fibrous molecules are long, extracellular and water-insoluble and to be effective they must be orientated strategically. The underlying hypothesis of this book is that the fibres are orientated by self-assembly just outside the cells during a mobile liquid crystalline phase prior to stabilization. The commonest orientations of the fibres are plywood laminates (orthogonal and helicoidal), and as parallel fibres. These may be imitated in vitro by liquid crystalline chemicals. The book takes an interdisciplinary approach and will be relevant to biologists, biochemists, biophysicists, material scientists and to liquid crystals chemists.

Download or read book Mechanics of Composite Materials with MATLAB written by George Z Voyiadjis and published by Springer Science & Business Media. This book was released on 2005-10-28 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a book for people who love mechanics of composite materials and ? MATLAB . We will use the popular computer package MATLAB as a matrix calculator for doing the numerical calculations needed in mechanics of c- posite materials. In particular, the steps of the mechanical calculations will be emphasized in this book. The reader will not ?nd ready-made MATLAB programs for use as black boxes. Instead step-by-step solutions of composite material mechanics problems are examined in detail using MATLAB. All the problems in the book assume linear elastic behavior in structural mechanics. The emphasis is not on mass computations or programming, but rather on learning the composite material mechanics computations and understanding of the underlying concepts. The basic aspects of the mechanics of ?ber-reinforced composite materials are covered in this book. This includes lamina analysis in both the local and global coordinate systems, laminate analysis, and failure theories of a lamina.

Download or read book Mechanics of Composite Materials and Structures written by Carlos A. Mota Soares and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compact presentation of the foundations, current state of the art, recent developments and research directions of all essential techniques related to the mechanics of composite materials and structures. Special emphasis is placed on classic and recently developed theories of composite laminated beams, plates and shells, micromechanics, impact and damage analysis, mechanics of textile structural composites, high strain rate testing and non-destructive testing of composite materials and structures. Topics of growing importance are addressed, such as: numerical methods and optimisation, identification and damage monitoring. The latest results are presented on the art of modelling smart composites, optimal design with advanced materials, and industrial applications. Each section of the book is written by internationally recognised experts who have dedicated most of their research work to a particular field. Readership: Postgraduate students, researchers and engineers in the field of composites. Undergraduate students will benefit from the treatment of the foundations of the mechanics of composite materials and structures.

Download or read book Fibrous and Composite Materials for Civil Engineering Applications written by R Fangueiro and published by Elsevier. This book was released on 2011-04-19 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of fibrous materials in civil engineering, both as structural reinforcement and in non-structural applications such as geotextiles, is an important and interesting development. Fibrous and composite materials for civil engineering applications analyses the types and properties of fibrous textile and structures and their applications in reinforcement and civil engineering.Part one introduces different types of fibrous textiles and structures. Chapters cover the properties of natural and man-made fibres and of yarns, as well as an overview of textile structures. Part two focuses on fibrous material use in concrete reinforcement, with chapters on the properties and applications of steel fibre reinforced concrete, natural fibre reinforced concrete and the role of fibre reinforcement in mitigating shrinkage cracks. In part three, the applications of fibrous material-based composites in civil engineering are covered. Chapters concentrate on production techniques and applications such as reinforcement of internal structures, structural health monitoring and textile materials in architectural membranes.With its distinguished editor and international team of contributors, Fibrous and composite materials for civil engineering applications is a standard reference for fabric and composite manufacturers, civil engineers and professionals, as well as academics with a research interest in this field. - Explores the development of fibrous materials in civil engineering, both as structural reinforcement and in non-structural applications such as geotextiles - Key topics include short fibre reinforced concrete, natural fibre reinforced concrete and high performance fibre reinforced cementitious composites - A standard reference for fabric and composite manufacturers, civil engineers and professionals, as well as academics with a research interest in this field

Download or read book Mechanics of Fibrous Materials and Applications written by Catalin Picu and published by Springer. This book was released on 2019-07-31 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book explores the state of the art in the mechanics of fibrous media, providing an overview of the theoretical, modelling and practical aspects of designing and working with these materials. It also describes the advanced methods needed to handle their specific features, including the mechanics of generalized continua, dedicated homogenization methods and computational techniques, and presents applications of fibrous media to diverse fields and over a broad spectrum of scales, ranging from aeronautics to biomechanics.

Download or read book Micromechanics of Composites written by Volodymyr Kushch and published by Butterworth-Heinemann. This book was released on 2013-05-13 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromechanics of Composites: Multipole Expansion Approach is the first book to introduce micromechanics researchers to a more efficient and accurate alternative to computational micromechanics, which requires heavy computational effort and the need to extract meaningful data from a multitude of numbers produced by finite element software code. In this book Dr. Kushch demonstrates the development of the multipole expansion method, including recent new results in the theory of special functions and rigorous convergence proof of the obtained series solutions. The complete analytical solutions and accurate numerical data contained in the book have been obtained in a unified manner for a number of the multiple inclusion models of finite, semi- and infinite heterogeneous solids. Contemporary topics of micromechanics covered in the book include composites with imperfect and partially debonded interface, nanocomposites, cracked solids, statistics of the local fields, and brittle strength of disordered composites. - Contains detailed analytical and numerical analyses of a variety of micromechanical multiple inclusion models, providing clear insight into the physical nature of the problems under study - Provides researchers with a reliable theoretical framework for developing the micromechanical theories of a composite's strength, brittle/fatigue damage development and other properties - Includes a large amount of highly accurate numerical data and plots for a variety of model problems, serving as a benchmark for testing the applicability of existing approximate models and accuracy of numerical solutions

Download or read book Mechanical Properties of Fibrous Composites written by B. Walter Rosen and published by . This book was released on 1964 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Solutions Manual to Accompany Mechanics of Fibrous Composites written by Herakovich and published by . This book was released on 1998-02-01 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanics of Composites written by Ivan Filippovich Obrazt︠s︡ov and published by . This book was released on 1982 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Mechanics of Composite Materials written by Valery V. Vasiliev and published by Elsevier. This book was released on 2007-05-16 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials have been representing most significant breakthroughs in various industrial applications, particularly in aerospace structures, during the past thirty five years. The primary goal of Advanced Mechanics of Composite Materials is the combined presentation of advanced mechanics, manufacturing technology, and analysis of composite materials. This approach lets the engineer take into account the essential mechanical properties of the material itself and special features of practical implementation, including manufacturing technology, experimental results, and design characteristics. Giving complete coverage of the topic: from basics and fundamentals to the advanced analysis including practical design and engineering applications. At the same time including a detailed and comprehensive coverage of the contemporary theoretical models at the micro- and macro- levels of material structure, practical methods and approaches, experimental results, and optimisation of composite material properties and component performance. The authors present the results of more than 30 year practical experience in the field of design and analysis of composite materials and structures. * Eight chapters progressively covering all structural levels of composite materials from their components through elementary plies and layers to laminates* Detailed presentation of advanced mechanics of composite materials * Emphasis on nonlinear material models (elasticity, plasticity, creep) and structural nonlinearity