Download or read book Mechanics Mechatronics Intelligent System and Information Technology written by Jun Wang and published by Trans Tech Publications Ltd. This book was released on 2014-08-11 with total page 1094 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2014 International Conference on Applied Mechanics, Mechatronics and Intelligent System (AMMIS 2014), April 18-20, 2014, Changsha, China. The 183 papers are grouped as follows: Chapter 1: Applied and Computational Mechanics, Chapter 2: Research and Design in Mechanical Engineering, Chapter 3: Technology and Method for Measurement, Test, Detection and Monitoring, Chapter 4: Intelligent Systems, Processing of Signal and Data, Chapter 5: Control and Automation, Chapter 6: Applied Information Technology, Chapter 7: Communication, Network Engineering and Navigation, Chapter 8: Material Science and Material Processing Technology, Chapter 9: Engineering Management
Download or read book Mechatronics and Intelligent Systems for Off road Vehicles written by Francisco Rovira Más and published by Springer Science & Business Media. This book was released on 2010-11-30 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid developments in electronics over the past two decades have induced a move from purely mechanical vehicles to mechatronics design. Recent advances in computing, sensors, and information technology are pushing mobile equipment design to incorporate higher levels of automation under the novel concept of intelligent vehicles. Mechatronics and Intelligent Systems for Off-road Vehicles introduces this concept, and provides an overview of recent applications and future approaches within this field. Several case studies present real examples of vehicles designed to navigate in off-road environments typically encountered by agriculture, forestry, and construction machines. The examples analyzed describe and illustrate key features for agricultural robotics, such as automatic steering, safeguarding, mapping, and precision agriculture applications. The eight chapters include numerous figures, each designed to improve the reader’s comprehension of subjects such as: • automatic steering systems; • navigation systems; • vehicle architecture; • image processing and vision; and • three-dimensional perception and localization. Mechatronics and Intelligent Systems for Off-road Vehicles will be of great interest to professional engineers and researchers in vehicle automation, robotics, and the application of artificial intelligence to mobile equipment; as well as to graduate students of mechanical, electrical, and agricultural engineering.
Download or read book Applied Mechanics Mechatronics And Intelligent Systems Proceedings Of The 2015 International Conference Ammis2015 written by Shihong Qin and published by World Scientific. This book was released on 2015-12-08 with total page 962 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of one hundred and twenty-five selected papers presented at the 2015 International Conference on Applied Mechanics, Mechatronics and Intelligent Systems (AMMIS2015), which was held in Nanjing, China during June 19-20, 2015.AMMIS2015 focuses on seven main areas, namely, applied mechanics, control and automation, intelligent systems, computer technology, electronics engineering, electrical engineering, and materials science and technology. Experts in this field from all over the world contributed to the collection of research results and development activities.AMMIS2015 provides an excellent international exchange platform for researchers to share their development works and results in these areas. All papers selected for this proceeding were subjected to a rigorous peer-review process.
Download or read book Intelligent Mechatronic Systems written by Rochdi Merzouki and published by Springer Science & Business Media. This book was released on 2012-11-27 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acting as a support resource for practitioners and professionals looking to advance their understanding of complex mechatronic systems, Intelligent Mechatronic Systems explains their design and recent developments from first principles to practical applications. Detailed descriptions of the mathematical models of complex mechatronic systems, developed from fundamental physical relationships, are built on to develop innovative solutions with particular emphasis on physical model-based control strategies. Following a concurrent engineering approach, supported by industrial case studies, and drawing on the practical experience of the authors, Intelligent Mechatronic Systems covers range of topic and includes: An explanation of a common graphical tool for integrated design and its uses from modeling and simulation to the control synthesis Introductions to key concepts such as different means of achieving fault tolerance, robust overwhelming control and force and impedance control Dedicated chapters for advanced topics such as multibody dynamics and micro-electromechanical systems, vehicle mechatronic systems, robot kinematics and dynamics, space robotics and intelligent transportation systems Detailed discussion of cooperative environments and reconfigurable systems Intelligent Mechatronic Systems provides control, electrical and mechanical engineers and researchers in industrial automation with a means to design practical, functional and safe intelligent systems.
Download or read book Applied Mechanics Mechatronics and Intelligent Systems Proceedings of the 2015 International Conference ammis2015 written by Shihong Qin and published by World Scientific. This book was released on 2015-12-08 with total page 962 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of one hundred and twenty-five selected papers presented at the 2015 International Conference on Applied Mechanics, Mechatronics and Intelligent Systems (AMMIS2015), which was held in Nanjing, China during June 19-20, 2015.AMMIS2015 focuses on seven main areas, namely, applied mechanics, control and automation, intelligent systems, computer technology, electronics engineering, electrical engineering, and materials science and technology. Experts in this field from all over the world contributed to the collection of research results and development activities.AMMIS2015 provides an excellent international exchange platform for researchers to share their development works and results in these areas. All papers selected for this proceeding were subjected to a rigorous peer-review process.
Download or read book Advancements in Mechatronics and Intelligent Robotics written by Zhengtao Yu and published by Springer Nature. This book was released on 2021-07-23 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected papers presented at the Fourth International Conference on Mechatronics and Intelligent Robotics (ICMIR 2020), held in Kunming, China, on May 22–24, 2020. The proceedings cover new findings in the following areas of research: mechatronics, intelligent mechatronics, robotics and biomimetics; novel and unconventional mechatronic systems; modeling and control of mechatronic systems; elements, structures and mechanisms of micro- and nano-systems; sensors, wireless sensor networks and multi-sensor data fusion; biomedical and rehabilitation engineering, prosthetics and artificial organs; artificial intelligence (AI), neural networks and fuzzy logic in mechatronics and robotics; industrial automation, process control and networked control systems; telerobotics and human–computer interaction; human–robot interaction; robotics and artificial intelligence; bio-inspired robotics; control algorithms and control systems; design theories and principles; evolutional robotics; field robotics; force sensors, accelerometers and other measuring devices; healthcare robotics; kinematics and dynamics analysis; manufacturing robotics; mathematical and computational methodologies in robotics; medical robotics; parallel robots and manipulators; robotic cognition and emotion; robotic perception and decisions; sensor integration, fusion and perception; and social robotics.
Download or read book Advanced Research on Applied Mechanics Mechatronics and Intelligent System written by and published by . This book was released on 2013 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2013 International Conference on Applied Mechanics, Mechatronics and Intelligent System (AMMIS2013), April 19-21, 2013, Changsha, China. The 57 papers are grouped as follows: Chapter 1: Applied Mechanics; Chapter 2: Sensors, Measurement Technologies and Equipment; Chapter 3: Mechatronics and Automation; Chapter 4: Intelligent System and Information Processing Technology.
Download or read book Mechatronic Innovative Applications written by Rochdi Merzouki and published by Bentham Science Publishers. This book was released on 2012-08-15 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Present day mechatronic systems are designed with synergistic integration of mechanics, electronics and computer technology to produce intelligent devices for the purpose of solving real-world problems. Crucial requirements for a mechatronic system are robustness and fault tolerance, i.e. it should have the ability to process incomplete, imprecise or uncertain information. Such systems often have to work in collaborative environments while being subjected to adverse conditions yet adhering to strict safety standards. This e-book explains the fundamentals of designing such systems from the first principles and how to embed intelligence into them. Examples in this volume are not restricted to production lines, but extend to extreme safety based systems such as space and underwater robotics, autonomous transportation systems, aviation systems and medical robots. Moreover, this e-book also presents recent developments in the design of innovative and intelligent mechatronic systems, applied to robotics and transportation systems, thereby providing an authoritative support for researchers and professionals having basic knowledge in mechatronics.
Download or read book Mechatronic Systems written by Annalisa Milella and published by BoD – Books on Demand. This book was released on 2010-03-01 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics, the synergistic blend of mechanics, electronics, and computer science, has evolved over the past twenty five years, leading to a novel stage of engineering design. By integrating the best design practices with the most advanced technologies, mechatronics aims at realizing high-quality products, guaranteeing at the same time a substantial reduction of time and costs of manufacturing. Mechatronic systems are manifold and range from machine components, motion generators, and power producing machines to more complex devices, such as robotic systems and transportation vehicles. With its twenty chapters, which collect contributions from many researchers worldwide, this book provides an excellent survey of recent work in the field of mechatronics with applications in various fields, like robotics, medical and assistive technology, human-machine interaction, unmanned vehicles, manufacturing, and education. We would like to thank all the authors who have invested a great deal of time to write such interesting chapters, which we are sure will be valuable to the readers. Chapters 1 to 6 deal with applications of mechatronics for the development of robotic systems. Medical and assistive technologies and human-machine interaction systems are the topic of chapters 7 to 13.Chapters 14 and 15 concern mechatronic systems for autonomous vehicles. Chapters 16-19 deal with mechatronics in manufacturing contexts. Chapter 20 concludes the book, describing a method for the installation of mechatronics education in schools.
Download or read book Mechatronics and the Design of Intelligent Machines and Systems written by David Allan Bradley and published by CRC Press. This book was released on 2018-10-03 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics as a discipline has an ever growing impact on engineering and engineering education as a defining approach to the design, development, and operation of an increasingly wide range of engineering systems. The increasing scope and complexity of mechatronic systems means that their design and development now involve not only the technical aspects of its core disciplines, but also aspects of organization, training, and management. Mechatronics and the Design of Intelligent Machines and Systems reflects the significant areas of development in mechatronics and focuses on the higher-level approaches needed to support the design and implementation of mechatronic systems. Throughout the book, the authors emphasize the importance of systems integration. Each chapter deals with a particular aspect of the design and development process, from the specification of the system to software design and from the human-machine interface to the requirements for safe operation and effective manufacture. Notable among this text's many features is the use of a running case study-the autonomous and robotic excavator LUCIE-to illustrate points made in various chapters. This, combined with the authors' clear prose, systematic organization, and generous use of examples and illustrations provides students with a firm understanding of mechatronics as a discipline, some of the problems encountered in its various areas, and the developing techniques used to solve those problems.
Download or read book Recent Developments in Mechatronics and Intelligent Robotics written by Feng Qiao and published by Springer. This book was released on 2017-11-11 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the Proceedings of the International Conference on Mechatronics and Intelligent Robotics (ICMIR2017), held in Kunming, China, on May 20–21, 2017. The book covers a total of 172 papers, which have been divided into seven different sections: Intelligent Systems, Intelligent Sensors & Actuators, Robotics, Mechatronics, Modeling & Simulation, Automation & Control, and Robot Vision. ICMIR2017 provided a vital forum for discussing the latest and most innovative ideas from both the industrial and academic worlds, and for sharing best practices in the fields of mechanical engineering, mechatronics, automatic control, electrical engineering, finite element analysis and computational engineering. The main focus of the conference was on promoting interaction between academia and industry, allowing the free exchange of ideas and challenges faced by these two key stakeholders and encouraging future collaboration between the members of these groups. The proceedings cover new findings in the following areas of research and will offer readers valuable insights: Mechatronics Intelligent mechatronics, robotics and biomimetics; Novel and unconventional mechatronic systems; Modeling and control of mechatronics systems; Elements, structures and mechanisms of micro and nano systems; Sensors, wireless sensor networks and multi-sensor data fusion; Biomedical and rehabilitation engineering, prosthetics and artificial organs; Artificial Intelligence (AI), neural networks and fuzzy logic in mechatronics and robotics; Industrial automation, process control and networked control systems; Telerobotics, Human–Computer Interaction; and Human–Robot Interaction. Robotics Artificial Intelligence; Bio-inspired robotics; Control algorithms and control systems; Design theories and principles; Evolutional robotics; Field robotics; Force sensors, accelerometers, and other measuring devices; Healthcare robotics; Human–Robot Interaction; Kinematics and dynamics analysis; Manufacturing robotics; Mathematical and computational methodologies in robotics; Medical robotics; Parallel robots and manipulators; Robotic cognition and emotion; Robotic perception and decisions; Sensor integration, fusion, and perception; and Social robotics.
Download or read book Advanced Research on Applied Mechanics Mechatronics and Intelligent System written by Guo Jin Chen and published by Trans Tech Publications Ltd. This book was released on 2013-07-31 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2013 International Conference on Applied Mechanics, Mechatronics and Intelligent System (AMMIS2013), April 19-21, 2013, Changsha, China. The 57 papers are grouped as follows: Chapter 1: Applied Mechanics; Chapter 2: Sensors, Measurement Technologies and Equipment; Chapter 3: Mechatronics and Automation; Chapter 4: Intelligent System and Information Processing Technology.
Download or read book Mechatronic Systems written by Clarence W. de Silva and published by CRC Press. This book was released on 2007-10-17 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics has emerged as its own discipline over the past decade, yet no reference has lived up to the demands of being a working guide for designing and implementing the new generation of mechatronic systems. Uniting an international team of leading experts, Mechatronic Systems: Devices, Design, Control, Operation and Monitoring rises to the ch
Download or read book Advanced Engineering and Computational Methodologies for Intelligent Mechatronics and Robotics written by Sirouspour, Shahin and published by IGI Global. This book was released on 2013-03-31 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emergence of mechatronics has advanced the engineering disciplines, producing a plethora of useful technical systems. Advanced Engineering and Computational Methodologies for Intelligent Mechatronics and Robotics presents the latest innovations and technologies in the fields of mechatronics and robotics. These innovations are applied to a wide range of applications for robotic-assisted manufacturing, complex systems, and many more. This publication is essential to bridge the gap between theory and practice for researchers, engineers, and practitioners from academia to government.
Download or read book Interdisciplinary Mechatronics written by M. K. Habib and published by John Wiley & Sons. This book was released on 2013-05-06 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics represents a unifying interdisciplinary and intelligent engineering science paradigm that features an interdisciplinary knowledge area and interactions in terms of the ways of work and thinking, practical experiences, and theoretical knowledge. Mechatronics successfully fuses (but is not limited to) mechanics, electrical, electronics, informatics and intelligent systems, intelligent control systems and advanced modeling, intelligent and autonomous robotic systems, optics, smart materials, actuators and biomedical and biomechanics, energy and sustainable development, systems engineering, artificial intelligence, intelligent computer control, computational intelligence, precision engineering and virtual modeling into a unified framework that enhances the design of products and manufacturing processes. Interdisciplinary Mechatronics concerns mastering a multitude of disciplines, technologies, and their interaction, whereas the science of mechatronics concerns the invention and development of new theories, models, concepts and tools in response to new needs evolving from interacting scientific disciplines. The book includes two sections, the first section includes chapters introducing research advances in mechatronics engineering, and the second section includes chapters that reflects the teaching approaches (theoretical, projects, and laboratories) and curriculum development for under- and postgraduate studies. Mechatronics engineering education focuses on producing engineers who can work in a high-technology environment, emphasize real-world hands-on experience, and engage in challenging problems and complex tasks with initiative, innovation and enthusiasm. Contents: 1. Interdisciplinary Mechatronics Engineering Science and the Evolution of Human Friendly and Adaptive Mechatronics, Maki K. Habib. 2. Micro-Nanomechatronics for Biological Cell Analysis and Assembly, Toshio Fukuda, Masahiro Nakajima, Masaru Takeuchi, Tao Yue and Hirotaka Tajima. 3. Biologically Inspired CPG-Based Locomotion Control System of a Biped Robot Using Nonlinear Oscillators with Phase Resetting, Shinya Aoi. 4. Modeling a Human’s Learning Processes toward Continuous Learning Support System, Tomohiro Yamaguchi, Kouki Takemori and Keiki Takadama. 5. PWM Waveform Generation Using Pulse-Type Hardware Neural Networks, Ken Saito, Minami Takato, Yoshifumi Sekine and Fumio Uchikoba. 6. Parallel Wrists: Limb Types, Singularities and New Perspectives, Raffaele Di Gregorio. 7. A Robot-Assisted Rehabilitation System – RehabRoby, Duygun Erol Barkana and Fatih Özkul. 8. MIMO Actuator Force Control of a Parallel Robot for Ankle Rehabilitation, Andrew Mcdaid, Yun Ho Tsoi and Shengquan Xie. 9. Performance Evaluation of a Probe Climber for Maintaining Wire Rope, Akihisa Tabata, Emiko Hara and Yoshio Aoki. 10. Fundamentals on the Use of Shape Memory Alloys in Soft Robotics, Matteo Cianchetti. 11. Tuned Modified Transpose Jacobian Control of Robotic Systems, S. A. A. Moosavian and M. Karimi. 12. Derivative-Free Nonlinear Kalman Filtering for PMSG Sensorless Control, Gerasimos Rigatos, Pierluigi Siano and Nikolaos Zervos. 13. Construction and Control of Parallel Robots, Moharam Habibnejad Korayem, Soleiman Manteghi and Hami Tourajizadeh. 14. A Localization System for Mobile Robot Using Scanning Laser and Ultrasonic Measurement, Kai Liu, Hongbo Li and Zengqi Sun. 15. Building of Open-Structure Wheel-Based Mobile Robotic Platform, Aleksandar Rodic and Ivan Stojkovic. 16. Design and Physical Implementation of Holonomous Mobile Robot–Holbos, Jasmin Velagic, Admir Kaknjo, Faruk Dautovic, Muhidin Hujdur and Nedim Osmic. 17. Advanced Artificial Vision and Mobile Devices for New Applications in Learning, Entertainment and Cultural Heritage Domains, Gian Luca Foresti, Niki Martinel, Christian Micheloni and Marco Vernier. 18. Application of Stereo Vision and ARM Processor for Motion Control, Moharam Habibnejad Korayem, Michal Irani and Saeed Rafee Nekoo. 19. Mechatronics as Science and Engineering – or Both, Balan Pillai and Vesa Salminen. 20. A Mechatronic Platform for Robotic Educational Activities, Ioannis Kostavelis, Evangelos Boukas, Lazaros Nalpantidis and Antonios Gasteratos. 21. The Importance of Practical Activities in the Formation of Mechatronic Engineers, Joao Carlos M. Carvalho and Vera Lúcia D.S. Franco About the Authors Maki K. Habib is Professor of Robotics and Mechatronics in the School of Science and Engineering, at the American University in Cairo, Egypt. He has been regional editor (Africa/Middle East,) for the International Journal of Mechatronics and Manufacturing Systems (IJMMS) since 2010. He is the recipient of academic awards and has published many articles and books. J. Paulo Davim is Aggregate Professor in the Department of Mechanical Engineering at the University of Aveiro, Portugal and is Head of MACTRIB (Machining and Tribology Research Group). His main research interests include manufacturing, materials and mechanical engineering.
Download or read book Intelligent Systems in Production Engineering and Maintenance written by Anna Burduk and published by Springer. This book was released on 2018-07-31 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a collection of 103 peer-reviewed articles from the Second International Conference on Intelligent Systems in Production Engineering and Maintenance (ISPEM 2018). The conference was organized by the Faculty of Mechanical Engineering and CAMT (Centre for Advanced Manufacturing Technologies), Wrocław University of Science and Technology and was held in Wrocław (Poland) on 17–18 September 2018. The conferences topics included the possibility of using a wide range of intelligent methods in production engineering, presenting and discussing new solutions for innovative plants, research findings and case studies demonstrating advances in production and maintenance from the point of view of Industry 4.0 – particularly applications of intelligent systems, methods and tools in production engineering, maintenance, logistics, quality management, information systems and product development. The book is divided into two parts: the first includes papers related to intelligent systems in production engineering, while the second is dedicated to special sessions focusing on: 1. Computer Aided methods in Production Engineering 2. Mining 4.0 and Intelligent Mining Transportation 3. Modelling and Simulation of Production Processes 4. Multi-Faceted Modelling of Networks and Processes 5. Product Design and Product Manufacturing in Industry 4.0 This book is an excellent source of information for scientists in the field of manufacturing engineering and for top managers in production enterprises.
Download or read book Recent Developments in Mechatronics and Intelligent Robotics written by Feng Qiao and published by Springer. This book was released on 2017-11-11 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the Proceedings of the International Conference on Mechatronics and Intelligent Robotics (ICMIR2017), held in Kunming, China, on May 20–21, 2017. The book covers a total of 172 papers, which have been divided into seven different sections: Intelligent Systems, Intelligent Sensors & Actuators, Robotics, Mechatronics, Modeling & Simulation, Automation & Control, and Robot Vision. ICMIR2017 provided a vital forum for discussing the latest and most innovative ideas from both the industrial and academic worlds, and for sharing best practices in the fields of mechanical engineering, mechatronics, automatic control, electrical engineering, finite element analysis and computational engineering. The main focus of the conference was on promoting interaction between academia and industry, allowing the free exchange of ideas and challenges faced by these two key stakeholders and encouraging future collaboration between the members of these groups. The proceedings cover new findings in the following areas of research and will offer readers valuable insights: Mechatronics Intelligent mechatronics, robotics and biomimetics; Novel and unconventional mechatronic systems; Modeling and control of mechatronics systems; Elements, structures and mechanisms of micro and nano systems; Sensors, wireless sensor networks and multi-sensor data fusion; Biomedical and rehabilitation engineering, prosthetics and artificial organs; Artificial Intelligence (AI), neural networks and fuzzy logic in mechatronics and robotics; Industrial automation, process control and networked control systems; Telerobotics, Human–Computer Interaction; and Human–Robot Interaction. Robotics Artificial Intelligence; Bio-inspired robotics; Control algorithms and control systems; Design theories and principles; Evolutional robotics; Field robotics; Force sensors, accelerometers, and other measuring devices; Healthcare robotics; Human–Robot Interaction; Kinematics and dynamics analysis; Manufacturing robotics; Mathematical and computational methodologies in robotics; Medical robotics; Parallel robots and manipulators; Robotic cognition and emotion; Robotic perception and decisions; Sensor integration, fusion, and perception; and Social robotics.