Download or read book New and Improved Cutting Tool Materials written by E. Dow Whitney and published by . This book was released on 1969 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: This final report contains the results of a continued effort designed to develop new and improved ceramic cutting tool inserts for the more efficient and economical machining of the refractory hard metals required in the fabrication of aerospace devices. (Author).
Download or read book Fundamentals of Modern Manufacturing written by Mikell P. Groover and published by John Wiley & Sons. This book was released on 2010-01-07 with total page 1027 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers rely on Groover because of the book’s quantitative and engineering-oriented approach that provides more equations and numerical problem exercises. The fourth edition introduces more modern topics, including new materials, processes and systems. End of chapter problems are also thoroughly revised to make the material more relevant. Several figures have been enhanced to significantly improve the quality of artwork. All of these changes will help engineers better understand the topic and how to apply it in the field.
Download or read book Mechanical Engineers Handbook Volume 3 written by Myer Kutz and published by John Wiley & Sons. This book was released on 2015-03-02 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: Full coverage of manufacturing and management in mechanical engineering Mechanical Engineers' Handbook, Fourth Edition provides a quick guide to specialized areas that engineers may encounter in their work, providing access to the basics of each and pointing toward trusted resources for further reading, if needed. The book's accessible information offers discussions, examples, and analyses of the topics covered, rather than the straight data, formulas, and calculations found in other handbooks. No single engineer can be a specialist in all areas that they are called upon to work in. It's a discipline that covers a broad range of topics that are used as the building blocks for specialized areas, including aerospace, chemical, materials, nuclear, electrical, and general engineering. This third volume of Mechanical Engineers' Handbook covers Manufacturing & Management, and provides accessible and in-depth access to the topics encountered regularly in the discipline: environmentally benign manufacturing, production planning, production processes and equipment, manufacturing systems evaluation, coatings and surface engineering, physical vapor deposition, mechanical fasteners, seal technology, statistical quality control, nondestructive inspection, intelligent control of material handling systems, and much more. Presents the most comprehensive coverage of the entire discipline of Mechanical Engineering Focuses on the explanation and analysis of the concepts presented as opposed to a straight listing of formulas and data found in other handbooks Offers the option of being purchased as a four-book set or as single books Comes in a subscription format through the Wiley Online Library and in electronic and other custom formats Engineers at all levels of industry, government, or private consulting practice will find Mechanical Engineers' Handbook, Volume 3 an "off-the-shelf" reference they'll turn to again and again.
Download or read book Metal Cutting written by Paul K. Wright and published by Elsevier. This book was released on 2000-01-19 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal cutting is an essential process throughout engineering design and manufacturing industries. To increase efficiency and reduce costs, it is necessary to improve understanding of the metal cutting process. This book presents a comprehensive treatment of the subject that focuses on the features of the behavior of tool and work materials that influence the efficiency of metal cutting operations. The fourth edition of this acclaimed book has been expanded and revised to include significant changes and additions to metal cutting theory, and to cover developments in tool materials and industrial practice. In particular, improvements in the understanding of the generation of heat and distribution of temperature in the cutting tool are described; a discussion of the structure, properties, and performance of newly developed ceramic tool materials and tool coatings is presented; new information of the machinability of alloys is given; and the introduction of calcium deoxidized steels and their improved machinability are assessed. Additionally, a material selection and design-based approach is expanded upon to improve industrial relevance. Metal Cutting provides invaluable information for those engaged in machining, toolmaking, and related engineering activities, and it serves as a useful introduction to the subject for students of metallurgy and engineering. - Presents a comprehensive treatment of the subject - Includes information on significant changes and additions to metal cutting theory - Offers industrial relevance through a materials selection and and design-based approach
Download or read book Proceedings of the 5th International Symposium Honoring Professor Ian M Ritchie written by Courtney Young and published by John Wiley & Sons. This book was released on 2013-09-19 with total page 1061 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sponsored by The Extraction and Processing Division (EPD) of TMS, The Mineral and Metallurgical Processing Division (MPD) of SME, Metallurgical Society (MetSoc) of CIM 2003 TMS/EPD Fall Meeting held in conjunction with 33rd Annual Hydrometallurgy Meeting and 2003 Conference of Metallurgists Vancouver BC Canada August 24-27,2003.
Download or read book Report of Investigations written by and published by . This book was released on 1991 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vapor phase Reactions to Prepare Titanium Nitride Powder written by Gregory J. Slavens and published by . This book was released on 1992 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Accuracy and Precision of Microseismic Event Locations in Rock Burst Research Studies written by and published by . This book was released on 1992 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Metal Machining and Machine Tools written by Winston A. Knight and published by CRC Press. This book was released on 2019-08-08 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting changes in machining practice, Fundamentals of Machining and Machine Tools, Third Edition emphasizes the economics of machining processes and design for machining. This edition includes new material on super-hard cutting tool materials, tool geometries, and surface coatings. It describes recent developments in high-speed machining, hard machining, and cutting fluid applications such as dry and minimum-quantity lubrication machining. It also presents analytical methods that outline the limitations of various approaches. This edition features expanded information on tool geometries for chip breaking and control as well as improvements in cost modeling of machining processes.
Download or read book Advanced Materials written by Ajit Behera and published by Springer Nature. This book was released on 2021-11-21 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the essential topics in modern materials science. It brings together the spectrum of materials science topics, spanning inorganic and organic materials, nanomaterials, biomaterials, and alloys within a single cohesive and comprehensive resource. Synthesis and processing techniques, structural and crystallographic configurations, properties, classifications, process mechanisms, applications, and related numerical problems are discussed in each chapter. End-of-chapter summaries and problems are included to deepen and reinforce the reader's comprehension. Provides a cohesive and comprehensive reference on a wide range of materials and processes in modern materials science; Presents material in an engaging manner to encourage innovative practices and perspectives; Includes chapter summaries and problems at the end of every chapter for reinforcement of concepts.
Download or read book DeGarmo s Materials and Processes in Manufacturing written by J. T. Black and published by John Wiley & Sons. This book was released on 2020-07-21 with total page 902 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guiding engineering and technology students for over five decades, DeGarmo's Materials and Processes in Manufacturing provides a comprehensive introduction to manufacturing materials, systems, and processes. Coverage of materials focuses on properties and behavior, favoring a practical approach over complex mathematics; analytical equations and mathematical models are only presented when they strengthen comprehension and provide clarity. Material production processes are examined in the context of practical application to promote efficient understanding of basic principles, and broad coverage of manufacturing processes illustrates the mechanisms of each while exploring their respective advantages and limitations. Aiming for both accessibility and completeness, this text offers introductory students a comprehensive guide to material behavior and selection, measurement and inspection, machining, fabrication, molding, fastening, and other important processes using plastics, ceramics, composites, and ferrous and nonferrous metals and alloys. This extensive overview of the field gives students a solid foundation for advanced study in any area of engineering, manufacturing, and technology.
Download or read book Springer Handbook of Mechanical Engineering written by Karl-Heinrich Grote and published by Springer Nature. This book was released on 2020-12-09 with total page 1310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This resource covers all areas of interest for the practicing engineer as well as for the student at various levels and educational institutions. It features the work of authors from all over the world who have contributed their expertise and support the globally working engineer in finding a solution for today‘s mechanical engineering problems. Each subject is discussed in detail and supported by numerous figures and tables.
Download or read book The Effect of Different Natural Flake Graphite Additions on the High temperature Properties of a Dolomite carbon Refractory written by James Philip Bennett and published by . This book was released on 1987 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Excavation Support and Monitoring written by J.A. Hudson and published by Elsevier. This book was released on 2016-04-06 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.850 pages
Download or read book ASM Specialty Handbook written by Joseph R. Davis and published by ASM International. This book was released on 1995-01-01 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: If you are involved with machining or metalworking or you specify materials for industrial components, this book is an absolute must. It gives you detailed and comprehensive information about the selection, processing, and properties of materials for machining and metalworking applications. They include wrought and powder metallurgy tool steels, cobalt base alloys, cemented carbides, cermets, ceramics, and ultra-hard materials. You'll find specific guidelines for optimizing machining productivity through the proper selection of cutting tool materials plus expanded coverage on the use of coatings to extend cutting tool and die life. There is also valuable information on alternative heat treatments for improving the toughness of tool and die steels. All new material on the correlation of heat treatment microstructures and properties of tool steels is supplemented with dozens of photomicrographs. Information on special tooling considerations for demanding applications such as isothermal forging, die casting of metal matrix composites, and molding of corrosive plastics is also included. And you'll learn about alternatives to ferrous materials for metalworking applications such as carbides, cermets, ceramics, and nonferrous metals like aluminum, nickel, and copper base alloys.
Download or read book Advanced Machining Processes of Metallic Materials written by Wit Grzesik and published by Elsevier. This book was released on 2008-01-22 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Machining Processes of Metallic Materials updates our knowledge on the metal cutting processes in relation to theory and industrial practice. In particular, many topics reflect recent developments, e.g. modern tool materials, computational machining, computer simulation of various process phenomena, chip control, monitoring of the cutting state, progressive and hybrid machining operations, and generation and modelling of surface integrity. This book addresses the present state and future development of machining technologies. It provides a comprehensive description of metal cutting theory, experimental and modelling techniques along with basic machining processes and their effective use in a wide range of manufacturing applications. Topics covered include fundamental physical phenomena and methods for their evaluation, available technology of machining processes for specific classes of materials and surface integrity. The book also provides strategies for optimalization techniques and assessment of machinability. Moreover, it describes topics not currently covered in other sources, such as high performance and multitasking (complete) machining with a high potential for increasing productivity, and virtual and e-machining. The research covered here has contributed to a more generalized vision of machining technology, including not only traditional manufacturing tasks but also new potential (emerging) applications such as micro- and nanotechnology. - Many practical examples of modern machining technology - Applicable for various technical, engineering and scientific levels - Collects together 20 years of research in the field and related technical information
Download or read book Advances in Machine Tool Design and Research 1967 written by S. A. Tobias and published by Elsevier. This book was released on 2016-04-19 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Machine Tool Design and Research 1967, Part I covers the proceedings of the 8th International M.T.D.R. conference (incorporating the 2nd international CIRP production engineering research conference) held in the University of Manchester, Institute of Science and Technology on September 1967. The book covers the accuracy of automatically controlled machine tools; the influence of the rigidity of the machine-workpiece-tool system on the roughness of the machined surface; and the analysis of machine tool structure by computing techniques. The text also discusses sensors of tool life for optimization of machining; pre-set tooling and its application; and system 24, a new concept of manufacture. The design of hydrostatic journal bearings; the computer approach for storage of machinability data and calculation of machining costs and production rates; and a comparison of different measuring and indicating methods for the determination of pitch errors of large precision gears are also encompassed. The book further presents the calibration of tool/work thermocouples, as well as the effect of tool flank wear on the temperatures generated during metal cutting.
