Download or read book Mechanical Integrity and Risk Based Inspection of Process Equipment Piping and Pipelines written by Jorge Luis Gonzalez-Velazquez and published by Springer Nature. This book was released on with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidelines for Risk Based Process Safety written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2011-11-30 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidelines for Risk Based Process Safety provides guidelines for industries that manufacture, consume, or handle chemicals, by focusing on new ways to design, correct, or improve process safety management practices. This new framework for thinking about process safety builds upon the original process safety management ideas published in the early 1990s, integrates industry lessons learned over the intervening years, utilizes applicable "total quality" principles (i.e., plan, do, check, act), and organizes it in a way that will be useful to all organizations - even those with relatively lower hazard activities - throughout the life-cycle of a company.
Download or read book Guidelines for Asset Integrity Management written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2017-01-06 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an update and expansion of topics covered in Guidelines for Mechanical Integrity Systems (2006). The new book is consistent with Risk-Based Process Safety and Life Cycle approaches and includes details on failure modes and mechanisms. Also, example testing an inspection programs is included for various types of equipment and systems. Guidance and examples are provided for selecting and maintaining critical safety systems.
Download or read book Mechanical Integrity and Risk Based Inspection of Process Equipment Piping and Pipelines written by Jorge Luis Gonzalez-Velazquez and published by Springer. This book was released on 2024-08-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores Mechanical Integrity (MI) and Risk-Based Inspection (RBI) methodologies, specifically tailored for professionals in chemical, petrochemical, and petroleum refining plants. It starts with foundational aspects of equipment and pipe design and manufacturing within the process industry, followed by an introduction to prevalent damage mechanisms in metal components during service. The book then delves into the general methodology for mechanical integrity analysis, covering remaining life estimation and methods for assessing common defects found in in-service components. It further introduces the principles and overall methodology of Risk-Based Inspection, detailing approaches for evaluating Probability of Failure and Consequences, along with the application of risk matrices to formulate Inspection-Based Risk (IBR) plans. Lastly, it directs attention to the practical implementation of MI and IBR methodologies for managing the integrity of pipelines transporting liquid and gaseous hydrocarbons, aligned with API codes and ASME standards, offering a comprehensive example illustrating the development of an integrity management plan for a real-life pipeline. Through this structured approach, professionals can gain actionable strategies and insights essential for ensuring the safety and reliability of industrial plants and pipelines.
Download or read book Degradation Assessment and Failure Prevention of Pipeline Systems written by Gabriella Bolzon and published by Springer Nature. This book was released on 2020-09-10 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the results of the research project G5055 'Development of novel methods for the prevention of pipeline failures with security implications,' carried out in the framework of the NATO Science for Peace and Security program, and explores the lifecycle assessment of gas infrastructures. Throughout their service lives, pipelines transporting hydrocarbons are exposed to demanding working conditions and aggressive media. In long-term service, material aging increases the risk of damage and failure, which can be accompanied by significant economic losses and severe environmental consequences. This book presents a selection of complementary contributions written by experts operating in the wider fields of pipeline integrity; taken together, they offer a comprehensive portrait of the latest developments in this technological area.
Download or read book Oil and Gas Pipelines written by R. Winston Revie and published by John Wiley & Sons. This book was released on 2015-04-20 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and detailed reference guide on the integrity and safety of oil and gas pipelines, both onshore and offshore Covers a wide variety of topics, including design, pipe manufacture, pipeline welding, human factors, residual stresses, mechanical damage, fracture and corrosion, protection, inspection and monitoring, pipeline cleaning, direct assessment, repair, risk management, and abandonment Links modern and vintage practices to help integrity engineers better understand their system and apply up-to-date technology to older infrastructure Includes case histories with examples of solutions to complex problems related to pipeline integrity Includes chapters on stress-based and strain-based design, the latter being a novel type of design that has only recently been investigated by designer firms and regulators Provides information to help those who are responsible to establish procedures for ensuring pipeline integrity and safety
Download or read book Lees Process Safety Essentials written by Sam Mannan and published by Butterworth-Heinemann. This book was released on 2013-11-12 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lees' Process Safety Essentials is a single-volume digest presenting the critical, practical content from Lees' Loss Prevention for day-to-day use and reference. It is portable, authoritative, affordable, and accessible — ideal for those on the move, students, and individuals without access to the full three volumes of Lees'. This book provides a convenient summary of the main content of Lees', primarily drawn from the hazard identification, assessment, and control content of volumes one and two. Users can access Essentials for day-to-day reference on topics including plant location and layout; human factors and human error; fire, explosion and toxic release; engineering for sustainable development; and much more. This handy volume is a valuable reference, both for students or early-career professionals who may not need the full scope of Lees', and for more experienced professionals needing quick, convenient access to information. - Boils down the essence of Lees'—the process safety encyclopedia trusted worldwide for over 30 years - Provides safety professionals with the core information they need to understand the most common safety and loss prevention challenges - Covers the latest standards and presents information, including recent incidents such as Texas City and Buncefield
Download or read book Petroleum Refining Design and Applications Handbook Volume 5 written by A. Kayode Coker and published by John Wiley & Sons. This book was released on 2023-06-22 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt: PETROLEUM REFINING With no new refineries having been built in decades, companies continue to build onto or reverse engineer and re-tool existing refineries. With so many changes in the last few years alone, books like this are very much in need. There is truly a renaissance for chemical and process engineering going on right now across multiple industries. This fifth and final volume in the “Petroleum Refining Design and Applications Handbook” set, this book continues the most up-to-date and comprehensive coverage of the most significant and recent changes to petroleum refining, presenting the state-of-the-art to the engineer, scientist, or student. Besides the list below, this groundbreaking new volume describes blending of products from the refinery, applying the ternary diagrams and classifications of crude oils, flash point blending, pour point blending, aniline point blending, smoke point and viscosity blending, cetane and diesel indices. The volume further reviews refinery operational cost, cost allocation of actual usage, project and economic evaluation involving cost estimation, cash flow involving return on investment, net present values, discounted cash flow rate of return, net present values, payback period, inflation and sensitivity analysis, and so on. It reviews global effects on the refining economy, carbon tax, carbon foot print, global warming potential, carbon dioxide equivalent, carbon credit, carbon offset, carbon price, and so on. It reviews sustainability in petroleum refining and alternative fuels (biofuels and so on), impact of the overall greenhouse effects, carbon capture and storage in refineries, process intensification in biodiesel, biofuel from green diesel, acid-gas removal and emerging technologies, carbon capture and storage, gas heated reformer unit, pressure swing adsorption process, steam methane reforming for fuel cells, grey, blue and green hydrogen production, new technologies for carbon capture and storage, carbon clean process design, refinery of the future, refining and petrochemical industry characteristics. The text is packed with Excel spreadsheet calculations and Honeywell UniSim Design software in some examples, and it includes an invaluable glossary of petroleum and petrochemical technical terminologies. Useful as a textbook, this is also an excellent, handy go-to reference for the veteran engineer, a volume no chemical or process engineering library should be without. Written by one of the world’s foremost authorities, this book sets the standard for the industry and is an integral part of the petroleum refining renaissance. It is truly a must-have for any practicing engineer or student in this area.
Download or read book Dealing with Aging Process Facilities and Infrastructure written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2018-04-03 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the concept of aging process facilities and infrastructure in high hazard industries and highlights options for dealing with the problem while addressing safety issues This book explores the many ways in which process facilities, equipment, and infrastructure might deteriorate upon continuous exposure to operating and climatic conditions. It covers the functional and physical failure modes for various categories of equipment and discusses the many warning signs of deterioration. Dealing with Aging Process Facilities and Infrastructure also explains how to deal with equipment that may not be safe to operate. The book describes a risk-based strategy in which plant leaders and supervisors can make more informed decisions on aging situations and then communicate them to upper management effectively. Additionally, it discusses the dismantling and safe removal of facilities that are approaching their intended lifecycle or have passed it altogether. Filled with numerous case studies featuring photographs to illustrate the positive and negative experiences of others who have dealt with aging facilities, Dealing with Aging Process Facilities and Infrastructure covers the causes of equipment failures due to aging and their consequences; plant management commitment and responsibility; inspection and maintenance practices for managing life cycle; specific aging asset integrity management practices; and more. Describes symptoms and causal mechanisms of aging in various categories of process equipment Presents key considerations for making informed risk-based decisions regarding the repair or replacement of aging process facilities and infrastructure Discusses practices for managing process facility and infrastructure life cycle Includes examples and case histories of failures related to aging Dealing with Aging Process Facilities and Infrastructure is an important book for industrial practitioners who are often faced with the challenge of managing process facilities and infrastructure as they approach the end of their useful lifecycle.
Download or read book Corrosion and Materials in the Oil and Gas Industries written by Reza Javaherdashti and published by CRC Press. This book was released on 2016-04-19 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advancement of methods and technologies in the oil and gas industries calls for new insight into the corrosion problems these industries face daily. With the application of more precise instruments and laboratory techniques as well as the development of new scientific paradigms, corrosion professionals are also witnessing a new era in the way d
Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Elsevier. This book was released on 2005-01-25 with total page 3708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field
Download or read book Compliance Guidance and Model Risk Management Program for Water Treatment Plants written by Peter S. Puglionesi and published by American Water Works Association. This book was released on 1998 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nondestructive Evaluation of Utilities and Pipelines written by and published by . This book was released on 1998 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidelines for Mechanical Integrity Systems written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2006-08-11 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, process safety management system compliance audits have revealed that organizations often have significant opportunities for improving their Mechanical Integrity programs. As part of the Center for Chemical Process Safety's Guidelines series, Guidelines for Mechanical Integrity Systems provides practitioners a basic familiarity of mechanical integrity concepts and best practices. The book recommends efficient approaches for establishing a successful MI program.
Download or read book Total Quality Safety Management and Auditing written by Michael B. Weinstein and published by Routledge. This book was released on 2018-12-12 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Total Quality Management (TQM) is a business philosophy that yields customer satisfaction and continuous process improvement. This new reference and workbook embraces the TQM revolution and explains to readers how TQM principles are applied to safety and health programs. The text also focuses on the ISO-9000 Quality Program, Voluntary Protection Program, and Process Safety Management. For each of these topics, the key principles are identified and described, and the quality principles are adapted to safety.
Download or read book Proceedings of the 6th International Probabilistic Workshop written by Carl-Alexander Graubner and published by Dirk Proske Verlag. This book was released on 2008 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Risk Assessment written by Lee T. Ostrom and published by John Wiley & Sons. This book was released on 2019-07-09 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guides the reader through a risk assessment and shows them the proper tools to be used at the various steps in the process This brand new edition of one of the most authoritative books on risk assessment adds ten new chapters to its pages to keep readers up to date with the changes in the types of risk that individuals, businesses, and governments are being exposed to today. It leads readers through a risk assessment and shows them the proper tools to be used at various steps in the process. The book also provides readers with a toolbox of techniques that can be used to aid them in analyzing conceptual designs, completed designs, procedures, and operational risk. Risk Assessment: Tools, Techniques, and Their Applications, Second Edition includes expanded case studies and real life examples; coverage on risk assessment software like SAPPHIRE and RAVEN; and end-of-chapter questions for students. Chapters progress from the concept of risk, through the simple risk assessment techniques, and into the more complex techniques. In addition to discussing the techniques, this book presents them in a form that the readers can readily adapt to their particular situation. Each chapter, where applicable, presents the technique discussed in that chapter and demonstrates how it is used. Expands on case studies and real world examples, so that the reader can see complete examples that demonstrate how each of the techniques can be used in analyzing a range of scenarios Includes 10 new chapters, including Bayesian and Monte Carlo Analyses; Hazard and Operability (HAZOP) Analysis; Threat Assessment Techniques; Cyber Risk Assessment; High Risk Technologies; Enterprise Risk Management Techniques Adds end-of-chapter questions for students, and provides a solutions manual for academic adopters Acts as a practical toolkit that can accompany the practitioner as they perform a risk assessment and allows the reader to identify the right assessment for their situation Presents risk assessment techniques in a form that the readers can readily adapt to their particular situation Risk Assessment: Tools, Techniques, and Their Applications, Second Edition is an important book for professionals that make risk-based decisions for their companies in various industries, including the insurance industry, loss control, forensics, all domains of safety, engineering and technical fields, management science, and decision analysis. It is also an excellent standalone textbook for a risk assessment or a risk management course.
