Download or read book Mechanical Modeling and Simulation of Porous Polymer Networks written by Hua Deng and published by . This book was released on 2009 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Networks written by Hassan Masoud and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer networks are an important class of materials that are ubiquitously found in natural, biological, and man-made systems. The complex mesoscale structure of these soft materials has made it difficult for researchers to fully explore their properties. In this dissertation, we introduce a coarse-grained computational model for permanently cross-linked polymer networks than can properly capture common properties of these materials. We use this model to study several practical problems involving dry and solvated networks. Specifically, we analyze the permeability and diffusivity of polymer networks under mechanical deformations, we examine the release of encapsulated solutes from microgel capsules during volume transitions, and we explore the complex tribological behavior of elastomers. Our simulations reveal that the network transport properties are defined by the network porosity and by the degree of network anisotropy due to mechanical deformations. In particular, the permeability of mechanically deformed networks can be predicted based on the alignment of network filaments that is characterized by a second order orientation tensor. Moreover, our numerical calculations demonstrate that responsive microcapsules can be effectively utilized for steady and pulsatile release of encapsulated solutes. We show that swollen gel capsules allow steady, diffusive release of nanoparticles and polymer chains, whereas gel deswelling causes burst-like discharge of solutes driven by an outward flow of the solvent initially enclosed within a shrinking capsule. We further demonstrate that this hydrodynamic release can be regulated by introducing rigid microscopic rods in the capsule interior. We also probe the effects of velocity, temperature, and normal load on the sliding of elastomers on smooth and corrugated substrates. Our friction simulations predict a bell-shaped curve for the dependence of the friction coefficient on the sliding velocity. Our simulations also illustrate that at low sliding velocities, the friction decreases with an increase in the temperature. Overall, our findings improve the current understanding of the behavior of polymer networks in equilibrium and non-equilibrium conditions, which has important implications for synthesizing new drug delivery agents, designing tissue engineering systems, and developing novel methods for controlling the friction of elastomers.
Download or read book Modeling and Simulation in Polymers written by Purushottam D. Gujrati and published by John Wiley & Sons. This book was released on 2010-03-30 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling a gap in the literature and all set to become the standard in this field, this monograph begins with a look at computational viscoelastic fluid mechanics and studies of turbulent flows of dilute polymer solutions. It then goes on discuss simulations of nanocomposites, polymerization kinetics, computational approaches for polymers and modeling polyelectrolytes. Further sections deal with tire optimization, irreversible phenomena in polymers, the hydrodynamics of artificial and bacterial flagella as well as modeling and simulation in liquid crystals. The result is invaluable reading for polymer and theoretical chemists, chemists in industry, materials scientists and plastics technologists.
Download or read book Mechanics of Solid Polymers written by Jorgen S Bergstrom and published by William Andrew. This book was released on 2015-07-11 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very few polymer mechanics problems are solved with only pen and paper today, and virtually all academic research and industrial work relies heavily on finite element simulations and specialized computer software. Introducing and demonstrating the utility of computational tools and simulations, Mechanics of Solid Polymers provides a modern view of how solid polymers behave, how they can be experimentally characterized, and how to predict their behavior in different load environments. Reflecting the significant progress made in the understanding of polymer behaviour over the last two decades, this book will discuss recent developments and compare them to classical theories. The book shows how best to make use of commercially available finite element software to solve polymer mechanics problems, introducing readers to the current state of the art in predicting failure using a combination of experiment and computational techniques. Case studies and example Matlab code are also included. As industry and academia are increasingly reliant on advanced computational mechanics software to implement sophisticated constitutive models – and authoritative information is hard to find in one place - this book provides engineers with what they need to know to make best use of the technology available. Helps professionals deploy the latest experimental polymer testing methods to assess suitability for applications Discusses material models for different polymer types Shows how to best make use of available finite element software to model polymer behaviour, and includes case studies and example code to help engineers and researchers apply it to their work
Download or read book Computational Modeling of Polymers written by Jozef Bicerano and published by CRC Press. This book was released on 1992-03-17 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Simulation Methods for Polymers written by Michael Kotelyanskii and published by CRC Press. This book was released on 2004-03-01 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Simulation of Porous Materials written by Kim Jelfs and published by Royal Society of Chemistry. This book was released on 2021-08-31 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Simulation of Porous Materials covers the key approaches in the modelling of porous materials, with a focus on how these can be used for structure prediction and to either rationalise or predict a range of properties including sorption, diffusion, mechanical, spectroscopic and catalytic. The book covers the full breadth of (micro)porous materials, from inorganic (zeolites), to organic including porous polymers and porous molecular materials, and hybrid materials (metal-organic frameworks). Through chapters focusing on techniques for specific types of applications and properties, the book outlines the challenges and opportunities in applying approaches and methods to different classes of systems, including a discussion of high-throughput screening. There is a strong forward-looking focus, to identify where increased computer power or artificial intelligence techniques such as machine learning have the potential to open up new avenues of research. Edited by a world leader in the field, this title provides a valuable resource for not only computational researchers, but also gives an overview for experimental researchers. It is presented at a level accessible to advanced undergraduates, postgraduates and researchers wishing to learn more about the topic.
Download or read book MODELING SIMULATION OF THE M written by XI Wei and published by Open Dissertation Press. This book was released on 2017-01-26 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation, "Modeling and simulation of the mechanical response of biopolymer networks / y Wei Xi" by Xi, Wei, 魏茜, was obtained from The University of Hong Kong (Pokfulam, Hong Kong) and is being sold pursuant to Creative Commons: Attribution 3.0 Hong Kong License. The content of this dissertation has not been altered in any way. We have altered the formatting in order to facilitate the ease of printing and reading of the dissertation. All rights not granted by the above license are retained by the author. Abstract: The mechanical response of live cells is largely determined by the cytoskeleton, a network composed of different types of biopolymers. In addition to maintain structural integrity and stability of cells, cytoskeleton also plays important roles in the processes like intracellular transport, cell division and locomotion. Although extensive effort has been spent in the past few decades trying to study the nonlinear and viscoelastic properties of bio-filament networks both experimentally and theoretically, fundamental questions such as how thermal fluctuations of biopolymers and the deformability as well as the association/dissociation kinetics of crosslinking molecules, "gluing" individual filaments together, dictate the bulk response of a network remain unsettled. To address these important issues, a computational framework for analyzing the mechanical behavior of biopolymer networks was developed in this thesis on the basis of continuum mechanics. Specifically, a combined finite element-Langevin dynamics(FEM-LD)method was first established to capture the influence of thermal undulations of biopolymers. The validity of this new approach was verified by comparing its results with a variety of theoretical predications. In addition, strategies for the implementation of this method in simulating the dynamic response of realistic filamentous networks have also been developed. Interestingly, it was found that entropic effect will be important when the macroscopic strain level is below 1%, beyond which the network response will be dominated by filament elasticity. After that, formulations taking into account the deformability and failure of crosslinking molecules, along with large deflections of individual filaments, were added to the model. It was shown that the stress-strain relationship of random biopolymer networks typically undergoes linear increase -strain hardening -stress serration -total fracture transitions due to the interplay between the bending and stretching of individual filaments and the deformation and breakage of cross-linkers. Furthermore, the network fracture energy was found to reach its minimum when the crosslinking molecules possess intermediate rotational stiffness, reflecting the fact that most of the strain energy will be stored in the distorted filaments with rigid cross-linkers while the imposed deformation will be "evenly" distributed among significantly more crosslinking molecules with high rotational compliance. Finally, the influence of binding/unbinding kinetics of cross-linkers on the rheological response biopolymer networks was examined and three distinct regimes were identified. At high driving frequencies, the bulk network response will be governed by the mechanics of individual filaments, leading to a 3/4 exponent scaling behavior, while stress relaxation induced by the unbinding of crosslinking molecules will dominate the process at intermediate frequencies. In comparison, the collective effect of multiple dissociation of cross-linkers will result in a power-law rheology behavior (with an exponent of 0.5) when the driving frequency is very low, in broad agreement with experimental observations. Subjects: Biopolymers - Mechanical properties
Download or read book Nanopackaging written by James E. Morris and published by Springer. This book was released on 2018-09-22 with total page 996 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive overview of nanoscale electronics and systems packaging, and covers nanoscale structures, nanoelectronics packaging, nanowire applications in packaging, and offers a roadmap for future trends. Composite materials are studied for high-k dielectrics, resistors and inductors, electrically conductive adhesives, conductive "inks," underfill fillers, and solder enhancement. The book is intended for industrial and academic researchers, industrial electronics packaging engineers who need to keep abreast of progress in their field, and others with interests in nanotechnology. It surveys the application of nanotechnologies to electronics packaging, as represented by current research across the field.
Download or read book Modeling and Simulation of the Mechanical Behaviour of Semi crystalline Polymers written by Olivier Gueguen and published by . This book was released on 2008 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the beginning of the XXth century, the plastic materials know a true development thanks to their good mechanical properties and their ease of processing. To estimate better the mechanical properties of these materials, we developed different mechanical models based on their morphology. The semi-crystalline polymer is composed of one crystalline and one amorphous phase with distinct mechanic and thermo-mechanic properties which allow us, by using homogenisation methods, to estimate the effective properties of the material such as its elasticity, its yield stress, its texture evolution... during a mechanical test. Our results are compared to experimental data at different temperatures and strain rates.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Processing written by Tim A. Osswald and published by Hanser Publications. This book was released on 2006 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses traditional polymer processing as well as the emerging technologies associated with the plastics industry in the 21st Century, and combines engineering modeling aspects with computer simulation of realistic polymer processes. This book is designed to provide a polymer processing background to engineering students and practicing engineers. This three-part textbook is written for a two-semester polymer processing series in mechanical and chemical engineering. The first and second part of the book are designed for a senior- to graduate level course, introducing polymer processing, and the third part is for a graduate course on simulation in polymer processing. Throughout the book, many applications are presented in form of examples and illustrations. These will also serve the practicing engineer as a guide when determining important parameters and factors during the design process or when optimizing a process. Examples are presented throughout the book, and problems and solutions are available.
Download or read book Characterisation of Porous Solids VIII written by Nigel Seaton and published by Royal Society of Chemistry. This book was released on 2009-03-10 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book is the Proceedings of the 8th International Symposium on the Characterisation of Porous Solids, known also as "COPS VIII". The conference is one of a series, held every three years, which covers developments in methods for the characterisation of porous materials, and applications of those methods. The scope of the conference: COPS VIII is concerned with fundamental and applied research on the characterisation of the structure of porous materials, and the relationship between structure and material performance. The scope includes experimental characterisation methods such as X-Ray diffraction, NMR, adsorption, mercury intrusion, and calorimetry; theoretical and simulation methods used to interpret experimental data, such as molecular simulation, classical and statistical mechanical theory, and pore network modelling; and applied research on the impact of measured material properties on performance in applications.
Download or read book Porous Polymer Networks written by Vikas Mittal and published by . This book was released on 2019-01-31 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main aim of the book is to assimilate the fundamental know how about the synthesis, properties as well as applications of a large range of recently developed and commercially viable porous polymer networks.
Download or read book Advances in Engineering Materials Structures and Systems Innovations Mechanics and Applications written by Alphose Zingoni and published by CRC Press. This book was released on 2019-08-21 with total page 2435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications comprises 411 papers that were presented at SEMC 2019, the Seventh International Conference on Structural Engineering, Mechanics and Computation, held in Cape Town, South Africa, from 2 to 4 September 2019. The subject matter reflects the broad scope of SEMC conferences, and covers a wide variety of engineering materials (both traditional and innovative) and many types of structures. The many topics featured in these Proceedings can be classified into six broad categories that deal with: (i) the mechanics of materials and fluids (elasticity, plasticity, flow through porous media, fluid dynamics, fracture, fatigue, damage, delamination, corrosion, bond, creep, shrinkage, etc); (ii) the mechanics of structures and systems (structural dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) the numerical modelling and experimental testing of materials and structures (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) innovations and special structures (nanostructures, adaptive structures, smart structures, composite structures, bio-inspired structures, shell structures, membranes, space structures, lightweight structures, long-span structures, tall buildings, wind turbines, etc); (v) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber, glass); (vi) the process of structural engineering (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, testing, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). The SEMC 2019 Proceedings will be of interest to civil, structural, mechanical, marine and aerospace engineers. Researchers, developers, practitioners and academics in these disciplines will find them useful. Two versions of the papers are available. Short versions, intended to be concise but self-contained summaries of the full papers, are in this printed book. The full versions of the papers are in the e-book.
Download or read book Analysis and Modelling of Advanced Structures and Smart Systems written by Holm Altenbach and published by Springer. This book was released on 2017-11-27 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers presented at the 8th International Conference "Design, Modeling and Experiments of Advanced Structures and Systems" (DeMEASS VIII, held in Moscow, Russia in May 2017) and reflects the modern state of sciences in this field. The contributions contain topics like Piezoelectric, Ferroelectric, Ferroelastic and Magnetostrictive Materials, Shape Memory Alloys and Active Polymers, Functionally Graded Materials, Multi-Functional Smart Materials and Structures, Coupled Multi-Field Problems, Design and Modeling of Sensors and Actuators, Adaptive Structures.
Download or read book Nonlinear Finite Elements for Continua and Structures written by Ted Belytschko and published by John Wiley & Sons. This book was released on 2014-01-07 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Finite Elements for Continua and Structures p>Nonlinear Finite Elements for Continua and Structures This updated and expanded edition of the bestselling textbook provides a comprehensive introduction to the methods and theory of nonlinear finite element analysis. New material provides a concise introduction to some of the cutting-edge methods that have evolved in recent years in the field of nonlinear finite element modeling, and includes the eXtended Finite Element Method (XFEM), multiresolution continuum theory for multiscale microstructures, and dislocation- density-based crystalline plasticity. Nonlinear Finite Elements for Continua and Structures, Second Edition focuses on the formulation and solution of discrete equations for various classes of problems that are of principal interest in applications to solid and structural mechanics. Topics covered include the discretization by finite elements of continua in one dimension and in multi-dimensions; the formulation of constitutive equations for nonlinear materials and large deformations; procedures for the solution of the discrete equations, including considerations of both numerical and multiscale physical instabilities; and the treatment of structural and contact-impact problems. Key features: Presents a detailed and rigorous treatment of nonlinear solid mechanics and how it can be implemented in finite element analysis Covers many of the material laws used in today’s software and research Introduces advanced topics in nonlinear finite element modelling of continua Introduction of multiresolution continuum theory and XFEM Accompanied by a website hosting a solution manual and MATLAB® and FORTRAN code Nonlinear Finite Elements for Continua and Structures, Second Edition is a must-have textbook for graduate students in mechanical engineering, civil engineering, applied mathematics, engineering mechanics, and materials science, and is also an excellent source of information for researchers and practitioners.
