Download or read book Micro hydro Design Manual written by Adam Harvey and published by Intermediate Technology. This book was released on 1993-01 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-Hydro Design Manual has grown from Intermediate Technology's field experiences with micro-hydro installations and covers operation and maintenance, commissioning, electrical power, induction generators, electronic controllers, management, and energy surveys.There is an increasing need in many countries for power supplies to rural areas, partly to support industries, and partly to provide illumination at night. Government authorities are faced with the very high costs of extending electricity grids. Often micro-hydro provides an economic alternative to the grid. This is because independentmicro-hydro schemes save on the cost of grid transmission lines, and because grid extension schemes often have very expensive equipment and staff costs. In contrast, micro-hydro schemes can be designed and built by local staff andsmaller organizations following less strict regulations and using 'off-the-shelf' components or locally made machinery.
Download or read book The Guide to Hydropower Mechanical Design written by American Society of Mechanical Engineers. Hydro Power Technical Committee and published by PennWell Books. This book was released on 1996 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Suitable for individuals who design hydro power facilities, maintain and procure equipment, or produce and distribute electricity, this book presents an overview of some of the best practices.
Download or read book Hydrogenerator Design Manual written by John B. Kirkpatrick and published by . This book was released on 1991 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydropower Engineering Handbook written by John S. Gulliver and published by McGraw-Hill Companies. This book was released on 1991 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidelines for Design of Intakes for Hydroelectric Plants written by and published by American Society of Civil Engineers. This book was released on 1995 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Manufacturing And Mechatronics Proceedings Of The 2015 International Conference Icdmm2015 written by A Mehran Shahhosseini and published by World Scientific. This book was released on 2015-09-23 with total page 1541 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together one hundred and seventy nine selected papers presented at the 2015 International Conference on Design, Manufacturing and Mechatronics (ICDMM2015), which was successfully held in Wuhan, China during April 17-18, 2015.The ICDMM2015 covered a wide range of fundamental studies, technical innovations and industrial applications in advanced design and manufacturing technology, automation and control system, communication system and computer network, signal and image processing, data processing and intelligence system, applied material and material processing technology, power and energy, technology and methods for measure, test, detection and monitoring, applied mechatronics, technology and methods for ship navigation and safety, and other engineering topics.All papers selected here were subjected to a rigorous peer-review process by at least two independent peers. The papers were selected based on innovation, organization, and quality of presentation.The proceedings should be a valuable reference for scientists, engineers and researchers interested in design, manufacturing and mechatronics, as well as graduate students working on related technologies.
Download or read book The Micro hydro Pelton Turbine Manual written by Jeremy Thake and published by Intermediate Technology. This book was released on 2000 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Where flow is limited but high heads of water are available the Pelton wheel is one of the most useful turbines. It can be fabricated in small engineering shops with basic facilities. Jeremy Thake explains how to design, make and use them.
Download or read book Design of Hydroelectric Power Plants Step by Step written by Geraldo Magela Pereira and published by . This book was released on 2021-09-21 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of a hydroelectric plant, along with an installation of transformation of potential energy of water into electricity, is an activity that is not standardized. Each new project is an interesting engineering challenge, and teams need to work in different conditions of each site, integrated to design a functional, economical and environmentally sustainable project. The development of a project, here understood as the plant itself, the reservoir, the maneuver substation and the associated transmission line, is a multidisciplinary activity that encompasses areas of civil engineering, geology, mechanical and electrical engineering, environmental engineering, economic engineering, construction and assembly, and the engineering of operation and maintenance of civil works and electromechanical equipment. The book is organized to facilitate the performance of professional life of the new generations of engineers who will join the Electric Sector, or in other sectors that demand the knowledge regarding hydraulic structures. The book is a simple manual providing the practical step-by-step procedure for designing hydroelectric plants, including legislation, with a general view of the project.
Download or read book Petroleum Refining Design and Applications Handbook Volume 3 written by A. Kayode Coker and published by John Wiley & Sons. This book was released on 2022-06-14 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt: PETROLEUM REFINING The third volume of a multi-volume set of the most comprehensive and up-to-date coverage of the advances of petroleum refining designs and applications, written by one of the world’s most well-known process engineers, this is a must-have for any chemical, process, or petroleum engineer. This volume continues the most up-to-date and comprehensive coverage of the most significant and recent changes to petroleum refining, presenting the state-of-the-art to the engineer, scientist, or student. This book provides the design of process equipment, such as vessels for the separation of two-phase and three-phase fluids, using Excel spreadsheets, and extensive process safety investigations of refinery incidents, distillation, distillation sequencing, and dividing wall columns. It also covers multicomponent distillation, packed towers, liquid-liquid extraction using UniSim design software, and process safety incidents involving these equipment items and pertinent industrial case studies. Useful as a textbook, this is also an excellent, handy go-to reference for the veteran engineer, a volume no chemical or process engineering library should be without. Written by one of the world’s foremost authorities, this book sets the standard for the industry and is an integral part of the petroleum refining renaissance. It is truly a must-have for any practicing engineer or student in this area. This groundbreaking new volume: Assists engineers in rapidly analyzing problems and finding effective design methods and select mechanical specifications Provides improved design manuals to methods and proven fundamentals of process design with related data and charts Covers a complete range of basic day–to–day petroleum refining operations topics with new materials on significant industry changes Includes extensive Excel spreadsheets for the design of process vessels for mechanical separation of two-phase and three-phase fluids Provides UniSim ®-based case studies for enabling simulation of key processes outlined in the book Helps achieve optimum operations and process conditions and shows how to translate design fundamentals into mechanical equipment specifications Has a related website that includes computer applications along with spreadsheets and concise applied process design flow charts and process data sheets Provides various case studies of process safety incidents in refineries and means of mitigating these from investigations by the US Chemical Safety Board Includes a vast Glossary of Petroleum and Technical Terminology
Download or read book Design of Hydroelectric Power Plants Step by Step written by Geraldo Magela Pereira and published by CRC Press. This book was released on 2021-09-20 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of a hydroelectric plant, along with an installation of transformation of potential energy of water into electricity, is an activity that is not standardized. Each new project is an interesting engineering challenge, and teams need to work in different conditions of each site, integrated to design a functional, economical and environmentally sustainable project. The development of a project, here understood as the plant itself, the reservoir, the maneuver substation and the associated transmission line, is a multidisciplinary activity that encompasses areas of civil engineering, geology, mechanical and electrical engineering, environmental engineering, economic engineering, construction and assembly, and the engineering of operation and maintenance of civil works and electromechanical equipment. The book is organized to facilitate the performance of professional life of the new generations of engineers who will join the Electric Sector, or in other sectors that demand the knowledge regarding hydraulic structures. The book is a simple manual providing the practical step-by-step procedure for designing hydroelectric plants, including legislation, with a general view of the project.
Download or read book Military Occupational Specialties Manual MOS Manual written by United States. Marine Corps and published by . This book was released on 1975 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Small Hydropower written by Sunil Kumar Singal and published by Elsevier. This book was released on 2023-02-19 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small Hydropower: Design and Analysis presents a comprehensive guide to the design, operation and maintenance of small hydropower plants. Using detailed diagrams and illustrations, the book examines the classifications, components, equipment, feasibility and analysis of each aspect of SHPs. Following a broad introduction, the book discusses classification approaches based on head, discharge, capacity, etc., analyzes site selection, and gives an overview of key development stages. SHP components for civil engineering works and electro-mechanical equipment have dedicated chapters that are followed by a chapter on how to design new components for the civil, mechanical and electrical aspects of a plant. Subsequent chapters provide guidance on economic and financial analysis, environmental impact, troubleshooting and diagnosis in operating plants, and refurbishment and upgradation of SHPs, when and why this is needed, and how to approach it. Finally, several case studies provide real-world examples of SHPs in operation, giving readers insight into the practical needs of operating SHPs. - Addresses all aspects of small hydropower, including civil works, hydro-mechanical, power generation and distribution, costing and financial analysis, environmental impact, and plant refurbishment and upgrading - Provides dedicated chapters on the environmental and ecological impacts of small hydropower plants - Assesses common problems in SHPs and provides tools for troubleshooting, diagnosis and solutions, including for site-specific issues - Presents detailed real-world case studies showing the application of key aspects of SHP design, operation, maintenance, environmental and ecological assessment, and refurbishment
Download or read book Heat Exchanger Design Handbook Second Edition written by Kuppan Thulukkanam and published by CRC Press. This book was released on 2013-05-20 with total page 1275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely revised and updated to reflect current advances in heat exchanger technology, Heat Exchanger Design Handbook, Second Edition includes enhanced figures and thermal effectiveness charts, tables, new chapter, and additional topics––all while keeping the qualities that made the first edition a centerpiece of information for practicing engineers, research, engineers, academicians, designers, and manufacturers involved in heat exchange between two or more fluids. See What’s New in the Second Edition: Updated information on pressure vessel codes, manufacturer’s association standards A new chapter on heat exchanger installation, operation, and maintenance practices Classification chapter now includes coverage of scrapped surface-, graphite-, coil wound-, microscale-, and printed circuit heat exchangers Thorough revision of fabrication of shell and tube heat exchangers, heat transfer augmentation methods, fouling control concepts and inclusion of recent advances in PHEs New topics like EMbaffle®, Helixchanger®, and Twistedtube® heat exchanger, feedwater heater, steam surface condenser, rotary regenerators for HVAC applications, CAB brazing and cupro-braze radiators Without proper heat exchanger design, efficiency of cooling/heating system of plants and machineries, industrial processes and energy system can be compromised, and energy wasted. This thoroughly revised handbook offers comprehensive coverage of single-phase heat exchangers—selection, thermal design, mechanical design, corrosion and fouling, FIV, material selection and their fabrication issues, fabrication of heat exchangers, operation, and maintenance of heat exchangers —all in one volume.
Download or read book Rules of Thumb for Mechanical Engineers written by J. Edward Pope and published by Gulf Professional Publishing. This book was released on 1997 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluids -- Heat transfer -- Thermodynamics -- Mechanical seals -- Pumps and compressors -- Drivers -- Gears -- Bearings -- Piping and pressure vessels -- Tribology -- Vibration -- Materials -- Stress and strain -- Fatigue -- Instrumentation -- Engineering economics.
Download or read book Automotive Transmissions written by Harald Naunheimer and published by Springer Science & Business Media. This book was released on 2010-11-09 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a full account of the development process for automotive transmissions. Main topics: - Overview of the traffic – vehicle – transmission system - Mediating the power flow in vehicles - Selecting the ratios - Vehicle transmission systems - basic design principles - Typical designs of vehicle transmissions - Layout and design of important components, e.g. gearshifting mechanisms, moving-off elements, pumps, retarders - Transmission control units - Product development process, Manufacturing technology of vehicle transmissions, Reliability and testing The book covers manual, automated manual and automatic transmissions as well as continuously variable transmissions and hybrid drives for passenger cars and commercial vehicles. Furthermore, final drives, power take-offs and transfer gearboxes for 4-WD-vehicles are considered. Since the release of the first edition in 1999 there have been a lot of changes in the field of vehicles and transmissions. About 40% of the second edition’s content is new or revised with new data.
Download or read book The Building Environment written by Vaughn Bradshaw and published by John Wiley & Sons. This book was released on 2010-09-29 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get the updated guide to active and passive control systems for buildings. To capitalize on today's rapidly evolving, specialized technologies, architects, designers, builders, and contractors work together to plan the mechanical and electrical equipment that controls the indoor environment of a building. The Building Environment: Active and Passive Control Systems, Third Edition helps you take advantage of design innovations and construction strategies that maximize the comfort, safety, and energy efficiency of buildings. From active HVAC systems to passive methods, lighting to on-site power generation, this updated edition explains how to strategically plan for and incorporate effective, efficient systems in today's buildings. It covers the underlying thermal theories and thermodynamic principles and focuses on design that enhances the building environment and minimizes the impact on the world's environment. The Building Environment goes beyond the ABCs of HVAC and covers: On-site power generation, including wind turbines, solar photovoltaic cells, fuel cells, and more. Plumbing systems, fire protection, signal systems, conveying systems, and architectural acoustics. Procedures and/or formulas for performing heat loss, heat gain, and energy use calculations, determining the rate of heat flow, calculating solar energy utilization, doing load calculations, and more. Details on the latest building codes and standards references. New information on the sustainable design of building systems and energy efficiency, including new technologies. The latest thinking and data on a building's impact on the environment, indoor air quality, and "sick building syndrome." Design economics, including the payback period, life-cycle cost, comparative value analysis, and building commissioning. A practical on-the-job tool for architects, designers, builders, engineers, contractors, and other specialists, this Third Edition is also a great reference for architecture students who will lead tomorrow's design teams.
Download or read book International Handbook of Earthquake Engineering Seismology Part B written by William H.K. Lee and published by Elsevier. This book was released on 2003-07-23 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two volume International Handbook of Earthquake and Engineering Seismology represents the International Association of Seismology and Physics of the Earth's Interior's (IASPEI) ambition to provide a comprehensive overview of our present knowledge of earthquakes and seismology. This state-of-the-art work is the only reference to cover all aspects of seismology--a "resource library" for civil and structural engineers, geologists, geophysicists, and seismologists in academia and industry around the globe.Part B, by more than 100 leading researchers from major institutions of science around the globe, features 34 chapters detailing strong-motion seismology, earthquake engineering, quake prediction and hazards mitigation, as well as detailed reports from more than 40 nations. Also available is The International Handbook of Earthquake and Engineering Seismology, Part A. - Authoritative articles by more than 100 leading scientists - Extensive glossary of terminology plus 2000+ biographical sketches of notable seismologists
