Download or read book Mechanical and Microstructural Characteristics of an Al Li Cu Zr Alloy During Superplastic Deformation written by Binyan Ren and published by . This book was released on 1991 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Deformation Characteristics and Microstructural Dynamics of an AL 10MG 0 1ZR Alloy written by and published by . This book was released on 1992 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: An investigation into microstructural evolution during processing and superplastic deformation of an Al-10Mg-0.1Zr alloy was conducted. Processing schedules were modified to enhance particle-stimulated nucleation of recrystallization and refine subsequent gain size. Strain rates varying over three orders of magnitude were utilized in subsequent testing of processed material. At lower strain rates of about 10-4 sec-1 coarsening of the microstructure was apparent and elongations of 277% were obtained. A strain rate of 10-3 sec-1 resulted in lesser coarsening and elongations of 650%. A model of deformation by grain boundary sliding in association with microstructural coarsening is presented.

Download or read book Fundamentals of Aluminium Metallurgy written by Roger Lumley and published by Elsevier. This book was released on 2010-11-25 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium is an important metal in manufacturing, due to its versatile properties and the many applications of both the processed metal and its alloys in different industries. Fundamentals of aluminium metallurgy provides a comprehensive overview of the production, properties and processing of aluminium, and its applications in manufacturing industries.Part one discusses different methods of producing and casting aluminium, covering areas such as casting of alloys, quality issues and specific production methods such as high-pressure diecasting. The metallurgical properties of aluminium and its alloys are reviewed in Part two, with chapters on such topics as hardening, precipitation processes and solute partitioning and clustering, as well as properties such as fracture resistance. Finally, Part three includes chapters on joining, laser sintering and other methods of processing aluminium, and its applications in particular areas of industry such as aerospace.With its distinguished editor and team of expert contributors, Fundamentals of aluminium metallurgy is a standard reference for researchers in metallurgy, as well as all those involved in the manufacture and use of aluminium products. - Provides a comprehensive overview of the production, properties and processing of aluminium, and its applications in manufacturing industries - Considers many issues of central importance in aluminium production and utilization considering quality issues and design for fatigue growth resistance - Metallurgical properties of aluminium and its alloys are further explored with particular reference to work hardening and applications of industrial alloys

Download or read book Effects of Alloy Chemistry on Superplastic Forming of Rapid Solidification Processed Aluminum Lithium Alloys written by RJ. Lederich and published by . This book was released on 1986 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: The superplastic forming characteristics of rapid-solidification-processed (RSP) Al-3Li-based alloys containing varying amounts of copper, magnesium, cobalt, and zirconium and processed by different thermomechanical sequences were investigated. Their final microstructures were strongly dependent on the processing treatment and alloy composition. All the zirconium-containing alloys were processed to have a fine subgrain microstructure. These alloys deform predominantly by dislocation glide and climb processes and by subgrain boundary motion, and they exhibit up to 400% elongation, which is sufficient for many commercial forming applications. Cavitation was suppressed, and the mechanical properties were not affected by forming. A thermomechanical processing sequence was established that develops a completely recrystallized fine grain microstructure in the Al-Li-Cu-Zr alloys. The alloys with this recrystallized microstructure have excellent formability.

Download or read book Superplastic Formability of Al Cu Li Alloy Weldalite Tm 049 written by National Aeronautics and Space Adm Nasa and published by . This book was released on 2018-11-10 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensive research during the past decade shows that several aluminum lithium alloys can be processed to attain a microstructure that enables superplasticity. The high tensile stress of Al-Cu-Li alloy Weldalite (TM) 049 in the T4 and T6 tempers offers tremendous potential for attaining exceptional post-SPF (superplastic formability) properties. The used SPF material is Weldalite, which was shown to induce SPF behavior in other Al-Cu-Li alloys. The superplastic behavior and resulting post-SPF mechanical properties of this alloy, which was designed to be the next major structural alloy for space applications, were evaluated. The results indicate that Weldalite alloy does indeed exhibit excellent superplasticity over a wide range of temperatures and strain rates and excellent post-SPF tensile strength at various potential service temperatures. Ma, Bao-Tong and Pickens, Joseph R. Unspecified Center...

Download or read book Aluminum Lithium Alloys written by N Eswara Prasad and published by Butterworth-Heinemann. This book was released on 2013-09-20 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because lithium is the least dense elemental metal, materials scientists and engineers have been working for decades to develop a commercially viable aluminum-lithium (Al-Li) alloy that would be even lighter and stiffer than other aluminum alloys. The first two generations of Al-Li alloys tended to suffer from several problems, including poor ductility and fracture toughness; unreliable properties, fatigue and fracture resistance; and unreliable corrosion resistance. Now, new third generation Al-Li alloys with significantly reduced lithium content and other improvements are promising a revival for Al-Li applications in modern aircraft and aerospace vehicles. Over the last few years, these newer Al-Li alloys have attracted increasing global interest for widespread applications in the aerospace industry largely because of soaring fuel costs and the development of a new generation of civil and military aircraft. This contributed book, featuring many of the top researchers in the field, is the first up-to-date international reference for Al-Li material research, alloy development, structural design and aerospace systems engineering. - Provides a complete treatment of the new generation of low-density AL-Li alloys, including microstructure, mechanical behavoir, processing and applications - Covers the history of earlier generation AL-Li alloys, their basic problems, why they were never widely used, and why the new third generation Al-Li alloys could eventually replace not only traditional aluminum alloys but more expensive composite materials - Contains two full chapters devoted to applications in the aircraft and aerospace fields, where the lighter, stronger Al-Li alloys mean better performing, more fuel-efficient aircraft

Download or read book Superplasticity in Metals and Ceramics written by T. G. Nieh and published by Cambridge University Press. This book was released on 1997-01-23 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes advances in the field of superplasticity, the ability of certain materials to undergo very large tensile strains. This phenomenon has increasing commercial applications, but also presents a fascinating scientific challenge in attempts to understand the physical mechanisms that underpin it. The authors emphasize the materials aspects of superplasticity. Beginning with a brief history of the phenomenon, they describe the two major types of superplasticity-- fine-structure and internal-stress superplasticity-- and discuss their operative mechanisms. They also present microstructural factors controlling the ductility and fracture in superplastic materials. Observations of superplasticity in metals (including aluminum, magnesium, iron, titanium and nickel), ceramics (including monoliths and composites), intermetallics (including iron, nickel, and titanium base), and laminates are thoroughly described. This is a valuable text for graduate students and researchers in materials science and engineering.

Download or read book Mechanical Property Microstructural and Textural Development During the High Temperature Slow Strain Rate Deformation of Al Li Cu Mg Zr Alloy AA8090 written by Paul Leslie Blackwell and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals of Aluminium Metallurgy written by Roger Lumley and published by Woodhead Publishing. This book was released on 2018-05-22 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Aluminium Metallurgy: Recent Advances updates the very successful book Fundamentals of Aluminium Metallurgy. As the technologies related to casting and forming of aluminum components are rapidly improving, with new technologies generating alternative manufacturing methods that improve competitiveness, this book is a timely resource. Sections provide an overview of recent research breakthroughs, methods and techniques of advanced manufacture, including additive manufacturing and 3D printing, a comprehensive discussion of the status of metalcasting technologies, including sand casting, permanent mold casting, pressure diecastings and investment casting, and recent information on advanced wrought alloy development, including automotive bodysheet materials, amorphous glassy materials, and more. Target readership for the book includes PhD students and academics, the casting industry, and those interested in new industrial opportunities and advanced products. - Includes detailed and specific information on the processing of aluminum alloys, including additive manufacturing and advanced casting techniques - Written for a broad ranging readership, from academics, to those in the industry who need to know about the latest techniques for working with aluminum - Comprehensive, up-to-date coverage, with the most recent advances in the industry

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effect of Strain and Strain Rate on the Microstructure of a Superplastically Deformed Al 10 Mg 0 1 Zr Alloy written by M. E. Alcamo and published by . This book was released on 1985 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: The deformation characteristics of two thermomechanically processed, high-Magnesium, Aluminum-Magnesium-Zirconium alloys were investigated. The processing included warm rolling at 300 C to 90-95% reduction. Tension testing was done at various temperatures and strain rates and superplastic elongations were observed for both alloys. Subsequently, samples of A1-10%Mg-0.1% Zr were tested at 300 C to strains ranging from 8% to 267% as well as to fracture. Strain rates of .00667/S and .000667/s were used. These were examined via TEM to observe microstructural changes which occur during deformation. Quantitative analysis of the functional relationship between stress, strain, strain rate, and grain size for this alloy is done in an attempt to fit it's deformation response to current models for superplastic deformation.

Download or read book Proceedings of the International Conference on Advanced Mechanical Engineering Automation and Sustainable Development 2021 AMAS2021 written by Banh Tien Long and published by Springer Nature. This book was released on 2022-05-03 with total page 982 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected, peer-reviewed proceedings of the International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development 2021 (AMAS2021), held in the city of Ha Long, Vietnam, from November 4 to 7, 2021. AMAS2021 is a special meeting of the International Conference on Material, Machines and Methods for Sustainable Development (MMMS), with a strong focus on automation and fostering an overall approach to assist policy makers, industries, and researchers at various levels to position local technological development toward sustainable development. The contributions published in this book stem from a wide spectrum of research, ranging from micro- and nanomaterial design and processing, to special applications in mechanical technology, environmental protection, green development, and climate change mitigation. A large group of contributions selected for these proceedings also focus on modeling and manufacturing of ecomaterials.

Download or read book Early Microstructural Evolution and Deformation Behavior in Solution Heat Treated Aluminum lithium Alloys written by Shelly Midori Miyasato and published by . This book was released on 1991 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effect of Sc and Zr on Microstructure and Mechanical Properties of As Cast Al Li Cu Alloys written by and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanical Characteristics of a Superplastic Aluminum 10 2 Mg 0 1 Zr Alloy written by T. S. Hartmann and published by . This book was released on 1985 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: The elevated temperature mechanical characteristics of an aluminum-magnesium-zirconium alloy were studied. Thermomechanical processing consisted of solution treating and hot working at 440 C and then warm rolling at 300 C to 94% reduction. Subsequent treatments included annealing at 200 C for one hour, and recrystallizing for one minute at 440 C. Tensile testing of warm rolled, annealed, and recrystallized material was conducted at various strain rates and temperatures. The data was analyzed to determine strain-rate sensitivity coefficients and activation energies, in turn to be correlated with microstructural data concurrently obtained on this superplastic alloy. This material exhibits particularly good ambient properties in addition to the superplasticity. Originator supplied keywords include: Aluminum; Aluminum-Magnesium alloys, Creep models.

Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Heat Treatment Response Found in an Al Li Cu Mg Zr Alloy Following Superplastic Deformation written by Robert D. Tucker and published by . This book was released on 1989 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: