Download or read book MECHANICAL AND TRIBOLOGICAL CHARACTERISTICS OF AA7010 B4C BN METAL MATRIX NANOCOMPOSITES written by Dr. Gopichand Dirisenapu, Dr. Lingaraju Dumpala & Dr. Seelam Pichi Reddy and published by Laxmi Book Publication. This book was released on 2023-09-01 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present chapter highlights significance of the work done, brief introduction to composite materials and their classification, metal matrix composites, aluminium metal matrix composites (AMMCs), their fabrication methods, mechanical and tribological characteristics, electrical discharge machining (EDM) processes, scope and objective of the work and methodology.
Download or read book Friction Stir Welding and Processing X written by Yuri Hovanski and published by Springer. This book was released on 2019-02-11 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of the recent progress on friction stir technologies including high-temperature applications, industrial applications, dissimilar alloy/materials, lightweight alloys, simulation, control, characterization, and derivative technologies. The volume offers a current look at friction stir welding technology from application to characterization and from modeling to R&D. Contributions document advances in application, controls, and simulation of the friction stir process to aid researchers in seeing the current state-of-the-art.
Download or read book Tribology of Nanocomposites written by Paulo Davim J and published by Springer Science & Business Media. This book was released on 2012-10-28 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides recent information on nanocomposites tribology. Chapter 1 provides information on tribology of bulk polymer nanocomposites and nanocomposite coatings. Chapter 2 is dedicated to nano and micro PTFE for surface lubrication of carbon fabric reinforced polyethersulphone composites. Chapter 3 describes Tribology of MoS2 -based nanocomposites. Chapter 4 contains information on friction and wear of Al2O2 -based composites with dispersed and agglomerated nanoparticles. Finally, chapter 5 is dedicated to wear of multi-scale phase reinforced composites. It is a useful reference for academics, materials and physics researchers, materials, mechanical and manufacturing engineers, both as final undergraduate and postgraduate levels. It is a useful reference for academics, materials and physics researchers, materials, mechanical and manufacturing engineers, both as final undergraduate and postgraduate levels.
Download or read book Advances in the Production and Use of Steel with Improved Internal Cleanliness written by John K. Mahaney and published by ASTM International. This book was released on 1999 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the May 1998 symposium on steel, stainless steel, and related alloys. Emphasizing the effect on the products rather than manufacturing methods, seven papers show that the level of inclusion identification and control through processing improvements is greatly dependent upon the sector
Download or read book Metal Matrix Composites written by T. S. Srivatsan and published by Springer Nature. This book was released on 2021-02-16 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection brings together engineers, scientists, scholars, and entrepreneurs to present their novel and innovative contributions in the domain specific to metal-matrix composites and on aspects specific to modeling, analysis, measurements, and observations specific to microstructural advances. Topics include but are not limited to: · Metals and metal-matrix composites · Nano-metal based composites · Intermetallic-based composites Contributions in the above topics connect to applications in industry-relevant areas: automotive, energy applications, aerospace, failure analysis, biomedical and healthcare, and heavy equipment and machinery.
Download or read book Metallurgy and Design of Alloys with Hierarchical Microstructures written by Krishnan K. Sankaran and published by Elsevier. This book was released on 2017-06-14 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgy and Design of Alloys with Hierarchical Microstructures covers the fundamentals of processing-microstructure-property relationships and how multiple properties are balanced and optimized in materials with hierarchical microstructures widely used in critical applications. The discussion is based principally on metallic materials used in aircraft structures; however, because they have sufficiently diverse microstructures, the underlying principles can easily be extended to other materials systems. With the increasing microstructural complexity of structural materials, it is important for students, academic researchers and practicing engineers to possess the knowledge of how materials are optimized and how they will behave in service. The book integrates aspects of computational materials science, physical metallurgy, alloy design, process design, and structure-properties relationships, in a manner not done before. It fills a knowledge gap in the interrelationships of multiple microstructural and deformation mechanisms by applying the concepts and tools of designing microstructures for achieving combinations of engineering properties—such as strength, corrosion resistance, durability and damage tolerance in multi-component materials—used for critical structural applications. - Discusses the science behind the properties and performance of advanced metallic materials - Provides for the efficient design of materials and processes to satisfy targeted performance in materials and structures - Enables the selection and development of new alloys for specific applications based upon evaluation of their microstructure as illustrated in this work
Download or read book Advances in Friction Stir Welding and Processing written by M.-K. Besharati-Givi and published by Elsevier. This book was released on 2014-12-08 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction-stir welding (FSW) is a solid-state joining process primarily used on aluminum, and is also widely used for joining dissimilar metals such as aluminum, magnesium, copper and ferrous alloys. Recently, a friction-stir processing (FSP) technique based on FSW has been used for microstructural modifications, the homogenized and refined microstructure along with the reduced porosity resulting in improved mechanical properties. Advances in friction-stir welding and processing deals with the processes involved in different metals and polymers, including their microstructural and mechanical properties, wear and corrosion behavior, heat flow, and simulation. The book is structured into ten chapters, covering applications of the technology; tool and welding design; material and heat flow; microstructural evolution; mechanical properties; corrosion behavior and wear properties. Later chapters cover mechanical alloying and FSP as a welding and casting repair technique; optimization and simulation of artificial neural networks; and FSW and FSP of polymers. - Provides studies of the microstructural, mechanical, corrosion and wear properties of friction-stir welded and processed materials - Considers heat generation, heat flow and material flow - Covers simulation of FSW/FSP and use of artificial neural network in FSW/FSP
Download or read book Friction Stir Welding of High Strength 7XXX Aluminum Alloys written by Rajiv S. Mishra and published by Butterworth-Heinemann. This book was released on 2016-06-08 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction Stir Welding of High Strength 7XXX Aluminum Alloys is the latest edition in the Friction Stir series and summarizes the research and application of friction stir welding to high strength 7XXX series alloys, exploring the past and current developments in the field. Friction stir welding has demonstrated significant benefits in terms of its potential to reduce cost and increase manufacturing efficiency of industrial products in transportation, particularly the aerospace sector. The 7XXX series aluminum alloys are the premium aluminum alloys used in aerospace. These alloys are typically not weldable by fusion techniques and considerable effort has been expended to develop friction stir welding parameters. Research in this area has shown significant benefit in terms of joint efficiency and fatigue performance as a result of friction stir welding. The book summarizes those results and includes discussion of the potential future directions for further optimization. - Offers comprehensive coverage of friction stir welding of 7XXX series alloys - Discusses the physical metallurgy of the alloys - Includes physical metallurgy based guidelines for obtaining high joint efficiency - Summarizes the research and application of friction stir welding to high strength 7XXX series alloys, exploring the past and current developments in the field
Download or read book Self Piercing Riveting written by A Chrysanthou and published by Woodhead Publishing. This book was released on 2014-02-14 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to its speed, low energy requirements, and the fact that it does not require a pre-drilled hole, the technique of self-piercing riveting (SPR) has been increasingly adopted by many industries as a high-speed mechanical fastening technique for the joining of sheet material components. Self-piercing riveting comprehensively reviews the process, equipment, and corrosion behaviour of self-piercing riveting, and also describes the process of evaluation and modelling of strength of self-piercing riveted joints, quality control methods and non-destructive testing.Part one provides an extensive overview of the properties of self-piercing riveting. Chapters in this section review the mechanical strength, fatigue, and corrosion behaviour of self-piercing riveted joints. The second part of the book outlines the processing and applications of SPRs, and describes the dynamic strength evaluation/crashworthiness of SPRs, and the modelling of strength of self-piercing riveted joints, before going on to discuss the assessment of the suitability of materials for self-piercing riveting. The concluding chapters describe the quality control and non-destructive testing of self-piercing riveted joints, optimization of the strength of self-piercing rivets, and provides an overview of self-piercing rivets in the automotive industry and the applications of self-piercing riveting in automated vehicle construction.Self-piercing riveting is a standard reference for engineers and designers in the aerospace, materials, welding, joining, automotive and white goods industries, as well as manufacturers of metal components for the automotive, aerospace, white goods and building industries. - Comprehensively reviews the process, equipment, and corrosion behaviour of self-piercing riveting - Describes the process of evaluation and modelling of strength of self-piercing riveted joints, quality control methods and non-destructive testing - Provides an overview of quality, optimization, applications and strength evaluations of self-piercing riveting
Download or read book Diffusion in Materials DIMAT 2011 written by I. Bezverkhyy and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Diffusion in Materials (DIMAT) is the benchmark conference series for diffusion in solids. DIMAT 2011 was organized by the University of Bourgogne in association with CNRS, Dijon (France). The conference showcased new results concerning theoretical tools as well as applied research approaches. Diffusion processes affect all types of materials: nanomaterials, materials for energy, metallurgy, glasses and ceramics, but each requires its own numerical tools.Volume is indexed by Thomson Reuters CPCI-S (WoS). This volume comprises most of the contributions presented at DIMAT 2011: 4 plenary lectures delivered by famous high-level scientists plus 88 contributions in the form of keynote lectures, talks and posters.
Download or read book Zirconium written by Oswald Kubaschewski and published by . This book was released on 1976 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transactions and Journal of the British Ceramic Society written by British Ceramic Society and published by . This book was released on 1911 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. for 1971-74, include a separate section with title: British ceramic abstracts, prepared by the British Ceramic Research Association, also issued separately.
Download or read book Friction Stir Welding of Dissimilar Alloys and Materials written by Nilesh Kulkarni and published by Butterworth-Heinemann. This book was released on 2015-03-05 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will summarize research work carried out so far on dissimilar metallic material welding using friction stir welding (FSW). Joining of dissimilar alloys and materials are needed in many engineering systems and is considered quite challenging. Research in this area has shown significant benefit in terms of ease of processing, material mixing, and superior mechanical properties such as joint efficiencies. A summary of these results will be discussed along with potential guidelines for designers. - Explains solid phase process and distortion of work piece - Addresses dimensional stability and repeatability - Addresses joint strength - Covers metallurgical properties in the joint area - Covers fine microstructure - Introduces improved materials use (e.g., joining different thicknesses) - Covers decreased fuel consumption in light weight aircraft - Addresses automotive and ship applications
Download or read book Non Linear Phenomena in Materials Science II written by G. Martin and published by . This book was released on 1992 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the main characteristics of materials science is that it deals with properties which often deviate from linear relationships when compared with such parameters as temperature, pressure, and concentration. The reasons for this behavior of materials are twofold: the speed of linear reaction can vary greatly, and abrupt changes may occur in the static or dynamic states of self-organisation.
Download or read book Nanostructured Materials written by T. Daniel Thangadurai and published by Springer Nature. This book was released on 2020-02-27 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the early stages of the development of nanostructures, including synthesis techniques, growth mechanisms, the physics and chemistry of nanostructured materials, various innovative characterization techniques, the need for functionalization and different functionalization methods as well as the various properties of nanostructured materials. It focuses on the applications of nanostructured materials, such as mechanical applications, nanoelectronics and microelectronic devices, nano-optics, nanophotonics and nano-optoelectronics, as well as piezoelectric, agriculture, biomedical and, environmental remediation applications, and anti-microbial and antibacterial properties. Further, it includes a chapter on nanomaterial research developments, highlighting work on the life-cycle analysis of nanostructured materials and toxicity aspects.
Download or read book Materials for Potential EMI Shielding Applications written by Kuruvilla Joseph and published by Elsevier. This book was released on 2019-11-01 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Potential EMI Shielding Applications: Processing, Properties and Current Trends extensively and comprehensively reviews materials for EMI shielding applications, ranging from the principles to possible applications and various types of shielding materials. The book provides a thorough introduction to electromagnetic interference, its effect on both the environment and other electronic items, various materials that are used for electromagnetic interference shielding applications, and its properties. It explains the mechanism behind EMI shielding, the methods by which EMI SE of a given material is estimated, and the different fabrication methods currently employed for fabricating EMI shielding materials. Final sections focus on the theoretical background of EMI shielding and shielding mechanisms. This theoretical background is extended to the physics of EMI shielding, wherein the physics behind mechanism of shielding is explained. - Focuses on the different types of available EMI shielding, their applications, processing, characterization, and the mechanism behind their shielding - Discusses how to incorporate EMI shielding with low cost, low density and high strength - Provides an understanding and clarifies both elementary and practical problems relating to EMI shielding materials
Download or read book Lightweight Materials written by Flake C. Campbell and published by ASM International. This book was released on 2012-01-01 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt:
