Download or read book Measuring Strategies in Tactile Coordinate Metrology written by Robert Roithmeier and published by Carl Zeiss AG. This book was released on 2014-10-24 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, there is hardly any workpiece whose form parameters cannot be measured by means of coordinate measuring machines. The universal use of these machines allows a wide range of application of this technology which, however, increases inevitably the complexity of its handling. The numerous options of the machine-specific operating software on the one hand and the various theoretical considerations regarding a target-oriented treatment of measuring jobs on the other hand result in the fact that the measuring results obtained from the same coordinate measuring machine on the same workpiece under similar conditions may differ. In Order to increase the comparability of measuring results, it is necessary to provide the operators of coordinate measuring machines –in addition to a well-founded AUKOM training – with procedure options for planning, performing, evaluating and documenting measurements. This book by the ZEISS Metrology Academy makes a contribution towards achieving these targets.
Download or read book Cookbook Measuring Strategies for tactile Coordinate Metrology written by ZEISS Academy Metrology and published by Carl Zeiss AG. This book was released on 2017-06-01 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Cookbook “Measuring Strategies for tactile Coordinate Metrology” includes some of the most common measuring tasks (as evaluated in a study by the Global Application Knowledge Group). These default “recipes” are a good place to start when there is no additional information provided for measurement. They are general suggestions. When more is known about the process and the function of the part, the recipes can be modified to better fit the application.
Download or read book Industrial Metrology for Medical Products and Devices written by Robert Roithmeier and published by Carl Zeiss AG. This book was released on with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medical progress is associated with innovative product developments in medical technology, e.g. for different implants and instruments. The developments are also characterized by increasing miniaturization and precision. Hence the demands on the geometric and surface characteristics of the usually complex form elements are growing. Consequently, the need for highly-accurate dimensional inspection for the verification of these characteristics is rapidly increasing. ZEISS successfully and reliably faces these challenges. Being a leading manufacturer of medical technology as well as of measurement and inspection technology, the company ZEISS has a high level of know-how in the industrial production of medical devices and products. This book presents the metrological solutions for the medical technology and explains their application. The required measuring machines and the task-based sensors are addressed to the same extent as the challenges regarding automated 100 % checks. Methods for checking the reliability of measuring results and evaluating the inspection process quality are presented and the required procedures are described in detail. The extended regulations for medical devices and products, e.g. by FDA and MDR, place high demands on the measurement technology used and on the electronic documentation of measurement results. This is addressed in detail at the end of the book; in the appendix, easy-to-use checklists for the regulations according to 21 CFR Part 11 are provided.
Download or read book Industrial Metrology for the Aviation Industry written by Robert Roithmeier and published by Carl Zeiss AG. This book was released on with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quality assurance in aviation and space industry poses extraordinary challenges for measurement engineers. High standards for safety-critical parts must be maintained without reducing manufacturing speed and overall productivity. At the same time, the demands on the aerospace industry to develop aircraft that are as fuel-efficient and quiet as possible have increased enormously. And the aerospace industry wants to meet these requirements, whether in terms of noise emissions or fuel consumption. This is where industrial metrology with all its inspection capabilities, sensors and software solutions can make a valuable contribution. These possibilities are shown in this book. The demands placed on the aerospace industry are reinforced by strict regulations and approval processes – including additional specifications, traceability, conformity and certification standards. Be it EN/AS 9100, NadCap, test procedures according to AS 13003, 13006, EN/AS 9138 or others, the implementation of these procedures with coordinate measuring systems is part of this book.
Download or read book Proceedings of the 12th International Conference on Measurement and Quality Control Cyber Physical Issue written by Vidosav D. Majstorovic and published by Springer. This book was released on 2019-05-03 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 12th International Conference on Measurement and Quality Control – Cyber Physical Issues (IMEKO TC 14 2019), held in Belgrade, Serbia, on 4–7 June 2019. The event marks the latest in a series of high-level conferences that bring together experts from academia and industry to exchange knowledge, ideas, experiences, research findings, and information in the field of measurement of geometrical quantities. The book addresses a wide range of topics, including: 3D measurement of GPS characteristics, measurement of gears and threads, measurement of roughness, micro- and nano-metrology, laser metrology for precision measurements, cyber physical metrology, optical measurement techniques, industrial computed tomography, multisensor techniques, intelligent measurement systems, evaluating measurement uncertainty, dimensional management in industry, product quality assurance methods, and big data analytics. By providing updates on key issues and highlighting recent advances in measurement and quality control, the book supports the transfer of vital knowledge to the next generation of academics and practitioners.
Download or read book Introduction to Quantum Metrology written by Waldemar Nawrocki and published by Springer. This book was released on 2015-03-24 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the theory of quantum effects used in metrology and results of the author’s own research in the field of quantum electronics. The book provides also quantum measurement standards used in many branches of metrology for electrical quantities, mass, length, time and frequency. This book represents the first comprehensive survey of quantum metrology problems. As a scientific survey, it propagates a new approach to metrology with more emphasis on its connection with physics. This is of importance for the constantly developing technologies and nanotechnologies in particular. Providing a presentation of practical applications of the effects used in quantum metrology for the construction of quantum standards and sensitive electronic components, the book is useful for a wide audience of physicists and metrologists in the broad sense of both terms. In 2014 a new system of units, the so called Quantum SI, is introduced. This book helps to understand and approve the new system to both technology and academic community.
Download or read book Development of an Automated Guidance and Dynamic Measurement System for Coordinate Measuring Machines and Robotic Devices written by Kam Chiu Lau and published by . This book was released on 1981 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Vision Metrology written by Sabry F. El-Hakim and published by . This book was released on 1991 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coordinate Measuring Machines and Systems written by Robert J. Hocken and published by CRC Press. This book was released on 2016-04-19 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since John Bosch edited and published the first version of this book in 1995, the world of manufacturing and coordinate measuring machines (CMMs) and coordinate measuring systems (CMSs) has changed considerably. However, the basic physics of the machines has not changed in essence but have become more deeply understood. Completely revised and updat
Download or read book 1988 International Conference on Computer Integrated Manufacturing Rensselaer Polytechnic Institute Troy New York May 23 25 1988 written by and published by . This book was released on 1988 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Teaching Strategies GOLD written by Cate Heroman and published by . This book was released on 2010 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Three dimensional and Unconventional Imaging for Industrial Inspection and Metrology written by Kevin G. Harding and published by SPIE-International Society for Optical Engineering. This book was released on 1996 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geometrical Dimensioning and Tolerancing for Design Manufacturing and Inspection written by Georg Henzold and published by Elsevier. This book was released on 2006-10-13 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geometrical tolerancing is used to specify and control the form, location and orientation of the features of components and manufactured parts. This book presents the state of the art of geometrical tolerancing, covers the latest ISO and ANSI/ASME standards and is a comprehensive reference and guide for all professional engineers, designers, CAD users, quality managers and anyone involved in the creation or interpretation of CAD plans or engineering designs and specifications. For all design and manufacturing engineers working with these internationally required design standards Covers ISO and ANSI geometrical tolerance standards, including the 2005 revisions to the ISO standard Geometrical tolerancing is used in the preparation and interpretation of the design for any manufactured component or item: essential information for designers, engineers and CAD professionals
Download or read book Information Modeling for Interoperable Dimensional Metrology written by Y Zhao and published by Springer. This book was released on 2011-08-29 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dimensional metrology is an essential part of modern manufacturing technologies, but the basic theories and measurement methods are no longer sufficient for today's digitized systems. The information exchange between the software components of a dimensional metrology system not only costs a great deal of money, but also causes the entire system to lose data integrity. Information Modeling for Interoperable Dimensional Metrology analyzes interoperability issues in dimensional metrology systems and describes information modeling techniques. It discusses new approaches and data models for solving interoperability problems, as well as introducing process activities, existing and emerging data models, and the key technologies of dimensional metrology systems. Written for researchers in industry and academia, as well as advanced undergraduate and postgraduate students, this book gives both an overview and an in-depth understanding of complete dimensional metrology systems. By covering in detail the theory and main content, techniques, and methods used in dimensional metrology systems, Information Modeling for Interoperable Dimensional Metrology enables readers to solve real-world dimensional measurement problems in modern dimensional metrology practices.
Download or read book Good Strategy Bad Strategy written by Richard Rumelt and published by Currency. This book was released on 2011-07-19 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good Strategy/Bad Strategy clarifies the muddled thinking underlying too many strategies and provides a clear way to create and implement a powerful action-oriented strategy for the real world. Developing and implementing a strategy is the central task of a leader. A good strategy is a specific and coherent response to—and approach for—overcoming the obstacles to progress. A good strategy works by harnessing and applying power where it will have the greatest effect. Yet, Rumelt shows that there has been a growing and unfortunate tendency to equate Mom-and-apple-pie values, fluffy packages of buzzwords, motivational slogans, and financial goals with “strategy.” In Good Strategy/Bad Strategy, he debunks these elements of “bad strategy” and awakens an understanding of the power of a “good strategy.” He introduces nine sources of power—ranging from using leverage to effectively focusing on growth—that are eye-opening yet pragmatic tools that can easily be put to work on Monday morning, and uses fascinating examples from business, nonprofit, and military affairs to bring its original and pragmatic ideas to life. The detailed examples range from Apple to General Motors, from the two Iraq wars to Afghanistan, from a small local market to Wal-Mart, from Nvidia to Silicon Graphics, from the Getty Trust to the Los Angeles Unified School District, from Cisco Systems to Paccar, and from Global Crossing to the 2007–08 financial crisis. Reflecting an astonishing grasp and integration of economics, finance, technology, history, and the brilliance and foibles of the human character, Good Strategy/Bad Strategy stems from Rumelt’s decades of digging beyond the superficial to address hard questions with honesty and integrity.
Download or read book Business Performance Measurement written by Andy Neely and published by Cambridge University Press. This book was released on 2002-03-07 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: A multidisciplinary book on performance measurement that will appeal to students, researchers and managers.
Download or read book Probabilistic Robotics written by Sebastian Thrun and published by MIT Press. This book was released on 2005-08-19 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the techniques and algorithms of the newest field in robotics. Probabilistic robotics is a new and growing area in robotics, concerned with perception and control in the face of uncertainty. Building on the field of mathematical statistics, probabilistic robotics endows robots with a new level of robustness in real-world situations. This book introduces the reader to a wealth of techniques and algorithms in the field. All algorithms are based on a single overarching mathematical foundation. Each chapter provides example implementations in pseudo code, detailed mathematical derivations, discussions from a practitioner's perspective, and extensive lists of exercises and class projects. The book's Web site, www.probabilistic-robotics.org, has additional material. The book is relevant for anyone involved in robotic software development and scientific research. It will also be of interest to applied statisticians and engineers dealing with real-world sensor data.
