Download or read book Handbook of Occupational Safety and Health written by Danuta Koradecka and published by CRC Press. This book was released on 2010-05-04 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using an interdisciplinary approach, this book presents a wide range of methods and specific criteria for assessing hazard and exposure in the workplace environment, offering ways to reduce these hazards. This text provides coverage of basic risk factors, law-based protection of labor, shaping conditions of occupational safety and ergonomics, psychophysical capabilities of humans in the working environment, and more.

Download or read book Occupational and Environmental Safety and Health III written by Pedro M. Arezes and published by Springer Nature. This book was released on 2021-11-12 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers cutting-edge research and best practices relating to occupational risk and safety management, healthcare and ergonomics. It covers strategies for different types of industry, such as construction, food, chemical and healthcare. It gives a special emphasis on challenges posed by automation, discussing solutions offered by technologies, and reporting on case studies carried out in different countries. Chapters are based on selected contributions to the 17th International Symposium on Occupational Safety and Hygiene (SHO 2021), held virtually on November 17–19, 2021, from Portugal. By reporting on different perspectives, such as the ones from managers, workers and OSH professionals, and covering timely issues, such as safety evaluation of human-robot collaboration, this book offers extensive information and a source of inspiration to OSH researchers, practitioners and organizations operating in both local and global contexts.

Download or read book Acoustics and Noise Control written by R J Peters and published by Routledge. This book was released on 2013-11-12 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acoustics and Noise Control provides a detailed and comprehensive introduction to the principles and practice of acoustics and noise control. Since the last edition was published in 1996 there have been many changes and additions to standards, laws and regulations, codes of practice relating to noise, and in noise measurement techniques and noise control technology so this new edition has been fully revised and updated throughout. The book assumes no previous knowledge of the subject and requires only a basic knowledge of mathematics and physics. There are worked examples in the text to aid understanding and a range of experiments help students use complicated apparatus. Thoroughly revised to cover the latest changes in standards, codes of practice and legislation, this new edition covers much of the Institute of Acoustics Diploma syllabus and has an increased emphasis on the legal issues relating to noise control.

Download or read book Physical Agents in the Environment and Workplace written by Gaetano Licitra and published by CRC Press. This book was released on 2018-04-17 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores environmental physical agents and their potential effect on public and occupational health. It considers the theory, current research, and applications of physical agents including noise, ionizing radiation protection and non ionizing radiation protection, and explores the monitoring, measurement, modeling and mitigation of each of these. Features: Covers all three physical agents in one comprehensive book Presents the latest results from research, as well as theory Contributed to by a panel of international experts

Download or read book Safety and Security Engineering VI written by C.A. Brebbia and published by WIT Press. This book was released on 2015-05-06 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the sixth in a series of interdisciplinary conferences on safety and security engineering. The papers from the biennial conference, first held in 2005, include the work of engineers, scientists, field researchers, managers and other specialists involved in one or more aspects of safety and security. The papers presented cover areas such as: Risk Analysis; Assessment and Management; System Safety Engineering; Incident Management; Information and Communication Security; Natural Disaster Management; Emergency Response; Critical Infrastructure Protection; Public Safety and Security; Human Factors; Transportation Safety and Security; Modelling and Experiments; Security Surveillance Systems.

Download or read book Occupational and Environmental Health written by Barry S. Levy and published by Lippincott Williams & Wilkins. This book was released on 2006 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thoroughly updated Fifth Edition is a comprehensive, practical guide to recognizing, preventing, and treating work-related and environmentally-induced injuries and diseases. Chapters by experts in medicine, industry, labor, government, safety, ergonomics, environmental health, and psychology address the full range of clinical and public health concerns. Numerous case studies, photographs, drawings, graphs, and tables help readers understand key concepts. This edition features new chapters on environmental health, including water pollution, hazardous waste, global environmental hazards, the role of nongovernmental organizations in environmental health, and responding to community environmental health concerns. Other new chapters cover conducting workplace investigations and assessing and enforcing compliance with health and safety regulations.

Download or read book Handbook of Human Factors and Ergonomics written by Gavriel Salvendy and published by John Wiley & Sons. This book was released on 2012-05-24 with total page 1754 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth edition of the Handbook of Human Factors and Ergonomics has been completely revised and updated. This includes all existing third edition chapters plus new chapters written to cover new areas. These include the following subjects: Managing low-back disorder risk in the workplace Online interactivity Neuroergonomics Office ergonomics Social networking HF&E in motor vehicle transportation User requirements Human factors and ergonomics in aviation Human factors in ambient intelligent environments As with the earlier editions, the main purpose of this handbook is to serve the needs of the human factors and ergonomics researchers, practitioners, and graduate students. Each chapter has a strong theory and scientific base, but is heavily focused on real world applications. As such, a significant number of case studies, examples, figures, and tables are included to aid in the understanding and application of the material covered.

Download or read book Advances in Physical Ergonomics and Safety written by Tareq Z. Ahram and published by CRC Press. This book was released on 2012-07-10 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on recent research, this book discusses physical ergonomics, which is concerned with human anatomical, anthropometric, physiological and biomechanical characteristics as they relate to physical activity. Topics include working postures, materials handling, repetitive movements, work-related musculoskeletal disorders, workplace layout, safety, and health.

Download or read book Managing Noise and Vibration at Work written by Tim South and published by Routledge. This book was released on 2013-05-13 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: New EU Physical Agents Directives on Noise and Vibration will be incorporated into UK law by February 2006. Explicit action levels for vibration will be introduced, while the action levels for noise will be drastically cut. In order to comply with these Directives, companies need to assess noise and vibration levels and provide necessary protection for their employees. They are also required to monitor and if necessary reduce noise and vibration risks. Managing Noise and Vibration at Work introduces noise and both hand-arm and whole-body vibration by explaining what they are and how they can affect the body, drawing out the similarities and differences between the hazards. It provides clear explanations of the requirements of the EU Directives and explains how to fulfill them. Practical information on measurement, making noise and vibration assessments, and approaches to controlling risk help the reader to understand the issues of noise and vibration exposure in the workplace. The text is supported by information and diagrams of measuring equipment, advice on how to plan a survey, worked examples of necessary calculations, and charts and diagrams that can be used in place of the calculations. Suitable hearing and vibration protection is detailed. Case studies help to set the subject in context and highlight common errors and pitfalls. The book fully covers the syllabuses of the Institute of Acoustics’ certificate courses in Workplace Noise Assessment and Management of Occupational Exposure to Hand-arm Vibration. It will also be of use to those studying for the Diploma in Acoustics and Noise Control. For those studying for the NEBOSH Diploma in Health and Safety, this book satisfies modules 1E and 2E. As the Institute of Acoustics syllabuses are based on the Health and Safety Executive's guidelines, the book will also be a useful up-to-date reference for: risk managers; Health and Safety advisors and managers; occupational hygienists; environmental health officers; and HSE inspectors, especially in the Construction, Manufacturing, Agriculture and Forestry sectors. Tim South is a Senior Lecturer in Acoustics at the School of Health and Human Sciences at Leeds Metropolitan University, and a member of the Institute of Acoustics’ Education Committee. He teaches the Institute of Acoustics courses for the Certificate of Competence in Workplace Noise Assessment, the Certificate in the Management of Occupational Exposure to Hand-arm Vibration, and also the Institute’s Diploma in Acoustics and Noise Control. He has extensive consultancy experience in workplace noise assessments, hand-arm vibration and whole-body vibration exposure assessments.

Download or read book Occupational Safety and Hygiene VI written by Pedro M. Arezes and published by CRC Press. This book was released on 2018-03-14 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: Occupational Safety and Hygiene VI collects recent papers of selected authors from 21 countries in the domain of occupational safety and hygiene (OSH). The contributions cover a wide range of topics, including: - Occupational safety - Risk assessment - Safety management - Ergonomics - Management systems - Environmental ergonomics - Physical environment - Construction safety, and - Human factors Occupational Safety and Hygiene VI represents the state-of-the-art on the above mentioned domains, and is based on research carried out at universities and other research institutions. Some contributions focus more on practical case studies developed by OSH practitioners within their own companies. Hence, the book provides practical tools and approaches currently used by OHS practitioners in a global context.

Download or read book Handbook of Noise and Vibration Control written by Malcolm J. Crocker and published by John Wiley & Sons. This book was released on 2007-10-05 with total page 1594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two of the most acclaimed reference works in the area of acoustics in recent years have been our Encyclopedia of Acoustics, 4 Volume set and the Handbook of Acoustics spin-off. These works, edited by Malcolm Crocker, positioned Wiley as a major player in the acoustics reference market. With our recently published revision of Beranek & Ver's Noise and Vibration Control Engineering, Wiley is a highly respected name in the acoustics business. Crocker's new handbook covers an area of great importance to engineers and designers. Noise and vibration control is one largest areas of application of the acoustics topics covered in the successful encyclopedia and handbook. It is also an area that has been under-published in recent years. Crocker has positioned this reference to cover the gamut of topics while focusing more on the applications to industrial needs. In this way the book will become the best single source of need-to-know information for the professional markets.

Download or read book Workplace Exposure to Vibration in Europe written by Patrice Donati and published by . This book was released on 2008 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this report is to provide an overview of the challenges facing the occupational safety and health (OSH) community in the context of the application of vibration directive 2002/44/EC of the European Parliament, June 25, 2002. The situation in six member states: Belgium, Germany, Spain, Finland, France and Poland, is examined.

Download or read book Occupational Health Practice written by H A Waldron and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Occupational Health Practice, Third Edition is a comprehensive account of the practice of protecting and improving health in the workplace. Topics covered by this book include pre-placement screening; principles of toxicology; the mental health of people at work; and thermal stresses in occupations. The principles of occupational epidemiology, sickness absence, toxicity testing of industrial chemicals, ergonomics, and the use of protective clothing in the workplace are also discussed. This book is comprised of 28 chapters and begins by outlining developments in occupational health practice, along with the monitoring of occupational diseases. The chapters that follow explore the mental health of people at work and the health effects of vibration, noise, and ionizing radiation in the workplace. The text also considers emergency medical treatment in the workplace; vocational rehabilitation and resettlement of people with disabilities; occupational health services for migrant workers; and special problems in occupational health in developing countries. The final chapter describes health promotion and counseling in the workplace. Suggestions as to how the occupational health professional should deal with perturbations in the health of the worker and workplace are included. This monograph will be of value to occupational health practitioners.

Download or read book Advances in Safety Management and Human Factors written by Pedro M. Arezes and published by Springer. This book was released on 2019-06-05 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest findings on ensuring employees’ safety, health, and welfare at work. It combines a range of disciplines – e.g. work physiology, health informatics, safety engineering, workplace design, injury prevention, and occupational psychology – and presents new strategies for safety management, including accident prevention methods such as performance testing and participatory ergonomics. The book, which is based on the AHFE 2019 International Conference on Safety Management and Human Factors, held on July 24-28, 2019, Washington D.C., USA, provides readers, including decision makers, professional ergonomists and program managers in government and public authorities, with a timely snapshot of the state of the art in the field of safety, health, and welfare management. It also addresses agencies such as the Occupational Safety and Health Administration (OSHA) and the National Institute for Occupational Safety and Health (NIOSH), as well as other professionals dealing with occupational safety and health.

Download or read book HSMV 2023 written by E. Begovic and published by IOS Press. This book was released on 2023-11-09 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: A growing awareness for sustainable mobility and the importance of reducing greenhouse gas emissions call for immediate action in the maritime industry. Technical improvements, such as the hydrodynamic optimization, innovations in energy saving devices, new propulsion systems and power supplies can contribute to such achievements. This challenge is even more demanding for high speed marine craft. This book presents the proceedings of HSMV2023, the 13th International Symposium on High Speed Marine Vehicles, held from 23 to 25 October 2023 in Naples, Italy. The conference attracts academics, researchers, designers, operators and shipowners. It provides a platform for the presentation and discussion of developments in the design, construction and operation of high speed marine vessels. More than 40 submissions were received; 27 papers were selected for presentation and publication in this book after a rigorous review process. The book provides an overview of current innovations and developments, and can be a reference for all those working in the field of high-speed marine vehicles.

Download or read book Cyclostationarity Theory and Methods III written by Fakher Chaari and published by Springer. This book was released on 2017-02-25 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers contributions presented at the 9th Workshop on Cyclostationary Systems and Their Applications, held in Gródek nad Dunajcem, Poland in February 2016. It includes both theory-oriented and practice-oriented chapters. The former focus on heavy-tailed time series and processes, PAR models, rational spectra for PARMA processes, covariance invariant analysis, change point problems, and subsampling for time series, as well as the fraction-of-time approach, GARMA models and weak dependence. In turn, the latter report on case studies of various mechanical systems, and on stochastic and statistical methods, especially in the context of damage detection. The book provides students, researchers and professionals with a timely guide to cyclostationary systems, nonstationary processes and relevant engineering applications.

Download or read book Occupational Safety and Hygiene V written by Pedro M. Arezes and published by CRC Press. This book was released on 2017-03-27 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: Occupational Safety and Hygiene V contains selected contributions from the International Symposium on Occupational Safety and Hygiene (SHO 2017, 10-11 April 2017, Guimarães, Portugal). The contributions focus on a wide range of topics, including: - occupational safety - risk assessment - safety management - ergonomics - management systems - environmental ergonomics - physical environments - construction safety, and - human factors Occupational Safety and Hygiene V is mainly based on research carried out at universities and other research institutions, but also includes practical studies developed by OHS Practitioners within companies. Accordingly, this book will be a helpful text to get acquainted with the state-of-the-art in research in these domains, as well as with some practical tools and approaches that are currently used by OHS professionals worldwide.